Search found 17 matches

by Hefeweizen
Mon Sep 25, 2023 6:33 pm
Forum: Tech Forum
Topic: Blower motor fuse?
Replies: 5
Views: 3050

Re: Blower motor fuse?

Thanks Mike! The PO actually soldered a new, flat fuse in there and the connection was lose. When I bumped into it, the blower started going. Not sure how to get the AC going. It is only the upper fan that runs
by Hefeweizen
Mon Sep 25, 2023 8:30 am
Forum: Tech Forum
Topic: Blower motor fuse?
Replies: 5
Views: 3050

Re: Blower motor fuse?

Thanks! Stupid me did not even think about looking in the book! I just looked on the fuse box cover. The fan motor runs great, had it out and bench tested. I rule out anything in the HVAC Panbel since I swapped it out with another one. Of course there is the possibility that the other one is also br...
by Hefeweizen
Sun Sep 24, 2023 12:58 pm
Forum: Tech Forum
Topic: Blower motor fuse?
Replies: 5
Views: 3050

Blower motor fuse?

The blower on my 1981 6er (E12 based) stopped working and I thought it may be the fuse Problem is that I can't find the fuse that would cover that in the fuse box.
by Hefeweizen
Mon May 31, 2021 6:59 am
Forum: Tech Forum
Topic: Windshield wiper relay?
Replies: 2
Views: 1293

Re: Windshield wiper relay?

Thanks! Will have to check it out.
by Hefeweizen
Sun May 30, 2021 5:50 pm
Forum: Tech Forum
Topic: Windshield wiper relay?
Replies: 2
Views: 1293

Windshield wiper relay?

Is there a windshield wiper relay at all?
by Hefeweizen
Sun Sep 13, 2020 8:41 am
Forum: Tech Forum
Topic: TPS Adjustment
Replies: 2
Views: 2035

Re: TPS Adjustment

Thanks! It's always easy when you know how :lol:
by Hefeweizen
Sun Sep 06, 2020 7:08 pm
Forum: Tech Forum
Topic: TPS Adjustment
Replies: 2
Views: 2035

TPS Adjustment

Does anyone know by any chance how to adjust the Throttle Position Sensor on a M90 Ljet engine? E24 is easy since you can hear a click
by Hefeweizen
Sun Sep 15, 2019 10:45 pm
Forum: Tech Forum
Topic: Turn signal relay part #1364654
Replies: 0
Views: 12256

Turn signal relay part #1364654

Where do you guys source this part (1364654) without paying an arm and a leg?
by Hefeweizen
Mon Nov 05, 2018 1:50 pm
Forum: Tech Forum
Topic: Strange Stall/ No Start - Overheated coil?
Replies: 22
Views: 16492

Re: Strange Stall/ No Start - Overheated coil?

Tom,

I have a good ECU that you can try out if you like. Could also be your FPR?
by Hefeweizen
Sat Apr 21, 2018 1:05 pm
Forum: Tech Forum
Topic: Not the AFM but what?
Replies: 6
Views: 4164

Re: Not the AFM but what?

Red cable has power :( Would have been too easy!
by Hefeweizen
Sat Apr 21, 2018 9:06 am
Forum: Tech Forum
Topic: Not the AFM but what?
Replies: 6
Views: 4164

Re: Not the AFM but what?

Thank you all for your input. I have to admit that I have not checked the red cable going directly (well, via the ignition switch) to the double relay (http://www.house-calls.us/images/1980_633_EL123.jpg). This is after all where the power comes from. I'll check that and report my findings later.
by Hefeweizen
Thu Apr 19, 2018 9:44 am
Forum: Tech Forum
Topic: Not the AFM but what?
Replies: 6
Views: 4164

Not the AFM but what?

I thought that my AFM (Part #13621359641 -Bosch #0280203002) died since it looked like it no longer sends a signal to the double relay (1979 M90 L Jet engine) and hence the car does not run anymore. I do have continuity from the battery to the fuse box and again to the double relay and continued fro...
by Hefeweizen
Fri Apr 06, 2018 9:16 am
Forum: Tech Forum
Topic: AFM Interchange
Replies: 3
Views: 2679

Re: AFM Interchange

Thanks and sorry T Hanson but in this case you cannot consult realoem .com for the part numbers since those are Bosch part numbers that are not listed. If an AFM looks similar is also not an option since I am looking for a L Jet AFM but I have a few AFM that come from a Motronic engine. Problem is t...
by Hefeweizen
Thu Apr 05, 2018 11:04 am
Forum: Tech Forum
Topic: AFM Interchange
Replies: 3
Views: 2679

AFM Interchange

Would anyone here know if AFM Bosch #0 280 203 002 and AFM Bosch # 0 280 203 011 are interchangeable?
by Hefeweizen
Tue Jan 23, 2018 12:04 pm
Forum: Tech Forum
Topic: Timing
Replies: 3
Views: 2633

Thanks! That really seems like a PITA and I have not tried this yet. Has to get warmer first. Guess it also depends on the size of the timing gun?