Search found 68 matches

by garyinwestoz
Fri Feb 07, 2020 10:56 pm
Forum: Tech Forum
Topic: bmw fans Aussie delivered extra diagrams
Replies: 2
Views: 236

bmw fans Aussie delivered extra diagrams

FYi - I found these extra parts diagrams for Aussie delivered e12 = seem to be dated Sept 78 onwards, which I guess corresponds to new emision compliance requirements.

http://bmwfans.info/parts-catalog/E12/E ... on?s=L810A
by garyinwestoz
Fri Feb 07, 2020 10:50 pm
Forum: Tech Forum
Topic: gunked up thermostat cover
Replies: 0
Views: 639

gunked up thermostat cover

I wish now I took a photo of my thermostate cover yesterday FYI my 76 525 manual but after some time in figuring things and out and playing with it ( like for 3 years) , I managed to rewire the engine system so the LPG is now disabled and the petrol system runs, such that I got the car started - aft...
by garyinwestoz
Tue Apr 23, 2019 1:39 am
Forum: Tech Forum
Topic: zf 3hp 22 transmission oil change.
Replies: 8
Views: 848

Re: zf 3hp 22 transmission oil change.

thanks for the tip about the valve body gaskets

any idea on where to get transmissions parts from?

I found this today - a manual on the hp22
posted on Ozzie frogs forum

by garyinwestoz
Wed Feb 06, 2019 5:45 am
Forum: Tech Forum
Topic: L jet info - running rich
Replies: 1
Views: 386

L jet info - running rich

found this today http://www.injectronics.com.au/assets/Uploads/T0067.pdf " Document number: T0067 TECHNICAL BULLETIN For further technical information regarding testing, repairs or to search for New or Remanufactured Automotive electronic products, please visit www.injectronics.com.au, call our offi...
by garyinwestoz
Tue Jan 29, 2019 5:16 am
Forum: Tech Forum
Topic: zf 3hp 22 transmission oil change.
Replies: 8
Views: 848

Re: zf 3hp 22 transmission oil change.

Hi Gary - your images didn't make it. I think you need to host them off-site. If you don't have an account already, imgbb works great with FF's front-end. https://imgbb.com/ Cheers, and we northern hemisphere dwellers are little envious of your summertime activities! thanks for the suggestion - hav...
by garyinwestoz
Tue Jan 29, 2019 4:56 am
Forum: Tech Forum
Topic: zf 3hp 22 transmission oil change.
Replies: 8
Views: 848

Re: zf 3hp 22 transmission oil change.

I was wondering about the remaining 3 litres - thats in the torque converter - how is that flushed out/replaced -
by garyinwestoz
Mon Jan 28, 2019 12:42 am
Forum: Tech Forum
Topic: zf 3hp 22 transmission oil change.
Replies: 8
Views: 848

zf 3hp 22 transmission oil change.

Hi ya the auto transmission is this 80 528i was not engaging reverse very well - very laggy - forward gears seemed fine, so I decided to do filter and fluid replacement - hoping to avoid a transmission swap. Haynes manual says requires 2.0 litre Dexron II I purchased ; Penrite ATF FS full synthetic ...
by garyinwestoz
Wed Nov 07, 2018 8:33 pm
Forum: Tech Forum
Topic: starts - won't run unless key held
Replies: 8
Views: 958

Re: starts - won't run unless key held

Well, I've tried to put this switch back together - not working to well- either I've got it wrong or the parts are too warn to get electrical contact getting dash lights, but no power to starter I did get to work out how to by pass at the plug - connect blacktop green - for continuous power and then...
by garyinwestoz
Mon Oct 29, 2018 11:35 pm
Forum: Tech Forum
Topic: starts - won't run unless key held
Replies: 8
Views: 958

Re: starts - won't run unless key held

yep Mike thats the cable - although I have the metal housing. parts I have now are 4 small springs, 2 brass/copper plates I got it back together and held it tight, reconnected and car started - so its this switch. https://previews.dropbox.com/p/thumb/AAPxql2uesW0wCASP6lzG9YARpMuKyFXZV0qF1LFHSQnAVFoY...
by garyinwestoz
Fri Oct 26, 2018 11:23 pm
Forum: Tech Forum
Topic: starts - won't run unless key held
Replies: 8
Views: 958

Re: starts - won't run unless key held

call it bad luck or stupid dunno I asked my wife to help me get the lead out ( smaller mor gentle hands), well bugger me it broke! Here are the parts removed - any idea how it goes back togather - is there a drawing anywhere? thanks in advance Gary https://lh3.googleusercontent.com/qKTpC39gywbfkyclq...
by garyinwestoz
Fri Oct 26, 2018 10:09 pm
Forum: Tech Forum
Topic: starts - won't run unless key held
Replies: 8
Views: 958

Re: starts - won't run unless key held

10 minutes later removed dash below steering column, removed steering column cover - oh dear back of ignition barrel is loose. hold firm , turn key, starts - and stays running when take hand off key! LOL hope thats all it was hmm seem to have a intermittent backfire - best relook at tappets! chow Gary
by garyinwestoz
Fri Oct 26, 2018 10:00 pm
Forum: Tech Forum
Topic: starts - won't run unless key held
Replies: 8
Views: 958

starts - won't run unless key held

This 80' 528i I have has been running fine, test driving up and down the street ( not yet registered) I recently reset the valve clearances. then the other day I go to move it and - starts + runs 2- 3 sec ( cold start injector working) but then cuts off. If key is held on stays running. I've ; chang...
by garyinwestoz
Sat Jul 07, 2018 9:00 pm
Forum: Tech Forum
Topic: " Ended" sources for finding parts NLA.
Replies: 7
Views: 985

Re: " Ended" sources for finding parts NLA.

maybe a FAQ list could be written up of these NLA parts. I have a spare parts car - so I'm not up with NLA parts - except the central resonator - evidently thats NLA here ( Western Australia) my guess of NLA parts: exterior bodywork front and rear euro chrome bumpers chrome weather trim strip ( runs...
by garyinwestoz
Mon Jul 02, 2018 8:01 pm
Forum: Tech Forum
Topic: brake master cylinder rebuild
Replies: 3
Views: 393

Re: brake master cylinder rebuild

I think you're right and that would make sense. Since it's a dual circuit M/C you want something separating the two hydraulically. That seal would do that. Your pics didn't come thru, except for the BMW fans one, they just take me to a Google longin screen. okidoki will give that a shot. note: It s...
by garyinwestoz
Mon Jul 02, 2018 7:53 am
Forum: Tech Forum
Topic: brake master cylinder rebuild
Replies: 3
Views: 393

brake master cylinder rebuild

Im rebuilding my brake master cylinder have all the new rubber seals. there are 4 of 1 kind and 1 of another ( similar different lip) I didn't take notice of what seal went where when I took them off (- over 6 weeks ago) can anyone tell me where this different seal goes? my guess is the back end of...