Firstfives.org

UPHOLSTERY SANDBEIGE 0036 is on my 1980 528i and apparently is no longer available as replacement covers. I am looking for a source for factory replacement covers or for the factory fabric to replace panels. Any help is appreciated, thanks Don

My AC compressor is leaking and I need a replacement, new preferably, and I am not able to locate a new compressor. Anyone know where I can locate one? thanks for the feedback.

Clean ground connections for injectors. I had corrosion at connectors inside insulation where crimped. there should be two connections for set of three wires. This caused irregular no-start problems at most inopportune times.

Has anyone used a Sanden AC conversion kit (R12 to R134) on a 1980 e12? Is a kit available?

I'll replace the switch and let you know the results,,,Thanks for the input

When coming to a stop the engine does not go to a normal idle of 950 rpm, but goes to 300-400 stumbles and almost shuts-off. This started after head gasket replacement and head rebuild. I set the timing, and adjusted the throttle body per the FAQ and checked the idle and WOT switches per the FAQ ...

On my 80 L jet the cold start injector high on the manifold is a light blue color. This is probably the connection with the long length.

Update, Problem solved. I rechecked the Cam timing and it was off, once I reset the Cam it runs well.

I replaced a blown headgasket and had the head inspected and needed valve job. They replace 5 exhaust guides and ground valves also surfaced head .008. After reassembly started engine and it is making loud noises in valve train area, like really loose rocker adjustment. I have adjusted valves (.010 ...