Search found 6 matches
- Mon Aug 10, 2020 12:46 pm
- Forum: Tech Forum
- Topic: Strange Stall/ No Start - Overheated coil?
- Replies: 22
- Views: 14685
Re: Strange Stall/ No Start - Overheated coil?
Tom, if you are running an Ljet distributor, inside of it is a part called a "pulse generator. That is what the ECU gets it's fueling feedback from. They are known to go bad. I think you have to throw that in the mix. Yes, coils go bad otherwise why would there be such a vast amount of new coil...
- Tue Dec 11, 2018 5:52 pm
- Forum: Tech Forum
- Topic: Sport Shock Options
- Replies: 19
- Views: 11165
Re: Sport Shock Options
My understanding from numerous posts on E24 forums is that the HDs and sports have the same valving. The difference is in the length of the stroke. So back to rebuild. If the money is there to spend, I believe Bil can rebuild B6s as B8s with the large part of the cost being in the new shafts. If I a...
- Sun Dec 09, 2018 6:08 pm
- Forum: Tech Forum
- Topic: Sport Shock Options
- Replies: 19
- Views: 11165
Re: Sport Shock Options
That answer is way off base. The B6's will work in the front where the spring is "captive on the strut. But the rear is a different breed of cat. The difference between a B6 and B8 shock is the length of the stroke of the shock shaft. The problem with the B6 is the stroke is longer and allows t...
- Sun Sep 10, 2017 5:19 pm
- Forum: Tech Forum
- Topic: Large tube single row radiatirs
- Replies: 5
- Views: 2997
Robert, I am in Phoenix and have spoken with the Ron Davis people. I have also been in contact with several fellows here who are running his large tube radiator. All comments were very favorable.Ron Davis as well as more than several other companies insist there is more cooling surface with the larg...
- Sat Sep 09, 2017 5:49 pm
- Forum: Tech Forum
- Topic: Large tube single row radiatirs
- Replies: 5
- Views: 2997
- Sat Sep 09, 2017 2:35 pm
- Forum: Tech Forum
- Topic: Large tube single row radiatirs
- Replies: 5
- Views: 2997
Large tube single row radiatirs
I am contemplating using a large tube single row radiator. Anyone done this? If so, what company or brand did you use?? feedback appreciated