With a claimed 40mm drop from stock ride height, the SPAX springs might be fairly aggressive, but the lack of aftermarket springs for the e12 leaves few options.
These SPAX springs, if you get in on the deal, can be had in December.
Suspension Techniques are, at this time, not being made nor ...
Search found 49 matches
- Mon Nov 16, 2009 8:24 pm
- Forum: Tech Forum
- Topic: SPAX springs group buy, but must act quickly
- Replies: 0
- Views: 4604
- Sun Nov 08, 2009 9:49 am
- Forum: Tech Forum
- Topic: Problem with changing out the engine fan
- Replies: 5
- Views: 8696
- Sat Nov 07, 2009 7:03 pm
- Forum: Tech Forum
- Topic: Intake manifold to change or not to change
- Replies: 6
- Views: 8792
- Mon Nov 02, 2009 8:35 pm
- Forum: Tech Forum
- Topic: how best to install water pump and T-stat
- Replies: 8
- Views: 9996
- Sun Nov 01, 2009 9:48 pm
- Forum: Tech Forum
- Topic: Replacing my stereo
- Replies: 7
- Views: 8178
- Sun Nov 01, 2009 9:41 pm
- Forum: Tech Forum
- Topic: how best to install water pump and T-stat
- Replies: 8
- Views: 9996
Re: how best to install water pump and T-stat
I had someone build up a motor from a '71 Bavaria block and '81 528i head.
The new water pump is leaking, he didn't use a gasket when he assembled it.
My question: putting this back together should I use a gasket and some liquid gasket just liquid gasket or just paper gasket?
I also hope that ...
The new water pump is leaking, he didn't use a gasket when he assembled it.
My question: putting this back together should I use a gasket and some liquid gasket just liquid gasket or just paper gasket?
I also hope that ...
- Fri Oct 23, 2009 9:49 pm
- Forum: Tech Forum
- Topic: O2 sensor change
- Replies: 9
- Views: 11488
Yes they come out with an open end 21 or 22mm, I never remember.....and an equalizer. I use a piece of aluminum pipe about 15" long that is large enough to slip over the wrench for added torque. The real catch is having to lift the right side enough to have clearance to access fitting the wrench ...
- Thu Oct 22, 2009 10:35 pm
- Forum: Tech Forum
- Topic: O2 sensor change
- Replies: 9
- Views: 11488
I'd spend it
If you put it in with lots of anti-sieze, just barely tight enough, 100 miles ago, it might come out with an open end.
Recently on my 535i, I broke a made-for-the-job socket sourced locally (<$20), then the socket in the free loaner kit they offer (their suggestion), before finally bringing the car ...
Recently on my 535i, I broke a made-for-the-job socket sourced locally (<$20), then the socket in the free loaner kit they offer (their suggestion), before finally bringing the car ...
- Thu Oct 22, 2009 9:01 pm
- Forum: Tech Forum
- Topic: In tank fuel pump noise.
- Replies: 7
- Views: 8055
a crazy coincidence to check
This one bothers me, which says more about me than the bother.
I noticed my fuel pump occasionally sounding louder.
It was louder than the pump in my e28, so I figured that either the pump must be different, or my e12 pump was failing or strained.
The pumps seem to be the same stuff, no clues there ...
I noticed my fuel pump occasionally sounding louder.
It was louder than the pump in my e28, so I figured that either the pump must be different, or my e12 pump was failing or strained.
The pumps seem to be the same stuff, no clues there ...
- Tue Sep 08, 2009 7:38 pm
- Forum: Tech Forum
- Topic: Bilstein perch slots
- Replies: 3
- Views: 5459
- Fri Sep 04, 2009 6:00 pm
- Forum: Tech Forum
- Topic: Bilstein HD shocks
- Replies: 3
- Views: 4717
- Fri Aug 28, 2009 5:16 pm
- Forum: Tech Forum
- Topic: Fuel pressure before startup...
- Replies: 4
- Views: 7962
- Thu Aug 27, 2009 8:36 pm
- Forum: Tech Forum
- Topic: Fuel pressure before startup...
- Replies: 4
- Views: 7962
Fuel pressure before startup...
In my Volvo 145 with D-Jetronic fuel injection, when the key first reaches the on position during startup, the fuel pump is aumatically switched on for about 1 sec. to build fuel pressure. The result is starts as quick as you could expect. In my e12, I sometimes have to turn the key to start for a ...
- Tue Aug 25, 2009 4:47 pm
- Forum: Tech Forum
- Topic: Timing, idle switch, stuck throttle updates
- Replies: 2
- Views: 4373
Re: Timing, idle switch, stuck throttle updates
Turned out the throttle sticking was caused by my choice of where to locate the screw on the hose clamp for the AFM rubber tube to the air cleaner. Right side, screw facing up put it right where the throttle side plate could catch on it and hang up.
Oh man,
I wish that I could say that I didn ...
- Sat Aug 22, 2009 10:40 am
- Forum: Tech Forum
- Topic: Baffled Again with Driveability Problems
- Replies: 15
- Views: 28108
Re: Baffled Again with Driveability Problems
I never have made the 528i run correctly since the transmission and engine swap. So last nite I swapped out the distributor, re-timed the car and it ran great. I couldn't believe the difference. (snipped) If anyone has any other ideas...
Brad,
I'm not sure what this conclusion would mean, and ...
Brad,
I'm not sure what this conclusion would mean, and ...