Search found 17 matches
- Sat Aug 24, 2013 8:23 am
- Forum: Tech Forum
- Topic: Removing half shafts
- Replies: 6
- Views: 5465
- Sun Jun 28, 2009 2:56 pm
- Forum: Tech Forum
- Topic: Paging Peter Florence
- Replies: 5
- Views: 5830
If you get it send via old fashioned donkey-cart mail, the border fees are considerably cheaper, if they bother to charge you at all. Alternatively, see if somewhere like Pembina or Neche or one of those little just-over-the-border places has mailbox rentals or some other sort of drop. My father-in-...
- Fri Jun 12, 2009 8:36 pm
- Forum: Tech Forum
- Topic: Speedometer box plug in
- Replies: 13
- Views: 11450
- Wed Jun 10, 2009 3:03 pm
- Forum: Tech Forum
- Topic: clutch master cylinder replacement
- Replies: 6
- Views: 6904
While I can appreciate your thriftiness, my suggestion is to not re-use the line. Apart from the booged nut, rubber hoses have a tendency to degrade over time and ultimately fail. A failed rubber clutch line is what had me driving home in rush-hour traffic without a clutch. Sure as shit, if you chan...
- Sat Mar 28, 2009 10:56 pm
- Forum: Tech Forum
- Topic: AFM Slamming Shut
- Replies: 6
- Views: 6918
The AFM sends a signal voltage to the ECU based on the position of the door. If the voltage is incorrect, the ECU won't adjust fuel to match throttle position (we only have idle and WOT throttle switches). This is a possible area of concern. Even if the AFM is giving the correct signal, the harness ...
- Wed Mar 04, 2009 10:15 pm
- Forum: Tech Forum
- Topic: Battery Light On - Now Now Also Difficutly Starting
- Replies: 5
- Views: 5662
- Sun Feb 22, 2009 4:50 pm
- Forum: Tech Forum
- Topic: Cold no-start
- Replies: 6
- Views: 8467
I'm fairly certain it was flooded. I'd let it sit for a couple of hours and it still wouldn't fire up but the next morning it lit off instantly. It needs a general tuning one of these days anyway and I suspect it's state of tune combined with the weather and my finicky ignition key conspired to leav...
- Wed Feb 18, 2009 11:24 am
- Forum: Tech Forum
- Topic: Cold no-start
- Replies: 6
- Views: 8467
- Tue Feb 17, 2009 10:49 am
- Forum: Tech Forum
- Topic: Cold no-start
- Replies: 6
- Views: 8467
Cold no-start
Running behind this morning thanks to my car that won't start, so not a lot of trouble-shooting thus far. Engine cold, cranks fine, fuel pump running and fuel being pumped through the system but not yet sure if the injectors are firing. Gives a half-hearted almost-start when first cranked, but gives...
- Sun Feb 08, 2009 9:59 pm
- Forum: Tech Forum
- Topic: Recaros
- Replies: 6
- Views: 7571
Yep, at least taking seats from an '87 or '88 E28 and dropping them into an '80 or '81 E12 is a straight, bolt-in affair. The only thing you have to do is take the E12 seatbelt and put it on the E28 seat.swatterssr wrote: Excuse the thread hijack...
So Mike W.,
How about swapping E28 seats into and E12?
- Thu Jan 29, 2009 9:59 pm
- Forum: Tech Forum
- Topic: Needed: dyno graph of a 2.8L engine
- Replies: 4
- Views: 5370
- Sat Jan 17, 2009 12:53 pm
- Forum: Tech FAQs - Other (Body, interior, electrical, etc...)
- Topic: Original Tech FAQ List
- Replies: 0
- Views: 15101
Original Tech FAQ List
If you would like to volunteer to write an FAQ article or have any questions, please contact Peter Florance . 2.8L to 3.5L Engine Conversion - by Sean Steinman and Peter Claassen A/C Evacuate and Recharge FAQ - By Dave Spencer A/C melting fuse box - This should be helpful for you Florida, Texas, and...
- Sat Jan 17, 2009 12:51 pm
- Forum: Tech FAQs - Suspension and wheels/tires
- Topic: Original Tech FAQ List
- Replies: 0
- Views: 14383
Original Tech FAQ List
If you would like to volunteer to write an FAQ article or have any questions, please contact Peter Florance . 2.8L to 3.5L Engine Conversion - by Sean Steinman and Peter Claassen A/C Evacuate and Recharge FAQ - By Dave Spencer A/C melting fuse box - This should be helpful for you Florida, Texas, and...
- Sat Jan 17, 2009 11:56 am
- Forum: Tech FAQ's - Engine and Driveline
- Topic: Original Tech FAQ List
- Replies: 0
- Views: 16084
Original Tech FAQ List
If you would like to volunteer to write an FAQ article or have any questions, please contact Peter Florance . 2.8L to 3.5L Engine Conversion - by Sean Steinman and Peter Claassen A/C Evacuate and Recharge FAQ - By Dave Spencer A/C melting fuse box - This should be helpful for you Florida, Texas, and...
- Tue Jan 06, 2009 5:43 pm
- Forum: Tech Forum
- Topic: Injector questions
- Replies: 6
- Views: 7996