Search found 1649 matches

by Mike W.
Thu Jul 18, 2019 12:52 am
Forum: Tech Forum
Topic: Differential or pinion and ring gear
Replies: 8
Views: 239

Re: Differential or pinion and ring gear

No spare diff's here. Never been into one but I've heard it's usually the bearings, not the R and P that's the problem, so I'd consider new bearings instead of the typical 300K replacement. Again, I've heard, not done, but I've heard it's possible to mark the nut and shaft, then tighten just to that...
by Mike W.
Tue Jul 16, 2019 11:53 pm
Forum: Tech Forum
Topic: cylinder head swap
Replies: 23
Views: 497

Re: cylinder head swap

Measured my pianos: 6mm tall. Looks like I lucked into higher compression. Sweet! EA38B08F-2F27-426F-BB39-5574EA738F7A.jpeg OH wow, thats awesome, Mike whats the HP difference in those engines? Not a ton, euro 528i was 177HP, US 169HP. Still a little more fun. On valve guides, in my experience the ...
by Mike W.
Tue Jul 16, 2019 11:49 pm
Forum: Tech Forum
Topic: Exhaust: 633CSi v 528i
Replies: 4
Views: 174

Re: Exhaust: 633CSi v 528i

79-81 528i and 80-81 633CSi used identical exhausts. Especially if you have a 2.8 I don't think the 2 unconnected manifolds as used on earlier and later M30s are going to get you anything performance wise. IMO the only downside to the one manifold bolted to the other manifold with a single downpipe ...
by Mike W.
Mon Jul 15, 2019 11:17 am
Forum: Tech Forum
Topic: cylinder head swap
Replies: 23
Views: 497

Re: cylinder head swap

US spec E12 2.8's had a small raised piano top crown, 2MM IIRC. Early US 2.8s, such as 69-71 E3s and E12 euro had higher compression, 9:1 pistons with a larger crown, ~6MM or so. The pic looks like more than 2MM but I can't tell for sure.
by Mike W.
Sun Jul 14, 2019 1:18 pm
Forum: Tech Forum
Topic: Bolt length for BBS RA?
Replies: 2
Views: 111

Re: Bolt length for BBS RA?

I don't know what size is needed, but you want a minimum of 6 threads engaged. Too long isn't a problem in front but will be in back if it hits the e brake parts.

Ebay is another source but even more likely to be questionable quality.
by Mike W.
Sun Jul 14, 2019 1:15 pm
Forum: Tech Forum
Topic: cylinder head swap
Replies: 23
Views: 497

Re: cylinder head swap

Not to worry, just bolt it on up.

You do have the right cam in there or adapter nut, correct?
by Mike W.
Mon Jul 08, 2019 12:06 am
Forum: Tech Forum
Topic: Euro bumper rubber trim to bumper "fasteners"?
Replies: 6
Views: 236

Re: Euro bumper rubber trim to bumper "fasteners"?

They're 6MM screws right? Got a grinder and a bucket of water? Have at it, I've done worse. :D Or weld/braze/silver solder a flange on a stud. Even if you do have a 100 point car and are showing it, nobody's going to look underneath to verify the head of the fastener.
by Mike W.
Mon Jul 08, 2019 12:02 am
Forum: Tech Forum
Topic: No click or fuel pump hum when AFM flap is opened?
Replies: 6
Views: 241

Re: No click or fuel pump hum when AFM flap is opened?

I also like to jump pins 36 and 39 on the AFM. That bypasses the AFM flap fuel cutoff and you can test fuel pump operation without starting car. Pump will run with ignition in "ON" position before cranking. Combo relay is certainly a common culprit for your problem, as discussed. No, there is no pr...
by Mike W.
Sun Jul 07, 2019 11:50 pm
Forum: Tech Forum
Topic: Swapping combo relay from a 76 530i to a 77 530i ?
Replies: 5
Views: 216

Re: Swapping combo relay from a 76 530i to a 77 530i ?

I thought all 530s were the same. 528s I know are different. But what does Realoem say? It's not perfect, but it's an invaluable resource that's usually right.

Also as Robert said, check pinout by number and location.
by Mike W.
Sun Jun 30, 2019 11:37 pm
Forum: Tech Forum
Topic: Hooking up Battery wrong.
Replies: 5
Views: 359

Re: Hooking up Battery wrong.

canada karl wrote:
Sat Jun 29, 2019 7:48 am
Good idea Mike. I'm going to keep a record of maintenance. Do you just have the one E12 now?
Yes I do, I sold the '80 a couple of months ago. Nice kid bought it, I need to do a post on the sale.
by Mike W.
Sun Jun 30, 2019 11:35 pm
Forum: Tech Forum
Topic: Where's the best place to buy.....
Replies: 2
Views: 191

Re: Where's the best place to buy.....

I'm not a fan of Max, but regardless... Without checking prices on those parts, Autohausaz is my favored vendor, good prices with a variety of suppliers, although the semi recent website change is much for the worse, Amazon often has good prices on things, but you have to be very careful about the m...
by Mike W.
Fri Jun 28, 2019 9:58 am
Forum: Tech Forum
Topic: Hooking up Battery wrong.
Replies: 5
Views: 359

Re: Hooking up Battery wrong.

canada karl wrote:
Thu Jun 27, 2019 8:43 pm
My problem is I have 5 older cars and must have missed the BMW at tune up time.
I don't have a collection like that anymore, but it's why Iog everything in a spreadsheet for the car. I still forget, but at least I've got a record of when things were done.
by Mike W.
Wed Jun 19, 2019 3:06 pm
Forum: Tech Forum
Topic: E12 Crank Position sensor
Replies: 9
Views: 498

Re: E12 Crank Position sensor

Thanks for hint about bleeding screw. Changing the coolant last time I scaresly moved this screw and fortunatelly it never failed. You mean to machine new thread M8 in housing? Have You a photo of new screw? I've bought this beatifull red cap at BMW. Small thing, 2 bucks and so much fun. https://c1...
by Mike W.
Tue Jun 18, 2019 11:51 am
Forum: Tech Forum
Topic: 77, 78 side mirror glass
Replies: 7
Views: 336

Re: 77, 78 side mirror glass

Hi Mike - curious, how were the 80/81 doors revised? That corner where the mirror mounts is different. The sheet metal has a different shape to it and the holes are in a different location. I put the later mirrors on a 79 I had long ago and it was not a bolt up. Seems like I had to trim the rubber ...
by Mike W.
Mon Jun 17, 2019 11:58 pm
Forum: Tech Forum
Topic: 77, 78 side mirror glass
Replies: 7
Views: 336

Re: 77, 78 side mirror glass

The chrome, corner of the window mirror ran thru the 79 model year. 80/81 got the black plastic mirror along with slightly revised doors. The assemblies will not fit, E24s have more of an angle to them and E23s are larger. The mirror head might fit, but is a royal pain to try to remove from the base...