Search found 1885 matches
- Wed Mar 22, 2023 11:05 pm
- Forum: Tech Forum
- Topic: Thermo time switch
- Replies: 1
- Views: 2747
Re: Thermo time switch
The TTS allows the cold start valve to turn on a maximum of 8 seconds I believe it is, while cranking, and only while cranking. It's supposed to make starting in cold weather easier. I've experimented and found no difference I could tell down into the 30's, F, but in very cold temps it might make a ...
- Wed Mar 22, 2023 6:57 pm
- Forum: Tech Forum
- Topic: Combo Relays?
- Replies: 7
- Views: 2424
Re: Combo Relays?
I've been dealing with a combo relay issue that was just recently resolved. I ended up separating the case on mine and tried to start the car while looking at the internals to verify they were working. Not very scientific, but it's an option. The problem with that is if it's a bad contact, as appar...
- Wed Mar 22, 2023 12:26 pm
- Forum: Tech Forum
- Topic: Combo Relays?
- Replies: 7
- Views: 2424
Re: Combo Relays?
I'm sure there's a way to make 2 or more separate relays do the job, but I think they do interact with each other. It's hard to say for sure as most diagrams just show them as a box with leads, and one, very fuzzy one I've got on the computer that does show what's inside is hard to read and missing ...
- Tue Mar 21, 2023 4:59 pm
- Forum: Tech Forum
- Topic: Combo Relays?
- Replies: 7
- Views: 2424
Re: Combo Relays?
Testing would be difficult as I've heard they often fail intermittently. So it might test good today, but not tomorrow.
Availability? Dunno, query Realoem for a P/N and search for it. At worst I would think they would pop up on ebay every so often.
Availability? Dunno, query Realoem for a P/N and search for it. At worst I would think they would pop up on ebay every so often.
- Sat Mar 18, 2023 12:59 am
- Forum: Tech Forum
- Topic: No start procedure?
- Replies: 2
- Views: 921
Re: No start procedure?
To clear a flooded L jet engine, unplug the ECU. As long as the ignition still works, it'll fire up, burn off the fuel present and in the process warm up the plugs and engine just a little bit making starting easier.
- Tue Mar 07, 2023 1:39 pm
- Forum: Tech Forum
- Topic: Blade fuse upgrade
- Replies: 5
- Views: 2514
Re: Blade fuse upgrade
Oh, the plastic fuses are absolute junk, especially in 16 and 25A applications. Last I knew ceramic were still available, you just had to look for them. The glass fuses aren't really much better, they don't blow, but the solder in them that holds the fuse link to the end melts with heat. Again, in h...
- Sat Mar 04, 2023 8:04 pm
- Forum: Tech Forum
- Topic: Blade fuse upgrade
- Replies: 5
- Views: 2514
Re: Blade fuse upgrade
Nice work, looks good! A FWIW, on Mye28.com there's a lengthy thread about the conversion and some of the fallout. One of the upshots is that the new ATO blade fuses are much more accurate, precise and less forgiving of an overload. Seems the old GMB "bullet" fuses will blow sometime, even...
- Sun Feb 26, 2023 9:47 pm
- Forum: Tech Forum
- Topic: 520/6 + G265/5 gearbox + G265/6 driveshaft ?
- Replies: 4
- Views: 1041
Re: 520/6 + G265/5 gearbox + G265/6 driveshaft ?
You weren't kidding, it's complicated. Though it reminds me of some of the mix and match I've done over the years. Now I do have some info that would be hard to come by, but mostly I'm just going off Realoem in terms of 265/5 and 265/6 fitment. The M20 wild card I don't think is an issue as while th...
- Tue Feb 07, 2023 8:15 pm
- Forum: Tech Forum
- Topic: Windshield Replacement
- Replies: 2
- Views: 901
Re: Windshield Replacement
One more thing, don't even think about using silicone caulk/sealer. Often it works well at first, but then the seal breaks, it looks good, but leaks.
- Tue Feb 07, 2023 4:32 pm
- Forum: Tech Forum
- Topic: Windshield Replacement
- Replies: 2
- Views: 901
Re: Windshield Replacement
Not sure what your question is, but I'll weigh in with some of the usual issues. Last I knew the glass was NLA from BMW. Replacements generally don't fit well. Many places now don't even want to do a gasketed windshield, they only want to do glue ins. Which is a shame, it's not difficult. E28s used ...
- Tue Feb 07, 2023 1:11 pm
- Forum: Tech Forum
- Topic: 76 530i motor&5spd into a 74 Bavaria?
- Replies: 15
- Views: 2329
Re: 76 530i motor&5spd into a 74 Bavaria?
The more I think about it the worse the idea of a spacer or the like sounds to me. You really need to get under the Bav and measure things. You have some fudge room, to lengthen the shaft a bit, but not a whole lot, so it doesn't have to be perfect. Looking at some records I've gotten from Realoem, ...
- Sat Feb 04, 2023 4:29 pm
- Forum: Tech Forum
- Topic: 76 530i motor&5spd into a 74 Bavaria?
- Replies: 15
- Views: 2329
Re: 76 530i motor&5spd into a 74 Bavaria?
I think installing the FI wiring might be a challenge for me. When I did it in the early 90s there was very little documentation out there, pre internet. Now it should be no big deal. Hardest part wiring wise was wiring up the fuel pump in back and running the wires to it. One problem with a D/S sp...
- Sat Feb 04, 2023 12:44 pm
- Forum: Tech Forum
- Topic: 76 530i motor&5spd into a 74 Bavaria?
- Replies: 15
- Views: 2329
Re: 76 530i motor&5spd into a 74 Bavaria?
Zenith carbs.
- Sat Feb 04, 2023 12:30 am
- Forum: Tech Forum
- Topic: 76 530i motor&5spd into a 74 Bavaria?
- Replies: 15
- Views: 2329
Re: 76 530i motor&5spd into a 74 Bavaria?
Perhaps you could machine a spacer, my first thought would be aluminum, mostly for weight but also workability, but it might not be hard enough, I'm not enough of an engineer to really say. For reasons I know technically, but don't really understand, BMW driveshafts are very cranky about being short...
- Fri Feb 03, 2023 4:41 pm
- Forum: Tech Forum
- Topic: 76 530i motor&5spd into a 74 Bavaria?
- Replies: 15
- Views: 2329
Re: 76 530i motor&5spd into a 74 Bavaria?
Yes the carbs would bolt up fine, but there may or may not be provisions on the later head for a mechanical fuel pump. Installing an electric fuel pump would be easy enough, but as cranky as those carbs were I'd just convert the car to FI. The major stumbling block I see is the driveshaft, a Bav has...