A/C Compressor Upgrade

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

cory58
Posts: 155
Joined: Thu Aug 25, 2016 8:49 pm
Location: Charlotte, NC

A/C Compressor Upgrade

Post by cory58 »

I've been reading the Hack Mechanic's series in the weekly Roundel about adding A/C to an early E24 and it got me thinking that I should start planning ahead for my E12. One of my E30s needs a new compressor and the adapter brackets to use a Sanden compressor on the M20 are NLA.

In the Roundel series, Rob mentions 2 adapter options for the M30 - one was designed for E28s and is sold by a guy on mye28.com, and the other was designed for an E9 and sold by a guy named Layne Wylie (L.C. Wylie & Co on FB). They both start with a late-model M30 mounting bracket for a "wing cell" compressor, and then add custom adapter brackets to it.

Has anyone here updated their E12 A/C with a Sanden compressor and/or used either of those mounting solutions on an E12?

Thanks, Cory
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
User avatar
CabbageFumes
Posts: 337
Joined: Tue Oct 21, 2014 7:07 pm
Location: Funkytown

Post by CabbageFumes »

The bosses in the block where the a/c compressor bracket mounts are the same throughout the years on the m30; its the bracket itself that has changed. What this means is all you have to do to use a later style compressor is use the later brackets, meaning almost anything with an m30 after ‘82 or so is considered a later bracket, compared to the earlier ski-jump style bracket, as I like to call it. When the bushings in those wear out, you’re pretty much hosed anyway. Just look for an ‘80s e24/28 in the wrecking yards and grab all the a/c hardware. It’s a direct fit.
Fiver 12/73
Fiver 06/87
Sixteen-O-Two-er 11/69
i3 8/14
cory58
Posts: 155
Joined: Thu Aug 25, 2016 8:49 pm
Location: Charlotte, NC

Post by cory58 »

CabbageFumes wrote:The bosses in the block where the a/c compressor bracket mounts are the same throughout the years on the m30; its the bracket itself that has changed. What this means is all you have to do to use a later style compressor is use the later brackets, meaning almost anything with an m30 after ‘82 or so is considered a later bracket, compared to the earlier ski-jump style bracket, as I like to call it. When the bushings in those wear out, you’re pretty much hosed anyway. Just look for an ‘80s e24/28 in the wrecking yards and grab all the a/c hardware. It’s a direct fit.
Thank you! Very helpful, since it looks like I need the later bracket and hardware regardless of the update option I choose.

I'm wondering if anyone here has updated to a newer style compressor, like the Sanden, or if everyone is just using rebuilt versions of the compressors that came on the later M30 cars, which are less efficient with 134a, because they are R12 compressors that have been rebuilt with 134a seals.

Cory
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
User avatar
Mike W.
Posts: 2782
Joined: Wed Aug 30, 2006 12:12 am
Location: Sonoma County

Post by Mike W. »

I don't like the wing cell compressors in 84 and newer cars, they're rough, noisy and always seem to leak at the compressor seal. But with either compressor, they're not the limiting factor with 134a, the condenser is.
Mike W.



1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter
T.Hanson
Posts: 1696
Joined: Wed Jul 26, 2006 7:39 am

Post by T.Hanson »

For drill, I have never tried either of two a/c's in umpty years. Just assumed fooling around with the r12 recharge monkey business wasn't worth it.

What are the odds the compressors spinning around forever, otherwise neglected, might fire up and work, however one goes about the system re - charge ?
cory58
Posts: 155
Joined: Thu Aug 25, 2016 8:49 pm
Location: Charlotte, NC

Post by cory58 »

Mike W. wrote:I don't like the wing cell compressors in 84 and newer cars, they're rough, noisy and always seem to leak at the compressor seal. But with either compressor, they're not the limiting factor with 134a, the condenser is.
Agree on all counts, which is why I’d like to use a newer style compressor when the time comes, rather than a wing cell. In order to get good performance from 134a, condenser and expansion valve would also need to be updated.

My a/c is currently better than any other older BMW I’ve owned, so I was shocked to find out it’s been 134a converted. I think it has an older style Bosch compressor. Would be awesome if the condenser’s already been updated. Haven’t checked it yet.
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
User avatar
Robert Bondi
Posts: 338
Joined: Sun Jan 11, 2009 12:33 am
Location: Austin, TX

Post by Robert Bondi »

I updated my A/C in 2006 to R134a. Everything outside the firewall was replaced; nothing under the dash was touched. On the compressor, BMP at the time sold a compressor kit for M30 engines - it included a custom aluminum bracket and a Seltec compressor, IIRC. I installed an increased capacity Al condensor from Vintage Air and a new aux fan with roughly twice the volumetric flow rate of the original. System still going with performance at least as good as the original R12.
Robert
77 530i
77 Euro 528
T.Hanson
Posts: 1696
Joined: Wed Jul 26, 2006 7:39 am

Post by T.Hanson »

Again, just for someday maybe. What are the odds my two compressors will only need a charge of R134a and work fine ?
User avatar
CabbageFumes
Posts: 337
Joined: Tue Oct 21, 2014 7:07 pm
Location: Funkytown

Post by CabbageFumes »

T.Hanson wrote:Again, just for someday maybe. What are the odds my two compressors will only need a charge of R134a and work fine ?
Unless the system has had all the seals replaced with the 134 compatible ones, and especially if you have the ancient compression fittings with no seals, chances are you will spend the money every summer refilling your system/s. There's lots of original r12 systems that still blow cold, never being serviced.
Fiver 12/73
Fiver 06/87
Sixteen-O-Two-er 11/69
i3 8/14
T.Hanson
Posts: 1696
Joined: Wed Jul 26, 2006 7:39 am

Post by T.Hanson »

Thank you C.F., it's 20º outside, to probably need advice on something else that falls off before July.

Including my fanny freezing off.
cory58
Posts: 155
Joined: Thu Aug 25, 2016 8:49 pm
Location: Charlotte, NC

Post by cory58 »

Robert Bondi wrote:I updated my A/C in 2006 to R134a. Everything outside the firewall was replaced; nothing under the dash was touched. On the compressor, BMP at the time sold a compressor kit for M30 engines - it included a custom aluminum bracket and a Seltec compressor, IIRC. I installed an increased capacity Al condensor from Vintage Air and a new aux fan with roughly twice the volumetric flow rate of the original. System still going with performance at least as good as the original R12.
Thank you Robert! Low probability that BMP would still have a kit, but worth a call.

Cory
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
tlake
Posts: 474
Joined: Wed Feb 03, 2010 6:33 pm
Location: WA

Re: A/C Compressor Upgrade

Post by tlake »

I bought a Sanden SD508 from Mesa Performance back in 2000, it came as part of a kit with an adaptor plate to mount the compressor. I also added a Vintage Air parallel flow condenser, so it has worked on R134a for many years.
User avatar
Mike W.
Posts: 2782
Joined: Wed Aug 30, 2006 12:12 am
Location: Sonoma County

Re:

Post by Mike W. »

T.Hanson wrote: Sat Nov 18, 2017 9:59 pm Again, just for someday maybe. What are the odds my two compressors will only need a charge of R134a and work fine ?
Odds are very good that the compressors are still ok as long as the system was sealed up. However if you have any of the red hoses, especially on the high side, they are probably very porous and the system won't hold a charge, especially with 134a. Plus 134a gives poor performance as a drop in. I would replace any of the red hoses, you can do it yourself inexpensively, I did a FAQ on it many years ago, then charge it with something like ES12 or the office duster stuff which has been getting rave reviews in the E28 world and elsewhere. I believe it's 152a.

You could of course have a leak elsewhere besides the red hoses, but I've had nothing but trouble with them on assorted BMWs.
Mike W.



1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter
User avatar
Lock
Posts: 456
Joined: Sun Oct 04, 2015 1:51 pm
Location: Olympia, WA
Contact:

Re: A/C Compressor Upgrade

Post by Lock »

On a similar note, my system is still on R12 and has a slight leak at the reciever-dryer connection and needs a charge (about half filled right now). I'm going to fix the leak, and then was going to switch it over to R134a with a new generic parallel flow condenser from ebay - but then I found now that since no one wants R12, it's dropped in price a lot down to about $30 a can vs $10 for R134a, so once the leak is fixed just going to charge it with R12. For the cost, why replace the condensor, hoses and expansion valve vs charging/recharging with original gas.
Seems we've come full circle and keeping an original non-leaking system with R12 is once again feasable.
1979 528i - M30B34 with 9.5:1 B35 pistons, 5-speed conversion G260/6, e28 rear subframe, e34 LSD 3.9:1, glass sunroof, e30 elec speedo, cruise control
tlake
Posts: 474
Joined: Wed Feb 03, 2010 6:33 pm
Location: WA

Re: A/C Compressor Upgrade

Post by tlake »

Lock wrote: Sat Apr 21, 2018 2:05 pm On a similar note, my system is still on R12 and has a slight leak at the reciever-dryer connection and needs a charge (about half filled right now). I'm going to fix the leak, and then was going to switch it over to R134a with a new generic parallel flow condenser from ebay - but then I found now that since no one wants R12, it's dropped in price a lot down to about $30 a can vs $10 for R134a, so once the leak is fixed just going to charge it with R12. For the cost, why replace the condensor, hoses and expansion valve vs charging/recharging with original gas.
Seems we've come full circle and keeping an original non-leaking system with R12 is once again feasable.
True, if you have access to affordable R12 then stay all original. So long as all the system parts are clean and there are no leaks and all is working as it should, then the e12 a/c is ok, and much better than driving a car with no a/c when it's hot.
Post Reply