Vapor Blasting

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Vapor Blasting

Post by 528i-1981 »

Gents: Brought a replacement valve cover (hat tip PatinaBeforePolish) and six 320is valve runners to New England Blastworx in Hinsdale NH for vapor blasting.

Image
Image
Image

10 micron glass beads and water at high pressure. The result is a creamy smooth surface with the pores in the metal peened closed so that they can be wiped clean. Still waiting for the frame welding to be done before I can mount these ...
(oo=00=oo) Eric
1981 528i Manual
User avatar
maybeillbuyit
Posts: 333
Joined: Mon Feb 17, 2014 12:26 am
Location: Vancouver BC

Re: Vapor Blasting

Post by maybeillbuyit »

Looks amazing Eric. I am looking for two more 320i intakes to have enough to do that modification as well. What did the glass beading cost?
1977 530i another project
1979 635csi Euro "project"
1987 635csi
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Vapor Blasting

Post by 528i-1981 »

All six tubes plus the VC for $150.

Yes, I can't find any flaws except one small stain where oil had leaked through one of the intake runners from the inside. These parts look better than new. Turnaround was under a week.
(oo=00=oo) Eric
1981 528i Manual
User avatar
Lock
Posts: 456
Joined: Sun Oct 04, 2015 1:51 pm
Location: Olympia, WA
Contact:

Re: Vapor Blasting

Post by Lock »

Agreed that looks great, I was thinking about painting some of my old parts but getting them as clean as that is a better result.
1979 528i - M30B34 with 9.5:1 B35 pistons, 5-speed conversion G260/6, e28 rear subframe, e34 LSD 3.9:1, glass sunroof, e30 elec speedo, cruise control
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Vapor Blasting

Post by 528i-1981 »

Here are the E21 runners mounted.

Image

The fuel rail was painted with Master Series urethane-based coating. The color is a close match to the vapor-blasted aluminum. There is a black topcoat available as well, which I've moved to from POR-15 everywhere on my E12.
(oo=00=oo) Eric
1981 528i Manual
User avatar
keehn
Posts: 199
Joined: Tue Oct 01, 2019 5:14 pm
Location: Clear Spring, MD

Re: Vapor Blasting

Post by keehn »

Eric,

All I can say is WOW!! :shock: That's a fantastic job the vapor blasting did to your parts.

Makes me a bit jealous, since all I'm doing is dry glass blasting. Mine may be clean in the end, but I doubt it will have your finish.

Mike
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Vapor Blasting

Post by 528i-1981 »

Thanks Mike, very kind words. Here's the accumulator and thermostat housing in place.

Image
(oo=00=oo) Eric
1981 528i Manual
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Vapor Blasting

Post by 528i-1981 »

And it's a wrap ...

Image

She started right up and drives well. Need to attend to a small coolant leak somewhere and adjust the idle. The E21 runners do make for a noticeable change in the torque curve and the engine notes may be somewhat different, but it's running now without the hood on so I cant's say for sure. The only other change was to the spin-on fan from the bolt-on. My car was built in 4/81 but had the old-style bolt-on fan - perhaps the factory was liquidating parts at the end of the production run? That alone is a huge upgrade.

Again thanks to Jon (patinabeforepolish) and Lach (lock) for selling me needed stuff over the past 12 months.
(oo=00=oo) Eric
1981 528i Manual
User avatar
keehn
Posts: 199
Joined: Tue Oct 01, 2019 5:14 pm
Location: Clear Spring, MD

Re: Vapor Blasting

Post by keehn »

Eric,

Fantastic job on your E12! It looks great :D

One tip: Verify that your vacuum advance actually WORKS. I decided to test mine (sucked on hose to create vacuum) and it did not. The new vacuum advance from Germany does move under "mouth" vacuum, proving to me that there was indeed, a problem with my original unit. When you suck on the vacuum inlet, the metal "arm" on the other side should move inwards as the diaphragm moves.

While timing does not call for vacuum advance, a broken vacuum advance WILL impact performance while driving.

Mike
User avatar
Lock
Posts: 456
Joined: Sun Oct 04, 2015 1:51 pm
Location: Olympia, WA
Contact:

Re: Vapor Blasting

Post by Lock »

That looks great Eric, the engine is now as shiny as your aluminum radiator.

And the spin-on fan is a worthwhile upgrade hey. No more draining and removing the radiator just to remove the fan to get access to the front.
1979 528i - M30B34 with 9.5:1 B35 pistons, 5-speed conversion G260/6, e28 rear subframe, e34 LSD 3.9:1, glass sunroof, e30 elec speedo, cruise control
Post Reply