Hello everyone, if I were to put injectors from a newer bmw on the E12, what would i have to do to adjust the fuel to air ratio? And would it actually work or not?
Thank you
Newer Fuel injectors
Re: Newer Fuel injectors
How newer are we talking about? What are you after? Are you running a turbo?
Or are you trying to save cost by re using what you have?
I replaced mine with a reman set of bosch injectors and an OEM fuel pressure regulator. Runs way better now.
Or are you trying to save cost by re using what you have?
I replaced mine with a reman set of bosch injectors and an OEM fuel pressure regulator. Runs way better now.
Re: Newer Fuel injectors
They are from a 1991 5 series. I just have them lying around and wanted to see if i can put them in. Definitely a cost saving approach lol. I also put in an adjustable fuel regulator cause my old one may not have been working properly
Re: Newer Fuel injectors
https://www.rockauto.com/en/moreinfo.ph ... 6&jsn=2930 - 535i E34
https://www.rockauto.com/en/moreinfo.ph ... 9&jsn=2974 - e12
I don't think those ones will fit.
https://www.rockauto.com/en/moreinfo.ph ... 9&jsn=2974 - e12
I don't think those ones will fit.
Re: Newer Fuel injectors
Adjusting the air/fuel mixture would require you to dig into the air flow meter and make adjustments. You will most definitely need a CO detector at the tailpipe to dial in proper lambda.
Here's some YouTube videos you should watch before tackling this:
https://www.youtube.com/watch?v=yQukm7lNux4
https://www.youtube.com/watch?v=hQYRep6K15k
https://www.youtube.com/watch?v=Z-QlPtsjh7g
Before messing around, make sure you take pictures and document in case you need to set it back to factory defaults.
Mike
Here's some YouTube videos you should watch before tackling this:
https://www.youtube.com/watch?v=yQukm7lNux4
https://www.youtube.com/watch?v=hQYRep6K15k
https://www.youtube.com/watch?v=Z-QlPtsjh7g
Before messing around, make sure you take pictures and document in case you need to set it back to factory defaults.
Mike
Re: Newer Fuel injectors
Electrically e34 injectors won't work, the impedance is different between the L-Jet and Motronic ECUs and they're not interchangeable.
Physically they can be made to fit the log manifold, I've done it. You need to change the pintle cap, and also find a solution to the fuel rail connection. I used barb adapters.
Physically they can be made to fit the log manifold, I've done it. You need to change the pintle cap, and also find a solution to the fuel rail connection. I used barb adapters.
1979 528i - M30B34 with 9.5:1 B35 pistons, 5-speed conversion G260/6, e28 rear subframe, e34 LSD 3.9:1, glass sunroof, e30 elec speedo, cruise control