I know the location of the bolt that uses the O ring ( Haynes photo ) but the parts drawing is confusing. For fun, what came off had a thicker steel washer where the O ring, red fiber washer should have been and one wave washer.
Am I correct with 12110002735 O ring, against duck plate, then wave washer, bolt. All other bolts use wave washers. Use gasket goo on plate side of gasket.
Thank you,
The duck: washers, etc.
Correct. I also use blue locktite to make sure nothing loosens up especially given how difficult it is to get back there with the engine in place.Am I correct with 12110002735 O ring, against duck plate, then wave washer, bolt. All other bolts use wave washers. Use gasket goo on plate side of gasket.
Mike W.
1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter
1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter