fan coincidence
Posted: Sun May 03, 2009 9:04 pm
I've made a small discovery that I need to flesh out with more fact finding, but the quick synopsis is this:
The aux. cooling fan for an e12 has the same diameter and mounting hole locations as the aux. cooling fan for a Volvo 740, but the Volvo fan is significantly lighter, has more blades, and blows enough air to cool the car at idle from 3/4 on the gauge back to normal temps (1/4 on my gauge with coolest thermostat) without the help of a mechanical fan.
When my old fan motor died, I happened to have the Volvo fan lying about, and wondered how much effort it would take to mount it onto the e12.... The effort was solely in drilling 2 new holes to mount the ballast resistor for 2-speed operation.
A handy coincidence in my case!
The aux. cooling fan for an e12 has the same diameter and mounting hole locations as the aux. cooling fan for a Volvo 740, but the Volvo fan is significantly lighter, has more blades, and blows enough air to cool the car at idle from 3/4 on the gauge back to normal temps (1/4 on my gauge with coolest thermostat) without the help of a mechanical fan.
When my old fan motor died, I happened to have the Volvo fan lying about, and wondered how much effort it would take to mount it onto the e12.... The effort was solely in drilling 2 new holes to mount the ballast resistor for 2-speed operation.
A handy coincidence in my case!