Need to know the socket or wrench size for the main front crank/pulley nut .... 36mm ?
thx
Crank /Pulley nut size ?
- alotawatts
- Posts: 438
- Joined: Wed Jan 07, 2009 3:52 am
- Location: Seattle WA
Crank /Pulley nut size ?
Three E12's and one R27
But you better have a really long wrench
36mm is the correct socket size but the torque on this sucker is huge, something around 300 lb ft. If you are building a really hi-po motor you should consider the Frank Fahey crank hub, expensive but worth it. I have seen front hubs crack and break on track/race cars that are driven at high rpm consistently. That being said, I have also seen stock motors go on track and run for thousands of laps without a problem. It probably has something to do with driver smoothness and just dumb luck.