Went to drive the car after fixing the most recent fuel leak (see "ANOTHER leaking injector" thread) and now it won't turn over. Battery is charged. I can hear the starter solenoid click but the starter doesn't move, so it seems like the starter has failed.
Thinking about changing the starter myself, even though I've read it's a PITA. Any tips for getting the top nut loose? Should I remove anything other than the #6 intake runner? Should I try to bend a wrench for the bolt head? Do I need to get a thin wall socket and/or modify a socket for the nut? Can I make it work with u-joint adapters or do I need wobble adapters? I've also read that half moon wrenches or the 17-19mm wrench from the trunk tool kit can be used to get the top nut loose. Anyone have experience with those?
Sorry for all the questions. Any advice would be greatly appreciated.
Thanks, Cory
now it's the starter....
now it's the starter....
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
-
- Posts: 66
- Joined: Fri Apr 17, 2009 11:40 am
Re: now it's the starter....
Its easy peas to get the starter out if you ask me.
Go check the tool box in the trunk, the bent wrench you are after is in there.
Its two nuts on the starter to get it out, that wrench will reach both. sure its tight, and you can only get maybe a 1/4 turn each time, but once the nuts are started off, should be able to do the rest with your fingers.
As for the starter being bad after just playing with injectors? I suspect something else has happened to make the starter not turn.
Go check the tool box in the trunk, the bent wrench you are after is in there.
Its two nuts on the starter to get it out, that wrench will reach both. sure its tight, and you can only get maybe a 1/4 turn each time, but once the nuts are started off, should be able to do the rest with your fingers.
As for the starter being bad after just playing with injectors? I suspect something else has happened to make the starter not turn.
Re: now it's the starter....
Thank you brotherhay! I was hoping the post I found on another forum about using the wrench from the tool kit was correct.brotherhay wrote: ↑Fri Oct 19, 2018 2:47 pm Its easy peas to get the starter out if you ask me.
Go check the tool box in the trunk, the bent wrench you are after is in there.
Its two nuts on the starter to get it out, that wrench will reach both. sure its tight, and you can only get maybe a 1/4 turn each time, but once the nuts are started off, should be able to do the rest with your fingers.
As for the starter being bad after just playing with injectors? I suspect something else has happened to make the starter not turn.
One follow-up question for the group. I've read that using the M30 starter from an E34 (Bosch SR441X) is a good upgrade because it's smaller and easier to work with. Any experiences or opinions on that?
Thanks, Cory
1977 530i
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
1988 320i Touring (euro)
1992 325i Cabrio
2000 M5
2015 328i (wife's daily)
Re: now it's the starter....
It's very common in the E28 world where it's an even tighter fit than on E12s. With the gear reduction it's even more powerful along with being lighter and smaller. As long as a core charge doesn't kill you it's an easy choice.cory58 wrote: ↑Sun Oct 21, 2018 7:12 amThank you brotherhay! I was hoping the post I found on another forum about using the wrench from the tool kit was correct.brotherhay wrote: ↑Fri Oct 19, 2018 2:47 pm Its easy peas to get the starter out if you ask me.
Go check the tool box in the trunk, the bent wrench you are after is in there.
Its two nuts on the starter to get it out, that wrench will reach both. sure its tight, and you can only get maybe a 1/4 turn each time, but once the nuts are started off, should be able to do the rest with your fingers.
As for the starter being bad after just playing with injectors? I suspect something else has happened to make the starter not turn.
One follow-up question for the group. I've read that using the M30 starter from an E34 (Bosch SR441X) is a good upgrade because it's smaller and easier to work with. Any experiences or opinions on that?
Thanks, Cory
Mike W.
1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter
1980 528i, 3.5 euro, 5 speed conversion
1981 528i, 3.6, Recaros and more. Project
1998 328is, quick and efficient, but not satisfying
2000 528iit, Vacation mobile/wife's grocery getter