megasquirt and m30b35 vr setup

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
marc79euro645
Posts: 27
Joined: Thu Dec 03, 2009 11:12 pm

megasquirt and m30b35 vr setup

Post by marc79euro645 »

I've sucessfully gotten my m106 to run using the 60-2 setup from an m30b35, but I'm having high rpm breakup. I've installed an 10k resistor in line, and played with the pots r52 and r56. I've got the vr pickup set at .020" clearance. Previously, I had it set at .030", but couldn't get it to stay running at idle, so I set it closer. Now it breaks up at 4500 rpm. Any help appreciated
Post Reply