Hello,
Went to release the hood yesterday and it just snapped at the release handle. At first I panicked but realized there was still cable showing and could still open it with vise grips.
Wondering if someone might have a fix or if any advise on replacing the whole cable aka Bowden cable as referred in RealOEM catalog link (#8 in diagram)?
https://www.realoem.com/bmw/enUS/showpa ... Id=41_0444
Hood Cable Snapped
Hood Cable Snapped
'81 528i... mfg date 10/80...owned since 1990
-
- Posts: 1058
- Joined: Tue Jan 06, 2009 3:50 pm
Re: Hood Cable Snapped
I have replaced that cable. It's a pretty straight forward procedure ' You just have to make sure you get all the little pieces in the right places and don't kink the cable. Looking at the diagram it would seem that part 8 is separate from part 9 but I don' recall how they were fastened together?
1976 530i. BMW 59 Triumph TR3A(rolling resto). 67 Triumph TR4A(salvageable). 86 900S Winter car
Re: Hood Cable Snapped
Thanks for the tip Karl, appreciated!
'81 528i... mfg date 10/80...owned since 1990
Re: Hood Cable Snapped
Thanks for the tip Karl, appreciated!
'81 528i... mfg date 10/80...owned since 1990