Re: Giubo
Posted: Sun Feb 19, 2023 10:09 am
I was thinking about ways to move the knob backwards. Other than shortening the linkage, bending is really the only option (there is a bend in the shifter). What might make bending slightly laborious is that the outer aluminum trim turning is potted into place with silicone, but there are clearly set screws holding it to the inner main shifter rod. Using heat would require disassembly I think, but doable.
Here's the photo Ron at Auto Solutions sent showing the assembly out of the car.
Here's the photo Ron at Auto Solutions sent showing the assembly out of the car.