Center Tie Rod

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
User avatar
528i-1981
Posts: 570
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Center Tie Rod

Post by 528i-1981 »

My last thread ended with essentially crossing the steering box off the list of perps for the steering dead-zone. I finally got the car up on the QuickJacks and quickly found that the ball joint on the center tie rod at the pitman arm has too much play. The flex disc on the spindle does not have any play. Luckily I bought a new center link from Mesa Performance. I wasn't able to split the ball joints using a fair amount of banging, so I ordered a splitter set and some pickle forks from Amazon.

In the meantime - there is a "protection cap" that is NLA (number 3 below) for the idler arm. I can't find information on this - does anyone know what it is? On the pitman side there is a washer under a dust cap, but there is only a protection cap on the idler side.

Image
(oo=00=oo) Eric
1981 528i Manual
User avatar
528i-1981
Posts: 570
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Center Tie Rod

Post by 528i-1981 »

The new center tie rod has dust boots that appear to replace the protection cap and the rubber bushing that was underneath the cap. Am I OK if I just install the new tie rod as-is, or do I need to source other parts? The protection cap appears to just function as a dust boot.

Image

The joint at the pitman was totally spent, so I'm looking forward to the improvement in steering.
(oo=00=oo) Eric
1981 528i Manual
garyinwestoz
Posts: 399
Joined: Thu Jan 29, 2009 9:05 pm
Location: perth, australia
Contact:

Re: Center Tie Rod

Post by garyinwestoz »

I acquired a RHD centre tie rod off a mate last year some time. It comes with those bearing washers!

photo attached

Image

Image
74 525 auto
76 525 - 4 speed, LPG and holley carb- restoring
77 528i- 4 speed manual
77 528i -4 speed manual getting rusty
79 528i auto - a SA car?
80 528i auto - ready to relicense
81 528i +3.5ltr - auto - restoring
86 525e 5 speed manual- dd
User avatar
528i-1981
Posts: 570
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Re: Center Tie Rod

Post by 528i-1981 »

Interesting, Gary. They must have changed the design at some point.
(oo=00=oo) Eric
1981 528i Manual
Post Reply