Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XLIX

(2005/11/22 - 2006/02/16)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Lime Rock Park - peter mooney 13:49:19 02/16/06 (1)
  • Re: Lime Rock Park - jimh 14:05:46 02/16/06 (0)
• Before I concede to the evil spirits....(long) - KenB 09:30:22 02/16/06 (5)
  • Is the AFM plugged in? - Mike E 13:10:00 02/16/06 (0)
  • Re: Before I concede to the evil spirits....(long) - jim H 11:12:29 02/16/06 (0)
  • Re: Before I concede to the evil spirits....(long) - Peter Florance 10:14:31 02/16/06 (1)
    • Re: Before I concede to the evil spirits....(long) - KenB 13:31:45 02/16/06 (0)
  • Have you tried swapping in a different ECU? nt - Adam Wilson in Chicago 09:40:44 02/16/06 (0)
• Rear Brakes - This Weeekeend H E L P ! - Jaime Obando Driving all over Houston in my E - 12 07:59:12 02/16/06 (5)
  • Re: Rear Brakes - This Weeekeend H E L P ! - Ernie in Houston 09:44:19 02/16/06 (1)
    • Paging Ernie !! - Jaime Obando Driving all over Houston in my E - 12 13:46:54 02/16/06 (0)
  • Replace rear rotors as well - Misha 08:05:19 02/16/06 (2)
    • agreed - Peter Florance 10:26:03 02/16/06 (1)
      • I got them from Autozone for 25 a piece ! - Jaime Obando Driving all over Houston in my E - 12 15:05:26 02/16/06 (0)
• A sad, but fun day - parts galore - Mike E 23:16:33 02/15/06 (0)
• Paging Adam Wilson to the e34 courtesy phone - Bob in San Jose 22:55:33 02/15/06 (1)
  • Thanks Bob, I'll add it to the calendar (nt) - Adam Wilson in Chicago 06:14:20 02/16/06 (0)
• Paging Frank Hass - IOU Beer plus - - Carl 20:50:39 02/15/06 (1)
  • Re: Paging Frank Hass - IOU Beer plus - - Frank H 12:53:51 02/16/06 (0)
• E12+M50? - Siam E12 16:18:14 02/15/06 (2)
  • seen a few m50's in e30 - papajimmm nh no bmw's 04:38:59 02/16/06 (0)
  • Re: E12+M50? - Mike W. 17:45:01 02/15/06 (0)
• paging T Han - Peter Florance - First Fives Dictator for Life 13:15:32 02/15/06 (0)
• Jaime -- Fusebox cover update - Velocewest 08:25:24 02/15/06 (2)
  • Re: Jaime -- Fusebox cover update - Jaime Obando 07:14:15 02/16/06 (1)
    • I have one from an '80 633 - Bob/E12/6er 13:17:53 02/16/06 (0)
• FiverFest -- Ok, I'm registered - Velocewest 08:21:05 02/15/06 (3)
  • Hey, two more Westerners... - Eric Q 12:39:07 02/15/06 (0)
  • ok you made me do it too! - Frank H 12:34:30 02/15/06 (1)
    • Re: ok you made me - beer powered - Carl-Seattle 12:54:42 02/15/06 (0)
• Serious: E12 M535i FOR SALE - BlackM535i 08:04:03 02/15/06 (2)
  • Everyone back off, it's MINE! More... - Jeff Olson 10:15:59 02/15/06 (1)
    • I'll trade my '78 Porsche 911SC for it (link!)... - Jeff Olson 10:19:36 02/15/06 (0)
• Looking for advice on shocks and springs - Bill Hynes 07:37:13 02/15/06 (5)
  • Re: Looking for advice on shocks and springs - jim H 11:17:22 02/16/06 (0)
  • Re: Looking for advice on shocks and springs - Eddie in TO 08:28:49 02/15/06 (3)
    • Re: Looking for advice on shocks and springs - Mikey 02:39:46 02/16/06 (1)
      • addendum - mikey 03:08:29 02/16/06 (0)
    • Re: Looking for advice on shocks and springs - T.Han 18:30:26 02/15/06 (0)
• Any takers on Brembo cross drilled rotors $120+ sh - Jamie Seattle 20:44:14 02/14/06 (1)
  • Edit above, they will fit 83-89 635 - Jamie Seattle 20:46:02 02/14/06 (0)
• 4 Mahle OX41D oil filters F/S - Jim 18:43:38 02/14/06 (0)
• (2) 1977 530i's For Sale in Midwest - Rick 16:48:54 02/14/06 (1)
  • Adding my e21 hot-rod here too. - Rick 17:47:45 02/14/06 (0)
• E-12 Headlight Assembly for Sale - Bill 15:34:00 02/14/06 (0)
• International shipping advice needed - Michael R from Melbourne 14:33:19 02/14/06 (10)
  • I have a Fedex account - Jeff C, NN, VA 05:40:51 02/15/06 (0)
  • Not cheaper locally? - Remy Davison 05:18:21 02/15/06 (1)
    • About double the price locally! - Michael R from Melbourne 15:03:55 02/16/06 (0)
  • Re: International shipping advice needed - Damien in Brisbane 17:42:02 02/14/06 (0)
  • Been shipping cameras for 1/3 the cost.... - Lars Olbimmerguy 17:38:26 02/14/06 (0)
  • Same here - Mike E 15:25:57 02/14/06 (4)
    • Mike - Who is Steve Heygood? - Michael R from Melbourne 20:33:48 02/14/06 (2)
      • Steve's listed price: - Mike E 21:10:04 02/14/06 (0)
      • Opps. Mis-spelt. - Mike E 21:04:13 02/14/06 (0)
    • I've heard... - Mike W. 16:55:56 02/14/06 (0)
• Hey Lee C... - Jeff C, NN, VA` 13:33:29 02/14/06 (0)
• Paging Wietse to the Blau/Weiss courtesy phone!! - Lee Cornett 12:40:41 02/14/06 (1)
  • Sent you an email - Lee (NT) - Wietse 14:23:27 02/14/06 (0)
• Can't Believe It! - Bryan Boyce 00:57:33 02/14/06 (2)
  • Re: Can't Believe It! - T.Han 06:07:00 02/14/06 (1)
    • I'm with you - Mike W. 18:02:20 02/15/06 (0)
• Bimmer Magazine April-2006 Whole Article on e-12's - Jaime Obando 20:46:52 02/13/06 (2)
  • Re: Bimmer Magazine April-2006 Whole Article on e-12's - Tom Masters 21:42:08 02/13/06 (1)
    • Bimmer Magazine April-2006 - Eddie in TO 05:41:58 02/14/06 (0)
• Intermitent total electrical power loss... - Tulsa Dave 19:48:37 02/13/06 (3)
  • Re: Intermitent total electrical power loss... - Kaveman 23:05:56 02/13/06 (0)
  • I'd check... - Mike W. 21:43:24 02/13/06 (0)
  • Two things... - Lenny D. 19:59:03 02/13/06 (0)
• What have I got? - Rk 18:51:35 02/13/06 (3)
  • Re: What have I got? - Troy Rudolph 13:09:57 02/14/06 (0)
  • Re: What have I got? - Velocewest 19:37:29 02/13/06 (0)
  • Re: What have I got? - Sam Schultz 19:19:00 02/13/06 (0)
• M Tech 2 Steering wheel - Michael Oswald 11:12:49 02/13/06 (2)
  • Re: M Tech 2 Steering wheel - jim@dashop 12:13:43 02/13/06 (1)
    • Re: M Tech 2 Steering wheel - Mike Oswald 14:18:06 02/14/06 (0)
• Convert A/C and other stuff - Anthony in San Rafael 08:42:10 02/13/06 (2)
  • Re: Convert A/C and other stuff - Velocewest 19:40:58 02/13/06 (1)
    • Yes, the compressor & - anthony in San Rafael 19:44:35 02/13/06 (0)
• Advise/how to/'87 325is buckets into E12 - Roma T. Colella 07:53:56 02/13/06 (6)
  • Re: Advise/how to/'87 325is buckets into E12 - Kaveman 23:02:14 02/13/06 (0)
  • Re: Advise/how to/'87 325is buckets into E12 - delbert 15:52:57 02/13/06 (0)
  • Generally speaking, Recaro-style seats - Velocewest 10:09:45 02/13/06 (3)
    • Re: Generally speaking, Recaro-style seats - Roma T. Colella 11:54:28 02/13/06 (2)
      • Should be easy - Michael R from Melbourne 02:09:21 02/15/06 (1)
        • Re: Should be easy - the photo - Michael R from Melbourne 02:11:13 02/15/06 (0)
• 77 Passenger Blinker/Lens Assymbly on Ebay - Bill 07:26:19 02/13/06 (0)
• e12's at er Fest - who's not registered yet? - Peter Florance - First Fives Dictator for Life 04:23:54 02/13/06 (20)
  • e12 is down - Brad In Texas 15:09:24 02/14/06 (0)
  • From Frappr map, what about these E12 owners?? - Adam Wilson in Chicago 06:09:19 02/14/06 (5)
    • Re: From Frappr map, what about these E12 owners?? - Jokelumina 09:28:17 02/16/06 (0)
    • Re: From Frappr map, what about these E12 owners?? - Daniel H 08:12:08 02/14/06 (3)
      • Hey Daniel! - Peter Florance 08:35:56 02/14/06 (2)
        • Re: Hey Daniel! - Daniel H 10:07:51 02/14/06 (1)
          • come down for a tech session - Peter Florance 12:32:21 02/14/06 (0)
  • Re: e12's at er Fest - who's not registered yet? - Peter Mooney 20:07:55 02/13/06 (0)
  • Guilty and I wont go as I dont like them - Sam Schultz 16:18:14 02/13/06 (3)
    • Re: Guilty and I wont go as I dont like them - Layton Chauvin 23:36:20 02/13/06 (1)
      • The only way to make the event more E12... - Peter Florance - First Fives Dictator for Life 03:55:12 02/14/06 (0)
    • Re: Guilty and I wont go as I dont like them - TCD 19:24:17 02/13/06 (0)
  • Not Guilty by reason of Insanity (nt) - Eric Q 11:56:08 02/13/06 (0)
  • Guilty - Velocewest 10:02:50 02/13/06 (0)
  • Re: e12's at er Fest - who's not registered yet? - Brett 09:42:48 02/13/06 (0)
  • Re: e12's at er Fest - who's not registered yet? - Jokelumina 09:21:25 02/13/06 (0)
  • Agreed, we need attendance from E12 owners - Adam Wilson in Chicago 07:28:18 02/13/06 (1)
    • Gee look at that one only spot from the West..(nt) - Eric Q 11:57:31 02/13/06 (0)
  • make that 5er fest - Peter Florance 04:24:31 02/13/06 (1)
    • Can't go, baby is due the week of... - M. Keehn 05:21:30 02/14/06 (0)
• 79 - 81 differences? - Damien in Brisbane 00:56:55 02/13/06 (2)
  • Re: 79 - 81 differences? - Remy Davison 03:37:39 02/13/06 (1)
    • Re: 79 - 81 differences? - Peter Florance 04:27:57 02/13/06 (0)
• '1982' E12 on ebay Oz - Remy Davison 22:11:53 02/12/06 (3)
  • To answer your question Remy... - Damien in Brisbane 18:18:15 02/13/06 (1)
    • Ah, well done, Damien - Remy Davison 04:11:37 02/14/06 (0)
  • When it rains, it pours... - Damien in Brisbane 01:00:50 02/13/06 (0)
• Paging Mr. Velocewest - Re: Fuse Box Cover - Jaime Obando 20:07:07 02/12/06 (3)
  • Re: Paging Mr. Velocewest - Re: Fuse Box Cover - Tommy 10:51:43 02/13/06 (0)
  • Sorry Jaime - Velocewest 10:04:47 02/13/06 (1)
    • thank you!! - Jaime Obando - Houston Texas USA !! 11:47:36 02/13/06 (0)
• 80 528I for sale in Vancouver BC - Gordon 19:14:45 02/12/06 (0)
• I mean starter bolts, sorry - Kevin Gailey 19:09:30 02/12/06 (0)
• srater bolts, 3 plus one stud huh? - Kevin Gailey 19:07:34 02/12/06 (2)
  • Re: srater bolts, 3 plus one stud huh? - Trevor M 07:30:03 02/13/06 (0)
  • Re: srater bolts, 3 plus one stud huh? - T.Hanson 21:49:11 02/12/06 (0)
• Anyone need a co-pilot for the 5er Fest??? - Wietse 18:15:55 02/12/06 (7)
  • Ate you coming through St. Louis? - BillWinStL 10:47:57 02/13/06 (5)
    • Re: Ate you coming through St. Louis? - Wietse 21:31:26 02/13/06 (0)
    • Wietse, I'll be heading right by.... - Frank H 18:09:38 02/13/06 (3)
      • Re: Wietse, I'll be heading right by.... - Wietse 21:30:30 02/13/06 (2)
        • Did you register yet? (nt) - Adam Wilson in Chicago 06:11:04 02/14/06 (1)
          • Yes, Mom - I did sign up! - Wietse 07:03:20 02/14/06 (0)
  • link to registration map, and more - Adam Wilson in Chicago 19:40:37 02/12/06 (0)
• 79 528i For Sale - Mark 18:07:55 02/12/06 (1)
  • link correction - Mark 19:54:52 02/12/06 (0)
• Vandals - not happy - Damien in Brisbane 15:28:48 02/12/06 (1)
  • I know the feeling - Trevor M 16:40:00 02/12/06 (0)
• Is there any easy way to have Euro style bumpers? - Mike Oswald 12:47:36 02/12/06 (1)
  • Compress the front bumper shocks - Velocewest 13:48:21 02/12/06 (0)
• Al from Oz-any luck with M90 manifold? - Remy Davison 04:08:26 02/12/06 (0)
• 77 Exhaust Questions - Eric N 20:48:46 02/11/06 (2)
  • Re: 77 Exhaust Questions - D. 14:27:32 02/14/06 (0)
  • Re: 77 Exhaust Questions - Velocewest 10:13:18 02/13/06 (0)
• lets play 20 questions - arturo fuente 15:47:43 02/11/06 (7)
  • Re: lets play 20 questions - Troy Rudolph 11:49:18 02/12/06 (0)
  • The cruise on my 77 e24 was clearly aftermarket - Lars OBG 11:26:18 02/12/06 (0)
  • Re: lets play 20 questions - T.Hanson 17:44:48 02/11/06 (3)
    • Re: lets play 20 questions - Remy Davison 04:21:13 02/12/06 (1)
      • e12 factory cruise - James (Tasmania) 19:33:14 02/15/06 (0)
    • I have cruise... - Lenny D. 23:49:09 02/11/06 (0)
  • Re: lets play 20 questions - Paint - Pete Kilner 16:48:58 02/11/06 (0)
• FS - Gasket Kit - M30 - Wietse 11:50:11 02/11/06 (2)
  • Re: FS - Gasket Kit - M30 - jim H 12:03:31 02/11/06 (1)
    • Re: FS - Gasket Kit - M30 - Wietse 12:19:36 02/11/06 (0)
• early model e24 advice wanted (Remy ) - Michael R from Melbourne 02:31:57 02/11/06 (2)
  • ...Ah, the Hartge one - Remy Davison 03:28:56 02/12/06 (0)
  • BigCoupeGroup ? - Carl-Seattle 09:45:22 02/11/06 (0)
• 520i Brake Upgrade - Pete Kilner 21:47:25 02/10/06 (6)
  • Re: 520i Brake Upgrade - James from New Zealand 00:57:45 02/11/06 (5)
    • Not a direct swap - Misha St. Lorant 18:10:49 02/11/06 (4)
      • Correct - Mike E 21:55:19 02/11/06 (3)
        • BMWDC NSW Wakefield Park - Pete K 13:53:42 02/13/06 (2)
          • Looking good! - Mike E 19:27:01 02/13/06 (0)
          • Original lines - Mike E 19:22:00 02/13/06 (0)
• SHAMELESS PLUG!!!! - James from New Zealand 20:38:52 02/10/06 (2)
  • Re: SHAMELESS PLUG!!!! - Aaron from Aus 04:13:43 02/12/06 (1)
    • Hi Aaron, sorry can't sell wheel. No replacement! - James from New Zealand 15:33:58 02/12/06 (0)
• cleaningwheels - delbert 16:55:56 02/10/06 (2)
  • Re: cleaningwheels - Velocewest 09:04:10 02/11/06 (0)
  • Re: cleaningwheels - T.Hanson 18:03:34 02/10/06 (0)
• BBS Airdam Needed: any condition ok - Misha 15:28:59 02/10/06 (0)
• Diff swap - Gary in UK 08:07:00 02/10/06 (4)
  • Re: Diff swap - D. 14:34:55 02/14/06 (0)
  • Wait and see.... - Lars Olbimmerguy 11:58:28 02/10/06 (2)
    • Re: Wait and see.... - Gary UK 12:48:07 02/10/06 (0)
    • Oops... most here tend to opt for LOWER gears..... - Lars OBG 12:01:35 02/10/06 (0)
• Need info on Euro 2.8 motor specs - BillW in StL 06:23:00 02/10/06 (2)
  • Here are a few SPECS: - Jeff Olson 08:07:06 02/10/06 (1)
    • Re: Here are a few SPECS: - Gordon 07:22:10 02/11/06 (0)
• LSD, how to adjust for more lock up - Jamie P Lyon 20:15:25 02/09/06 (2)
  • Re: LSD, how to adjust for more lock up - peter mooney 05:55:40 02/10/06 (1)
    • Re: LSD, how to adjust for more lock up - Walt Barie 05:18:21 02/13/06 (0)
• Pilot Bearing - Anthony in San Rafael 17:32:47 02/09/06 (3)
  • Re: Pilot Bearing - D. 23:03:46 02/09/06 (2)
    • Re: Pilot Bearing -Yes!! - Anthony in San Rafael 11:49:24 02/10/06 (0)
    • Yes - Misha 10:39:32 02/10/06 (0)
• O.K., here you go (outside pics of my wheels) - Adam Wilson in Chicago 14:36:00 02/09/06 (9)
  • You Suck you Cheap skate!! - Aaron from Aus 04:16:48 02/12/06 (0)
  • CAPM, PP, Fixed Income - BangkokMike 20:21:11 02/09/06 (0)
  • Re: O.K., here you go (outside pics of my wheels) - Tom(NC) 19:17:21 02/09/06 (0)
  • Re: O.K., here you go (outside pics of my wheels) - Jim 17:29:54 02/09/06 (0)
  • Uhmmm? OK Adam.... and there's a reason.... - Lars Olbimmerguy 14:55:41 02/09/06 (4)
    • Re: Uhmmm? OK Adam.... and there's a reason.... - Damien in Brisbane 15:52:04 02/09/06 (3)
      • Re: Uhmmm? OK Adam.... and there's a reason.... - Lou in Denver 16:23:08 02/09/06 (2)
        • laugh, winter storage! - Adam Wilson in Chicago 17:53:07 02/09/06 (1)
          • Re: laugh, winter storage! - T.Han 19:40:43 02/09/06 (0)
• OEM E28 M5 wheels for sale, will fit an E12 - Adam Wilson in Chicago 06:40:49 02/09/06 (7)
  • Re: OEM E28 M5 wheels for sale, will fit an E12 - brett reichart 17:39:01 02/09/06 (0)
  • That's an insane price. - TCD 07:25:17 02/09/06 (5)
    • Re: That's an insane price. - brett reichart 17:43:45 02/09/06 (0)
    • I sold a set for a grand about 3 years ago - Bob/E12/6er 12:02:19 02/09/06 (0)
    • Re: That's an insane price. - Jake Hall 08:36:13 02/09/06 (0)
    • I didn't know what the going rate was - Adam Wilson in Chicago 07:34:24 02/09/06 (1)
      • Re: I didn't know what the going rate was - T.Han 12:08:22 02/09/06 (0)
• performance exhaust - meinkampf 16:11:35 02/08/06 (10)
  • Questionable handle choices aside... - Velocewest 09:21:00 02/09/06 (5)
    • Corrections - Don Daynes 13:20:51 02/09/06 (0)
    • I surprised about the glasspack recomendations - Bob/E12/6er 12:07:44 02/09/06 (3)
      • Re: I surprised about the glasspack recomendations - peter mooney 06:01:50 02/10/06 (0)
      • Re: I surprised about the glasspack recomendations - brett reichart 17:32:05 02/09/06 (0)
      • My car has the MM system - Velocewest 13:34:22 02/09/06 (0)
  • Please use a different handle - Mike W. 21:19:51 02/08/06 (1)
    • Agreed, I almost wrote something out last night - Adam Wilson in Chicago 05:53:01 02/09/06 (0)
  • Re: performance exhaust - Jamie P Lyon 18:13:05 02/08/06 (0)
  • Re: performance exhaust - greghill-phx,az 18:10:58 02/08/06 (0)
• E12 Medical finding - ? - Carl-Seattle 15:44:34 02/08/06 (4)
  • Bad filters during paint application - bigperm206 11:33:04 02/10/06 (0)
  • Re: E12 Medical finding - ? - Craig in Davis 06:45:16 02/09/06 (0)
  • Is this picture of my car? - Hans V. from Norway 00:29:26 02/09/06 (1)
    • Re: non breadable cover - Tom Masters 11:29:21 02/09/06 (0)
• How hard is it to swap in a 740i motor? - Micah 11:27:40 02/08/06 (17)
  • what about the rear end? - Micah 21:09:27 02/08/06 (1)
    • The stock diff is stout ... - Troy Rudolph 15:04:48 02/10/06 (0)
  • Speedo Drive? - Troy Rudolph 15:18:22 02/08/06 (3)
    • Converter - Troy Rudolph 15:27:37 02/08/06 (2)
      • That rocks. Any idea on $$$? (nt) - Velocewest 09:22:55 02/09/06 (0)
      • MY PRAYERS HAVE BEEN ANSWERED!!! - Patrick McHugh 22:41:32 02/08/06 (0)
  • A few points... - Wietse 14:43:28 02/08/06 (9)
    • The Bad #3 point rebutted - Jeff C, NN, VA 11:53:40 02/11/06 (0)
    • what about a 6spd manual? - Adam Wilson in Chicago 15:09:51 02/08/06 (7)
      • Yup...but... - Wietse 15:22:36 02/08/06 (6)
        • Wietse, what are you doing on this board!!?? - Adam Wilson in Chicago 15:33:16 02/08/06 (5)
          • You must have me confused with another Wietse... - Wietse 15:53:53 02/08/06 (4)
            • you should come to 5er Fest - Adam Wilson in Chicago 16:00:23 02/08/06 (3)
              • The car will be there... (nt) - Velocewest 13:36:54 02/09/06 (0)
              • And with an amazing, M3 killing, E12... - Nick in the Springs 08:01:54 02/09/06 (1)
                • and on snow tires now less... - Wietse 19:08:22 02/09/06 (0)
  • early (i.e. '93) V8's had problems - Velocewest 13:54:01 02/08/06 (0)
• Seeking rear doors - Washington / Oregon - Carl-Seattle 08:58:57 02/08/06 (2)
  • Carl, check with Frank Haas - Velocewest 09:52:56 02/08/06 (1)
    • Re: Rear doors - Laguna30 10:03:39 02/08/06 (0)
• Someone save this fine example of E12-ness! - Jeff Olson 21:14:10 02/07/06 (4)
  • I'm three hours away right now... - Tulsa Dave 17:26:47 02/09/06 (0)
  • Anyone on FirstFives near JAX, FL? - Jeff Olson 06:47:19 02/08/06 (0)
  • yeah, saw that car, poor E12 - Adam Wilson in Chicago 21:16:46 02/07/06 (1)
    • Re: yeah, saw that car, poor E12 - T.Han 22:06:28 02/07/06 (0)
• 79 528i for sale in Sacramento, $600 - Gordon 17:14:55 02/07/06 (0)
• New BBS wheels are mounted (pictures) - Adam Wilson in Chicago 17:00:36 02/07/06 (9)
  • OMG - Incredible Adam - Brian in Calgary 21:41:33 02/08/06 (0)
  • Re: New BBS wheels are mounted (pictures) - Jim 15:51:40 02/08/06 (1)
    • I'll even admit - Adam Wilson in Chicago 06:19:12 02/09/06 (0)
  • Arrghhhhhhh...not again...drool bucket REMEMBER! - Eddie in TO 05:59:59 02/08/06 (0)
  • Wow, e12 porn! - Wietse (quietly weeping in my empty garage) 19:10:38 02/07/06 (3)
    • Re: Wow, e12 porn! - T.Han 22:09:32 02/07/06 (2)
      • It's called a reflection (commonly seen in glass) - Adam Wilson in Chicago 07:47:14 02/08/06 (1)
        • Re: It's called a reflection (commonly seen in gla - T.Han 11:38:34 02/08/06 (0)
  • Looks awsome Adam!! (nt) - Trevor M 18:44:04 02/07/06 (0)
• Why is my 530ia such a snail when it's cold?(long) - John 16:35:45 02/07/06 (4)
  • Re: Why is my 530ia such a snail when it's cold?(long) - Peter Florance 04:40:30 02/08/06 (0)
  • Re: Why is my 530ia such a snail when it's cold?(l - Mike W. 19:22:11 02/07/06 (0)
  • Re: Why is my 530ia such a snail when it's cold?(long) - Trevor M 18:51:00 02/07/06 (1)
    • Thanks guys - John 19:07:13 02/10/06 (0)
• Looking for Greg Johnson - Willard Nicholsdon 16:35:07 02/07/06 (0)
• 528i grille emblem - where can I find? - Jeff in California 16:04:59 02/07/06 (6)
  • Re: 528i grille emblem - where can I find? - Adam Wilson, firstfives grille badge Czar 10:50:24 02/08/06 (2)
    • Not too happy with it myself... - Nick in the Springs 17:08:49 02/08/06 (0)
    • Need to work on my car's worthiness - Jeff in California 12:55:10 02/08/06 (0)
  • First Fives Emblem - Nick in the Springs 10:03:41 02/08/06 (0)
  • Re: 528i grille emblem - BillW 09:00:24 02/08/06 (1)
    • Not a bad idea - looks good Bill! I will try that - Jeff in California 12:52:23 02/08/06 (0)
• Wanted: 1980-1981 528i 5-speed in NE Ohio - Johnny 14:15:58 02/07/06 (0)
• 2nd Call for pristine E12 for 5er Fest - Peter Florance - First Fives Dictator for Life 03:32:00 02/07/06 (3)
  • Uhh.... - Eric Q 17:57:41 02/07/06 (0)
  • Re: 2nd Call for pristine E12 for 5er Fest - Frank H 11:41:05 02/07/06 (1)
    • Re: 2nd Call for pristine E12 for 5er Fest - T.Han 13:23:40 02/07/06 (0)
• Need tech. info on BMW stuff ( - Micah 21:59:33 02/06/06 (14)
  • Micah, the check arrived! (picture included) - Adam Wilson in Chicago 10:30:35 02/07/06 (5)
    • Adam's truck - Trevor M 18:56:52 02/07/06 (0)
    • Nice truck! - Don Daynes 14:12:36 02/07/06 (0)
    • Drool bucket required - Eddie in TO 13:51:50 02/07/06 (0)
    • Re: Micah, the check arrived! (picture included) - T.Han 13:26:15 02/07/06 (1)
      • two dirty tires are in the boot. (nt) - Adam Wilson in Chicago 13:31:37 02/07/06 (0)
  • Re: Need tech. info on BMW stuff ( - Peter Florance 03:12:39 02/07/06 (7)
    • and... - Remy Davison 03:25:50 02/07/06 (6)
      • and more... - Velocewest 09:23:45 02/07/06 (2)
        • Still more.......... - chris hollis 11:44:37 02/07/06 (1)
          • Continuing on... - Mike W. 19:08:36 02/07/06 (0)
      • Erratum - Remy Davison 05:28:26 02/07/06 (1)
        • don't forget creatively badged cars - Adam Wilson in Chicago 10:39:42 02/07/06 (0)
      • Also M for Motorsports and the ultra rare - Big Dog 05:10:04 02/07/06 (0)
• swap 77 530i hazard button to 80 528i - Jeff in California. 16:00:00 02/06/06 (0)
• Fuse Box Cover - Needed. - Jaime Obando 14:31:38 02/06/06 (7)
  • What year is your car? - Velocewest 09:30:25 02/07/06 (3)
    • 1979 BMW 528i Automatic - Runs like a Champ - Jaime Obando 12:54:35 02/07/06 (2)
      • I may have a decent cover for that year - Velocewest 23:13:20 02/07/06 (1)
        • How much $$. . .? Please Reveal the C O S T ?? - Jaime Obando 18:57:26 02/12/06 (0)
  • try Brian da Parts Pimp - Peter Florance 03:39:09 02/07/06 (0)
  • Where are you, I bought at the dealer in - Big Dog 14:40:12 02/06/06 (1)
    • I'm in HOUSTON, TEXAS - USA !! - Jaime Obando 12:56:11 02/07/06 (0)
• 528i mpg - Dom Sharman 10:10:51 02/06/06 (0)
• 80 528i being parted in SoCal! - Bob/E12/6er 09:23:24 02/06/06 (0)
• 3.46 sideloader LSD on ebay - Adam Wilson in Chicago 07:52:57 02/06/06 (2)
  • Great... - Jeff C, NN, VA 21:08:28 02/06/06 (1)
    • Re: Great... - J,B 04:32:15 02/10/06 (0)
• 79 528i for sale - glenn 06:58:36 02/06/06 (1)
  • where? - Peter Florance - First Fives Dictator for Life 03:16:49 02/07/06 (0)
• 77 530i 87 3.5 engine swap - sarah 18:20:50 02/05/06 (1)
  • where is it located? nt - stewart in slc 19:39:45 02/05/06 (0)
• Parting Out '79 E12 w/ 1991 3.5L - Nick in the Springs 16:13:47 02/05/06 (2)
  • where's it at? nt - stewart in slc 19:37:11 02/05/06 (1)
    • Colorado Springs, CO - Nick in the Springs 00:34:09 02/06/06 (0)
• still no start - KenB 12:43:52 02/05/06 (8)
  • Re: still no start - Trevor M 16:20:45 02/05/06 (0)
  • Re: still no start - Lenny D. 14:22:41 02/05/06 (6)
    • OUCH! how to test?! - KenB 15:38:38 02/05/06 (5)
      • How - Mike W. 22:21:54 02/05/06 (0)
      • Re: OUCH! how to test?! - Karl in KS 21:58:35 02/05/06 (0)
      • Re: OUCH! how to test?! - Anthony in San Rafael 20:57:26 02/05/06 (2)
        • test results - KenB 22:28:37 02/05/06 (1)
          • Another source... - Lenny D. 08:29:17 02/06/06 (0)
• Need a right side signal lense for E12 - Michael Baum 12:16:27 02/05/06 (4)
  • Seller who posted left on ebay has right - Jeff in California 16:26:21 02/08/06 (0)
  • Like this... - Jeff 11:08:20 02/06/06 (2)
    • I guess that is left and you need right though - Jeff 11:21:05 02/06/06 (1)
      • New front lens = $28 New rear lens =$10. - Carl-Seattle 19:35:14 02/06/06 (0)
• e12 or e28 fusebox? - Patrick McHugh 21:38:19 02/04/06 (8)
  • I have it figured out, what one is the combo? nt - Patrick McHugh 19:50:58 02/06/06 (0)
  • Re: e12 or e28 fusebox? - Patrick McHugh 20:42:53 02/05/06 (6)
    • From what I remember.... - Wietse 18:51:43 02/06/06 (0)
    • That's what Wietse did on my car - Velocewest 20:47:45 02/05/06 (4)
      • Anybody have a picture? - Patrick McHugh 22:45:36 02/05/06 (3)
        • Drehzahlschalter - Carl-Seattle 12:05:42 02/06/06 (2)
          • Do I need to to anything to it? - Patrick McHugh 19:47:41 02/06/06 (1)
            • If it has been water logged- replace it ! - Carl-Seattle 08:37:37 02/07/06 (0)
• Shortened Bumper Pics - John 20:00:21 02/04/06 (3)
  • Re: Shortened Bumper Pics - Daniel H 20:24:55 02/04/06 (2)
    • Re: Shortened Bumper Pics - T.Han 21:23:31 02/04/06 (1)
      • I feel your pain... - Velocewest 09:39:06 02/07/06 (0)
• This car is driving me crazy... - JoshInAtl 18:13:49 02/04/06 (5)
  • what is the specific problem? (nt) - Adam Wilson in Chicago 06:55:38 02/05/06 (2)
    • Re: what is the specific problem? (nt) - JoshInAtl 07:10:08 02/05/06 (1)
      • LMAO, o.k......... - Adam Wilson in Chicago 07:57:41 02/05/06 (0)
  • Just take a break from it................. - Daniel H 20:27:16 02/04/06 (1)
    • I am in the same shoes. - Patrick McHugh 21:41:19 02/04/06 (0)
• E24 M635 being parted in Portland - Gordon 15:30:34 02/04/06 (8)
  • Re: E24 M635 being parted in Portland - T.Han 21:36:11 02/04/06 (4)
    • I'm not average - Mike W. 23:15:24 02/04/06 (2)
      • Honestly, I don't know what the challenge is - Velocewest 20:56:07 02/05/06 (0)
      • Re: I'm not average - T.Han 06:41:46 02/05/06 (0)
    • M6 US version, M635csi euro version (nt) - Adam Wilson in Chicago 22:37:00 02/04/06 (0)
  • Pretty amazing, but front bumper looks usable - Lars OBG 16:49:34 02/04/06 (2)
    • I'm sure some would - Mike W. 23:12:20 02/04/06 (1)
      • Well, have seen bumper a lot worse looking - Lars OBG 15:18:17 02/05/06 (0)
• 78 530i 4 speed FS, $1875 - Gordon 15:22:18 02/04/06 (0)
• Selling my '78 Porsche 911SC. Trades? - Jeff Olson 12:09:27 02/04/06 (4)
  • I have a .......... - chris hollis 17:36:22 02/06/06 (1)
    • STILL have it? - Jeff Olson 17:50:25 02/07/06 (0)
  • SC 3.0's are pretty reliable - Misha 15:19:34 02/04/06 (1)
    • Porsche issues... - Jeff Olson 07:13:51 02/05/06 (0)
• Glove Box support Straps - Don in Tulsa 09:31:27 02/04/06 (1)
  • Re: Glove Box support Straps - Peter Florance 11:31:40 02/05/06 (0)
• e28 based euro e24 on the bay...cheap - Wietse 09:01:02 02/04/06 (0)
• Car of the month: Maintenence accuracy update - Tommy Allen 23:52:14 02/03/06 (2)
  • Re: Car of the month: Maintenence accuracy update - Scott Jenkinson 20:33:00 02/04/06 (0)
  • Re: Car of the month: Maintenence accuracy update - KenB 00:34:12 02/04/06 (0)
• Getrag 262 box - Gary 17:31:01 02/03/06 (7)
  • Re: Getrag 262 box from another member in the uk. - colinwhyte 13:01:21 02/04/06 (1)
    • Re: Getrag 262 box from another member in the uk. - Gary 11:24:09 02/08/06 (0)
  • Re: Getrag 262 box - Mike W. 18:09:53 02/03/06 (4)
    • Re: Getrag 262 box - Gary 18:35:29 02/03/06 (3)
      • Re: Getrag 262 box - Mike W. 20:01:20 02/03/06 (0)
      • Re: Getrag 262 box - stewart in slc 18:43:49 02/03/06 (1)
        • Re: Getrag 262 box - Gary 18:53:10 02/03/06 (0)
• FS: Brembo cross drilled rotors $140 +shipping - Jamie Seattle 11:14:03 02/03/06 (2)
  • Jaime, would they work on an '84 euro 635 - bigperm206 13:51:50 02/03/06 (1)
    • I pretty sure they would - Jamie Seattle 15:48:58 02/03/06 (0)
• Interesting 5er for sale . . . - Bob/E12 6er 10:18:41 02/03/06 (5)
  • Wow - Velocewest 16:38:57 02/03/06 (2)
    • Go get it Tony - Frank H 09:39:06 02/04/06 (1)
      • Welcome back! - Velocewest 10:58:21 02/04/06 (0)
  • It has the BMP E12 bodykit on it - Adam Wilson in Chicago 10:23:03 02/03/06 (1)
    • those seats don't look stock e12 nt - stewart in slc 15:06:43 02/03/06 (0)
• something fishy w/#5 - KenB 02:09:34 02/03/06 (1)
  • Re: something fishy w/#5 - Tom (NC) 08:12:01 02/03/06 (0)
• Part Anyone? Another E12 - Tom Masters 20:37:13 02/02/06 (4)
  • I want the car - How do I bring it to HoustonTX ? - Jaime Obando 13:12:52 02/03/06 (2)
    • Re: I want the car - How do I bring it to HoustonTX ? - Ernie in Houston 07:26:12 02/04/06 (0)
    • Re: I want the car - How do I bring it to HoustonTX ? - Tom Masters 13:51:28 02/03/06 (0)
  • Re: Part Anyone? Another E12 - T.Han 06:00:55 02/03/06 (0)
• Another E12 looking for a home - Tom Masters 20:34:23 02/02/06 (0)
• Opinions on Rear End Ratios w/Big HP - Jeff C, NN, VA 17:24:31 02/02/06 (7)
  • Re: Opinions on Rear End Ratios w/Big HP - Loren 14:36:03 02/03/06 (1)
    • Hey Loren!! - Jeff C, VA, NN 18:44:01 02/05/06 (0)
  • Re: Opinions on Rear End Ratios w/Big HP - TCD 19:17:43 02/02/06 (2)
    • Thanks all ... Todd - another Q - Jeff C 06:43:39 02/03/06 (1)
      • Re: Thanks all ... Todd - another Q - TCD 13:16:56 02/03/06 (0)
  • Depends on the curve - Mike W. 17:38:40 02/02/06 (1)
    • Mine has a 3.64 - Velocewest 19:41:40 02/02/06 (0)
• COTM - Just posted. Have a look (eom) - Troy Rudolph (Webmaster) 17:06:19 02/02/06 (5)
  • Re: COTM - Just posted. Have a look (eom) - Tom (NC) aka Tommy 12:32:45 02/03/06 (1)
    • Don't worry, it's not idolatry - Velocewest 16:43:55 02/03/06 (0)
  • Thank you Jesus... - Jeff Olson 06:53:34 02/03/06 (1)
    • AMEN! - Eddie in TO 08:25:24 02/03/06 (0)
  • Clearly Tommy has been walking with the Lord - Velocewest 19:44:59 02/02/06 (0)
• Petronix Conversion FAQ posted - Peter Florance - First Fives Dictator for Life 16:53:26 02/02/06 (1)
  • I'm such a.... - Mike in Lancaster 06:51:58 02/06/06 (0)
• Needed: non-working leaking heater control valves - Jeff R 13:38:07 02/02/06 (2)
  • Re: Needed: non-working leaking heater control valves - Peter Florance 04:55:22 02/03/06 (0)
  • I'll take a look, but - Mike W. 17:46:42 02/02/06 (0)
• WTB: Need a brake booster!!!!! Help!!! - Ian 13:26:22 02/02/06 (1)
  • Re: WTB: Need a brake booster!!!!! Help!!! - jim@dashop 16:46:37 02/02/06 (0)
• E12 Ebay Parts - Bill 09:56:38 02/02/06 (2)
  • guess i have been tossing wrong stuff - papajimmm nh no e23's 18:50:55 02/02/06 (1)
    • Re: guess i have been tossing wrong stuff - BangkokMike 19:02:20 02/02/06 (0)
• fuel mileage - Pierre 19:42:57 02/01/06 (9)
  • I now get about 14 mpg - Brian in Calgary 21:39:23 02/05/06 (0)
  • The drain might be the trunk light... - Brian in Camarillo 09:06:39 02/03/06 (0)
  • Re: fuel mileage - Tom Masters 09:35:27 02/02/06 (0)
  • Re: fuel mileage - Don in NJ 06:31:49 02/02/06 (0)
  • Re: fuel mileage - KenB 23:14:13 02/01/06 (4)
    • Re: fuel mileage/battery killers - Will Ollison 05:18:38 02/02/06 (3)
      • Thanks but I have manual locks. - Pierre 16:39:27 02/02/06 (0)
      • Where is the cent. lock. main controller? nt - KenB 11:41:25 02/02/06 (1)
        • Driver's door. - Will Ollison 13:27:53 02/02/06 (0)
• 78 535 - Dana 18:39:20 02/01/06 (3)
  • Re: 78 535 - Velocewest 19:52:55 02/02/06 (2)
    • Re: 78 535 - Dana 15:30:15 02/03/06 (1)
      • Re: 78 535 - Velocewest 20:02:37 02/03/06 (0)
• what's this about LSD's - Micah 12:18:27 02/01/06 (8)
  • Best explanation Ive seen "My Cousin Vinnie" - Lars Olbimmerguy 18:07:59 02/01/06 (3)
    • Re: - Jeff R 13:42:04 02/02/06 (1)
      • what Lubrication Sex and Domination LSD - Aaron from Aus 02:43:14 02/03/06 (0)
    • She looks good in her outfits also - papajimmm nh 18:54:18 02/01/06 (0)
  • Re: what's this about LSD's - Eddie in TO 15:03:21 02/01/06 (0)
  • Micah .... search function!! - Adam Wilson in Chicago 12:43:52 02/01/06 (2)
    • Re: Micah .... search function!! - T.Han 13:55:35 02/01/06 (0)
    • Re: Micah .... search function!! - Micah 12:58:52 02/01/06 (0)
• 3 hours left for my Motorsport stripe auction - Adam Wilson in Chicago 09:34:01 02/01/06 (2)
  • Thanks for the stripes - Micah 12:59:37 02/01/06 (1)
    • I can't wait to see them on your car! (nt) - Adam Wilson in Chicago 13:15:30 02/01/06 (0)
• Anyone have a cam removal frame to sell? - Velocewest 09:14:14 02/01/06 (0)
• e12 1977 vs. 1979 door trim... - Chris Trevelyan... 23:05:38 01/31/06 (0)
• e29 rotors - peter mooney 18:24:37 01/31/06 (10)
  • Offset is different - colinwhyte 16:00:27 02/03/06 (0)
  • E28 brakes - Justin in C'ville 20:46:22 01/31/06 (3)
    • About those Wilwoods... - Eric Q 15:21:17 02/01/06 (1)
      • let me do some measurements - Justin in C'ville 15:27:51 02/01/06 (0)
    • See Jamie's post below - Velocewest 21:05:27 01/31/06 (0)
  • Re: e29 rotors - Karl in KS 19:37:08 01/31/06 (4)
    • Umm I think you missed the question - peter mooney 04:34:20 02/01/06 (3)
      • what about E23 front rotors, any cheaper? - Adam Wilson in Chicago 08:16:00 02/01/06 (2)
        • Re: what about E23 front rotors, any cheaper? - Velocewest 09:09:49 02/01/06 (1)
          • e23 caliper spacing is appx 28mm (nt) - Velocewest 20:51:54 02/01/06 (0)
• New Brembo Rotors for sale!!!!!!!!!!! - Jamie Seattle 18:21:41 01/31/06 (0)
• Gas Tank ? - Tom 17:37:51 01/31/06 (1)
  • I wouldn't worry about it (nt) - Velocewest 09:10:35 02/01/06 (0)
• What gives with the car of the month pics??? - Michael Oswald 12:58:58 01/31/06 (3)
  • Re: What gives with the car of the month pics??? - Peter Florance - First Fives Dictator for Life 03:11:11 02/01/06 (2)
    • Re: What gives with the car of the month pics??? - Tom (NC) 07:49:01 02/01/06 (1)
      • reverse coup - Peter Florance 08:07:04 02/01/06 (0)
• 3.07 LSD on ebay - Eddie in TO 10:14:26 01/31/06 (0)
• Conver to motro 3.5 start w/ e28Accelerator Cable - Anthony in San Rafael 08:12:40 01/31/06 (12)
  • Troy, can we please add these pics/text to FAQ? - Velocewest 15:04:22 02/02/06 (2)
    • Oops, I guess Peter is the FAQ maven... - Velocewest 15:05:56 02/02/06 (1)
      • done - Peter Florance - First Fives Dictator for Life 16:45:14 02/02/06 (0)
  • Bellcrank pivot to cable hole center 50mm (nt) - Velocewest 20:52:50 02/01/06 (2)
    • Pictures big help - anthony in San Rafael 09:23:32 02/02/06 (1)
      • Cable - Velocewest 12:43:03 02/02/06 (0)
  • I'll measure the bellcrank tonight for - Velocewest 09:36:34 02/01/06 (0)
  • rod to cable, pic 2 - Velocewest 20:53:30 01/31/06 (0)
  • rod to cable, pic 1 - Velocewest 20:45:41 01/31/06 (0)
  • OK, OK , I'm a flake! - Velocewest 11:13:11 01/31/06 (0)
  • I'm at the same point - Patrick McHugh 10:18:00 01/31/06 (1)
    • Hmmm.. - Anthony in San Rafael 12:31:31 01/31/06 (0)
• E12 FS in Kansas City - Tom Masters 23:19:43 01/30/06 (0)
• In search of HELLA h3 668-00 Fog Lens/Lamps - Jeff C , L.A. 20:15:54 01/30/06 (9)
  • Lenny - Jeff C. 11:12:33 02/06/06 (0)
  • Re: In search of HELLA h3 668-00 Fog Lens/Lamps - Tom Masters 20:47:27 01/31/06 (0)
  • Here's what I did... - Lenny D. 23:11:19 01/30/06 (6)
    • Thanks - straightforward installation? or diff? - Jeff 08:47:13 01/31/06 (5)
      • Re: Thanks - straightforward installation? or diff - Lenny D. 09:32:56 01/31/06 (4)
        • link is a good price - i was avoiding replacing - Jeff 09:40:42 01/31/06 (3)
          • Re: link... - Lenny D. 09:47:39 01/31/06 (2)
            • Re: link... - Lenny D. 09:53:15 01/31/06 (1)
              • Thanks again - yeah I'm looking for clear/white - Jeff C 10:38:06 01/31/06 (0)
• 3.5 motronic swap... Speedometer? Tachometer? - Patrick McHugh 19:39:48 01/30/06 (8)
  • Tach no, speedo yes - Mike W. 22:18:47 01/30/06 (0)
  • Re: 3.5 motronic swap... Speedometer? Tachometer? - Patrick McHugh 22:16:43 01/30/06 (4)
    • Re: 3.5 motronic swap... Speedometer? Tachometer? - Velocewest 12:02:24 01/31/06 (3)
      • Good comment, you read my mind - Patrick McHugh 20:31:53 01/31/06 (2)
        • Are you going to attempt this subframe swap soon? - Justin in C'ville 13:26:30 02/01/06 (1)
          • Re: Are you going to attempt this subframe swap soon? - Patrick McHugh 02:40:25 02/05/06 (0)
  • what trans did you install? - Velocewest 20:06:30 01/30/06 (0)
  • its a mechanical unit - Sam Schultz 19:46:26 01/30/06 (0)
• Wierd wierd starting woes ... starter or ignition? - john a 16:47:26 01/30/06 (2)
  • Re: Wierd wierd starting woes ... starter or ignition? - Daniel H 07:12:04 01/31/06 (1)
    • Re: Wierd wierd starting woes ... starter or ignition? - NC Doug 11:55:34 02/05/06 (0)
• Wires to the Starter - Dan Lafley 16:38:34 01/30/06 (1)
  • Re: Wires to the Starter - Daniel H 07:10:55 01/31/06 (0)
• New Tire Recs - 195/70R 14 - Jeff C. 10:25:10 01/30/06 (5)
  • Sumitomo HTR200? - Peter Florance 03:18:37 02/01/06 (0)
  • Re: New Tire Recs - 195/70R 14 - Brad In Texas 14:17:09 01/30/06 (0)
  • Upgrade to 215/60/14 - Misha 13:43:24 01/30/06 (0)
  • Re: New Tire Recs - 195/70R 14 - Velocewest 12:04:28 01/30/06 (0)
  • Re: New Tire Recs - 195/70R 14 - KenB 11:43:35 01/30/06 (0)
• B & G springs screwing me over... long - Brett 09:17:35 01/30/06 (4)
  • Re: B & G springs screwing me over... long - Troy Rudolph 06:36:29 01/31/06 (0)
  • Did you pay with a credit card? - Velocewest 12:05:45 01/30/06 (2)
    • Re: Did you pay with a credit card? - Brett 12:34:58 01/30/06 (1)
      • Re: Did you pay with a credit card? - T.Han 13:10:36 01/30/06 (0)
• another ebay item, E12 Alpina gauges - Adam Wilson in Chicago 07:44:59 01/30/06 (0)
• 3rd oversize, "L" block pistons on ebay - Adam Wilson in Chicago 07:43:14 01/30/06 (5)
  • never go over 2ed over - Sam 19:48:43 01/30/06 (4)
    • Surely you jest - Mike W. 22:11:59 01/30/06 (2)
      • Mike's response - Adam Wilson in Chicago 08:06:34 01/31/06 (1)
        • I know, I know - Mike W. 16:50:17 01/31/06 (0)
    • but you're talking race cars - Adam Wilson in Chicago 19:53:41 01/30/06 (0)
• 79 530i parts for sale - Bill 06:12:56 01/30/06 (6)
  • Pics of Passenger Seat and Dash - Bill 15:38:24 01/30/06 (0)
  • Re: 79 530i parts for sale - Bill 09:50:19 01/30/06 (0)
  • Re: 79 530i parts for sale - JoshInAtl 09:41:57 01/30/06 (3)
    • Re: 79 530i parts for sale - Bill 10:42:54 01/30/06 (2)
      • Re: 79 530i parts for sale - JoshInAtl 12:11:09 01/30/06 (1)
        • Re: 79 530i parts for sale - JoshInAtl 12:13:11 01/30/06 (0)
• Intake questions. . . . - Michael Oswald 22:56:00 01/29/06 (6)
  • Re: Intake questions. . . . - Velocewest 12:24:31 01/30/06 (5)
    • Re: Intake questions. . . .e12 (early and late) - Wietse 22:06:36 01/30/06 (1)
      • You REALLY wanted that Motronic, dincha! ;-) (nt) - Velocewest 09:06:05 02/01/06 (0)
    • Actually easier to change the booster... - Big Dog 16:17:52 01/30/06 (1)
      • Yes, didn't intend to suggest it was hard - Velocewest 17:34:02 01/30/06 (0)
    • Re: Intake questions. . . . - Trevor M 13:59:35 01/30/06 (0)
• e12 vs. e3 in rust.... - Chris Trevelyan... 22:54:37 01/29/06 (3)
  • E3's do rust more - Mike W. 22:25:18 01/30/06 (0)
  • Re: e12 vs. e3 in rust.... - Velocewest 12:32:32 01/30/06 (1)
    • Re: e12 vs. e3 in rust.... - Carl-Seattle 13:33:23 01/30/06 (0)
• oil pans - peter mooney 18:27:10 01/29/06 (0)
• calling firstfives members for 5er Fest 2006 - Adam Wilson in Chicago 17:32:16 01/29/06 (11)
  • I hope to be there at least one day in the e12 - Patrick McHugh 22:18:10 01/30/06 (0)
  • Me too :-) nt - Andrew 16:35:37 01/30/06 (0)
  • Re: calling firstfives members for 5er Fest 2006 - Jokelumina 15:25:24 01/30/06 (0)
  • Planning to make the trip - Velocewest 12:00:54 01/30/06 (2)
    • Comrade Haas calling Comrad Florance - Adam Wilson in Chicago 12:46:57 01/30/06 (1)
      • Re: Comrade Haas calling Comrad Florance - Peter Florance 18:30:12 01/30/06 (0)
  • I'll be there - Walt Barie 05:18:53 01/30/06 (1)
    • Walt, you should try to hook up with Frank and me - Velocewest 19:38:04 02/02/06 (0)
  • I'll be there in spirit! - Jim Hineline 03:44:04 01/30/06 (0)
  • I'll be there but... - Eric Q 00:41:19 01/30/06 (0)
  • I'll be there - Peter Florance 20:37:01 01/29/06 (0)
• Need help with new project 80 528iA needs tranny.. - craig day 16:44:04 01/29/06 (3)
  • If you want to keep an auto trans (I've had two - Lars Olbimmerguy 20:03:24 01/29/06 (0)
  • Where are you located? - Dale 17:14:54 01/29/06 (1)
    • Out West in Utah!!! - craig day 14:19:08 01/30/06 (0)
• 1981 528i 'Euro' For Sale in North Carolina... - Jeff Olson 15:31:39 01/29/06 (0)
• Switch fix (thanks Dan) - Tom 08:30:47 01/29/06 (0)
• Help: 1980 528i starter removal - Keith 01:09:30 01/29/06 (4)
  • Re: Help: 1980 528i starter removal - Keith 01:11:54 01/29/06 (3)
    • yes, it's a 17mm head - ...tom 05:01:16 01/29/06 (0)
    • that top bolt is a PITA - stewart in slc 01:31:29 01/29/06 (1)
      • I don't know why it's such a problem - Adam Wilson in Chicago 07:07:27 01/29/06 (0)
• E12 in Atlanta - Kevin 20:17:35 01/28/06 (2)
  • AWESOME Sears minibike! - Jeff Olson 14:41:07 01/29/06 (1)
    • I stand corrected, J.C. PENNEY minibike... - Jeff Olson 14:46:43 01/29/06 (0)
• E12 in Atlanta - Kevin 20:17:07 01/28/06 (2)
  • CORRECT link for the E12 For Sale in Atlanta GA... - Jeff Olson 14:43:55 01/29/06 (1)
    • Thanks I was checking out that old school mini - Kevin 05:07:08 01/30/06 (0)
• ANOTHER Starting Problem.... - Dan Lafley 19:37:01 01/28/06 (1)
  • More Info - Dan Lafley 19:45:17 01/28/06 (0)
• Cheap Ass Switches - Tom (NC) 19:24:54 01/28/06 (5)
  • The fix is easy and makes sense - Adam Wilson in Chicago 21:25:30 01/28/06 (4)
    • Re: The fix is easy and makes sense - Tom 07:16:48 01/29/06 (3)
      • Try this - Carl 09:42:40 01/29/06 (2)
        • Found it here: - Carl 09:55:51 01/29/06 (1)
          • Re: Found it here: - Tom 19:29:57 01/29/06 (0)
• WTB good used head. - Preston in Seattle 15:04:28 01/28/06 (7)
  • Re: WTB good used head. - Patrick McHugh 22:27:22 01/28/06 (0)
  • Bad Valve? - John in Simi Valley 18:26:16 01/28/06 (4)
    • Doesn't the '81 head have the larger water ports? - Michael Oswald 19:23:26 01/29/06 (3)
      • No, the early heads have a single large hole port - Velocewest 20:52:43 01/29/06 (2)
        • So fill me in. - Michael Oswald 22:53:17 01/29/06 (1)
          • Read Technical FAQ - Velocewest 20:17:30 01/30/06 (0)
  • Re: WTB good used head. - Will Ollison 15:13:16 01/28/06 (0)
• Reading light for e12 on ebay - Michael R from Melbourne 14:00:54 01/28/06 (1)
  • Best guess -- C pillar mount - Velocewest 12:13:56 01/30/06 (0)
• help: 1980 BMW 528i starter removal - Keith 10:51:48 01/28/06 (2)
  • Re: help: 1980 BMW 528i starter removal - T.Hanson 11:53:01 01/28/06 (1)
    • Be sure to remove the top one first - Mike W. 12:32:12 01/28/06 (0)
• E12 & E28 buyers guide in April Bimmer mag - Adam Wilson in Chicago 08:33:40 01/28/06 (2)
  • Re: E12 & E28 buyers guide in April Bimmer mag - Carl 09:36:04 01/28/06 (1)
    • Re: E12 & E28 buyers guide in April Bimmer mag - Remy Davison 04:50:31 01/29/06 (0)
• 90 735i 5 speed for sale - Gordon 07:33:57 01/28/06 (0)
• Found a 1980 320iA 5-speed. Need some advice... - Jeff R 16:21:09 01/27/06 (10)
  • Thanks for the all the info! - Jeff R 08:55:15 01/28/06 (0)
  • We had one - Karl in KS 20:24:56 01/27/06 (0)
  • Re: Found a 1980 320iA 5-speed. Need some advice... - jim@dashop 20:00:00 01/27/06 (0)
  • Pretty much my least favorite BMW - Mike W. 17:37:53 01/27/06 (2)
    • Too bad you haven't owned an e32 . . .a real BMW. - Mike Oswald 22:58:54 01/29/06 (0)
    • Try one in Euro form - Velocwest 20:27:11 01/29/06 (0)
  • Re: Found a 1980 320iA 5-speed. Need some advice. - T.Hanson 16:59:04 01/27/06 (3)
    • Re: Found a 1980 320iA 5-speed. Need some advice. - Gordon 08:30:35 01/28/06 (1)
      • trannys - Mike W. 10:54:03 01/28/06 (0)
    • Labor Costs, etc. - Jeff R 17:29:19 01/27/06 (0)
• Wondering if this ECU will work? - Michael Oswald 13:59:12 01/27/06 (3)
  • Re: Wondering if this ECU will work? - Peter Florance 18:04:38 01/27/06 (2)
    • Thanks, - Michael Oswald 20:00:18 01/27/06 (1)
      • Re: Thanks, - Peter Florance 03:21:40 02/01/06 (0)
• BMW E12 NOS OEM and used parts - Evan Smith 08:01:00 01/27/06 (1)
  • Re: BMW E12 NOS OEM and used parts - JoshInAtl 13:12:11 01/27/06 (0)
• NE1 need the plastic piece behind US bumper FREE - papajimm nh no bmw's 05:09:06 01/27/06 (0)
• Just dropped the 3.5 into the e12! - Patrick McHugh 00:46:59 01/27/06 (7)
  • Re: Just dropped the 3.5 into the e12! - trevor 21:55:44 01/27/06 (0)
  • join the club - Karl in KS 20:27:02 01/27/06 (0)
  • Re: Just dropped the 3.5 into the e12! - T.Hanson 17:07:22 01/27/06 (0)
  • Re: Just dropped the 3.5 into the e12! - don in nj 06:31:05 01/27/06 (3)
    • PICS - Patrick McHugh 17:04:06 01/27/06 (2)
      • Re: PICS - T.Han 17:29:34 01/27/06 (1)
        • I'm invincible unless i die! - Patrick McHugh 22:32:31 01/28/06 (0)
• Did I see your car last night in Bellevue, WA? - Micah 21:26:09 01/26/06 (0)
• Fuel Pump inside tank & Maintenance - Jaime Obando 20:12:46 01/26/06 (2)
  • Re: Fuel Pump inside tank & Maintenance - D. 23:21:40 02/09/06 (0)
  • Re: Fuel Pump inside tank & Maintenance - Carl 20:23:58 01/26/06 (0)
• Getting my E12 back update - Jeff C 19:13:17 01/26/06 (1)
  • Re: Getting my E12 back update - T.Hanson 20:14:45 01/26/06 (0)
• Sorry Chuck NC...... - NC Doug 17:03:34 01/26/06 (1)
  • UM.......1980 528i.......drats......(not 525i) NT - NC Doug 17:08:26 01/26/06 (0)
• Is there a way to revive clear coat? - don in nj 10:48:35 01/26/06 (7)
  • Generally, the fogging is between the clear - Lars OBG 18:28:42 01/26/06 (3)
    • I know that's what they say, but - Mike W. 22:13:06 01/26/06 (1)
      • That's correct. Clear coat does break down - Lars 08:16:08 01/27/06 (0)
    • Re: Generally, the fogging is between the clear - T.Hanson 20:02:28 01/26/06 (0)
  • Re: Is there a way to revive clear coat? - T.Han 16:13:10 01/26/06 (0)
  • Re: Is there a way to revive clear coat? - jim H 15:22:07 01/26/06 (1)
    • Re: Is there a way to revive clear coat? - don in nj 06:28:14 01/27/06 (0)
• 1979 E12, expansion valve replaced - jim H 09:11:26 01/26/06 (4)
  • Why use r12? - Michael Oswald 16:11:43 01/27/06 (1)
    • Re: Why use r12? - jim H 18:28:37 01/27/06 (0)
  • R12, available - Jeff R 16:03:43 01/27/06 (0)
  • Good Enough for Technical FAQ - Jaime Obando 19:56:01 01/26/06 (0)
• my E12 and bad rumors - Jeff C -- NN, VA 06:49:04 01/26/06 (2)
  • Re: my E12 and bad rumors - T.Han 10:46:48 01/26/06 (1)
    • That's rediculous - Michael Oswald 14:31:10 01/27/06 (0)
• 75 530i value? - Gary Schisler 06:21:23 01/26/06 (14)
  • 1975 is the best year, therefore priceless - Velocewest 20:38:10 01/29/06 (0)
  • Being it's a 1975, . . . - John in Simi Valley 00:37:07 01/27/06 (1)
    • Re: Being it's a 1975, . . . - Gary Schisler 04:59:04 01/27/06 (0)
  • Just paid $500. For that, I received a VERY - Lars Olbimmerguy 14:08:57 01/26/06 (4)
    • But its a 79.......... - Misha 19:51:19 01/26/06 (2)
      • Re: But its a 79.......... - Gary Schisler 20:30:09 01/26/06 (1)
        • Yeah.. I had THOUSANDS invested in marriage - Lars OBG 13:19:07 01/27/06 (0)
    • Re: Just paid $500. For that, I received a VERY - Gary Schisler 14:54:04 01/26/06 (0)
  • Re: 75 530i value? - jim H 08:19:11 01/26/06 (5)
    • I bought 530i for 175.00 - Michael Oswald 10:39:25 01/28/06 (0)
    • Re: 75 530i value? - Gary Schisler 08:38:59 01/26/06 (3)
      • Re: 75 530i value? - jim H 09:24:38 01/26/06 (2)
        • My first E12 was a free 80 528i - Craig in Davis 14:23:54 01/26/06 (1)
          • Doh, screwed up the link. Here is the link pics - Craig in Davis 14:28:16 01/26/06 (0)
• Proper O-ring Sizing for Heater Control Valve?? - Jeff R 21:17:24 01/25/06 (3)
  • 17.12 ? RealOEM - Carl 09:26:28 01/27/06 (2)
    • Thanks for the diagram, but... - Jeff R 16:13:10 01/27/06 (1)
      • Re: Thanks for the diagram, but... - Carl 09:30:01 01/28/06 (0)
• Basketweave 14x6.5's - Robert Knowlton 18:58:08 01/25/06 (13)
  • Er, spider wheels, methinks - Remy Davison 06:24:22 01/26/06 (2)
    • Re: Er, spider wheels, methinks - Robert Knowlton 08:38:14 01/26/06 (1)
      • Re: Er, spider wheels, methinks - D. 23:11:01 02/09/06 (0)
  • Might have them. You got mail! (nt) - Dale 05:34:22 01/26/06 (0)
  • ha ha ha... - Eric Q 01:09:38 01/26/06 (3)
    • recondition wheels - Gary Schisler 07:35:38 01/26/06 (2)
      • Re: recondition wheels - jim@dashop 10:47:13 01/26/06 (1)
        • thanks - Gary Schisler 10:58:30 01/26/06 (0)
  • The wheels available in the late 70's that I had - Lars Olbimmerguy 22:32:36 01/25/06 (3)
    • like these? - Adam Wilson in Chicago 06:33:51 01/26/06 (2)
      • Re: like these? - Robert Knowlton 17:44:20 01/26/06 (0)
      • And they look great on my Fjord Blue 633 - Sam Adams 15:25:58 01/26/06 (0)
  • Re: Basketweave 14x6.5's - T.Han 21:20:30 01/25/06 (0)
• Advice for looking at a 75 530i - Gary Schisler 14:46:23 01/25/06 (11)
  • Focus on body. Mechanicals are easier to sort out - Misha 22:12:02 01/25/06 (4)
    • Re: Focus on body. Mechanicals are easier to sort out - Gary Schisler 06:23:24 01/26/06 (3)
      • tail lights, rear fuel door, different hood (nt) - Adam Wilson in Chicago 07:19:24 01/26/06 (2)
        • And some other items..... - Misha 10:51:08 01/26/06 (1)
          • Re: And some other items..... - Gary Schisler 20:06:10 01/27/06 (0)
  • Re: Advice for looking at a 75 530i - Gary 20:28:23 01/25/06 (0)
  • Re: Advice for looking at a 75 530i - Eric Q 18:03:29 01/25/06 (1)
    • Compressor is OK, but - Mike W. 18:53:53 01/25/06 (0)
  • Re: Advice for looking at a 75 530i - Mike W. 17:44:57 01/25/06 (0)
  • Re: Advice for looking at a 75 530i - Mike E 15:05:16 01/25/06 (1)
    • Emphasis on rust - Carl 15:28:37 01/25/06 (0)
• restoring euro bumpers - Micah 12:57:55 01/25/06 (1)
  • Re: restoring euro bumpers - Kevin 06:30:10 01/27/06 (0)
• ebay Motorsport stripe kit for E12 (my auction) - Adam Wilson in Chicago 12:55:27 01/25/06 (0)
• Engine Dying - Puzzler - Larry Mills 06:43:47 01/25/06 (6)
  • Combo Relay - Had EXACT Same Problem - Gavin Gray 11:08:43 01/26/06 (0)
  • My guess - combo relay - Remy Davison 06:33:04 01/26/06 (1)
    • Re: My guess - combo relay - Larry Mills 07:38:42 01/26/06 (0)
  • Some other things to check..... - Big Dog 11:03:09 01/25/06 (0)
  • Re: Engine Dying - Puzzler - Daniel H 11:00:09 01/25/06 (1)
    • Replace pump fuse - Anthony in San Rafael 12:49:31 01/25/06 (0)
• Anybody have 79-81euro635 parts In the los angeles - The one 23:33:37 01/24/06 (3)
  • Re: Anybody have 79-81euro635 parts In the los angeles - The one 18:49:13 01/25/06 (0)
  • Re: Anybody have 79-81euro635 parts In the los angeles - Eric Q 18:05:13 01/25/06 (0)
  • Specifically, what parts are you looking for? - John in Simi Valley 07:18:46 01/25/06 (0)
• 79 e12 528 in Wash - I5 wrecking - Laguna30 19:41:17 01/24/06 (0)
• opinions wanted, slightly OT - Daniel H 18:00:17 01/24/06 (9)
  • Define quality (plenty more) - Mike W. 19:12:27 01/25/06 (0)
  • Quality is improving across the board - Pierre 15:35:24 01/25/06 (0)
  • To many gizmos - peter mooney 15:14:49 01/25/06 (0)
  • Re: opinions wanted, slightly OT - Jim 07:39:45 01/25/06 (0)
  • Not just BMW...(little long) - Mike in Lancaster 05:34:57 01/25/06 (1)
    • Beautiful. Well said. (nt) - Dale 15:38:05 01/25/06 (0)
  • Re: opinions wanted, slightly OT - Brian in Calgary 19:21:31 01/24/06 (0)
  • One other reason, politics.... - Big Dog 19:08:40 01/24/06 (0)
  • Re: opinions wanted, slightly OT - Tom (NC) 18:37:00 01/24/06 (0)
• ITALVOLANTI STEERING WHEEL - Michael R from Melbourne 14:42:42 01/24/06 (0)
• O.T. - Turbo and rpms - Brian in Calgary 11:25:43 01/24/06 (1)
  • wastegate or blow off valve issue - peter mooney 15:16:35 01/25/06 (0)
• Paging: Adam or Velocewest More Tire-Wheel Q's - Misha 08:48:27 01/24/06 (4)
  • You should not have an issue......... - Eddie in TO 14:48:46 01/24/06 (0)
  • I think you will have similar concerns to mine - Adam Wilson in Chicago 09:19:18 01/24/06 (1)
    • Adam is right about the tires have a profound - Big Dog 09:59:27 01/24/06 (0)
  • An e12 can run 245's all the way around IF... - Big Dog 09:15:26 01/24/06 (0)
• 'just wondering' question - KenB 00:52:14 01/24/06 (4)
  • Reason Not To..... - Lars Olbimmerguy 22:03:05 01/24/06 (0)
  • About 3.3 - Mike W. 17:30:16 01/24/06 (1)
    • Re: About 3.3 - KenB 20:07:50 01/24/06 (0)
  • Re: 'just wondering' question - Patrick McHugh 11:21:14 01/24/06 (0)
• Looking for adhesive recommendation - Jeff R 20:03:36 01/23/06 (1)
  • Re: Looking for adhesive recommendation - Mike W. 21:52:29 01/23/06 (0)
• E28 M5 for sale in So Cal, $1K - Gordon 19:32:44 01/23/06 (7)
  • Re: E28 M5 for sale in So Cal, $1K - Tito 22:20:46 01/23/06 (0)
  • Re: E28 M5 for sale in So Cal, $1K - RonP 20:09:53 01/23/06 (5)
    • ron bought it.................. - jim@dashop 18:47:41 01/24/06 (4)
      • Re: ron bought it.................. - Gordon 15:10:56 01/25/06 (3)
        • Re: ron bought it.................. - RonP 17:26:47 01/26/06 (1)
          • Re: ron bought it.................. - Gordon 19:45:38 01/26/06 (0)
        • heres a link from the e28 board - jim@dashop 17:21:40 01/25/06 (0)
• ISO air flow meter - Art in CA 17:24:55 01/23/06 (7)
  • Re: ISO air flow meter - Jokelumina 12:06:00 01/25/06 (0)
  • Re: ISO air flow meter - jim@dashop 18:38:26 01/24/06 (0)
  • Re: ISO air flow meter - Jokelumina 11:26:50 01/24/06 (0)
  • what #'s and try eurodepot - papajimmm nh no bmw's 09:53:40 01/24/06 (1)
    • also try car-part - papajimmm nh no bmw's 09:57:24 01/24/06 (0)
  • What fits - Mike W. 21:40:16 01/23/06 (1)
    • Re: What fits - Art in CA 03:09:58 01/24/06 (0)
• FS: 3.64 differential - Shawn 16:59:28 01/23/06 (0)
• manual window cranks - Drewski 15:30:26 01/23/06 (0)
• Larger throttle body? - Tim from Aus (ACT) 15:00:13 01/23/06 (0)
• Broken Thermo Valve - Neck Smith 12:42:01 01/23/06 (1)
  • Re: Broken Thermo Valve - Mike W. 21:42:07 01/23/06 (0)
• Slightly OT (hey, it's still about the big six) - Big Dog 08:55:14 01/23/06 (1)
  • Just sold me e34 535i with 299xxx miles on it - Craig in Davis 09:32:36 01/23/06 (0)
• Blinker Not Blinking.... - Dan Lafley 07:46:43 01/23/06 (2)
  • Keep Old Switch- Get rid of the spring. - Jaime Obando 11:17:26 01/23/06 (1)
    • Re: Keep Old Switch- Get rid of the spring. - T.Han 12:59:20 01/23/06 (0)
• Cutting Bav. Mani. Gaskets to Fit the Newly Ported - John 04:20:26 01/23/06 (2)
  • Bang for Buck? - Anthony in San Rafael 08:42:49 01/23/06 (0)
  • Pic of the Porting.. - John 05:25:45 01/23/06 (0)
• Nissan Fuel injectors in a bmw? - BangkokMike 23:48:37 01/22/06 (3)
  • If they're Bosch they might be a fit - Velocewest 20:48:55 01/29/06 (0)
  • Re: Nissan Fuel injectors in a bmw? - T.Han 13:04:08 01/23/06 (0)
  • Re: Nissan Fuel injectors in a bmw? - NC Doug 05:59:26 01/23/06 (0)
• Flywheel - JoshInAtl 17:56:32 01/22/06 (5)
  • Try Jim Rowe at Metric Mechanic. He makes a nice - Pierre D 05:41:44 01/23/06 (0)
  • I've got one - Mike W. 18:35:16 01/22/06 (3)
    • Scratch that - Mike W. 19:14:54 01/22/06 (2)
      • Re: Scratch that - JoshInAtl 19:46:14 01/22/06 (1)
        • I have one if necessary - Misha 09:28:53 01/23/06 (0)
• Help! Anyone disassembled a 265/5 dogleg tranny? - Dave Rutkowski 11:13:41 01/22/06 (4)
  • Re: Help! Anyone disassembled a 265/5 dogleg tranny? - Peter Florance 10:59:01 01/23/06 (1)
    • Re: Help! Anyone disassembled a 265/5 dogleg tranny? - Dave Rutkowski 12:16:59 01/23/06 (0)
  • Re: Help! Anyone disassembled a 265/5 dogleg tranny? - Mitch in H.B. 08:15:29 01/23/06 (0)
  • Re: Help! Anyone disassembled a 265/5 dogleg tran - colinwhyte 12:38:26 01/22/06 (0)
• Pictures of my new BBS wheels - Adam Wilson in Chicago 06:22:58 01/22/06 (20)
  • do you have a pic of wheels on the car???? - craig day 11:53:16 01/28/06 (0)
  • I guess you're getting ready for 5iver fest! - Luke 15:55:25 01/25/06 (0)
  • Soooo nice.... I'll trade ya.. - Brian in Calgary 21:45:42 01/23/06 (0)
  • I think I've just been in heaven.... - Eddie in TO 12:26:01 01/23/06 (2)
    • now THAT would look great (gold on your car) - Adam Wilson in Chicago 12:33:18 01/23/06 (1)
      • ohhhhh...great! I thought I was done with my love - Eddie in TO 14:32:07 01/23/06 (0)
  • *Drool* (nt) - Tim from Aus (ACT) 21:47:20 01/22/06 (0)
  • I'm an E12 Purist - Tom (NC) 17:56:29 01/22/06 (6)
    • actually... - Ryan Bryan 08:56:28 01/23/06 (0)
    • interesting, so am I - Adam Wilson in Chicago 19:54:28 01/22/06 (4)
      • Don't sweat it..... - Al Canuck 00:18:40 01/24/06 (0)
      • Re: interesting, so am I - Tom (NC) 05:14:26 01/23/06 (0)
      • They're a period correct upgrade... - Mike E 23:37:25 01/22/06 (1)
        • Very cool Adam, love BBS. I have a set myself.... - M. Keehn 07:37:10 01/23/06 (0)
  • Very, very nice NT. - Misha 10:11:32 01/22/06 (0)
  • Re: Pictures of my new BBS wheels - TCD 07:19:21 01/22/06 (4)
    • thanks - Adam Wilson in Chicago 08:06:19 01/22/06 (3)
      • Are these the wheels you refer to Adam? - Michael R from Melbourne 14:47:19 01/22/06 (2)
        • He was refering to these. - TCD 16:46:39 01/22/06 (0)
        • Sorry - link to photo may not have worked. - Michael R from Melbourne 14:50:45 01/22/06 (0)
• Poem - T.Han 21:29:35 01/21/06 (2)
  • Poem # 2 - Carl-Seattle 10:06:12 01/22/06 (1)
    • Re: Poem # 2 - Tom (NC) 17:59:13 01/22/06 (0)
• Saturday "fun", discoveries... - Michael from LA 20:32:08 01/21/06 (2)
  • Have you tried Victorville - Eric Q 16:54:22 01/22/06 (0)
  • You should have paid a visit - Mike W. 22:06:18 01/21/06 (0)
• Ready for valve Adjustment - Neck Smith 20:24:55 01/21/06 (1)
  • I was just there - Anthony in San Rafael 10:34:21 01/22/06 (0)
• Iridium Spark Plugs - NGK Final Thought - JAIME OBANDO 20:19:00 01/21/06 (0)
• 80 528i automatic FS or trade for laptop plus cash - Gordon 13:05:34 01/21/06 (1)
  • Re: 80 528i automatic FS or trade for laptop plus cash - Eric Q 13:19:41 01/21/06 (0)
• E24 parts for my e12? - Martin 11:47:34 01/21/06 (1)
  • re: E24 parts for my e12? Lucky you - Remy Davison 03:47:04 01/22/06 (0)
• Best choice for floor mats?? - Pierre D 10:56:05 01/21/06 (3)
  • Re: Best choice for floor mats?? - T.Hanson 16:53:09 01/21/06 (2)
    • Thanks. I thought they were too large. - Pierre D 05:36:51 01/23/06 (1)
      • Re: Thanks. I thought they were too large. - T.Han 13:12:04 01/23/06 (0)
• Auto Tranny Fluid - John in NH 08:51:03 01/21/06 (1)
  • Re: Auto Tranny Fluid - John in NH 12:24:31 01/21/06 (0)
• O-rings for the heater core question? - Jeff R 21:25:36 01/20/06 (5)
  • Re: O-rings for the heater core question? - Mike W. 21:44:14 01/20/06 (4)
    • Clarification... - Lenny D. 22:39:25 01/20/06 (3)
      • Accessability of Heater Valve (do they come apart? - Jeff R 01:10:27 01/21/06 (2)
        • I've had them apart - Mike W. 19:18:33 01/21/06 (1)
          • Thanks for the info! nt - Jeff R 00:19:06 01/22/06 (0)
• Need used horns [1981] - Bob Humphrey 21:17:36 01/20/06 (1)
  • Junk Yard ! Mercedes, BMW-Hella's are the best - Jaime Obando 04:26:09 01/21/06 (0)
• Strange power loss issue... - Brian in Calgary 20:37:33 01/20/06 (2)
  • Battery teminals - Mike W. 22:30:37 01/20/06 (1)
    • Be sure and check - - Carl 13:33:57 01/21/06 (0)
• Need pristine e12 for 5er Fest - Peter Florance - First Fives Dictator for Life 19:21:58 01/20/06 (3)
  • Re: Need pristine e12 for 5er Fest - frank faisal 17:39:46 01/21/06 (0)
  • Re: Need pristine e12 for 5er Fest - Eric Q 01:15:26 01/21/06 (0)
  • Just out of curiosity... - Jeff R 20:58:34 01/20/06 (0)
• "Head" case - Reg B 19:12:02 01/20/06 (2)
  • Re: "Head" case - Mike W. 16:32:27 01/21/06 (1)
    • Re: - Reg Burton 20:28:18 02/01/06 (0)
• Arghh we sprung a leak cap’n! - Tim from Aus (ACT) 18:39:51 01/20/06 (3)
  • Good fuel line (more) - Mike W. 21:34:04 01/20/06 (0)
  • Sounds like a cold start valve.. - Brian in Calgary 20:19:24 01/20/06 (1)
    • Re: Sounds like a cold start valve.. - Tim from Aus (ACT) 20:29:40 01/20/06 (0)
• N G K spark plugs ?? - Neck Smith 14:15:35 01/20/06 (4)
  • N G K - Iridium spark plugs - Jaime Obando 18:36:12 01/20/06 (0)
  • Yes - Mike W. 16:39:00 01/20/06 (2)
    • Yes # 2 - Carl 17:27:35 01/20/06 (1)
      • Re: Yes # 3 and a Bigg Butt.... But look out for - Lars Olbimmerguy 18:09:02 01/20/06 (0)
• Uneven Wear on front Tires - Jaime Obando 14:03:13 01/20/06 (1)
  • Re: Uneven Wear on front Tires - T.Hanson 16:35:28 01/20/06 (0)
• A. Wilson to the Graphite Metallic courtesy phone - ChuckNC 05:19:31 01/20/06 (0)
• Car of the Month - Tom (NC) 03:54:45 01/20/06 (3)
  • The Webmaster is in ... - Troy Rudolph (Webmaster) 11:53:26 01/20/06 (2)
    • Re: The Webmaster is in ... - T.Hanson 16:24:17 01/20/06 (0)
    • Re: The Webmaster is in ... - Tom (NC) 15:11:43 01/20/06 (0)
• Melbourne meet - Sat 21st - Michael R from Melbourne 21:32:55 01/19/06 (0)
• 520i intake runners same as 320i? - Tim from Aus (ACT) 13:42:01 01/19/06 (2)
  • think so as long as - papajimmm nh NO bmws 22:34:26 01/19/06 (1)
    • kjet 520i is same as kjet 320i M10 - Mike E 23:00:21 01/19/06 (0)
• Anyone Have a 530i cam? - John in Simi Valley 13:40:26 01/19/06 (3)
  • Re: Anyone Have a 530i cam? - Michael Oswald 13:48:35 01/19/06 (2)
    • yep - Patrick McHugh 12:01:23 01/21/06 (1)
      • Patrick, You've Got Mail - John in Simi Valley 21:51:26 01/23/06 (0)
• Electric Supercharger?? - Troy Rudolph 12:29:28 01/19/06 (9)
  • Re: Electric Supercharger?? - Kaveman 19:32:47 01/20/06 (0)
  • Some of the physics - Mike W. 19:11:55 01/19/06 (0)
  • Re: Electric Supercharger?? - Tom Masters 18:52:37 01/19/06 (0)
  • ye cannae change the laws of physics! - Mike E 16:07:59 01/19/06 (0)
  • Mine Went Like H___ for 100 Feet!!!! - Lars Olbimmerguy 13:06:57 01/19/06 (1)
    • I have a candidate for bungee jump - papajimmm nh NO BMW's 14:47:20 01/21/06 (0)
  • got so bad that on UUC email list - Adam Wilson in Chicago 12:41:57 01/19/06 (0)
  • Total scam, this has been discussed before and - Big Dog 12:34:46 01/19/06 (1)
    • As seen on TV - Carl 13:36:32 01/19/06 (0)
• Battery Discharge problem - Don in Tulsa 11:17:04 01/19/06 (6)
  • Re: Battery Discharge problem - colinwhyte 12:41:51 01/22/06 (0)
  • Re: Battery Discharge problem - Craig in Davis 07:07:25 01/20/06 (0)
  • I had the exact same problem.... - Tulsa Dave 11:52:11 01/19/06 (3)
    • I also had the exact same problem.... - Damien in Brisbane 14:21:18 01/19/06 (0)
    • Aftermarket alarm? - Dale 13:08:23 01/19/06 (1)
      • Re: Aftermarket alarm? - Don in Tulsa 13:13:00 01/19/06 (0)
• Maplight rear view mirror... - Bill Hynes 07:51:23 01/19/06 (2)
  • Re: Maplight rear view mirror... - Don Daynes 21:26:40 01/19/06 (0)
  • Go to MyE28.com and search/forum maplight - Carl 13:49:19 01/19/06 (0)
• Differential Oil stain?? Help Hypoid-How- - Jaime Obando 07:36:06 01/19/06 (4)
  • If it's just seeping and you don't have an actual - Big Dog 10:27:52 01/19/06 (2)
    • Re: If it's just seeping and you don't have an actual - D. 03:00:46 01/24/06 (0)
    • Not that I've ever seen - Mike W. 21:01:29 01/19/06 (0)
  • Re: Differential Oil stain?? Help Hypoid-How- - T.Hanson 09:18:45 01/19/06 (0)
• how to tell if it's a 1977? - Micah 23:27:29 01/18/06 (3)
  • Re: how to tell if it's a 1977? - Bangkokmike 22:36:58 01/19/06 (0)
  • Re: how to tell if it's a 1977? - Mike W. 19:19:28 01/19/06 (0)
  • does it have a vin original not a state issued - papajimmm nh NO BMW's 04:37:07 01/19/06 (0)
• Cam question - Michael Oswald 22:03:13 01/18/06 (5)
  • You can, but why? - Mike W. 22:32:41 01/18/06 (4)
    • Re: You can, but why? - Jokelumina 00:10:50 01/19/06 (3)
      • Re: You can, but why? - Mike W. 21:08:17 01/19/06 (2)
        • How do you tell? - Trevor M 18:27:16 01/20/06 (0)
        • thx, Mike (nt) - Jokelumina 12:03:55 01/20/06 (0)
• Custom Paint - Again w/ image! - Chris Itterly 21:32:13 01/18/06 (4)
  • Smaller image - Chris Itterly 21:45:22 01/18/06 (3)
    • Re: Smaller image - Tom Masters 09:05:09 01/19/06 (2)
      • Oh well - Chris Itterly 18:30:41 01/19/06 (1)
        • Re: Oh well - Chris Itterly 18:31:59 01/19/06 (0)
• Still looking for rebuild kit for heater box?? - Jeff R 20:23:16 01/18/06 (1)
  • I've never heard of this item for a BMW - Velocewest 23:21:04 01/18/06 (0)
• Reunited- Head and Block - Anthony in San Rafael 19:35:19 01/18/06 (8)
  • Search the Archives... - Medly 21:56:15 01/18/06 (3)
    • I don't get it, why would you convert it? - Adam Wilson in Chicago 11:08:37 01/19/06 (1)
      • Re: I don't get it, why would you convert it? - Peter Florance 19:42:02 01/19/06 (0)
    • OK, I really, really need to follow up - Velocewest 23:23:35 01/18/06 (0)
  • Try again - Anthony in San Rafael 19:39:31 01/18/06 (1)
    • Re: Try again - Anthony in San Rafael 16:15:04 01/20/06 (0)
  • Did this on the track car and we fabricated a - Big Dog 19:38:10 01/18/06 (1)
    • Re: Did this on the track car and we fabricated a - Anthony in San Rafael 19:41:28 01/18/06 (0)
• thanks for all tips......... - frank faisal 17:47:35 01/18/06 (0)
• Custom Paint - Chris Itterly 15:19:55 01/18/06 (4)
  • Test (nt) - Chris Itterly 21:30:18 01/18/06 (0)
  • Darn - Chris Itterly 15:22:33 01/18/06 (2)
    • Must be linked - Velocewest 16:18:16 01/18/06 (1)
      • Got it, thanks! (nt) - Chris Itterly 21:34:56 01/18/06 (0)
• Excellent straight bootlid FS - Mike E 15:00:30 01/18/06 (0)
• Melbourne Meet, this Sat - Mike E 14:57:51 01/18/06 (2)
  • fine by me - Remy Davison 20:47:45 01/18/06 (1)
    • Re: fine by me too (funny about that) - Michael R from Melbourne 02:41:55 01/19/06 (0)
• shipping from Australiad??? - Micah 13:21:12 01/18/06 (3)
  • They won't work!!! (kidding) - Adam Wilson in Chicago 13:45:13 01/18/06 (1)
    • Re: They won't work!!! (kidding) - Micah 14:04:19 01/18/06 (0)
  • Re: shipping from Australiad??? - Mike E 13:29:10 01/18/06 (0)
• Body Rust HEeelp! - TREVOR 11:26:24 01/18/06 (4)
  • Rust is where you find it. Not intended as sarcasm - Lars Olbimmerguy 20:19:23 01/18/06 (1)
    • Re: Rust is where you find it. Not intended as sar - T.Hanson 06:40:31 01/19/06 (0)
  • Re: Body Rust HEeelp! - T.Hanson 19:45:16 01/18/06 (1)
    • Re: Body Rust HEeelp! - trevor 19:55:55 01/19/06 (0)
• couldn't get $7.99 for a taillight - papajimmm no BMW's 09:20:29 01/18/06 (2)
  • Re: couldn't get $7.99 for a taillight - BangkokMike 22:39:05 01/19/06 (0)
  • Re: couldn't get $7.99 for a taillight - Carl 09:33:52 01/18/06 (0)
• To buy or not to buy... - Tim from Aus (ACT) 00:29:37 01/18/06 (7)
  • Re: To buy or not to buy... - Tim from Aus (ACT) 01:46:02 01/19/06 (0)
  • 520=M10 motor 528i=M30 motor - Pierre 17:06:52 01/18/06 (2)
    • M20 in the 78 520? - Mike E 19:57:47 01/18/06 (1)
      • Its a 4 cyl - Tim from Aus (ACT) 03:57:40 01/19/06 (0)
  • Wont fit. - Aaron from Aus 04:50:52 01/18/06 (2)
    • Damn - Tim from Aus (ACT) 13:05:20 01/18/06 (1)
      • Re: Damn - Remy Davison 20:53:17 01/18/06 (0)
• electrical test results... - KenB 23:01:28 01/17/06 (2)
  • Re: electrical test results... - Peter Florance 04:11:49 01/18/06 (1)
    • Re: electrical test results... - KenB 00:19:16 01/19/06 (0)
• 1980 528I Winshield Wipers - Robert B. 19:24:54 01/17/06 (2)
  • 1979 528I Winshield Wipers - Jaime Obando 19:45:33 01/17/06 (1)
    • there's a relay under the dash that - stewart in slc 23:49:08 01/17/06 (0)
• confused!!!!!!!!! (dream car E12) - frank faisal 19:17:54 01/17/06 (5)
  • Re: confused!!!!!!!!! (dream car E12) - Velocewest 09:44:21 01/18/06 (0)
  • Re: confused!!!!!!!!! (dream car E12) - Mike W. 19:44:10 01/17/06 (3)
    • Re: confused!!!!!!!!! (dream car E12) - T.Hanson 20:38:14 01/17/06 (2)
      • Re: confused!!!!!!!!! (dream car E12) - frank faisal 23:05:10 01/17/06 (1)
        • Re: confused!!!!!!!!! (dream car E12) - T.Hanson 08:14:51 01/18/06 (0)
• Head gasket woes - Bryan Boyce 17:13:58 01/17/06 (12)
  • . . You've got to see the leak in action !! - Neck Smith 08:09:55 01/18/06 (1)
    • I told you!! - Jaime Obando 07:27:32 01/19/06 (0)
  • Probably not head gasket - Lou in Denver 21:53:02 01/17/06 (0)
  • Coolant from the rear of the engine? - Jaime Obando 20:13:35 01/17/06 (0)
  • It could be one of two things..... - Big Dog 18:23:23 01/17/06 (0)
  • Re: Head gasket woes - Mike W. 17:28:02 01/17/06 (6)
    • Head gasket woes update - Bryan Boyce 18:34:27 01/17/06 (5)
      • Re: Head gasket woes update - Mike W. 19:32:10 01/17/06 (0)
      • Easy, fix the e12 and let me know where the e34 - Big Dog 19:27:47 01/17/06 (3)
        • 88 would be an E28 - Mike W. 19:39:15 01/17/06 (2)
          • Fixed it! - Bryan Boyce 23:36:21 01/18/06 (1)
            • Did you bleed the coolant? (nt) - Adam Wilson in Chicago 05:43:12 01/19/06 (0)
• Brake Booster - ChuckNC 14:49:40 01/17/06 (3)
  • Keep trying the bleeding and if no luck - Carl 12:34:02 01/18/06 (0)
  • Re: Brake Booster - Sam Schultz 15:48:00 01/17/06 (1)
    • I agree - Daniel H 18:51:02 01/17/06 (0)
• Tire size (just curious) - Kim Rosing-Asvid 12:20:16 01/17/06 (7)
  • It is in Oregon - Velocewest 13:26:33 01/17/06 (1)
    • Re: It is in Oregon - Dusty Rhodes 01:47:58 01/19/06 (0)
  • Whatever you can fit under there buddy :-) - Andrew 13:24:31 01/17/06 (4)
    • I find it hard to believe - Adam Wilson in Chicago 08:26:04 01/18/06 (3)
      • You guys did note that Kim said "diameter" - Velocewest 10:52:13 01/18/06 (1)
        • oops my mistake then, answer change - Adam Wilson in Chicago 12:18:22 01/18/06 (0)
      • Re: I find it hard to believe - Kim Rosing-Asvid 10:01:17 01/18/06 (0)
• Rear Interior Door Panel Removal 78 530i ?? - Jeff R 06:34:04 01/17/06 (3)
  • Re: Rear Interior Door Panel Removal 78 530i ?? - Brian in Calgary 08:41:52 01/17/06 (2)
    • Pics are on the Interior dyeing FAQ - Michael R from Melbourne 15:21:26 01/17/06 (0)
    • Thank You for the very detailed information! - Jeff R 12:14:23 01/17/06 (0)
• ALERT! Ebay, Korman triple carb setup - Adam Wilson in Chicago 06:32:59 01/17/06 (4)
  • Oh why did you have to post that... - Justin in C'ville 06:54:26 01/17/06 (3)
    • Waaaaay cool. 25-30 years ago - Mike W. 21:37:11 01/17/06 (1)
      • Re: Waaaaay cool. 25-30 years ago - Velocewest 11:00:01 01/18/06 (0)
    • Down boy, down - Michael P, C'ville (visiting) 11:51:37 01/17/06 (0)
• Gotta say goodbye to my 1980 528i. - NC Doug 05:28:38 01/17/06 (2)
  • NOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!! - chuckNC 14:46:19 01/17/06 (1)
    • You will be back, they always come back - Sam Schultz 15:49:54 01/17/06 (0)
• Very clean 528 (carb'd) spotted in Melbourne - Mike E 03:22:45 01/17/06 (0)
• Headlight Washers on Ebay...... - Tom Masters 23:07:33 01/16/06 (0)
• TDC on head - anthony in San Rafael 20:04:22 01/16/06 (2)
  • Re: TDC on head - Craig in Davis 22:02:16 01/16/06 (0)
  • Lots and lots of great info... - Don Daynes 22:00:01 01/16/06 (0)
• Ive just adjusted the Air Flow Meter with an allen - Jaime Obando 19:59:17 01/16/06 (1)
  • Re: Ive just adjusted the Air Flow Meter with an allen - BangkokMike 21:46:55 01/16/06 (0)
• Jim Hineline - Bro 19:20:01 01/16/06 (1)
  • Hey! email me! - Jim Hineline 01:37:18 01/18/06 (0)
• Ignition timing. - swingbozo 18:06:58 01/16/06 (3)
  • Ball on the pointer is 22 btdc - Velocewest 23:46:59 01/16/06 (1)
    • 22 btdc at 1700, vacuum blocked non cali = pin - swingbozo 11:34:55 01/17/06 (0)
  • I also have one of these - swingbozo 18:37:47 01/16/06 (0)
• Door brakes - swingbozo 18:04:19 01/16/06 (2)
  • Re: Door brakes - jokelumina 12:38:44 01/17/06 (1)
    • Thanks! - swingbozo 10:59:25 01/18/06 (0)
• Heater Box Rebuild Kit (or) Foam Insulation supply - Jeff R 17:21:26 01/16/06 (0)
• Heater Box Rebuild Kit (or) Foam Insulation supply - Jeff R 17:14:35 01/16/06 (1)
  • Re: Heater Box Rebuild Kit (or) Foam Insulation supply - Kim Rosing-Asvid 12:03:12 01/17/06 (0)
• H1 low beam wiring - Velocewest 14:22:34 01/16/06 (0)
• Beefy - Velocewest 14:09:19 01/16/06 (11)
  • Question - Misha 20:18:56 01/16/06 (7)
    • time to weigh in on this discussion (long) - Adam Wilson in Chicago 11:02:22 01/17/06 (3)
      • Re: time to weigh in on this discussion (long) - Velocewest 13:49:15 01/17/06 (2)
        • more info - Adam Wilson in Chicago 05:51:56 01/18/06 (0)
        • Tony - no more pictures - it's too hard on me. - Wietse (quietly weeping in my empty garage) 17:33:37 01/17/06 (0)
    • Question for Misha.. more.. - Andrew 07:33:02 01/17/06 (0)
    • Re: Question - Eddie in TO 05:52:12 01/17/06 (0)
    • Re: Question - Velocewest 00:00:13 01/17/06 (0)
  • Re: Beefy - jim 17:28:27 01/16/06 (0)
  • Looks goooooooooooooood - Eddie in TO 14:27:51 01/16/06 (0)
  • Doh! 17" - Velocewest 14:10:42 01/16/06 (0)
• Heater Core -- IMPORTANT - Jeff R 09:34:05 01/16/06 (3)
  • If you are that far in AND if you replace the core - Lars OBG 14:08:16 01/16/06 (0)
  • IMHO Replace - Misha 10:20:16 01/16/06 (0)
  • If it's not leaking... - Velocewest 09:39:48 01/16/06 (0)
• Meet in Illinois - Jokelumina 07:39:35 01/16/06 (0)
• Drove 1 week with too much oil on the engine - Neck Smith 07:26:03 01/16/06 (5)
  • Worse case...... - Matt C 20:18:43 01/16/06 (0)
  • Drove 1 week with too much oil INSIDE the engine ! - Neck Smith 19:54:15 01/16/06 (0)
  • Re: Drove 1 week with too much oil on the engine - T.Han 09:53:59 01/16/06 (0)
  • Re: Drove 1 week with too much oil on the engine - Velocewest 09:42:06 01/16/06 (0)
  • Re: Drove 1 week with too much oil on the engine - Carl 08:38:53 01/16/06 (0)
• N E 1 translate ukrainian ? - papajimmm nh 06:21:23 01/16/06 (2)
  • No, but - Mike W. 21:27:14 01/17/06 (0)
  • Ukrainian not a Babelfish option, but - Velocewest 09:36:59 01/16/06 (0)
• Link to a cool dealer - Kim Rosing-Asvid 05:36:15 01/16/06 (1)
  • Forgot to mention: - Kim Rosing-Asvid 05:38:59 01/16/06 (0)
• Chrome trim removal tools - Eric Hampton 02:28:58 01/16/06 (1)
  • Re: Chrome trim removal tools - T.Hanson 09:51:54 01/16/06 (0)
• European bumpers - Bernardo 00:16:33 01/16/06 (1)
  • Re: European bumpers - Velocewest 09:43:39 01/16/06 (0)
• 77 530i Owners Manual - Dan Lafley 19:52:22 01/15/06 (0)
• erratic Idle - after new plugs were replaced ? ?? - Jaime Obando 18:51:40 01/15/06 (5)
  • what type of plugs... - eric in denver 21:15:54 01/15/06 (4)
    • Super Bosch Coper WR9DC Made in Brazil ? - Jaime Obando 06:51:19 01/16/06 (3)
      • Re: Super Bosch Coper WR9DC Made in Brazil ? - Velocewest 09:45:15 01/16/06 (2)
        • Yes Sir-Shopping for WIRE$ HELP! Thank you TONY!! - Jaime Obando 19:52:24 01/16/06 (1)
          • Re: Yes Sir-Shopping for WIRE$ HELP! Thank you TONY!! - Peter Florance 08:08:29 01/17/06 (0)
• E-12 shop manual - Nicholas Korn 18:28:10 01/15/06 (0)
• 77 530i for sale, $125 - Gordon 16:52:59 01/15/06 (0)
• 78 530i Head and Conversion to Lambda - Jeff R 02:07:20 01/15/06 (2)
  • Re: 78 530i Head and Conversion to Lambda - Peter Florance 05:47:51 01/15/06 (1)
    • Re: 78 530i Head and Conversion to Lambda - Mike W. 12:27:45 01/15/06 (0)
• just picked up a 1980 E12 BMW 528i - Keith 01:04:50 01/15/06 (6)
  • Re: just picked up a 1980 E12 BMW 528i - Clay? - Larry Mills 13:18:35 01/15/06 (2)
    • Clay? - Keith 21:23:05 01/15/06 (1)
      • Good info, and - Mike W. 22:19:49 01/15/06 (0)
  • Re: just picked up a 1980 E12 BMW 528i - T.Hanson 06:47:26 01/15/06 (2)
    • Re: just picked up a 1980 E12 BMW 528i - Keith 21:13:37 01/15/06 (1)
      • First five owners in So Cali - Jokelumina 07:31:05 01/16/06 (0)
• Finally got my Euro 3.5! - Josh in Atl 20:12:49 01/14/06 (5)
  • Re: Finally got my Euro 3.5! - Jamie Seattle 18:04:32 01/15/06 (1)
    • Re: Finally got my Euro 3.5! - ian 16:21:35 01/26/06 (0)
  • start reading on my website - Adam Wilson in Chicago 09:17:04 01/15/06 (0)
  • Also... - Remy Davison 06:12:47 01/15/06 (0)
  • Depends on the year - Mike W. 21:42:22 01/14/06 (0)
• Volvo Air Dam Question.... - Dan Lafley 17:47:05 01/14/06 (4)
  • Link - Mike E 14:49:15 01/15/06 (0)
  • Michael R has done it - Mike E 03:44:15 01/15/06 (2)
    • Re: Michael R has done it - Dan Lafley 12:30:40 01/15/06 (1)
      • Re: Michael R has done it - Michael R from Melbourne 15:23:20 01/15/06 (0)
• Restuffing seats - Craig in Davis 15:35:35 01/14/06 (1)
  • Re: Restuffing seats - T.Hanson 16:49:55 01/14/06 (0)
• Looking for ALL info on E12 M535i - Ronald 07:46:10 01/14/06 (2)
  • Adam Wilson's site may be of some help to you! - Bob/E12/6er 12:02:48 01/16/06 (0)
  • Congratulations on your fine acquisition (nt) - Trevor M 08:04:05 01/14/06 (0)
• Temp Gauge - Dan Lafley 01:15:35 01/14/06 (7)
  • Re: Temp Gauge - Karl in KS 19:32:17 01/15/06 (0)
  • You need another ground - Mike w. 21:51:24 01/14/06 (0)
  • replaced battery ground worked - Art in CA 12:32:21 01/14/06 (2)
    • Just did.... - Dan Lafley 17:40:28 01/14/06 (1)
      • Air in system will not cause the erratic gauge - Pierre 07:39:25 01/15/06 (0)
  • It's most often a bad ground - Pierre 10:09:20 01/14/06 (0)
  • Same problem on mine...don't know? - Jeff R 09:24:11 01/14/06 (0)
• OT..I'm looking for early oilhead GS for sale? - eric in denver 18:54:20 01/13/06 (2)
  • Have you looked at IBMWR Marketplace?? - Lars Olbimmerguy 23:10:15 01/13/06 (1)
    • I check that one every day... - Eric in denver 09:29:05 01/15/06 (0)
• Sun Engine Analyzer (Gas Analyzer) - Jeff R 08:44:07 01/13/06 (6)
  • Re: Sun Engine Analyzer (Gas Analyzer) - Jokelumina 11:23:56 01/16/06 (0)
  • Location, location, location - Mike W. 17:03:04 01/13/06 (4)
    • Re: Location, location, location - Jeff R 18:42:49 01/13/06 (3)
      • I posted it... - Mike W. 21:45:27 01/14/06 (2)
        • Thanks for the effort...something will turn up. nt - Jeff R 01:57:00 01/15/06 (1)
          • what is your location...Id be happy to store it - eric in denver 21:18:02 01/15/06 (0)
• Car of the month??? - Micah 22:39:33 01/12/06 (3)
  • Re: Car of the month??? - Tom (NC) 04:53:26 01/13/06 (2)
    • Re: Car of the month??? - Dan Lafley 01:09:39 01/14/06 (1)
      • email to Troy (nt) - Veloicewest 09:47:05 01/16/06 (0)
• Looking for 195/70-14 tires - Jeff R 22:33:17 01/12/06 (3)
  • Re: Looking for 195/70-14 tires - Eric Q 16:30:25 01/13/06 (2)
    • Re: Looking for 195/70-14 tires - Jeff R 18:49:25 01/13/06 (1)
      • Re: Looking for 195/70-14 tires - Eric Q 15:33:05 01/14/06 (0)
• Anyone every use Seafoam? - Brian in Calgary 19:51:54 01/12/06 (6)
  • I once heard an old mechanic refer to the water - Big Dog 13:57:06 01/13/06 (0)
  • Re: Anyone every use Seafoam? - Jim Hineline 12:44:50 01/13/06 (0)
  • A chemical takeoff on the age old Can-O-Water - Lars Olbimmerguy 08:28:12 01/13/06 (0)
  • Re: Anyone every use Seafoam? - Tom (NC) 04:54:27 01/13/06 (0)
  • i have - greghill-phx,az (la,ca) 23:08:11 01/12/06 (1)
    • Me too - but I don't - - Carl-Seatte 08:38:19 01/13/06 (0)
• Stuttering at low rpm under load - Michael in LA 17:28:55 01/12/06 (3)
  • Re: Stuttering at low rpm under load - Michael in LA 17:44:17 01/12/06 (2)
    • Re: Stuttering at low rpm under load - greghill-phx,az (la,ca) 23:19:01 01/12/06 (1)
      • Re: Stuttering at low rpm under load - Michael in LA 17:45:39 01/13/06 (0)
• Hey Lars, is it raining ? - T.Hanson 16:20:16 01/12/06 (4)
  • Well, yeees, and unusually so.... - Lars Olbimmerguy 08:37:04 01/13/06 (3)
    • Re: Well, yeees, and unusually so.... - T.Hanson 19:59:12 01/13/06 (0)
    • Entertaining - Adam Wilson in Chicago 15:09:29 01/13/06 (1)
      • Actually, I just finished a batch.... - Lars Olbimmerguy 23:16:36 01/13/06 (0)
• Melbourne meet - Sat 21st - Michael R from Melbourne 13:58:27 01/12/06 (4)
  • Where what time...Always interested in meeting up - Aaron from Aus 20:10:42 01/14/06 (0)
  • Re: Melbourne meet - Sat 21st - Mike E 15:47:20 01/12/06 (2)
    • Re: Melbourne meet - Sat 21st - Michael R from Melbourne 18:03:27 01/12/06 (1)
      • Re: Melbourne meet - Sat 21st - Remy Davison 18:13:16 01/12/06 (0)
• stock 14x6 turbine wheel weight? - Andrew in Chicago 13:37:29 01/12/06 (10)
  • I have a bare, stock 14" turbine wheel here but - Trevor M 11:03:09 01/13/06 (3)
    • Stand on a scale with it in your hand :-) - Andrew 11:11:32 01/13/06 (2)
      • As far as I can tell... - Trevor M 11:44:23 01/13/06 (1)
        • Very interesting. - Andrew 11:52:07 01/13/06 (0)
  • Very HEAVY! More... - Jeff Olson 05:48:49 01/13/06 (5)
    • Its funny cause i almost emailed you last night... - Andrew in Chicago 06:26:11 01/13/06 (4)
      • 18.5 lb for a 16 is very respectable (nt) - Velocewest 10:16:36 01/13/06 (3)
        • Thats based on what i read on an ebayauction..more - Andrew 10:56:32 01/13/06 (2)
          • I can do that - Velocewest 15:42:38 01/13/06 (1)
            • but what offset - papajimmm nh no bmw's 21:31:28 01/14/06 (0)
• Correct spark plug GAP needed 1979 0.24? - Jaime Obando 09:40:07 01/12/06 (8)
  • Re: Correct spark plug GAP needed 1979 0.24? - Trevor M 13:21:54 01/12/06 (0)
  • No problem just use one MSD ignition system per - Big Dog 13:02:22 01/12/06 (2)
    • Re: No problem just use one MSD ignition system per - Where can you get an MSD Ignition System 13:13:31 01/12/06 (1)
      • I was being faceitious, but it is a great ignition - Big Dog 07:21:52 01/13/06 (0)
  • Umm. That's .024 inches (eom) - Troy Rudolph 12:04:04 01/12/06 (3)
    • True... You need one heck of a coil for the spark - Lars 12:14:00 01/12/06 (2)
      • So how do you set the correct GAP on plugs? - Neck Smith 12:32:54 01/12/06 (1)
        • Re: So how do you set the correct GAP on plugs? - T.Hanson 16:18:07 01/12/06 (0)
• Artisan/paint - T.Hanson 08:00:34 01/12/06 (6)
  • On my best paint jobs, made about $3 per hour - Lars Olbimmerguy 12:10:57 01/12/06 (4)
    • But remember. Minimum wage was $2.54 per hour. - Lars OBG 12:11:39 01/12/06 (3)
      • Did they have minimum wage back then? - Adam Wilson in Chicago 12:14:41 01/12/06 (2)
        • Actually, the wheel had not been invented, but - Lars OBG 18:43:18 01/12/06 (0)
        • wow am I one of the younger ones in the bunch - Kevin 12:49:44 01/12/06 (0)
  • Re: Artisan/paint - Kevin 11:40:38 01/12/06 (0)
• Injectors Wanted - BangkokMike 00:24:05 01/12/06 (5)
  • Re: Injectors Wanted - Peter Florance 04:05:33 01/12/06 (4)
    • Re: Injectors Wanted - BangkokMike 21:19:33 01/12/06 (0)
    • Re: Injectors Wanted - jim@dashop 15:37:43 01/12/06 (2)
      • Re: Injectors Wanted - BangkokMike 21:16:31 01/12/06 (1)
        • Re: Injectors Wanted - jim@dashop 09:10:46 01/13/06 (0)
• Photos of my car - Jokelumina 18:05:05 01/11/06 (0)
• Remy - Good 528i for Sale in Ballarat VICTORIA - Michael R from Melbourne 16:36:45 01/11/06 (3)
  • Another one? - Remy Davison 05:34:09 01/12/06 (2)
    • Na - for your friend that drove your e12. - Michael R from Melbourne 13:53:51 01/12/06 (1)
      • Ah, I get it.. - Remy Davison 18:15:33 01/12/06 (0)
• RE: LA/OC/SD Old school BMW meet, Jan 15th - AllynS 15:06:27 01/11/06 (5)
  • Re: RE: LA/OC/SD Old school BMW meet, Jan 15th - Don Daynes 18:04:41 01/11/06 (4)
    • You can drive my E12 if you want... - Eric Q 00:17:32 01/12/06 (3)
      • Re:My sierra Beige E12 - Jimh 09:00:25 01/12/06 (2)
        • We've never gone either. - Eric Q 19:59:17 01/12/06 (1)
          • Re: We've never gone either. - Jim Hilbrant 08:27:45 01/13/06 (0)
• e12 auction - Lou in Denver 14:24:37 01/11/06 (2)
  • Re: e12 auction - Jim 17:35:13 01/11/06 (0)
  • Re: e12 auction - Carl 15:10:32 01/11/06 (0)
• M5 video for your viewing pleasure - Andrew in Chicago 14:19:41 01/11/06 (6)
  • Re: M5 video for your viewing pleasure - Trevor M 15:41:07 01/13/06 (0)
  • 10 days later ... - Wietse 19:36:53 01/11/06 (3)
    • Nah, the camera man was perfectly safe... - Bill Hynes 19:44:42 01/11/06 (2)
      • Your right ....the 2" aluminum pole.... - Wietse 19:55:41 01/11/06 (1)
        • F = MA (nt) - Bill Hynes 09:50:15 01/12/06 (0)
  • WOO HOO!!!!!!! nt - Daniel H 17:18:17 01/11/06 (0)
• Whoohooo, Bav Auto photo contest - Adam Wilson in Chicago 09:27:46 01/11/06 (6)
  • Congratulations Adam!!! eom - Eddie in TO 07:44:23 01/13/06 (0)
  • Congrats.. That's the contest I won last year!!! - Lenny D. 13:40:22 01/11/06 (0)
  • Re: Whoohooo, Bav Auto photo contest - RonP 12:04:42 01/11/06 (0)
  • Awesome, can't wait to see pics....(nt) - Tom Masters 11:57:31 01/11/06 (0)
  • Well it's about time. (jk) Congrats Adam!! (nt) - Brian in Calgary 11:13:55 01/11/06 (0)
  • Congrats Adam! (EOM) - Andrew in Chicago 09:30:52 01/11/06 (0)
• 530i purchase opinions - The Artisan 08:34:25 01/11/06 (21)
  • Re: 530i purchase opinions - Velocewest 09:06:28 01/11/06 (20)
    • Re: 530i purchase opinions - The Artisan 09:39:58 01/11/06 (18)
      • Re: 530i purchase opinions - T.Hanson 20:46:29 01/11/06 (12)
        • Re: 530i purchase opinions - The Artisan 06:25:55 01/12/06 (11)
          • 5er Fest canvas (my response, long) - Adam Wilson in Chicago 07:28:04 01/12/06 (10)
            • Adam forgot I wanted to show you this pics as well - Kevin 15:38:10 01/12/06 (0)
            • Adam forgot I wanted to show you this pics as well - Kevin 15:38:10 01/12/06 (1)
              • not sure why is double posted - Kevin 15:39:47 01/12/06 (0)
            • Re: 5er Fest canvas (my response, long) - Kevin 11:37:53 01/12/06 (3)
              • How do you post multiple pics and wonder why - Kevin 11:50:39 01/12/06 (2)
                • 1. Can't 2. Looks OK to me (nt) - Velocewest 14:02:14 01/12/06 (1)
                  • Ok thanks maybe my monitor was off. - Kevin 14:29:37 01/12/06 (0)
            • Re: 5er Fest canvas (my response, long) - Velocewest 11:37:45 01/12/06 (0)
            • Caravan Manager? - Andrew in Chicago 09:46:31 01/12/06 (1)
              • I plan to follow Steve Haygood............: ^ 0 - Kevin 11:42:26 01/12/06 (0)
      • Re: 530i purchase opinions - Velocewest 09:52:08 01/11/06 (4)
        • Re: 530i purchase opinions - The Artisan 10:08:29 01/11/06 (3)
          • Re: 530i purchase opinions - Velocewest 12:14:55 01/11/06 (2)
            • Re: 530i purchase opinions - The Artisan 12:36:24 01/11/06 (1)
              • Re: 530i purchase opinions - The Artisan 13:07:30 01/11/06 (0)
    • Paint my car too ;-) EOM - Andrew 09:18:27 01/11/06 (0)
• A/C Micro Switch behind Warm/Cold Knob - Jeff R 21:29:00 01/10/06 (2)
  • Just a basic switch - Mike W. 21:35:12 01/10/06 (1)
    • Re: Just a basic switch - Jeff R 21:49:20 01/10/06 (0)
• 83-90 6 Series springs - Glen 20:27:20 01/10/06 (3)
  • Re: 83-90 6 Series springs - rexmo 07:28:40 01/12/06 (0)
  • Re: 83-90 6 Series springs - Glen 22:00:42 01/10/06 (0)
  • Nope - Mike W. 21:36:58 01/10/06 (0)
• Idle Surge - Larry Mills 19:09:53 01/10/06 (1)
  • Re: Idle Surge - Mike W. 20:16:18 01/10/06 (0)
• Three Fuel Filters - Larry Mills 19:05:54 01/10/06 (2)
  • If two is good... - Velocewest 23:19:33 01/10/06 (1)
    • Is'nt the filter inline after the pump and-.. - Carl 13:07:53 01/11/06 (0)
• Why not use e28 P/S pump? - Patrick McHugh 18:35:02 01/10/06 (6)
  • Re: Why not use e28 P/S pump? - Steve Haygood 15:18:24 01/11/06 (0)
  • Thanks, i'll see if i can make it work! - Patrick McHugh 12:36:45 01/11/06 (0)
  • Should work fine (nt) - Velocewest 23:20:34 01/10/06 (3)
    • Hose fittings are different - mikey 23:37:59 01/10/06 (2)
      • I thought of that after I posted - Velocewest 12:15:57 01/11/06 (0)
      • correction - mikey 23:40:31 01/10/06 (0)
• stock front air duct(left) anyone have one? - Andrew in chicago 14:02:12 01/10/06 (0)
• Euro Indicator Lights - Tom Masters 13:47:19 01/10/06 (0)
• half shaft splines - peter mooney 12:35:47 01/10/06 (2)
  • Re: half shaft splines - Peter Florance 14:00:17 01/10/06 (1)
    • Re: half shaft splines - peter mooney 09:09:18 01/11/06 (0)
• Advice on clutch master - Dan J 11:14:25 01/10/06 (8)
  • Thanks - Dan J 15:20:59 01/11/06 (0)
  • Umm..never seen that bottom one.. - Mike in Lancaster 04:25:10 01/11/06 (1)
    • Errr same stroke as original (nt) - Mike in Lancaster 12:36:13 01/11/06 (0)
  • I'd go for the cheaper one - Mike W. 17:20:45 01/10/06 (0)
  • Try here... - Lenny D. 14:09:18 01/10/06 (0)
  • oops, didn't work - Dan J 11:16:37 01/10/06 (2)
    • lots of problems out there with cheaper master cyl - Steve Haygood 15:22:15 01/11/06 (0)
    • Re: oops, didn't work - Carl-Seattle 12:37:33 01/10/06 (0)
• Help, no place to put Sun Exhaust Gas Analyzer! - Jeff R 09:35:42 01/10/06 (0)
• Cam nut removal/ How? - Kevin Gailey 20:55:10 01/09/06 (3)
  • Re: Cam nut removal/ How? - Mike W. 22:00:40 01/09/06 (2)
    • Re: Cam nut removal/ How? - Kevin Gailey 22:09:39 01/09/06 (1)
      • Re: Cam nut removal/ How? - Peter Florance 03:36:03 01/10/06 (0)
• first fives chapter - Karl in KS 19:52:30 01/09/06 (5)
  • What month Roundel issue, and page number? (nt) - Adam Wilson in Chicago 05:28:27 01/10/06 (4)
    • President's Page... - Lenny D. 14:13:13 01/10/06 (3)
      • This month we get to vote - Karl in KS 15:08:40 01/13/06 (0)
      • December issue, Roundel (nt) - Lenny D. 14:13:56 01/10/06 (1)
        • Re: December issue, Roundel (nt) - Peter Florance 05:37:47 01/12/06 (0)
• Looking for blower motor cage fans - Jeff R 19:42:20 01/09/06 (4)
  • Generally speaking you will only find - Velocewest 23:59:33 01/09/06 (0)
  • Re: Looking for blower motor cage fans - Karl in KS 19:49:50 01/09/06 (2)
    • Haven't tested motor yet, but one fan is broken - Jeff R 08:49:08 01/10/06 (0)
    • They work independently.. - Brian in Calgary 22:25:13 01/09/06 (0)
• Been a while... - Mike E 18:01:43 01/09/06 (8)
  • Welcome back, Mike E - Remy Davison 06:56:14 01/10/06 (4)
    • Missed you Mike (sniif) - Michael R from Melbourne 16:31:00 01/11/06 (1)
      • Next Sat fine by me. - Remy Davison 05:36:05 01/12/06 (0)
    • Parts - Mike E 17:31:03 01/10/06 (0)
    • I learnt a hell of a lot... - Mike E 17:12:47 01/10/06 (0)
  • Man find a 535 drivetrain and resurrect it :) nt - Mike in Lancaster 18:06:20 01/09/06 (2)
    • Re: Man find a 535 drivetrain and resurrect it :) nt - Mike E 02:50:17 01/10/06 (1)
      • I can MORE than understand, but... - Mike in Lancaster 04:20:46 01/10/06 (0)
• Gas Tank Repair - It's a good thing (long) - Brian in Calgary 12:28:44 01/09/06 (9)
  • If your tank is rusted - Jeff C 07:40:39 01/10/06 (1)
    • Re: If your tank is rusted - Brian in Calgary 11:29:59 01/10/06 (0)
  • Here is the link to the pics - Brian in Calgary 22:19:29 01/09/06 (0)
  • Here is the link to the pics - Brian in Calgary 22:19:15 01/09/06 (1)
    • Ignore the 2nd of the double post ...d'oh (nt) - Brian in Calgary 22:20:15 01/09/06 (0)
  • when I get enough time ..... - Adam Wilson in Chicago 15:07:34 01/09/06 (1)
    • That is beautiful....(nt) - Mike in Lancaster 15:32:02 01/09/06 (0)
  • Re: Gas Tank Repair - It's a good thing (long) - Jokelumina 14:05:18 01/09/06 (1)
    • Thanks Tom...Link is posted - Brian in Calgary 22:22:50 01/09/06 (0)
• E12 back on the road - Remy Davison 04:36:28 01/09/06 (1)
  • Looks great! Wow, Paul Bracq was a great sytlist!! - Pierre D 09:36:39 01/09/06 (0)
• If not claimed this 3.0 is going to a better place - Patrick McHugh 23:44:07 01/08/06 (2)
  • Re: If not claimed this 3.0 is going to a better place - Larry Mills 05:13:43 01/09/06 (1)
    • Lafayette, IN - Patrick McHugh 11:25:36 01/09/06 (0)
• 77 530i $150 - Jamie Seattle 22:21:47 01/08/06 (0)
• L-Jet Injector Question. - BangkokMike 20:01:16 01/08/06 (2)
  • Re: L-Jet Injector Question. - Peter Florance 03:58:03 01/09/06 (1)
    • Thanks Peter! (nt) - BangkokMike 22:19:16 01/09/06 (0)
• rim fitment - Dave 19:08:42 01/08/06 (8)
  • Actually John..... - Mike in Lancaster 04:50:13 01/09/06 (5)
    • Re: Actually John..... - T.Hanson 11:42:34 01/09/06 (0)
    • Wietse actually had 9x17 on the back - Velocewest 11:07:14 01/09/06 (1)
      • I stand corrected :).... - Mike in Lancaster 15:18:44 01/09/06 (0)
    • more on wide rubber - Adam Wilson in Chicago 05:50:57 01/09/06 (0)
    • WoW bad spelling sorry no coffee yet :P nt - Mike in Lancaster 04:51:49 01/09/06 (0)
  • See Car of the Month - Mark Phillips' 528i - John in Simi Valley 20:38:34 01/08/06 (0)
  • See Car of the Month - Mark Phillips' 528i - John in Simi Valley 20:37:19 01/08/06 (0)
• 81 528i FS, 5 speed, $600 - Gordon 18:51:47 01/08/06 (0)
• Cold Start Fix....THANKS TOM (NC) & CHUCK NC - NC Doug 14:43:54 01/08/06 (2)
  • And if you visit Thailand.. - BangkokMike 19:42:33 01/08/06 (0)
  • Re: Cold Start Fix....THANKS TOM (NC) & CHUCK NC - Tom (NC) 15:27:11 01/08/06 (0)
• Check the Technical FAQ! - Velocewest 12:27:00 01/08/06 (2)
  • Yeah...Peter what happend to the Pertronix FAQ?nt - Mike in Lancaster 15:35:02 01/09/06 (1)
    • huh? - Peter Florance 18:37:33 01/09/06 (0)
• Need help - Pelle Persson 08:14:32 01/08/06 (2)
  • You have Mail (nt) - Trevor M 08:27:48 01/08/06 (1)
    • Re: You have Mail (nt) - Pelle 08:38:22 01/08/06 (0)
• Dielectric Grease, Silicone Paste, Polyphenol Ethe - Jeff R 01:19:02 01/08/06 (5)
  • CAIG DeoxIt - Velocewest 12:20:00 01/08/06 (1)
    • 'technician in a can' - Peter Florance 14:35:42 01/08/06 (0)
  • Re: Dielectric Grease, Silicone Paste, Polyphenol - T.Hanson 11:29:48 01/08/06 (2)
    • Just remove the controls and clean them... - Brian in Calgary 11:57:01 01/09/06 (0)
    • Silicone Lubricants - Jeff R 12:05:02 01/08/06 (0)
• Where's a good place to post multiple pics? - Jeff R 22:26:25 01/07/06 (2)
  • I use www.photobucket.com... - Lars Olbimmerguy 13:20:43 01/08/06 (1)
    • Thanks - Jeff R 14:19:27 01/08/06 (0)
• I have detailed pics of the blower control wiring - Jeff R 22:22:26 01/07/06 (0)
• No Fuel Pump Pressure in Run Position - Jeff R 22:16:05 01/07/06 (2)
  • Re: No Fuel Pump Pressure in Run Position - Don Daynes 05:26:13 01/08/06 (1)
    • Needs air through AFM, Thanks! - Jeff R 09:11:37 01/08/06 (0)
• M3 CSL on Nurburgring - Not E12 Related - Nick in the Springs 16:39:53 01/07/06 (1)
  • Link Helps... - Nick in the Springs 17:08:12 01/07/06 (0)
• Not starting in cold temps - NC Doug 12:33:10 01/07/06 (4)
  • Re: Not starting in cold temps - Tom (NC) 12:49:54 01/07/06 (3)
    • Where are these parts located? & How much? - NC Doug 15:24:40 01/07/06 (2)
      • Re: Where are these parts located? & How much? - Tom (NC) 16:56:33 01/07/06 (1)
        • Re: Where are these parts located? & How much? - Tom 17:15:01 01/07/06 (0)
• Corroded housing - T.Hanson 12:06:48 01/07/06 (2)
  • Re: Corroded housing - Velocewest 12:13:43 01/08/06 (0)
  • Re: Corroded housing - Tom 12:52:02 01/07/06 (0)
• Wood refinishing - veneer - Jeff 08:35:57 01/07/06 (3)
  • Veneer... - Lenny D. 20:29:09 01/08/06 (0)
  • Re: Wood refinishing - veneer - Velocewest 12:25:01 01/08/06 (0)
  • Re: Wood refinishing - veneer - T.Hanson 12:00:47 01/07/06 (0)
• Thanks, Al - Remy Davison 05:02:09 01/07/06 (0)
• 320i Intake Runners on my 530i Automatic - Jeff R 21:05:23 01/06/06 (1)
  • Check the Techical FAQ - Velocewest 22:15:55 01/06/06 (0)
• 530i to Lambda Control? - Jeff R 20:41:06 01/06/06 (1)
  • Re: 530i to Lambda Control? - Velocewest 23:51:07 01/09/06 (0)
• What happened to that low mileage E12? - Paolo 19:30:14 01/06/06 (0)
• Resistance Plug Wires - Jeff R 18:36:51 01/06/06 (3)
  • Explanation, long - Mike W. 19:12:41 01/06/06 (2)
    • Upgrades to the stock ignition set up? - Jeff R 19:37:59 01/06/06 (1)
      • Re: Upgrades to the stock ignition set up? - Mike W. 21:20:09 01/06/06 (0)
• Dome Light - JamesPants 17:32:36 01/06/06 (2)
  • Re: Dome Light - Karl in KS 21:08:54 01/08/06 (0)
  • Dome Light - Dan Lafley 16:09:25 01/07/06 (0)
• For sale 79 528i parts car - Mark 17:19:41 01/06/06 (0)
• $8,400 e12??? - Bill Hynes 11:02:08 01/06/06 (10)
  • Bidding hit $3500, reserve not met (nt) - Velocewest 00:03:31 01/10/06 (0)
  • awwww, comon... - Trevor M 16:04:00 01/06/06 (0)
  • "Blemish under the bra"... Yeah Like - Lars Olbimmerguy 15:49:11 01/06/06 (0)
  • He's obviously just fishing for it's value - Carl- 12:31:48 01/06/06 (3)
    • Much nicer than mine ...but not 10x as much - Carl 17:33:46 01/06/06 (2)
      • Re: Much nicer than mine ...but not 10x as much - Nick in the Springs 17:36:24 01/07/06 (1)
        • Here's a pic - Nick in the Springs 17:41:15 01/07/06 (0)
  • Re: $8,400 e12??? The guy is Nuts... - Nick in the Springs 12:22:13 01/06/06 (0)
  • Re: $8,400 e12??? - Kaveman 11:06:36 01/06/06 (1)
    • That E12 was up on Ebay months ago!! hmmm.... EOM - Andrew in Chicago 11:26:43 01/06/06 (0)
• Floor mats from World Upholstery in Ca.??? - Pierre D 09:24:38 01/06/06 (2)
  • Re: Floor mats from World Upholstery in Ca.??? - Robert Knowlton 10:25:53 01/06/06 (1)
    • Re: Floor mats from World Upholstery in Ca.??? - Dale 12:29:50 01/06/06 (0)
• 3.7L Project Update & Pics - Misha 09:10:22 01/06/06 (13)
  • Re: 3.7L Project Update & Pics - TCD 11:58:52 01/06/06 (3)
    • agreed, I was wondering the same thing - Adam Wilson in Chicago 12:06:08 01/06/06 (2)
      • My mistake: 300bhp less 10-12% to crank - Misha 13:35:15 01/06/06 (1)
        • 15% is more realistic - TCD 13:39:14 01/06/06 (0)
  • Est 3.7L build Cost? - Nick in the Springs 10:09:08 01/06/06 (0)
  • Re: 3.7L Project Update & Pics - T.Hanson 09:53:19 01/06/06 (1)
    • BMP 8mm wires. Cover... - Misha 13:37:45 01/06/06 (0)
  • mighty impressive, a few questions - Adam Wilson in Chicago 09:45:55 01/06/06 (4)
    • Answers - Misha 14:05:06 01/06/06 (3)
      • Re: Answers - Adam Wilson in Chicago 14:08:36 01/06/06 (2)
        • fahey hub...? - jim@dashop 17:22:31 01/06/06 (0)
        • I know we are at odds.... - Misha 14:20:30 01/06/06 (0)
  • Let me be the first to say...wooooooow!!! - Eddie in TO 09:36:55 01/06/06 (0)
• Ford's still crappy - Kevin Gailey 23:18:14 01/05/06 (6)
  • It's the difference between building - Mike W. 16:18:55 01/06/06 (0)
  • Re: Ford's still crappy - Eric Q 11:41:20 01/06/06 (0)
  • It's not totally the Manufacturer's Fault - Lars Olbimmerguy 09:10:00 01/06/06 (2)
    • Re: It's not totally the Manufacturer's Fault - T.Hanson 09:58:11 01/06/06 (1)
      • There... You said it! We are not likely - Lars OBG 15:56:38 01/06/06 (0)
  • Re: Ford's still crappy - Trevor M 06:48:58 01/06/06 (0)
• LA/OC/SD Old school BMW meet, Jan 15th - AllynS 22:47:24 01/05/06 (4)
  • Re: LA/OC/SD Old school BMW meet, Jan 15th - Keith 21:28:54 01/15/06 (0)
  • Whattya say Don??? - Eric Q 11:42:30 01/06/06 (2)
    • Re: Whattya say Don??? - Don Daynes 13:39:48 01/06/06 (1)
      • Not yet... - Eric Q 19:06:25 01/06/06 (0)
• need advice on seat repair. - jason in Philly 17:09:22 01/05/06 (6)
  • call Kevin - Steve Haygood 15:24:32 01/11/06 (0)
  • E28 - Mike W. 18:01:23 01/06/06 (0)
  • Try World Upholstery in Ca. They have presewn ... - Pierre Duy 09:22:24 01/06/06 (0)
  • Find a used leather set and re-furbish - Misha 08:32:52 01/06/06 (0)
  • Re: need advice on seat repair. - Trevor M 19:01:21 01/05/06 (0)
  • Re: need advice on seat repair. - T.Hanson 17:56:06 01/05/06 (0)
• Pipes - ET57 15:24:33 01/05/06 (1)
  • Re: Pipes - Karl in KS 21:17:01 01/08/06 (0)
• E12 Speed Sensor. - Rafael 13:33:32 01/05/06 (1)
  • More info please - Velocewest 18:31:38 01/06/06 (0)
• BIG Wheels on an E12 - Andrew in Chicago 12:27:07 01/05/06 (2)
  • Re: BIG Wheels on an E12 - Nick in the Springs 12:28:04 01/06/06 (0)
  • Re: BIG Wheels on an E12 - T.Hanson 12:39:38 01/05/06 (0)
• My 633 won't run. I was send here from RF - Leif 09:47:50 01/05/06 (5)
  • AFM - Karl in KS 21:25:45 01/08/06 (0)
  • Re: My 633 won't run. I was send here from RF - Velocewest 11:19:17 01/05/06 (1)
    • WOW, Thanks! I've got a few things to test. - Leif 12:18:50 01/05/06 (0)
  • Re: My 633 won't run. I was send here from RF - T.Hanson 11:10:19 01/05/06 (1)
    • The E24 guys at Roadfly send me here - Leif 12:14:05 01/05/06 (0)
• Looking for a radiator in Seattle.... - Dan Lafley 07:40:46 01/05/06 (6)
  • Re: Looking for a radiator in Seattle.... - Velocewest 10:58:05 01/05/06 (0)
  • Re: Looking for a radiator in Seattle.... - Bill Hynes 10:03:16 01/05/06 (0)
  • Re: Looking for a radiator in Seattle.... - Troy Rudolph 08:29:44 01/05/06 (2)
    • Re: Looking for a radiator in Seattle.... - Dan Lafley 10:28:51 01/05/06 (1)
      • Yes - Misha 10:53:33 01/05/06 (0)
  • Re: Looking for a radiator in Seattle.... - Larry Mills 08:19:52 01/05/06 (0)
• 1981 528i vacuum hose routing - Kristopher 17:19:43 01/04/06 (3)
  • Do you mean - - Carl 08:45:55 01/05/06 (2)
    • Next bit... - Kristopher 18:05:35 01/06/06 (1)
      • Re: Next bit... - Carl 21:17:37 01/06/06 (0)
• Leaking injector hose - Bill Hynes 15:18:33 01/04/06 (2)
  • It all depends - Mike W. 18:45:27 01/04/06 (0)
  • Re: Leaking injector hose - T.Hanson 18:11:28 01/04/06 (0)
• Question for Al from Oz - Remy Davison 05:35:10 01/04/06 (1)
  • Maybe - Al from OZ 02:59:29 01/07/06 (0)
• Clutch?!?!!? - Dan J 23:49:46 01/03/06 (7)
  • More info! - Dan J 11:29:31 01/05/06 (2)
    • Ummmm...ok...(long) - Mike in Lancaster 04:58:02 01/06/06 (0)
    • They tend to go quick (long) - Mike W. 17:58:48 01/05/06 (0)
  • I bet it's the hydraulics - Mike W. 18:39:29 01/04/06 (0)
  • Probably not the clutch, but more likely the - Big Dog 13:13:22 01/04/06 (0)
  • Re: Clutch?!?!!? - Velocewest 12:11:01 01/04/06 (1)
    • Re: Clutch?!?!!? - Mike in Lancaster 13:09:23 01/04/06 (0)
• Question on manifolds - Dan J 22:58:17 01/03/06 (8)
  • Re: Question on manifolds - Velocewest 11:48:51 01/04/06 (5)
    • About the 745.. - Dan J 11:36:15 01/05/06 (2)
      • Re: About the 745.. - Velocewest 15:46:21 01/05/06 (0)
      • Great deal for first e12 customer! - TCD 13:36:48 01/05/06 (0)
    • Lazy and sloppy?!? - Mike in Chicago 06:28:34 01/05/06 (1)
      • Re: Lazy and sloppy?!? - Velocewest 09:27:35 01/05/06 (0)
  • Mike where are you to answer this question?? EOM - Andrew 07:35:03 01/04/06 (1)
    • LOL, I can't be here all the time! - Mike W. 18:31:42 01/04/06 (0)
• Paging Mike W.(Happy New Year to All) - Oba Biddeau 14:06:12 01/03/06 (1)
  • Right here Oba - Mike W 17:10:39 01/03/06 (0)
• ST sway bar bushings - Medly 12:31:48 01/03/06 (4)
  • Check out Energy Suspension - Velocewest 13:07:48 01/03/06 (3)
    • bought mine at AutoZone - Adam Wilson in Chicago 07:39:42 01/04/06 (0)
    • Re: Check out Energy Suspension - Medly 19:33:25 01/03/06 (1)
      • I modified some energy suspension stuff - Peter Florance 21:29:26 01/03/06 (0)
• Any Gold Coasters Out There? - Jim Hineline 12:06:52 01/03/06 (2)
  • Re: Any Gold Coasters Out There? - Al from Oz 02:54:58 01/07/06 (1)
    • Re: Any Gold Coasters Out There? - Jim Hineline 00:24:33 01/08/06 (0)
• 78 530i Oil Filter and Plugs - Jeff R 23:33:10 01/02/06 (10)
  • Car came in - Lars Olbimmerguy 22:34:00 01/03/06 (1)
    • Not the first time I've seen Platinum problems... - Lars 22:38:36 01/03/06 (0)
  • I do not recommend platinum on cars not designed - Pierre 20:33:30 01/03/06 (0)
  • My thoughts on the Bosch Platinums - Trevor M 18:24:49 01/03/06 (0)
  • Re: 78 530i Oil Filter and Plugs - Peter Florance 05:32:41 01/03/06 (3)
    • Hey Peter- Where do you get Bosch plugs for $.99 ? - Carl 09:01:32 01/03/06 (2)
      • Pep Boys "They're air-fresher people" - Peter Florance 21:30:55 01/03/06 (0)
      • WR9DC Bosch Plugs for $1.09 - Jeff R 10:30:19 01/03/06 (0)
  • Jeff... - Mike in Lancaster 04:37:33 01/03/06 (1)
    • Plugs and valves - Mike W. 17:29:36 01/03/06 (0)
• New Year Travel and Photo - Mike in LA 17:57:48 01/02/06 (2)
  • Re: New Year Travel and Photo - Mike in Lancaster 04:23:10 01/03/06 (0)
  • Re: New Year Travel and Photo - AllynS 21:10:55 01/02/06 (0)
• A/C compressor clutch question... - Lenny D. 17:34:01 01/02/06 (2)
  • Re: A/C compressor clutch question... - Mike W. 17:42:04 01/03/06 (1)
    • Re: A/C compressor clutch question... - Lenny D. 18:49:50 01/03/06 (0)
• brake bleeder screw sequence - Andy H 17:09:03 01/02/06 (4)
  • Re: brake bleeder screw sequence - T.Hanson 17:31:43 01/02/06 (2)
    • Re: brake bleeder screw sequence - Andy H 18:37:34 01/02/06 (1)
      • tool picture Vise Grip 4LW - Peter Florance 05:35:07 01/03/06 (0)
  • Re: brake bleeder screw sequence - Lenny D. 17:20:39 01/02/06 (0)
• 6-320i intake runners for sale - Anthony in San Rafael 11:42:41 01/02/06 (1)
  • WOW are 320i's getting rare in the yards?..... - Mike in Lancaster 04:42:01 01/03/06 (0)
• Hope everyone had a happy new year... - Bill Hynes 05:59:15 01/02/06 (1)
  • Re: Hope everyone had a happy new year... - T.Hanson 06:47:49 01/02/06 (0)
• Need rear doors with zero rust or bondo - Carl-Seattle 23:02:35 01/01/06 (3)
  • Re: Need rear doors with zero rust or bondo - D. 19:21:13 01/03/06 (1)
    • Re: Need rear doors with zero rust or bondo - D. 13:46:23 01/05/06 (0)
  • I've got em bare door or complete assembly - Craig in Davis 07:10:15 01/02/06 (0)
• 78 530i Engine Performance w/o Thermal Reactors - Jeff R 21:19:57 01/01/06 (3)
  • I took the TR of and ran a cat. Motor ran cooler.. - Pierre D 10:32:07 01/02/06 (0)
  • Re: 78 530i Engine Performance w/o Thermal Reactors - Dan Lafley 02:04:52 01/02/06 (1)
    • Re: 78 530i Engine Performance w/o Thermal Reactors - Mark 08:21:25 01/02/06 (0)
• Motor Mounts - Dan Lafley 17:55:11 01/01/06 (3)
  • Re: Motor Mounts - Thought you would have a reply by now - 11:53:42 01/02/06 (2)
    • Re: Motor Mounts - Daniel H 15:39:17 01/02/06 (1)
      • Re: Motor Mounts - Peter Florance 05:27:50 01/03/06 (0)
• 78 530i Emissions/Thermal Reactors Question - Jeff R 14:03:27 01/01/06 (3)
  • Re: 78 530i Emissions/Thermal Reactors Question - Mike W. 14:49:59 01/01/06 (2)
    • Re: 78 530i Emissions/Thermal Reactors Question - Jeff R 14:59:26 01/01/06 (1)
      • Yes and no - Mike W. 17:39:56 01/03/06 (0)
• Stereo Install - LOTS OF ROOM - Brian in Calgary 12:30:46 01/01/06 (0)
• steering wheel retrofit - jim h 07:43:12 01/01/06 (5)
  • What did you pull it from? - Pierre 09:43:44 01/01/06 (4)
    • Some E28's will - Mike W. 11:24:55 01/01/06 (2)
      • Re: Some E28's will - jimh 11:32:18 01/01/06 (1)
        • Nope - Mike W. 11:58:08 01/01/06 (0)
    • Re: What did you pull it from? - jimh 11:22:15 01/01/06 (0)
• L-Jetronic Vs LH Jetronic on saabs, Volvos..swaps? - Aaron from Aus 04:58:49 01/01/06 (9)
  • megasquirt the best way to go, imho - marc79euro645 18:23:40 01/05/06 (0)
  • Re: L-Jetronic Vs LH Jetronic on saabs, Volvos..swaps? - Wietse 07:11:02 01/01/06 (6)
    • Re: L-Jetronic Vs LH Jetronic on saabs, Volvos..sw - Aaron from Aus 00:31:58 01/02/06 (0)
    • I think you're confusing D and LH - Mike W. 12:07:31 01/01/06 (4)
      • 6 cylinder Volvo and Alfa - James Hineline 20:29:05 01/01/06 (2)
        • Alfa Romero, the most famous car that never was... - Velocewest 22:51:39 01/01/06 (1)
          • Oops, Freudian slip! Make that Romeo - James Hineline 23:35:25 01/01/06 (0)
      • You're right - my bad....darn it., - Wietse 13:27:47 01/01/06 (0)
  • Re: L-Jetronic Vs LH Jetronic on saabs, Volvos..sw - Aaron from Aus 05:00:46 01/01/06 (0)
• volvo fuel pump swap? - Dan in N.B. 18:46:10 12/31/05 (5)
  • Re: volvo fuel pump swap? - Trevor M 19:06:17 01/01/06 (1)
    • Re: volvo fuel pump swap? - BradInTexas 15:03:41 01/02/06 (0)
  • Re: volvo fuel pump swap? - stewart in slc 01:29:20 01/01/06 (0)
  • Not sure about Volvo but Chev Vega - - Carl 20:35:17 12/31/05 (1)
    • ONLY on the pre pump - Mike W. 22:25:38 12/31/05 (0)
• 80 Euro spec 6 series parts car - Gordon 18:20:52 12/31/05 (2)
  • Re: 80 Euro spec 6 series parts car - Rami 03:23:37 01/01/06 (1)
    • BMWSGOD = dull tool - Velocewest 13:05:23 01/03/06 (0)
• 79 528i for sale, $450 - Gordon 17:05:07 12/31/05 (0)
• 76' 530i For Sale in Nor. California - Chris 10:02:36 12/31/05 (0)
• Getting the alternator to alternate - Big Dog 18:12:08 12/30/05 (4)
  • Re: Getting the alternator to alternate - Peter Florance 23:23:15 12/30/05 (3)
    • Re: Getting the alternator to alternate - Sam Schultz 08:37:17 12/31/05 (0)
    • Peter, you the man. The track car is getting more - Big Dog 06:50:54 12/31/05 (1)
      • Front valance alternatives.... - Wietse 07:56:04 12/31/05 (0)
• Question about sunroof - Trevor M 14:00:07 12/30/05 (5)
  • I think I'd rather have a manual sunroof, so let.. - pjpace 11:40:10 01/01/06 (1)
    • Re: I think I'd rather have a manual sunroof, so let.. - Trevor M 16:04:14 01/01/06 (0)
  • Re: Question about sunroof - Carl 14:40:02 12/30/05 (2)
    • yeah, less stuff to break!!! nt - Daniel H 14:12:03 12/31/05 (1)
      • Re: yeah, less stuff to break!!! nt - Trevor M 15:15:18 12/31/05 (0)
• New, old stock performance tires on ebay - Adam Wilson in Chicago 13:02:02 12/30/05 (6)
  • good tires, but why the "As-Is" statement? - Pierre 07:27:02 12/31/05 (0)
  • Re: New, old stock performance tires on ebay - Jim 18:46:42 12/30/05 (0)
  • Re: New, old stock performance tires on ebay - Peter Florance 17:36:17 12/30/05 (3)
    • 4 Hoosiers, eh? - Eric Q 00:28:34 12/31/05 (2)
      • not a chance - it's all you! - Peter Florance 05:16:05 12/31/05 (1)
        • Though I signed up for the lottery... - Eric Q 23:48:38 01/01/06 (0)
• Need owners manual for 1980 - Pierre 07:40:07 12/30/05 (6)
  • Hey Pierre, about your car - Adam Wilson in Chicago 07:53:09 12/30/05 (5)
    • Re: Hey Pierre, about your car - Pierre 07:17:36 12/31/05 (1)
      • Re: Hey Pierre, about your car - Will Ollison 16:07:58 12/31/05 (0)
    • There must be another Pierre here. - Pierre 09:22:37 12/30/05 (0)
    • Was that the 'clone' in Raleigh, NC? - Jeff Olson 09:15:56 12/30/05 (1)
      • Re: Was that the 'clone' in Raleigh, NC? - Pierre 07:24:08 12/31/05 (0)
• 'Euro' E24 stuff FS near Atlanta, GA... - Jeff Olson 19:43:13 12/29/05 (0)
• Heater Blower and AC blower dead... - Rich 13:26:08 12/29/05 (5)
  • Re: Heater Blower and AC blower dead... - Mike W. 20:55:06 12/29/05 (2)
    • Re: Heater Blower and AC blower dead... - Trevor M 09:11:44 12/30/05 (1)
      • Re: Heater Blower and AC blower dead... - Rich 09:15:38 12/31/05 (0)
  • Re: Heater Blower and AC blower dead... - Will Ollison 15:44:56 12/29/05 (0)
  • Re: Heater Blower and AC blower dead... - Will Ollison 15:44:46 12/29/05 (0)
• What ever became of the jim@dashop hotrod e12? - Mike in Chicago 13:05:21 12/29/05 (2)
  • he post often (try a search)...and many are jelous - eric in denver 17:58:18 12/29/05 (1)
    • oops was talking about velocewest...NTnt - eric in denver...aka stupid 18:00:07 12/29/05 (0)
• 1980 635csi Euro for sale Columbus, OH - Rocky 07:39:54 12/29/05 (0)
• The evil that (German engineer) men do - Velocewest 00:05:34 12/29/05 (3)
  • Their agenda! - Mikey 02:46:16 12/29/05 (0)
  • maybe substitute some coupling nuts? - Robert Bondi 01:10:31 12/29/05 (1)
    • Re: maybe substitute some coupling nuts? - Velocewest 09:25:19 12/29/05 (0)
• e12 ignition coil interchangeable??? - santiago 19:34:36 12/28/05 (4)
  • Re: e12 ignition coil interchangeable??? - Peter Florance 05:35:04 12/29/05 (2)
    • Shame on me for bad advice (nt) - Velocewest 09:26:32 12/29/05 (1)
      • No good deed goes un-punished (nt) - Peter Florance 04:31:33 12/30/05 (0)
  • Should be - Velocewest 23:36:29 12/28/05 (0)
• 1980 Polaris paint code number? - Pierre 18:29:52 12/28/05 (3)
  • 060 = BMW Polaris Silver Metallic - Brian in Calgary 20:25:35 12/28/05 (2)
    • Thanks Brian! - Pierre Duy 06:12:02 12/30/05 (1)
      • Check on your front shock tower... - Brian in Calgary 12:27:46 12/30/05 (0)
• If you need parts, I am parting out a parts car - Craig in Davis 18:28:14 12/28/05 (11)
  • I need a fuel pump for my 528i - Dan in N.B. 18:40:03 12/31/05 (1)
    • Sorry, keeping the fuel pump nt - Craig in Davis 20:13:29 01/01/06 (0)
  • Re: If you need parts, I am parting out a parts car - Ernie in Houston 15:17:14 12/31/05 (1)
    • Ernie check your email nt - Craig in Davis 20:14:06 01/01/06 (0)
  • Is the sunroof cable a part that can be parted? - pjpace 12:24:40 12/29/05 (4)
    • It is a 79 with motor in the trunk, is that what - Craig in Davis 18:43:40 12/29/05 (3)
      • No - the motor is up front, under the hood. - pjpace 08:40:03 12/30/05 (2)
        • Hey, I've bought cars with that motor in the trunk - Mike W. 17:47:06 12/30/05 (1)
          • Hehe, I have a rear-engine 745i right now - Velocewest 11:29:40 12/31/05 (0)
  • Re: If you need parts, I am parting out a parts car - Tom Masters 09:24:23 12/29/05 (1)
    • Check you email Tom nt - Craig in Davis 18:54:33 12/29/05 (0)
• FS: 89-92 - 5/7 series 15x7 wheels - AllynS 18:27:39 12/28/05 (0)
• Curious about LSD diffs for e12 - Michael Oswald 12:28:30 12/28/05 (2)
  • Yes - Velocwest 15:03:40 12/28/05 (1)
    • Thanks! - Michael Oswald 15:56:02 12/28/05 (0)
• Headlight Switch - Jay in VA 07:37:52 12/28/05 (1)
  • Re: Headlight Switch - Velocewest 11:38:30 12/28/05 (0)
• sunroof parts - Peter Florance 05:07:12 12/28/05 (4)
  • Re: sunroof parts - Daniel H 14:24:13 12/28/05 (0)
  • Re: Roll cage? - jim H 08:32:44 12/28/05 (2)
    • I think that was Peter Mooney - Peter Florance 05:16:48 12/31/05 (1)
      • Re: I think that was Peter Mooney - jimh 11:28:49 01/01/06 (0)
• Anyone swap to a later fuse box? - Velocewest 19:33:16 12/27/05 (4)
  • Re: Anyone swap to a later fuse box? - Guess who? 07:49:02 12/28/05 (1)
    • Re: Anyone swap to a later fuse box? - Velocewest 11:44:56 12/28/05 (0)
  • Re: Anyone swap to a later fuse box? - Al Canuck 23:18:12 12/27/05 (0)
  • Re: Anyone swap to a later fuse box? - Mike in Lancaster 19:51:42 12/27/05 (0)
• BMP Classic catalog - Velocewest 15:40:01 12/27/05 (5)
  • Re: BMP Classic catalog - Robert Bondi 01:02:06 12/29/05 (0)
  • On the cover???..........pretty cool if it is!!! - Eddie in TO 12:38:47 12/28/05 (0)
  • Re: BMP Classic catalog - Mike in Lancaster 19:49:27 12/27/05 (0)
  • Re: BMP Classic catalog - T.Hanson 19:36:22 12/27/05 (1)
    • Re: BMP Classic catalog - Carl-Seattle 07:55:17 12/28/05 (0)
• What is a 4 - 5 Speed Tranny conversion worth? - Larry Mills 11:04:44 12/27/05 (2)
  • Re: What is a 4 - 5 Speed Tranny conversion worth? - Mike W. 17:46:21 12/27/05 (0)
  • Re: What is a 4 - 5 Speed Tranny conversion worth? - T.Hanson 14:45:03 12/27/05 (0)
• What fresh hell is this! - Velocewest 10:50:34 12/27/05 (5)
  • like the waste gate bolts?? - papajimmm nh no bmws 12:19:53 12/27/05 (4)
    • Don't even think about the wrong tool - Mike W. 17:55:33 12/27/05 (3)
      • don't think cheaper? staerted as safety issue?? - papajimmm nh 18:26:17 12/27/05 (2)
        • They are Torx - Velocewest 19:27:56 12/27/05 (1)
          • Re: They are Torx - Don Daynes 21:26:36 12/27/05 (0)
• Peter Florence, electric Q - Velocewest 09:59:23 12/27/05 (3)
  • Re: Peter Florence, electric Q - Mike in LA 16:03:02 12/27/05 (1)
    • Re: Peter Florence, electric Q - Velocewest 19:30:38 12/27/05 (0)
  • Re: Peter Florence, electric Q - Peter Florance 12:42:47 12/27/05 (0)
• BBS/Mahle 14"/7" wheels on eBay... - Jeff Olson 08:20:51 12/27/05 (1)
  • Re: BBS/Mahle 14"/7" wheels on eBay... - Sam R. in Roseville 09:44:11 12/27/05 (0)
• Radio / Console removal - Mike 00:10:59 12/27/05 (9)
  • Re: Stereo riser available - Will Ollison 04:24:22 12/28/05 (0)
  • Re: Radio / Console removal - Velocewest 09:47:49 12/27/05 (7)
    • very simple actually - Brian in Calgary 14:20:27 12/27/05 (6)
      • Re: very simple actually - Mike in LA 16:06:43 12/27/05 (5)
        • Re: very simple actually - Don Daynes 21:37:49 12/27/05 (2)
          • That's a great idea Don...and... - Brian in Calgary 12:21:04 12/28/05 (0)
          • Re: very simple actually - jim H 08:38:10 12/28/05 (0)
        • sterio riser available for clearance... - eric in denver 21:29:41 12/27/05 (1)
          • Re: sterio riser available for clearance... - Mike in LA 01:29:21 12/28/05 (0)
• looking for a fuel pump that'll fit '80 528i - Dan in N.B. 18:45:51 12/26/05 (3)
  • Main pump? I have a Canadian source for you - Brian in Calgary 14:25:12 12/27/05 (0)
  • Re: looking for a fuel pump that'll fit '80 528i - brian 20:18:42 12/26/05 (0)
  • Re: looking for a fuel pump that'll fit '80 528i - brian 20:16:40 12/26/05 (0)
• here's to Dunrite's - ChuckNC 12:03:53 12/26/05 (0)
• Oil Level Sender - Anthony in San Rafael 10:30:59 12/26/05 (5)
  • Re: Oil Level Switch - Karl in KS 03:42:45 12/31/05 (0)
  • Re: Oil Level Sender - Don Daynes 11:42:23 12/26/05 (3)
    • why not a guage? - eric in denver 15:04:48 12/26/05 (2)
      • It's just a simple switch - Mike W. 21:07:43 12/26/05 (1)
        • It's an idiot light like on the E30 - Pierre 21:52:51 12/27/05 (0)
• CR 5 speed question - Mikey 09:43:58 12/26/05 (1)
  • Re: CR 5 speed question - Mike W. 21:47:48 12/26/05 (0)
• Wires and Light - Arthur 01:31:21 12/26/05 (1)
  • Re: Wires and Light - Velocewest 09:51:42 12/27/05 (0)
• e-28 door conversion has anoyone done & how to - brian 23:50:39 12/25/05 (4)
  • Re: e-28 door conversion has anoyone done & how to - peter mooney 17:47:38 12/27/05 (0)
  • Did'nt you post this back on December 22 ? - Carl 10:23:16 12/26/05 (2)
    • Re: Did'nt you post this back on December 22 ? - brian 06:15:17 12/27/05 (1)
      • You can get alot of info searching the forum- - Carl 08:26:24 12/27/05 (0)
• what performance upgrades to do? (long) - Micah 16:36:42 12/25/05 (11)
  • For 1000 you could get.... - Andrew 11:39:58 12/26/05 (0)
  • Re: what performance upgrades to do? (long) - Frank H 09:55:54 12/26/05 (0)
  • In addition... - Eric Q 02:41:30 12/26/05 (0)
  • what Erik said - Karl in KS 18:51:57 12/25/05 (1)
    • I agree - Chris Itterly 21:17:55 12/25/05 (0)
  • Re: what performance upgrades to do? (long) - Erik M 18:05:55 12/25/05 (5)
    • SS Braided Brake lines - forgot to mention - ERik M 14:30:43 12/26/05 (0)
    • Reach the limits of the stock car first - Pierre 22:59:45 12/25/05 (3)
      • Hey, that's turn 4 at Willow! - Eric Q 02:34:56 12/26/05 (2)
        • It is. Post pics of your M7. - Pierre 09:00:16 12/27/05 (1)
          • May not have electronic version... - Eric Q 13:30:28 12/28/05 (0)
• Happy Holidays everyone!!! - Daniel H 22:41:15 12/24/05 (2)
  • Re: Happy Holidays everyone!!! - Roma T. Colella 08:38:03 12/25/05 (1)
    • Merry Christmas and Happy New Year - Tom in pueblo 08:55:48 12/25/05 (0)
• Odometer Gear....Again - Dan Lafley 21:44:52 12/24/05 (7)
  • Re: Odometer Gear....Again - Peter Florance 08:30:51 12/26/05 (3)
    • Re: Odometer Gear....Again - Trevor M 08:34:22 12/26/05 (2)
      • This could be a problem..... - Dan Lafley 10:46:35 12/26/05 (1)
        • Re: This could be a problem..... - Trevor M 11:20:04 12/26/05 (0)
  • Seen a couple... all 11 teeth (nt) - Trevor M 10:15:20 12/25/05 (2)
    • Re: Seen a couple... all 11 teeth (nt) - mik 23:43:32 12/25/05 (1)
      • Re: Seen a couple... all 11 teeth (nt) - Trevor M 08:00:33 12/26/05 (0)
• Is topping the coolant really my overheating fix? - Blair (Seattle) 17:17:39 12/24/05 (8)
  • I always suspect the worst - Mike W. 22:12:18 12/25/05 (0)
  • Re: Is topping the coolant really my overheating fix? - Ernie in Houston 19:05:39 12/25/05 (0)
  • Re: Is topping the coolant really my overheating f - Karl in KS 18:59:28 12/25/05 (0)
  • Re: Is topping the coolant really my overheating fix? - Carl-Seattle 16:36:51 12/25/05 (0)
  • Re: Is topping the coolant really my overheating f - T.Hanson 08:29:43 12/25/05 (1)
    • just had bad freeze plug so it does happen NT - eric in denver 21:32:09 12/25/05 (0)
  • Re: Is topping the coolant really my overheating fix? - Daniel H 08:14:38 12/25/05 (1)
    • Change the radiator and cap - Pierrre 23:11:34 12/25/05 (0)
• Still looking for a Front Top Timing Cover (M30) - Klaus 14:32:52 12/24/05 (1)
  • Check your mail (nt) - Mike W. 14:41:02 12/24/05 (0)
• E12 four speed to five speed conversion - JimH 14:06:21 12/24/05 (1)
  • Re: E12 four speed to five speed conversion - jim@dashop 14:15:29 12/24/05 (0)
• 75 degree thermostat - Steve Giesecke 23:43:57 12/23/05 (3)
  • I just did same in mine - Brian in Calgary 14:38:53 12/27/05 (0)
  • No. - Eric Q 16:50:57 12/24/05 (0)
  • Re: 75 degree thermostat - Klaus 14:24:03 12/24/05 (0)
• HELP/Need Throttle Pressure Cable/ZF3HP22 - Roma T. Colella 13:50:28 12/23/05 (13)
  • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Klaus 14:18:31 12/24/05 (1)
    • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Roma T. Colella 08:04:03 12/25/05 (0)
  • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - ben 07:36:00 12/24/05 (4)
    • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Roma T. Colella 08:16:11 12/25/05 (3)
      • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - ben 15:40:01 12/25/05 (2)
        • Re: HELP/Need short cable - Roma T. Colella 13:28:27 12/26/05 (1)
          • Re: HELP/Need short cable - ben 08:21:08 12/27/05 (0)
  • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Peter Florance 15:00:50 12/23/05 (5)
    • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Roma T. Colella 16:18:59 12/23/05 (4)
      • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Peter Florance 16:32:31 12/23/05 (3)
        • Re: HELP/Need Throttle Pressure Cable/ZF3HP22 - Roma T. Colella 17:44:00 12/23/05 (2)
          • maybe you could do this: - Peter Florance 19:15:44 12/23/05 (1)
            • Re: maybe you could do this: - Roma T. Colella 07:56:20 12/25/05 (0)
• Auto Transmission Gear Indicator Lights - Ernie in Houston 08:40:04 12/23/05 (4)
  • I have the same issue - - Brian in Calgary 14:11:40 12/23/05 (3)
    • check ground - Karl in KS 19:04:31 12/25/05 (1)
      • Re: check ground - Ernie in Houston 19:30:09 12/25/05 (0)
    • Re: I have the same issue - - Ernie in Houston 15:30:53 12/23/05 (0)
• HELP! Fellow Bimmerhead Needs A Mechanic In Baker - Elwood AKA Darin O' the Glen 07:21:17 12/23/05 (0)
• Block coolant drain bolt - length ? - Carl 20:07:39 12/22/05 (1)
  • Re: Block coolant drain bolt - length ? - Trevor M 20:11:41 12/22/05 (0)
• anyone have an ignition switch F/S ?? - john a. 20:03:33 12/22/05 (1)
  • Re: anyone have an ignition switch F/S ?? - Big Dog 05:43:31 12/23/05 (0)
• Headlight Upgrade, wow!! - Lou in Denver 17:05:50 12/22/05 (2)
  • same here...just went cheap and inexpensive - Eric in denver 18:52:29 12/22/05 (1)
    • wow is right!!! nice upgrade. - eric in denver 13:02:18 12/25/05 (0)
• E12 Euro parts on Craigslist - Gordon 15:48:17 12/22/05 (1)
  • See Sam R in Roseville post below nt - Craig in Davis 18:18:02 12/22/05 (0)
• 1981 528i w/'Euro' bumpers FS in NC! - Jeff Olson 13:20:59 12/22/05 (0)
• Well I am ashamed but its time.... - Sam R. From Roseville CA 13:05:33 12/22/05 (0)
• Well I am ashamed but its time.... - Sam R. From Roseville CA 11:09:47 12/22/05 (6)
  • sad to see older members of firstfives move on - Adam Wilson in Chicago 13:00:05 12/22/05 (5)
    • Re: sad to see older members of firstfives move on - Sam R - Roseville, CA 13:07:07 12/22/05 (4)
      • Don't worry, I won't throw stuff at you... - M. Keehn 14:10:15 12/22/05 (3)
        • So do I (pic) - Adam Wilson in Chicago 20:37:36 12/22/05 (2)
          • Adam your a dog!!!! ;) - Sam R. 10:07:41 12/26/05 (0)
          • Re: So do I (pic) - Tom in pueblo 11:59:39 12/24/05 (0)
• E-12Runs Greatbut burns oil at the same time !! - Neck Smith 10:19:41 12/22/05 (2)
  • Re: E-12Runs Greatbut burns oil at the same time !! - Carl-Seattle 17:12:46 12/22/05 (1)
    • Don't think you can change the valve stem seals... - Klaus 21:02:17 12/22/05 (0)
• Paging Lars - Peter Florance - First Fives Dictator for Life 07:57:53 12/22/05 (0)
• e-28 door swap - brian 07:52:07 12/22/05 (2)
  • Re: e-28 door swap - peter mooney 12:52:36 12/22/05 (1)
    • Re: e-28 door swap- and- - Carl-Seattle 15:11:33 12/22/05 (0)
• Rekeying locks - Velocewest 22:25:34 12/21/05 (4)
  • Doors, yes, ... - Mike W. 22:51:02 12/21/05 (3)
    • Re: Doors, yes, ... - Peter Florance 04:54:01 12/22/05 (2)
      • Re: Doors, yes, ... - Tom in pueblo 12:45:44 12/22/05 (1)
        • white lithium? - Peter Florance 19:01:30 12/22/05 (0)
• How much would this cost (average) - Rick 18:40:20 12/21/05 (5)
  • I have one... - Patrick McHugh 22:52:45 12/24/05 (0)
  • Probably cheaper to pick up good used - Velocewest 22:16:26 12/21/05 (1)
    • yep, i sold a complete 3.5 longblock for - Justin in C'ville 13:36:46 12/22/05 (0)
  • Re: How much would this cost (average) - fadi faisal 20:09:21 12/21/05 (1)
    • Re: How much would this cost (average) - T.Hanson 21:18:32 12/21/05 (0)
• Preventative slave/master cylinders - T.Hanson 17:34:06 12/21/05 (1)
  • Re: Preventative slave/master cylinders - Mike W. 18:52:35 12/21/05 (0)
• Custom Exhaust - AllynS 15:26:22 12/21/05 (1)
  • Re: Custom Exhaust - Eddie in TO 20:41:17 12/21/05 (0)
• WATER IN MY TRUNK - Bertan 12:33:26 12/21/05 (9)
  • Re: WATER IN MY TRUNK - Bertan 16:07:04 12/22/05 (1)
    • Re: WATER IN MY TRUNK - Karl in KS 20:49:41 12/22/05 (0)
  • Rust under seal - Hans V. 14:18:31 12/22/05 (0)
  • Re: WATER IN MY TRUNK - Bertan 02:22:20 12/22/05 (0)
  • Re: WATER IN MY TRUNK check rear window seal - Carl-Seattle 21:37:13 12/21/05 (0)
  • Re: WATER IN MY TRUNK - T.Hanson 17:20:25 12/21/05 (0)
  • Check the tail light seals - Eddie in TO 14:26:36 12/21/05 (1)
    • Oops...I see Anthony bet me to it.....nt - Eddie in TO 14:29:44 12/21/05 (0)
  • Re: WATER IN MY TRUNK - Anthony in San Rafael 14:23:32 12/21/05 (0)
• Biggest 16 in. wheels you can put on? - Bob Humphrey 10:44:04 12/21/05 (1)
  • Look down a few threads - Velocewest 22:11:41 12/21/05 (0)
• Adam Wilson's M535i - Mitch in H.B. 15:27:25 12/20/05 (2)
  • 1st to finish, my stripes or your E12 Alpina B7? - Adam Wilson in Chicago 09:37:04 12/21/05 (1)
    • Re: 1st to finish, my stripes or your E12 Alpina B7? - Mitch in H.B. 09:29:20 12/22/05 (0)
• Is my airflow meter bad? - brett reichart 15:17:41 12/20/05 (6)
  • try adjusting throttle more at idle & readjust tps - marc79euro645 21:02:25 12/23/05 (0)
  • Re: Is my airflow meter bad? - Michael R from Melbourne 14:00:30 12/21/05 (0)
  • Sign of failing potentometer - Misha 08:36:59 12/21/05 (1)
    • Re: Sign of failing potentometer - Tom in pueblo 13:20:48 12/24/05 (0)
  • Re: Is my airflow meter bad? - KSBinVA 07:24:45 12/21/05 (0)
  • Re: Is my airflow meter bad? - Tom, NC 17:04:19 12/20/05 (0)
• oil pump replacement - Jamie Seattle 15:16:08 12/20/05 (1)
  • Re: oil pump replacement - Mike W. 22:42:41 12/20/05 (0)
• '78 530i sat for 3 years, gasoline issues - Jeff 13:19:17 12/20/05 (4)
  • Re: '78 530i sat for 3 years, gasoline issues - Trevor M 14:28:29 12/20/05 (0)
  • Re: '78 530i sat for 3 years, gasoline issues - Big Dog 14:14:56 12/20/05 (0)
  • Re: '78 530i sat for 3 years, gasoline issues - Carl-Seattle 13:58:47 12/20/05 (0)
  • Re: '78 530i sat for 3 years, gasoline issues - Daniel H 13:54:58 12/20/05 (0)
• Torque specs crankshaft 3.5 - Anthony in San Rafael 10:43:15 12/20/05 (1)
  • Re: Torque specs crankshaft 3.5 - Velocewest 11:00:03 12/20/05 (0)
• Poor Idle adjustment - Tom in Pueblo 06:27:47 12/20/05 (1)
  • 2 suggestions !! - Jaime Obando 10:03:56 12/22/05 (0)
• Ebay - Bavaria Exhaust Manifolds - fyi - Mike 00:33:08 12/20/05 (11)
  • Buy mine for $50 - Troy Rudolph 08:32:13 12/20/05 (8)
    • Re: Buy mine for $50 - AllynS 14:59:38 12/21/05 (0)
    • Here's a picture. - Troy Rudolph 10:59:16 12/20/05 (0)
    • $50 is a killer deal - jim@dashop 10:53:00 12/20/05 (5)
      • Re: $50 is a killer deal - Tom Masters 11:45:26 12/20/05 (4)
        • Re: $50 is a killer deal - jim@dashop 12:26:43 12/20/05 (3)
          • Please take no offense.... - Sam R. 11:08:31 12/26/05 (0)
          • Re: $50 is a killer deal - Tom Masters 15:14:40 12/20/05 (1)
            • yup...air for sure - jim@dashop 16:47:14 12/20/05 (0)
  • bimmer.doc...? - jim@dashop 07:21:17 12/20/05 (0)
  • Those are Bav manifolds? Well then... - Mike in Lancaster 04:37:21 12/20/05 (0)
• Exhaust of a 2.8L m30 vs a 3.5L e28 - Rob from Brisbane 23:49:08 12/19/05 (1)
  • Re: Exhaust of a 2.8L m30 vs a 3.5L e28 - Peter Florance 04:06:14 12/20/05 (0)
• e21 intake runners - brett reichart 21:01:03 12/19/05 (4)
  • Re: e21 intake runners - Trevor M 05:57:29 12/20/05 (0)
  • Re: e21 intake runners - Mike 00:36:16 12/20/05 (0)
  • Re: e21 intake runners - Damien in Brisbane 21:20:53 12/19/05 (1)
    • HAHA Damien maybe... - Mike in Lancaster 04:48:12 12/20/05 (0)
• Question: What is the fastest stock E12? (USA) - Tom 18:40:44 12/19/05 (3)
  • Re: Question: What is the fastest stock E12? (USA) - Will Ollison 20:22:23 12/19/05 (0)
  • Re: Question: What is the fastest stock E12? (USA) - Will Ollison 20:22:07 12/19/05 (1)
    • Sorry for the double post - Will Ollison 20:24:18 12/19/05 (0)
• Thermostat housing - Steve G 16:53:32 12/19/05 (3)
  • Re: Thermostat housing - T.Hanson 06:56:19 12/20/05 (0)
  • Re: Thermostat housing - Mike in Lancaster 04:55:09 12/20/05 (0)
  • check FAQ on cooling system... - eric in denver 17:44:42 12/19/05 (0)
• Just purchased a '78 530i - Jeff Reed 16:46:42 12/19/05 (2)
  • Re: Just purchased a '78 530i - Peter Florance - First Fives Dictator for Life 04:29:13 12/20/05 (1)
    • And, ... - Troy Rudolph 08:39:23 12/20/05 (0)
• Mike in Inglewood, shoot me an email re runners - Pierre 14:34:23 12/19/05 (1)
  • Re: Mike in Inglewood, shoot me an email re runner - Will Ollison 19:47:36 12/19/05 (0)
• 16" Wheel Identification - Eddie in TO 12:40:09 12/19/05 (3)
  • Thanks Guys... nt - Eddie in TO 11:15:28 12/20/05 (0)
  • Rial 16x8 et11 - TCD 16:29:12 12/19/05 (0)
  • Re: 16" Wheel Identification - jim@dashop 13:06:02 12/19/05 (0)
• Is this tach compatable? - Bill Hynes 10:25:35 12/19/05 (2)
  • Re: Is this tach compatable? - Trevor M 11:06:35 12/19/05 (1)
    • Thanks (nt) - Bill Hynes 15:02:22 12/19/05 (0)
• ECU for a 1979 528i - Mitch in H.B. 06:29:38 12/19/05 (4)
  • Re: ECU for a 1979 528i - Peter Florance 14:15:19 12/19/05 (2)
    • Re: ECU for a 1979 528i - Mitch in H.B. 14:08:57 12/20/05 (1)
      • Jim@dashop post below this one - Peter Florance 18:04:48 12/20/05 (0)
  • Re: ECU for a 1979 528i - jim@dashop 07:41:16 12/19/05 (0)
• Got another E12, would like to join!! - PDuy 14:09:51 12/18/05 (2)
  • Re: Got another E12, would like to join!! - Will Ollison 17:02:32 12/18/05 (1)
    • Re: Got another E12, would like to join!! - PDuy 09:16:39 12/19/05 (0)
• 81 528i 5 speed parts car FS in Portland, $250 - Gordon 10:16:05 12/18/05 (2)
  • Somebody Grab This - Chris in Laguna Beach 11:55:37 12/19/05 (1)
    • No kidding... - Mike in Lancaster 04:52:10 12/20/05 (0)
• 79 528i for sale, $1200 OBO - Gordon 10:05:48 12/18/05 (0)
• stalling after about 7-10 minutes everyday - Dan in N.B. 09:21:32 12/18/05 (6)
  • More info please about symptoms - Pierre 19:56:05 12/18/05 (1)
    • Re: More info please about symptoms - Dan in N.B. 18:43:17 12/26/05 (0)
  • Re: stalling after about 7-10 minutes everyday - Mike W. 12:31:22 12/18/05 (2)
    • oops! 528i and not sure how to check o2 sensor - Dan in N.B. 13:08:11 12/18/05 (1)
      • Re: oops! 528i and not sure how to check o2 sens - Mike W. 17:39:32 12/18/05 (0)
  • Re: stalling after about 7-10 minutes everyday - Daniel H 09:41:40 12/18/05 (0)
• what happened to the bumper guy? - eric in denver 09:14:07 12/18/05 (2)
  • Progress has stalled but... - Mike in Lancaster 04:45:46 12/19/05 (1)
    • it's all good....just wondering (nt) - eric in denver 08:13:08 12/19/05 (0)
• head transplant - Gary 17:57:04 12/17/05 (7)
  • Re: head transplant - Patrick McHugh 22:05:56 12/17/05 (1)
    • Re: head transplant - Gary (UK) 05:48:53 12/18/05 (0)
  • Re: head transplant - Troy Rudolph 20:07:15 12/17/05 (4)
    • Re: head transplant - Gary 05:51:01 12/18/05 (2)
      • Any BMW dealer (nt) - Velocewest 12:35:58 12/19/05 (0)
      • Metric Mechanic... - Mike in Lancaster 04:49:47 12/19/05 (0)
    • Motor mounts too - Mike W. 23:32:44 12/17/05 (0)
• Wiring Diagram - dp 14:05:56 12/17/05 (1)
  • euro or u.s.? - Dan in N.B. 09:08:42 12/18/05 (0)
• Truth in advertising award - Gordon 09:34:11 12/17/05 (1)
  • I don't know about that... - Trevor M 10:16:57 12/17/05 (0)
• Auto body forum?? - Chris Itterly 07:56:04 12/17/05 (5)
  • There's a lot there, should keep me busy, thx (nt) - Chris Itterly 08:15:17 12/17/05 (0)
  • Not a forum, but informative site. - Lars 08:04:17 12/17/05 (3)
    • Missed this one... also informative - Lars 08:06:55 12/17/05 (2)
      • I used Autobody 101 site for my resto... - Brian in Calgary 14:39:17 12/18/05 (0)
      • Sweet rotisserie blue print - Chris Itterly 08:22:53 12/17/05 (0)
• Electrical problems...suggestions please - Tom 03:12:21 12/17/05 (4)
  • Ignition switch - Remy Davison 04:58:36 12/17/05 (3)
    • Re: Ignition switch - dp 12:45:08 12/17/05 (0)
    • Re: Ignition switch - Tom in Pueblo 11:14:34 12/17/05 (0)
    • Re: Ignition switch - Tom 07:07:24 12/17/05 (0)
• 320i intake runners - Mike 23:56:24 12/16/05 (2)
  • Re: 320i intake runners - Pierre 08:12:19 12/17/05 (1)
    • Re: 320i intake runners - Mike 00:07:58 12/18/05 (0)
• Bumper question?? - ara 19:23:38 12/16/05 (2)
  • Re: Bumper question?? - T.Han 05:02:03 12/17/05 (1)
    • got it, thanks - ara 10:59:02 12/17/05 (0)
• Trip to local salvage yard... - Bill Hynes 18:16:38 12/16/05 (2)
  • Lets see... - Mike W. 19:29:28 12/16/05 (1)
    • Re: Lets see... - Bill Hynes 06:18:19 12/17/05 (0)
• Shifter disconnected - Cyndithia 16:03:31 12/16/05 (1)
  • Re: Shifter disconnected - Mike W. 22:54:14 12/16/05 (0)
• Looking to sell my BBS/Mahle wheels 14x7 - Adam Wilson in Chicago 14:53:41 12/16/05 (4)
  • I sold Adam those wheels! 225/60/14's, More... - Jeff Olson 11:05:45 12/17/05 (1)
    • more - Adam Wilson in Chicago 07:38:09 12/19/05 (0)
  • Re: Looking to sell my BBS/Mahle wheels 14x7 - Gordon 09:40:32 12/17/05 (0)
  • I've always admired those wheels Adam (nt) - Trevor M 15:31:01 12/16/05 (0)
• locked rear door - Patrick Lamb 14:17:21 12/16/05 (3)
  • Re: locked rear door - Tom in Pueblo 06:19:57 12/20/05 (0)
  • You should be able to remove the rear seat ... - Brian in Calgary 14:48:33 12/16/05 (1)
    • Good luck! - Damien in Brisbane 14:55:00 12/18/05 (0)
• Is anyone running BBS RA s? - Andrew in Chicago 13:51:09 12/16/05 (3)
  • From the factory on my '79 M535i special order... - Tulsa Dave 11:58:42 12/17/05 (1)
    • Exactly what i wanted to hear.!!Thanks :-) EOM - Andrew in Chicago 06:19:32 12/19/05 (0)
  • They should fit beautifully, no issues (nt) - Adam Wilson in Chicago 13:54:53 12/16/05 (0)
• Bad thermo? - jamie 13:07:00 12/16/05 (1)
  • Re: Bad thermo? - Peter Florance 13:37:32 12/16/05 (0)
• 1980 528i Flooding--ECU problem? - jamie 13:00:57 12/16/05 (2)
  • Re: 1980 528i Flooding--ECU problem? - Victor 11:23:25 12/19/05 (0)
  • did you try any of the previous suggestions? nt - eric in denver 17:56:23 12/16/05 (0)
• Water is dissapearing from reservoir, But Where? - Neck Smith 12:31:31 12/16/05 (1)
  • Look for hairline cracks... - Lenny D. 13:24:12 12/16/05 (0)
• got lucky - Karl in KS 11:34:03 12/16/05 (0)
• BBS RS 16x8 offset question?? - Andrew in chicago 08:31:42 12/16/05 (7)
  • Re: BBS RS 16x8 offset question?? - Bert-Ola Runeson 15:05:14 12/16/05 (2)
    • I believe slightly less room on an E12 - Eric Q 15:20:48 12/16/05 (1)
      • Thanks guys (nt) - Andrew 15:55:36 12/16/05 (0)
  • Re: BBS RS 16x8 offset question?? - Velocewest 11:50:09 12/16/05 (1)
    • what would i do without you Tony :-) new question! - Andrew 11:57:05 12/16/05 (0)
  • Re: BBS RS 16x8 offset question?? - bigperm206 10:13:02 12/16/05 (1)
    • BBS RS specific offset - Andrew in Chicago 11:34:30 12/16/05 (0)
• New to E12s but not new to BMWs - Pierre 19:08:03 12/15/05 (7)
  • also try a google search... - eric in denver 08:41:26 12/16/05 (0)
  • Re: New to E12s but not new to BMWs - Brett 22:21:17 12/15/05 (0)
  • Re: New to E12s but not new to BMWs - Velocewest 20:50:26 12/15/05 (4)
    • Tony..... - Mike in Lancaster 05:10:40 12/16/05 (0)
    • Thanks Tony. How about front sport seats from E28 - Pierre 22:14:45 12/15/05 (2)
      • maybe - Peter Florance 13:38:56 12/16/05 (1)
        • They should - Michael R from Melbourne 13:40:45 12/18/05 (0)
• overheating - Steve Giesecke 18:14:20 12/15/05 (5)
  • By the way... the block drain plug - Brian in Calgary 20:44:32 12/15/05 (0)
  • This just happened to me a bunch of posts ago... - Brian in Calgary 20:40:15 12/15/05 (3)
    • Re: This just happened to me a bunch of posts ago... - Steve G 21:51:24 12/15/05 (2)
      • Re: Tstat housing - Karl in KS 11:06:49 12/16/05 (0)
      • I'm not sure about the different housing.... - Brian in Calgary 07:21:31 12/16/05 (0)
• 80 528i being parted out - Gordon 18:00:01 12/15/05 (0)
• Flushing the Cooling System - Dan Lafley 11:53:00 12/15/05 (4)
  • Re: Flushing the Cooling System - Karl in KS 11:19:46 12/16/05 (0)
  • Re: Flushing the Cooling System - Bill Hynes 14:44:55 12/15/05 (2)
    • Re: Flushing the Cooling System - Fred Fermin (SF,CA) 21:23:07 12/15/05 (0)
    • Re: Flushing the Cooling System - T.Hanson 16:16:04 12/15/05 (0)
• Euro M30 (missing head) - Peachee in SF 10:46:50 12/15/05 (0)
• What's the Best Spark Plug for an e-12 ? - Jaime Obando 10:09:54 12/15/05 (15)
  • Re: What's the Best Spark Plug for an e-12 ? - here you go . site included :-) 10:39:01 12/15/05 (3)
    • C'mon people, use the link function... - Velocewest 12:03:59 12/15/05 (1)
      • Correcting myself - Velocewest 12:17:07 12/15/05 (0)
    • Name for post above! sorry (eom) - Andrew in Chicago 10:39:45 12/15/05 (0)
  • I used Bosch Silbers.... - Brian in Calgary 10:27:35 12/15/05 (10)
    • No on BOSCH Platinum plugs?? - Bill Hynes 14:49:19 12/15/05 (5)
      • Not for E12s, IMHO - Troy Rudolph 15:25:36 12/17/05 (0)
      • Platinum works well on cars designed for them but. - Pierre 22:42:51 12/15/05 (0)
      • WR9DS - BangkokMike 21:31:46 12/15/05 (1)
        • Sorry this is number for Silbers (nt).. - BangkokMike 22:40:42 12/22/05 (0)
      • Some people successfully use them, but the - Lars Olbimmerguy 16:04:06 12/15/05 (0)
    • Why do you like them Silvers? - Jaime Obando 11:22:32 12/15/05 (3)
      • Re: Why do you like them Silvers? - Walt Barie 13:46:28 12/15/05 (0)
      • Re: Why do you like them Silvers? - Velocewest 12:09:03 12/15/05 (0)
      • Re: Why do you like them Silvers? - T.Hanson 11:57:29 12/15/05 (0)
• Convert from Water AAV to Electric AAV - BangkokMike 00:13:58 12/15/05 (4)
  • Thanks! (nt) - BangkokMike 21:43:02 12/15/05 (0)
  • Checked further into Archives...Yikes! - BangkokMike 01:50:06 12/15/05 (2)
    • As Senor Wences used to say... - Peter Florance 04:39:25 12/15/05 (1)
      • Re: As Senor Wences used to say... - T.Hanson 10:34:46 12/15/05 (0)
• Need Aux Air Valve for 3.3 L-jet, non-electric - Bangkok Mike 23:52:28 12/14/05 (2)
  • Clean? - Lou in Denver 07:24:02 12/15/05 (1)
    • Clean it.. & Lube it. . - Jaime Obando 09:54:53 12/15/05 (0)
• Fan Clutch - please explain.... - Brian in Calgary 22:03:26 12/14/05 (9)
  • Seized fan clutch is bad because.... - Trevor M 07:36:59 12/15/05 (3)
    • Small addition - Chris Itterly 07:45:40 12/17/05 (0)
    • Sounds like I should change this then.... - Brian in Calgary 10:18:32 12/15/05 (1)
      • Re: Sounds like I should change this then.... - Trevor M 14:00:56 12/15/05 (0)
  • Re: Fan Clutch - please explain.... - Velocewest 22:15:17 12/14/05 (4)
    • Sometimes... - Mike W. 22:27:20 12/14/05 (3)
      • Good to know, Mike - Velocewest 12:14:00 12/15/05 (2)
        • You remember those things too? - Mike W. 17:11:28 12/15/05 (1)
          • Re: You remember those things too? - Velocewest 20:31:29 12/15/05 (0)
• 5er Fest Test and Tune on Friday - Peter Florance 15:18:49 12/14/05 (0)
• 320i intake runners? - Micah 15:00:03 12/14/05 (2)
  • I think there are some on flee bay under E12 bmw - Andrew 06:20:24 12/15/05 (0)
  • Technical FAQ - Velocewest 15:13:29 12/14/05 (0)
• Dexron II vs Dexron III - Brian in Calgary 12:29:52 12/14/05 (6)
  • Thanks Guys... Always the best advice (nt) - Brian in Calgary 19:48:01 12/14/05 (0)
  • Re: Dexron II vs Dexron III - Jim Hineline 15:15:21 12/14/05 (2)
    • Re: Dexron II vs Dexron III - T.Hanson 17:58:15 12/14/05 (1)
      • Re: Dexron II vs Dexron III - Jim Hineline 08:24:27 12/16/05 (0)
  • Re: Dexron II vs Dexron III - Daniel H 14:35:34 12/14/05 (1)
    • Re: Dexron II vs Dexron III - Peter Florance 15:12:41 12/14/05 (0)
• Window seal sourcing - Medly 11:51:37 12/14/05 (3)
  • like these on ebay? - KenB 20:51:28 12/14/05 (1)
    • linky - Velocewest 21:55:29 12/14/05 (0)
  • Dealer, or someone like Steve Haygood (nt) - Velocewest 12:04:04 12/14/05 (0)
• Charcoal Canister - Dan Lafley 08:08:16 12/14/05 (7)
  • Re: Charcoal Canister - Velocewest 12:00:48 12/14/05 (4)
    • I disagree - Mike W. 17:11:07 12/14/05 (3)
      • I'm pretty sure e12's have vented cap - Velocewest 22:04:58 12/14/05 (2)
        • Nope... - Mike W. 17:09:06 12/15/05 (1)
          • I run the canister - Velocewest 20:37:10 12/15/05 (0)
  • Re: Charcoal Canister - jimh 11:18:14 12/14/05 (1)
    • Re: Charcoal Canister - Carl-Seattle 18:51:43 12/14/05 (0)
• Shell Optmax Extreme (100 octane) - Tim from Aus (ACT) 22:13:11 12/13/05 (1)
  • Not recommended - Remy Davison 23:34:02 12/13/05 (0)
• Convert to H4 headlight - Jamie Seattle 20:59:29 12/13/05 (8)
  • Great Upgrade - Eddie in TO 08:05:48 12/14/05 (1)
    • Incorrigible Bastid! (nt) - Velocewest 15:17:09 12/14/05 (0)
  • Always - Velocewest 23:15:55 12/13/05 (2)
    • Re: Always - Jamie Seattle 09:36:01 12/14/05 (1)
      • Re: Always - Velocewest 12:05:23 12/14/05 (0)
  • Years ago, much better lighting - Mike W. 22:02:56 12/13/05 (2)
    • which ones...I'm in! - eric in denver 20:53:06 12/14/05 (1)
      • Easiest path - Velocewest 12:00:31 12/15/05 (0)
• Gas Lines replaced! Dang that's a b@#ch - Tom 17:14:14 12/13/05 (1)
  • I left my fuel filter connected..... - M. Keehn 17:19:24 12/14/05 (0)
• 1980 528I ---Flooding won't start - jamie 16:01:34 12/13/05 (10)
  • get rid of your cold start ! - Jaime Obando 12:05:23 12/14/05 (3)
    • Re: get rid of your cold start ! - Peter Florance 15:13:43 12/14/05 (2)
      • Re: get rid of your cold start ! - Lou in Denver 07:18:38 12/15/05 (1)
        • I got rid of mine, car started fine below 20 - Neck Smith 10:07:52 12/15/05 (0)
  • Re: 1980 528I ---Flooding won't start - D. 09:16:20 12/14/05 (0)
  • Re: 1980 528I ---Flooding won't start - Peter Florance 20:12:49 12/13/05 (0)
  • mine did that...was cold start valve....... - eric in denver 19:25:02 12/13/05 (0)
  • If it won't start - Mike W. 17:39:57 12/13/05 (1)
    • AGREED -- Fuel Pressure Regulator - John in Simi Valley 21:49:36 12/14/05 (0)
  • Re: 1980 528I ---Flooding won't start - Tom 17:08:00 12/13/05 (0)
• Run to Canberra (Australia) in January? - Michael R from Melbourne 14:43:13 12/13/05 (3)
  • Run to HERE! (Australia) in January? - Tim from Aus (ACT) 22:02:58 12/13/05 (2)
    • Not a lot a positive feedback on that one - Michael R from Melbourne 14:46:43 12/15/05 (1)
      • Re: Not a lot a positive feedback on that one - Tim from Aus (ACT) 16:37:49 12/17/05 (0)
• Got the heat inside now instead of outside! (long) - Brian in Calgary 10:10:33 12/13/05 (5)
  • what kind of coolant did you use Brian? (nt) - Adam Wilson in Chicago 12:22:30 12/13/05 (4)
    • I cheated.... Prestone - Brian in Calgary 19:55:22 12/13/05 (3)
      • Don't worry about it - Velocewest 23:17:26 12/13/05 (2)
        • unless you dropped big money on a rebuild - Adam Wilson in Chicago 10:49:51 12/14/05 (1)
          • And I did not... and don't plan on... - Brian in Calgary 12:25:57 12/14/05 (0)
• Salvage yards in FL? - Bill Hynes 08:52:13 12/13/05 (2)
  • Miss the snow yet?? - papajimmm nh no bmw's 05:51:44 12/14/05 (1)
    • Re: Miss the snow yet?? - Bill Hynes 06:26:09 12/14/05 (0)
• Help with auto trans leak - Remy Davison 06:27:49 12/13/05 (3)
  • Was the car towed with rear wheels down, or - Lars Olbimmerguy 10:32:19 12/13/05 (2)
    • Sounds like a seal of some kind? - Michael R from Melbourne 13:59:19 12/13/05 (1)
      • Car wasn't towed - Remy Davison 23:28:44 12/13/05 (0)
• Snow capibility ... long - Brett 22:21:36 12/12/05 (9)
  • Blizzaks work like glue!! - Nathan in Spokane 16:01:42 12/13/05 (2)
    • And they squirm like a whore in a church - Adam Wilson in Chicago 17:36:45 12/13/05 (1)
      • yep...that right! And funny NT - Eric in denver 19:28:58 12/13/05 (0)
  • Re: Snow capibility ... long - seth 12:00:21 12/13/05 (1)
    • That's "steering with your foot" (nt) - Velocewest 13:00:08 12/13/05 (0)
  • Heeps... - AustinK 07:29:01 12/13/05 (0)
  • its all about the tires! - eric in denver 06:52:53 12/13/05 (1)
    • Re: its all about the tires! - Brett 08:33:46 12/13/05 (0)
  • Snow - Mike W. 22:34:29 12/12/05 (0)
• Are we headed for extinction??? - Al from Oz 20:51:12 12/12/05 (11)
  • Re: Are we headed for extinction??? - james melb 05:24:25 12/15/05 (0)
  • See at least one daily. - doninportland 17:27:27 12/14/05 (0)
  • History repeating itself - Al from Oz 18:55:59 12/13/05 (0)
  • Re: Are we headed for extinction??? - Trevor M 18:23:24 12/13/05 (0)
  • Re: Are we headed for extinction??? - stewart in slc 15:04:06 12/13/05 (0)
  • Just an endangered species Al (The vet from Oz) - Michael R from Melbourne 14:15:09 12/13/05 (1)
    • Spot on guess! nt - Al from Oz 18:58:11 12/13/05 (0)
  • Actually, saw a really nice one - Remy Davison 06:33:14 12/13/05 (0)
  • Re: Are we headed for extinction??? - Tim from Aus (ACT) 21:46:03 12/12/05 (0)
  • Re: Are we headed for extinction??? - jimh 21:33:30 12/12/05 (0)
  • Re: Are we headed for extinction - I am - Carl-Seattle 21:15:35 12/12/05 (0)
• Selling another E12...with good reason... - Eric Q 20:36:30 12/12/05 (0)
• alternator frustrations (longish) - KenB 20:32:00 12/12/05 (3)
  • A note on resolution - KenB 12:07:12 12/13/05 (2)
    • 1 word is worth 1/1000 of a picture - Peter Florance 04:47:12 12/15/05 (1)
      • Re: 1 word is worth 1/1000 of a picture - KenB 12:05:50 12/15/05 (0)
• Zane's Turbo E12 in upcoming British BMW Mag - Adam Wilson in Chicago 18:02:55 12/12/05 (2)
  • Re: Zane's Turbo E12 in upcoming British BMW Mag - Kaveman 23:03:37 12/12/05 (0)
  • Can't wait to see the article! - Blair (Seattle) 22:29:19 12/12/05 (0)
• sludge cleanup, engine detailing suggestion - jimh 17:50:52 12/12/05 (0)
• WTB: Front Top Timing Cover - Klaus 17:47:12 12/12/05 (0)
• 1991 GMC Sonoma 15 5 speed - Rickie Riggs 16:04:33 12/12/05 (0)
• 1991 GMC Sonoma 15 5 speed - Rickie Riggs 16:03:39 12/12/05 (1)
  • Re: 1991 GMC Sonoma 15 5 speed - JimH 17:09:03 12/12/05 (0)
• Hello, future neighbors in IL - Tom in pueblo 09:46:32 12/12/05 (12)
  • Update: If we can afford it, we will be there!!(nt - Tom in pueblo 13:27:53 12/12/05 (1)
    • Good deal! - Patrick McHugh 00:17:49 12/13/05 (0)
  • Welcome Tom. I got an idea!! - Andrew 10:16:58 12/12/05 (3)
    • Lmao, but she knows cars too. (nt) - Tom in pueblo 10:19:09 12/12/05 (2)
      • Didnt mean to get you in trouble :-) - Andrew in Chicago 10:44:57 12/12/05 (1)
        • Re: Didnt mean to get you in trouble :-) - Tom in pueblo 13:26:21 12/12/05 (0)
  • I still can't make 5er Fest!! - Tom in pueblo 10:07:33 12/12/05 (3)
    • Holy smokes, I have the same issue...Bday that is - Eddie in TO 11:54:46 12/12/05 (0)
    • You can do both, bring her along! - Adam Wilson in Chicago 10:10:39 12/12/05 (1)
      • Re: You can do both, bring her along! - Tom in pueblo 10:17:43 12/12/05 (0)
  • Bring some warm weather with you ... PLEASE!! nt - Adam Wilson in Chicago 10:04:45 12/12/05 (1)
    • Re: Bring some warm weather with you ... PLEASE!! - Tom in pueblo 10:09:10 12/12/05 (0)
• Wiring Problems - Temp Gauge - dp in Yosemite CA 02:21:28 12/12/05 (3)
  • Re: Wiring Problems - Temp Gauge - Carl-Seattle 08:45:27 12/12/05 (0)
  • A very specific question to you.... - Lars Olbimmerguy 08:37:08 12/12/05 (1)
    • Re: A very specific question to you.... - dp 12:59:34 12/12/05 (0)
• Cheap parts .... and playing with the big boys - Adam Wilson in Chicago 20:51:42 12/11/05 (2)
  • Slight correction... for that price I bought - Lars OBG 21:34:27 12/11/05 (1)
    • Re: Slight correction... for that price I bought - Daniel H 22:07:39 12/11/05 (0)
• Oil Pan Gasket Replacement-1980 528I - RobertB 16:28:28 12/11/05 (1)
  • Re: Oil Pan Gasket Replacement-1980 528I - T.Hanson 20:42:08 12/11/05 (0)
• Super nice 528i for sale in Tacoma WA - Medly 13:24:35 12/11/05 (3)
  • Here's same car in today Craigslist for $200 more - Gordon 18:44:13 12/11/05 (2)
    • Re: Here's same car in today Craigslist for $200 more - Carl-Seattle 19:54:45 12/11/05 (1)
      • my mistake on the price... - Medly 23:11:29 12/11/05 (0)
• Hello, new here... - AustinK 13:16:38 12/11/05 (3)
  • Re: Hello, new here... - Tom in pueblo 10:13:42 12/12/05 (2)
    • Got a pic up... - AustinK 07:13:57 12/13/05 (0)
    • Re: Hello, new here... - AustinK 07:11:49 12/13/05 (0)
• CA E12's for sale - Gordon 10:37:21 12/11/05 (0)
• Back-up lights etc. - Kim Rosing-Asvid 07:35:52 12/11/05 (2)
  • Contact cleaner - Mike W. 10:44:14 12/11/05 (1)
    • Thanks Mike, will try it out. nt. - Kim Rosing-Asvid 06:36:24 12/15/05 (0)
• Alpina track car..... - Tim from Aus 03:58:47 12/11/05 (14)
  • Re: Alpina track car..... - Peter Florance 04:27:38 12/13/05 (2)
    • try Noltecs ... better than KMacs also ... - Kez 20:05:23 12/23/05 (0)
    • Kmacs - peter mooney 09:52:40 12/13/05 (0)
  • Re: Alpina track car..... - James (Tasmania) 16:14:36 12/12/05 (2)
    • Transmission for sale in Perth - Tim from Aus (ACT) 02:49:02 12/14/05 (1)
      • Re: Transmission for sale in Perth - James (Tasmania) 17:55:29 12/14/05 (0)
  • Re: Alpina track car..... - peter mooney 06:01:50 12/11/05 (7)
    • Re: Alpina track car..... - Tim from Aus 12:15:09 12/11/05 (6)
      • Hi Tim - Michael R from Melbourne 14:24:00 12/11/05 (5)
        • Re: Hi Tim - Tim from Aus (ACT) 21:36:18 12/11/05 (4)
          • Rebuilding Bilsteins - Michael R from Melbourne 14:30:40 12/12/05 (3)
            • Re: Rebuilding Bilsteins - Tim from Aus (ACT) 22:36:42 12/12/05 (2)
              • Photo's - Michael R from Melbourne 14:38:46 12/13/05 (1)
                • Yeah chunk-o-rama Alpina - Tim from Aus (ACT) 21:51:55 12/13/05 (0)
• Just when you question the value of an E12 - Carl-Seattle 20:25:29 12/10/05 (4)
  • Re: Just when you question the value of an E12 - Daniel H 20:43:00 12/10/05 (3)
    • Re: Just when you question the value of an E12 - Carl-Seattle 17:13:18 12/11/05 (2)
      • What's a "Pagoda" SL? - Blair (Seattle) 22:35:35 12/12/05 (1)
        • Merc 2 seater from 60's, early 70's - Velocewest 08:56:18 12/13/05 (0)
• Need a rear cross member - peter mooney 15:13:11 12/10/05 (5)
  • Re: Need a rear cross member - Daniel H 16:38:00 12/10/05 (4)
    • is a Bavaria xmember the same as an e12? - peter mooney 06:09:57 12/11/05 (3)
      • real oem lists different part numbers. - stewart in slc 14:28:16 12/11/05 (2)
        • Is it an e12? - Peter Mooney 05:53:54 12/12/05 (0)
        • Re: real oem lists different part numbers. - Daniel H 15:16:10 12/11/05 (0)
• Christmas came early - Trevor M 14:59:30 12/10/05 (1)
  • Don't you just love it - Velocewest 18:16:02 12/10/05 (0)
• This could be fun - Velocewest 10:28:57 12/10/05 (2)
  • Re: This could be fun - peter mooney 11:42:13 12/10/05 (1)
    • Group buy, anyone?(nt) - Tom in pueblo 13:46:36 12/10/05 (0)
• Calling Nick in Folsom... - Eric Q 16:34:18 12/09/05 (0)
• another differential alternative - peter mooney 11:25:52 12/09/05 (3)
  • What car did the Audi diff come from? - Medly 13:03:42 12/09/05 (2)
    • Well not exactly - peter 07:07:41 12/10/05 (0)
    • Re: What car did the Audi diff come from? - Mike 20:59:25 12/09/05 (0)
• ANTS!! - Bill Hynes 10:09:01 12/09/05 (11)
  • Re: ANTS!! - Don in NJ 10:43:24 12/10/05 (0)
  • Re: ANTS-the fix ! - Carl-Seattle 21:47:51 12/09/05 (0)
  • Re: ANTS!! - Cyndithia 17:35:12 12/09/05 (0)
  • Re: ANTS!! - Tom 15:04:44 12/09/05 (0)
  • Re: ANTS!! - T.Hanson 12:44:21 12/09/05 (0)
  • Squirrels!!!!!! - Lars Obg 10:33:00 12/09/05 (5)
    • hornets nest - papajimmm nh 11:26:15 12/09/05 (4)
      • Dieter the Mouse ? - Carl-Seattle 15:37:00 12/09/05 (3)
        • Hey, that's my E34!!! - M. Keehn 11:24:51 12/10/05 (2)
          • He's a celebrity now ! That has to be the - - Carl-Seattle 14:33:00 12/10/05 (1)
            • lol, thanks. - M. Keehn 15:51:05 12/10/05 (0)
• Decent small tail light E12 in Pennsylvania - Adam Wilson in Chicago 10:08:14 12/09/05 (2)
  • Re: Decent small tail light E12 in Pennsylvania - Larry Mills 12:26:52 12/13/05 (1)
    • Re: Decent small tail light E12 in Pennsylvania - Larry Mills 12:31:24 12/13/05 (0)
• Saw an E12 in the yard, going harvesting tomorrow - rexmo 09:47:15 12/09/05 (5)
  • The difference in location - Mike W. 19:55:47 12/09/05 (4)
    • Re: The difference in location - Velocewest 10:33:41 12/10/05 (3)
      • That's right... Last time I was at Bend Salvag - Lars 12:19:08 12/10/05 (2)
        • Don't worry Lars - Velocewest 18:15:09 12/10/05 (0)
        • No.... no 265GR's and Not a euro in the bunch - Lars..... 12:20:24 12/10/05 (0)
• E28 engine swap - Antonio Barbanente 09:24:12 12/09/05 (6)
  • Bell Housing for Motronics - John in Simi Valley 01:19:46 12/13/05 (0)
  • Re: E28 engine swap - Velocewest 18:21:38 12/10/05 (0)
  • Re: E28 engine swap - Karl in KS 09:23:43 12/10/05 (3)
    • E28 oil pan will work fine with new motor mounts - Medly 11:47:11 12/11/05 (2)
      • Re: E28 oil pan will work fine with new motor mounts - Patrick McHugh 16:14:56 12/11/05 (1)
        • Just brand new E12 motor mounts - Medly 23:18:12 12/11/05 (0)
• anyone in Boston are need used snow tires - papajimmm NH 07:48:16 12/09/05 (1)
  • should be Boston AREA (nt) - papjimmm nh 07:49:18 12/09/05 (0)
• Map of Members is up! - (Attention all Aussies) - Michael R from Melbourne 18:01:32 12/08/05 (5)
  • Re: Map of Members is up! - (Attention all Aussies - james 18:42:39 12/08/05 (4)
    • Hi James - Michael R from Melbourne 18:09:12 12/10/05 (0)
    • Link for the Frapper map? - Aaron from Aus 01:30:05 12/09/05 (1)
      • Re: Link for the Frapper map? - Damien in Brisbane 20:49:19 12/09/05 (0)
    • Link for the Frapper map? - Aaron from Aus 01:29:41 12/09/05 (0)
• m30 3.5 performance rebuild - Jamie Seattle 17:53:51 12/08/05 (19)
  • M50 or M52 engines - Zolka 01:02:36 12/10/05 (1)
    • Re: M50 or M52 engines - peter mooney 07:15:03 12/10/05 (0)
  • Just curioius, but why a M30 into a 2002? - Frank H 11:07:12 12/09/05 (6)
    • Re: Just curioius, but why a M30 into a 2002? - Jamie P Lyon 11:34:14 12/09/05 (5)
      • Re: Just curioius, but why a M30 into a 2002? - peter mooney 07:12:58 12/10/05 (4)
        • Re: Just curioius, but why a M30 into a 2002? - Velocewest 10:39:40 12/10/05 (3)
          • Re: Just curioius, but why a M30 into a 2002? - peter mooney 11:55:18 12/10/05 (2)
            • I want to see this dyno sheet. - TCD 15:02:13 12/10/05 (1)
              • Re: I want to see this dyno sheet. - Peter Mooney 15:05:23 12/10/05 (0)
  • Couple of more things... - peter mooney 11:05:22 12/09/05 (1)
    • Re: Couple of more things... - Jamie Seattle 11:38:02 12/09/05 (0)
  • Re: m30 3.5 performance rebuild - peter mooney 20:35:51 12/08/05 (7)
    • Re: m30 3.5 performance rebuild - Jamie P Lyon 22:21:25 12/08/05 (2)
      • Re: m30 3.5 performance rebuild - peter mooney 10:50:04 12/09/05 (1)
        • That's "Olsen Engines" not engineering - peter mooney 10:57:14 12/09/05 (0)
    • Re: m30 3.5 performance rebuild - Velocewest 21:55:40 12/08/05 (3)
      • Re: m30 3.5 performance rebuild - peter mooney 10:54:18 12/09/05 (0)
      • Poor 2002 - Will Ollison 08:18:50 12/09/05 (0)
      • Poor 2002 - Will Ollison 08:18:31 12/09/05 (0)
• looking for E 12 ash tray - james heaney 17:25:53 12/08/05 (0)
• WTB E12 RF Door Lock Actuator - David in Eureka, CA 14:24:11 12/08/05 (0)
• Low beam non-op - passenger side - Mike 12:11:52 12/08/05 (3)
  • Re: Low beam non-op - passenger side - Karl in KS 09:32:03 12/10/05 (0)
  • Re: Low beam non-op - passenger side - Daniel H 16:54:24 12/08/05 (1)
    • Happened to me as well - Remy Davison 06:08:58 12/09/05 (0)
• cold start on 1980528i - jamie 10:04:47 12/08/05 (4)
  • Long shot - Mike W. 19:40:53 12/08/05 (0)
  • fuel pressure? Spark fires? How did it died? - Jaime Obando 19:22:57 12/08/05 (0)
  • Try again - Craig in Davis 18:42:05 12/08/05 (1)
    • Re: Try again - jamie 08:18:27 12/13/05 (0)
• o2 sensor purpose? - mik 00:29:17 12/08/05 (3)
  • Today is 2-fer-1 day! - Peter Florance 04:42:56 12/08/05 (2)
    • And ... - Troy Rudolph 11:59:45 12/08/05 (1)
      • Re: And ... - mik 14:17:25 12/12/05 (0)
• bbs front spoiler........... - jim@dashop 15:21:05 12/07/05 (5)
  • Re: bbs front spoiler........... - jim@dashop 10:04:36 12/08/05 (1)
    • Not a Problem. excellent example - Lars 10:31:31 12/08/05 (0)
  • Re: bbs front spoiler...........Negative Feedback - Tom Masters 15:25:45 12/07/05 (2)
    • Teaching eBay, I tell people to stay away from - Lars Olbimmerguy 16:34:38 12/07/05 (1)
      • Yep. Didn't bid for that reason: Lousy Feedback - Misha 08:34:07 12/08/05 (0)
• Two e12 FS - Bryan Carpenter 09:56:52 12/07/05 (3)
  • where in the US are you? - Jaime Obando 20:34:35 12/07/05 (1)
    • read post...Atlanta GA (NT) - eric in denver 21:58:54 12/07/05 (0)
  • check your email..(nt) - Ryan Bryan 18:36:04 12/07/05 (0)
• Stebro exhaust - Jamie Seattle 09:43:12 12/07/05 (6)
  • Put lots of them on VW's.... - Al Canuck 16:27:38 12/07/05 (0)
  • Re: Stebro exhaust - Mike 12:21:26 12/07/05 (1)
    • Re: Stebro exhaust - Jamie Seattle 15:33:03 12/07/05 (0)
  • Re: Stebro exhaust - Eddie in TO 11:15:26 12/07/05 (2)
    • Re: Stebro exhaust - Eddie in TO 13:55:24 12/07/05 (1)
      • Re: Stebro exhaust - Will Ollison 16:48:05 12/07/05 (0)
• Cold Blooded in the Morning - Klaus 07:07:22 12/07/05 (6)
  • Some updates... - Klaus 17:54:48 12/08/05 (1)
    • Thanks for the update, wish I had access to a - Craig in Davis 18:52:44 12/08/05 (0)
  • Thanks Guys - Klaus 07:27:11 12/08/05 (0)
  • Some possibilities - Mike W. 18:33:25 12/07/05 (0)
  • List of Possible Trouble shooting Brainstorm. - Andres Moreno 09:24:23 12/07/05 (0)
  • Re: Cold Blooded in the Morning - Trevor M 07:40:37 12/07/05 (0)
• drove 5 years with bad cold injector, didn't know- - Andres Moreno 03:30:41 12/07/05 (7)
  • the injector fails to shut down completely - Jaime Obando 07:38:58 12/07/05 (0)
  • Re: drove 5 years with bad cold injector, didn't k - Fred Fermin (SF, Ca) 03:44:44 12/07/05 (5)
    • Remove injector and crank car, injector - Craig in Davis 07:29:25 12/07/05 (4)
      • Mine leaked gas even after the car warmed up !!! - Jaime Obando 07:37:31 12/07/05 (3)
        • How would you test for that? - Michael R from Melbourne 15:54:26 12/07/05 (2)
          • it should only spray during cranking and - Craig in Davis 06:51:28 12/08/05 (1)
            • I'll try that test thanks Craig - Michael R from Melbourne 17:16:31 12/08/05 (0)
• battery wiring help - dp 03:10:56 12/07/05 (3)
  • You need to resize the picture - Mike W. 20:12:29 12/07/05 (0)
  • Wise to wait and ask - - Carl-Seattle 09:14:32 12/07/05 (0)
  • Re: battery wiring help - dp 03:15:44 12/07/05 (0)
• looking for '81 528i w/ 5spd - Nick in Ottawa 20:44:58 12/06/05 (4)
  • if you want to drive to Toronto... - Eddie in TO 06:29:34 12/07/05 (3)
    • More info if you have it! - Dale 18:32:04 12/07/05 (1)
      • email sent - Eddie in TO 08:38:11 12/08/05 (0)
    • Toronto's okay - Nick in Ottawa 10:08:26 12/07/05 (0)
• Just as I fix one thing.... - Brian in Calgary 16:37:22 12/06/05 (13)
  • I would drain and flush that Dexcool stuff - Adam Wilson in Chicago 10:02:50 12/07/05 (1)
    • Ditto... - Lenny D. 10:59:46 12/07/05 (0)
  • Found this "feel better" post on Roadfly e24 - Lars Olbimmerguy 18:58:27 12/06/05 (1)
    • Thanks Lars... you always make me smile - Brian in Calgary 22:06:21 12/07/05 (0)
  • Re: Just as I fix one thing.... - Trevor M 17:26:44 12/06/05 (5)
    • agree - Daniel H 19:31:00 12/06/05 (4)
      • Don't think it is an airlock... - Brian in Calgary 12:03:09 12/07/05 (3)
        • BMW coolant = about $20/jug, you'll need 2 (nt) - Adam Wilson in Chicago 13:19:05 12/07/05 (0)
        • Re: Don't think it is an airlock... - Trevor M 13:03:17 12/07/05 (1)
          • I don't think so... - Brian in Calgary 15:19:14 12/07/05 (0)
  • Re: Just as I fix one thing.... - Michael R from Melbourne 17:14:55 12/06/05 (0)
  • How long ago did you replaced your thermostat. - Jaime Obando 17:05:38 12/06/05 (1)
    • Flushed about 2 months ago - Brian in Calgary 22:03:37 12/07/05 (0)
• do a pair of 528i equal 1 535i? - Rich 15:02:36 12/06/05 (2)
  • Trick question - Mike W. 21:24:44 12/06/05 (0)
  • Re: do a pair of 528i equal 1 535i? - Velocewest 17:42:04 12/06/05 (0)
• It's running again!! - Bill Hynes 13:21:47 12/06/05 (1)
  • Re: It's running again!! - Tom 16:57:33 12/06/05 (0)
• What you guys didn't know - BAD Cold Injector !!!! - Jaime Obando 12:35:46 12/06/05 (4)
  • Get rid of my cold injector-dont need it in Texas! - Neck Smith 20:00:31 12/06/05 (0)
  • Re: What you guys didn't know - BAD Cold Injector !!!! - Tom 16:59:10 12/06/05 (0)
  • well...dummies, - eric in denver 14:54:00 12/06/05 (1)
    • Leaking Cold Start Injector - Jaime Obando 16:58:53 12/06/05 (0)
• Rebuilt M30 engine for sale - Gordon 07:10:37 12/06/05 (0)
• charging - KenB 22:58:22 12/05/05 (6)
  • RESULTS... - KenB 15:08:15 12/06/05 (4)
    • Re: RESULTS... - D. 15:48:35 12/11/05 (0)
    • Re: RESULTS... - Trevor M 17:42:09 12/06/05 (2)
      • bad regulator could couse light not to come on? NT - KenB 20:07:46 12/06/05 (1)
        • Yes it can - Mike W. 20:31:52 12/06/05 (0)
  • Re: charging - Trevor M 04:59:22 12/06/05 (0)
• FYI BBS airdam on ebay...1 day left NT - eric in denver 21:49:03 12/05/05 (3)
  • Re: FYI BBS airdam on ebay...1 day left NT - NC Doug 03:45:55 12/06/05 (0)
  • Re: FYI BBS airdam on ebay...1 day left NT - frank faisal 00:07:42 12/06/05 (1)
    • Re: FYI BBS airdam on ebay...1 day left NT - T.Hanson 19:35:11 12/06/05 (0)
• Noisy but working fuel pump - Jaime Obando 19:46:58 12/05/05 (3)
  • Re: Noisy but working fuel pump - D. 15:43:36 12/11/05 (0)
  • Re: Noisy but working fuel pump - greghill-phx,az 00:20:33 12/06/05 (0)
  • Re: Noisy but working fuel pump - Mike W. 22:25:12 12/05/05 (0)
• Strange spark plug problem... - Bill Hynes 14:45:26 12/05/05 (6)
  • Re: Strange spark plug problem... - Lenny D. 15:30:16 12/05/05 (5)
    • Re: Strange spark plug problem... - Bill Hynes 16:32:59 12/05/05 (4)
      • use a booger pick - Sam Schultz 18:51:17 12/05/05 (3)
        • Vacuum or pressure - :Mike W. 22:21:07 12/05/05 (2)
          • pressure - mik 00:02:10 12/08/05 (0)
          • Re: Vacuum or pressure - Trevor M 05:24:07 12/06/05 (0)
• Peter megasquirt help - marc79euro645 14:45:19 12/05/05 (2)
  • success, I have it idleing now!! - marc79euro645 19:02:03 12/06/05 (1)
    • keep us posted - Lou in Denver 19:36:43 12/06/05 (0)
• for those of you in TX (E12 for less than 450$) - Andrew in Chicago 14:28:23 12/05/05 (0)
• What does the cold injection thingie look like? - Don in NJ 10:40:07 12/05/05 (3)
  • Re: What does the cold injection thingie look like? - Tom Masters 13:02:05 12/05/05 (0)
  • Part # 18 in this diagram - Carl-Seattle 11:33:11 12/05/05 (1)
    • Re: Part # 18 in this diagram see link - Craig in Davis 17:28:04 12/05/05 (0)
• Understanding Wheel Offset - Eddie in TO 09:56:10 12/05/05 (8)
  • Re: Understanding Wheel Offset - peter mooney 12:28:19 12/05/05 (7)
    • An aftermarket Wheel/Tire option.......long - Eddie in TO 20:31:05 12/05/05 (0)
    • 22 offset in front? 13 rear? - Andrew 12:46:48 12/05/05 (5)
      • Re: 22 offset in front? 13 rear? - peter mooney 07:36:35 12/06/05 (0)
      • Here's a set for ya . . . - Bob/E12/6er 14:36:30 12/05/05 (3)
        • technical FAQ - Michael R from Melbourne 17:00:20 12/05/05 (2)
          • Re: technical FAQ - peter mooney 08:02:54 12/06/05 (0)
          • One more thing - Michael R from Melbourne 17:03:00 12/05/05 (0)
• 2 e12's by my house - Nigel 06:03:13 12/05/05 (3)
  • Re: 2 e12's by my house - Nigel 09:43:33 12/05/05 (0)
  • Most often, visible rust is 10-25% of total rust - Lars OBG 09:32:24 12/05/05 (0)
  • Unless there is somthing cool woth what the - Sam_Schultz 08:25:14 12/05/05 (0)
• anyone have dash cover for sale or.... - eric in denver 23:13:57 12/04/05 (4)
  • Re: anyone have dash cover for sale or.... - Lou in Denver 16:17:15 12/05/05 (0)
  • Re: anyone have dash cover for sale or.... - JoshInM3 06:13:29 12/05/05 (2)
    • Re: anyone have dash cover for sale or.... - Carl-Seattle 08:08:14 12/05/05 (1)
      • would prefer coverlay (ABS kind) but... - eric in denver 21:42:13 12/05/05 (0)
• A glimmer of hope... - Velocewest 22:45:48 12/04/05 (1)
  • Re: A glimmer of hope... - peter mooney 12:41:19 12/05/05 (0)
• 1978 530i Automatic (Considering Purchase) - Jeff 14:47:57 12/04/05 (5)
  • Re: 1978 530i Automatic (Considering Purchase) - Mike W. 20:05:58 12/04/05 (0)
  • Re: 1978 530i Automatic (Considering Purchase) - Daniel H 18:58:31 12/04/05 (3)
    • Actually the later heads - Velocewest 21:50:39 12/04/05 (2)
      • Re: Actually the later heads - Daniel H 14:05:06 12/05/05 (1)
        • Re: Actually the later heads - Velocewest 14:45:54 12/05/05 (0)
• six series bits on a five - simon mccarthy 22:55:37 12/03/05 (2)
  • Re: six series bits on a five - Remy Davison 04:18:47 12/04/05 (1)
    • Re: six series bits on a five - T.Hanson 11:03:49 12/04/05 (0)
• EURO BUMPERS - FRANK FAISAL 18:08:53 12/03/05 (6)
  • Someone here posted an invoice about a year - Lars Olbimmerguy 19:06:12 12/03/05 (1)
    • Lars, BMW lowered parts prices for many.... - Mike in Lancaster 05:07:21 12/06/05 (0)
  • dude...lose the capitol letters.......... - jim@dashop 18:17:26 12/03/05 (3)
    • Re: dude...lose the capitol letters.......... - frank faisal 11:34:15 12/05/05 (2)
      • No, but - Mike W. 22:10:26 12/05/05 (1)
        • Brian hooked me up with new Euro bumpers.... - Al Canuck 16:31:31 12/07/05 (0)
• fuse box changes - joe 13:07:45 12/03/05 (2)
  • Re: fuse box changes - Mike W. 21:33:33 12/04/05 (1)
    • Re: fuse box changes - joe 17:47:44 12/05/05 (0)
• Stolen E28 Reported on Craigslist-Seattle - Carl-Seattle 13:02:38 12/03/05 (0)
• Central locking controller - Craig in Davis 08:50:13 12/03/05 (5)
  • Are you bypassing normal body circuit - Lars Olbimmerguy 13:07:54 12/03/05 (2)
    • For testing I have the control unit removed - Craig in Davis 14:57:21 12/03/05 (1)
      • I googled how to test transistors. Both tested - Craig in Davis 17:37:23 12/04/05 (0)
  • check the lock motor faq - Velocewest 12:16:44 12/03/05 (1)
    • I read the FAQ but it only addresses the control - Craig in Davis 15:02:05 12/03/05 (0)
• loud whirring noise? - dan in new brunswick 07:17:39 12/03/05 (2)
  • sounds like a bearing - Sam Schultz 07:37:26 12/03/05 (1)
    • clutch seems to have no effect - Dan in N.B. 13:21:15 12/06/05 (0)
• Supplier for Mandrel Bent Exhausts in the Midwest - Rick 06:51:25 12/03/05 (0)
• 1981 528i 5spd for sale - $1500 - jason 22:54:23 12/02/05 (2)
  • Re: 1981 528i 5spd for sale - $1500 - jason s 10:58:48 12/03/05 (1)
    • Re: 1981 528i 5spd for sale - $1500 - nick 18:05:54 12/05/05 (0)
• ECU numbers? - eric in denver 21:54:21 12/02/05 (3)
  • there's an FAQ for almost everything - Peter Florance 05:48:44 12/03/05 (2)
    • More trivia - Mike W. 11:02:03 12/03/05 (0)
    • I did look... - eric in denver 06:45:43 12/03/05 (0)
• problem with parking lights etc. - Micah 16:28:49 12/02/05 (1)
  • Re: problem with parking lights etc. - Velocewest 11:31:53 12/04/05 (0)
• Electrical guru - Steve C. 06:52:56 12/02/05 (3)
  • Re: Electrical guru (not me) - Velocewest 12:13:04 12/03/05 (0)
  • Re: Electrical guru - JoshInM3 09:17:12 12/02/05 (1)
    • Re: Electrical guru - Steve C. 09:37:16 12/02/05 (0)
• paging Don Daynes re: roll cage - peter mooney 06:25:12 12/02/05 (3)
  • Re: paging Don Daynes re: roll cage - Still cold in Colorado... 19:53:40 12/02/05 (0)
  • Re: paging Don Daynes re: roll cage - Don Daynes 09:12:34 12/02/05 (1)
    • Re: paging Don Daynes re: roll cage - peter mooney 09:53:50 12/02/05 (0)
• 320i intake runners - Mike 01:04:45 12/02/05 (5)
  • they are the same, just longer - Andrew 06:25:03 12/05/05 (0)
  • Re: 320i intake runners - Patrick McHugh 12:42:55 12/03/05 (0)
  • Re: 320i intake runners - Daniel H 22:27:44 12/02/05 (0)
  • Re: 320i intake runners - Kevin Gailey 01:19:50 12/02/05 (1)
    • Re: 320i intake runners - Cool! - Mike 16:25:07 12/02/05 (0)
• 81 528i FS, 5 speed, $1200 - Gordon 00:57:27 12/02/05 (4)
  • I think this was for sale a while back... - eric in denver 06:32:27 12/02/05 (3)
    • It was posted awhile ago - Carl-Seattle 08:22:14 12/02/05 (2)
      • Yup - and here is the other pic - Carl-Seattle 08:33:09 12/02/05 (1)
        • message "no external linking please" (nt) - Adam Wilson in Chicago 09:18:16 12/02/05 (0)
• Battery Light - KenB 23:42:02 12/01/05 (3)
  • Re: Battery Light - Trevor M 18:09:41 12/02/05 (0)
  • Re: Battery Light - KenB 16:54:32 12/02/05 (1)
    • Re: Battery Light - Trevor M 17:30:00 12/02/05 (0)
• Oba! Fuse box info 1 - Velocwest 22:23:32 12/01/05 (3)
  • Oba! Fuse box info 2 - Velocewest 22:24:31 12/01/05 (2)
    • Oba! Fuse box info 3 - Velocewest 22:25:34 12/01/05 (1)
      • Re: Oba! Fuse box info 3 - Oba 02:45:41 12/02/05 (0)
• Paging Mike W. - Oba Biddeau 20:25:24 12/01/05 (2)
  • Re: Paging Mike W. - Mike W. 21:06:06 12/01/05 (1)
    • Re: Paging Mike W. - Oba Biddeau 21:10:25 12/01/05 (0)
• Cold weather and electrical problems - Tom (Highlands, NC) 17:24:17 12/01/05 (4)
  • Re: Cold weather and electrical problems - T.Hanson 21:08:34 12/01/05 (0)
  • Re: Cold weather and electrical problems - Carl 20:29:43 12/01/05 (0)
  • Re: Cold weather and electrical problems - Daniel H 18:46:38 12/01/05 (1)
    • Re: Cold weather and electrical problems - Tom 18:33:30 12/07/05 (0)
• 3.5 Swapped Tuning - Tito in Santa Clara 16:58:15 12/01/05 (5)
  • Re: 3.5 Swapped Tuning - Tito in Santa Clara 14:27:28 12/02/05 (0)
  • Hmmmm....sounds like..... - Cold in Colorado 05:07:42 12/02/05 (0)
  • further notes - Peter Florance 04:59:15 12/02/05 (0)
  • Re: 3.5 Swapped Tuning - Klaus 20:26:20 12/01/05 (0)
  • Re: 3.5 Swapped Tuning - Peter Florance 18:14:00 12/01/05 (0)
• Fender flares - Chris Itterly 16:46:35 12/01/05 (5)
  • Re: Fender flares - Troy Rudolph 14:05:52 12/02/05 (1)
    • Re: Fender flares - Chris Itterly 09:15:06 12/03/05 (0)
  • Re: Fender flares - peter mooney 05:59:05 12/02/05 (1)
    • Fiberglass laying reference - Chris Itterly 09:11:50 12/03/05 (0)
  • Re: Fender flares - Daniel H 18:43:23 12/01/05 (0)
• Looking for a 3.5 engine in TEXAS !! - Neck Smith 15:39:49 12/01/05 (0)
• 205-70R-14 Is this the right tire size - Jaime Obando in Bumpy Houston !! 15:38:03 12/01/05 (1)
  • It will work fine. - Eric Q 17:15:24 12/01/05 (0)
• rollbar - peter mooney 15:07:45 12/01/05 (2)
  • Re: rollbar - Daniel H 18:32:41 12/01/05 (1)
    • Re: rollbar - peter mooney 06:00:21 12/02/05 (0)
• Awesome "L" block power output - Adam Wilson in Chicago 12:38:05 12/01/05 (4)
  • Isn't that the guy in Iraq-- 15 cents a gallon - Lars OBG 13:28:06 12/01/05 (1)
    • Re: Isn't that the guy in Iraq-- 15 cents a gallon - peter mooney 14:40:39 12/01/05 (0)
  • Re: Awesome "L" block power output - peter mooney 13:02:10 12/01/05 (1)
    • Oops.. above for you Pete nt - Lars OBG 13:28:47 12/01/05 (0)
• E12 lowering springs for sale - Adam Wilson in Chicago 12:19:49 12/01/05 (2)
  • Re: E12 lowering springs for sale - T.Han 13:22:46 12/01/05 (1)
    • ST springs were about $184 (eom) - Andrew 13:40:53 12/01/05 (0)
• One full year on firstfives!!! - M. Keehn 08:20:14 12/01/05 (23)
  • Re: One full year on firstfives!!! - Eduardo 18:01:42 12/02/05 (0)
  • July, 1997 - ...tom 07:44:24 12/02/05 (0)
  • 8 years!!!!!!! - Troy Rudolph (Webmaster) 21:52:28 12/01/05 (1)
    • Re: 8 years!!!!!!! - Eddie in TO 05:49:11 12/02/05 (0)
  • July 1, 2003 first post - Brian in Calgary 21:50:00 12/01/05 (0)
  • about march 2004...before I got e12..to learn. nt - eric in denver 20:42:26 12/01/05 (0)
  • August 18, 2001... - Tulsa Dave 19:29:08 12/01/05 (0)
  • May 2003 was my first post. I had no idea it had - Craig in Davis 19:11:53 12/01/05 (0)
  • Not many longer than me.... - Bill Bowes 18:16:20 12/01/05 (2)
    • Excellent, now I can see .......... - Adam Wilson in Chicago 05:45:30 12/02/05 (0)
    • And I stumbled onto Greg's site... - Lenny D. 19:23:16 12/01/05 (0)
  • Looks like only June of 02 for me - Mike W. 17:54:16 12/01/05 (0)
  • my first post was June 8th 1999... - Ryan Bryan 15:01:00 12/01/05 (0)
  • what we really need is a history of First Fives - Peter Florance - First Fives Dictator for Life 12:27:08 12/01/05 (0)
  • Had to go back and check, June 2000 for me (nt) - Adam Wilson in Chicago 12:17:22 12/01/05 (0)
  • Time flies when you're having fun...since May '97 - Eddie in TO 11:42:42 12/01/05 (0)
  • Right after the first Fiver Fest-- 2001? (nt) - Brad In Texas 10:54:36 12/01/05 (0)
  • Re: One full year on firstfives!!! - Greg 10:39:31 12/01/05 (2)
    • That is fun to read through - Adam Wilson in Chicago 12:27:35 12/01/05 (1)
      • I remember when I was in high school.... - M. Keehn 13:37:41 12/01/05 (0)
  • March of 1997 (nt) - Mike in Lancaster 08:44:58 12/01/05 (0)
  • Since Aug of 2004 (eom) - Andrew in Chicago 08:28:32 12/01/05 (1)
    • Member since 1999, nt - Mark 09:58:18 12/01/05 (0)
• Has anybody used an e28 Hydraulic booster? - Patrick McHugh 07:27:27 12/01/05 (5)
  • Re: Has anybody used an e28 Hydraulic booster? - Peter Florance 18:19:22 12/01/05 (0)
  • Re: Has anybody used an e28 Hydraulic booster? - Patrick McHugh 18:13:07 12/01/05 (0)
  • Re: Has anybody used an e28 Hydraulic booster? - Big Dog 12:46:33 12/01/05 (0)
  • Not worth it in my opinion - Velocewest 12:12:36 12/01/05 (0)
  • Re: Has anybody used an e28 Hydraulic booster? - Troy Rudolph 08:46:05 12/01/05 (0)
• Parts needed - fuel rail - Allan A. 04:56:01 12/01/05 (1)
  • Re: Parts needed - fuel rail - jim@dashop 10:28:55 12/01/05 (0)
• need a 5-speed for a 92 3.5 going in my 78 530 - FRANK FAISAL 23:08:14 11/30/05 (1)
  • Re: need a 5-speed for a 92 3.5 going in my 78 530 - jim@dashop 06:41:17 12/01/05 (0)
• 5er Fest 2006 Registration Open! - Layton 21:22:09 11/30/05 (4)
  • Re: 5er Fest 2006 Registration Open! - Daniel H 19:32:18 12/01/05 (0)
  • Yup, first E12 M535i registered (nt) - Adam Wilson in Chicago 12:29:59 12/01/05 (0)
  • done! - Peter Florance 04:59:50 12/01/05 (1)
    • Ha! Beat you to it!!! (nt) - Eric Q 13:52:12 12/01/05 (0)
• Ode to winter - T.Han 21:11:39 11/30/05 (5)
  • Gosh T..... - Lars Olbimmerguy 21:15:52 11/30/05 (4)
    • Add one more to the list - Mike W. 22:08:54 11/30/05 (3)
      • Piece of Americana is in the Smithsonian - Lars OBG 10:12:40 12/01/05 (2)
        • Re: Piece of Americana is in the Smithsonian - T.Han 11:37:50 12/01/05 (1)
          • Stopped and spent a day there couple years ago - Lars OBG 13:26:39 12/01/05 (0)
• WWW.SEVBG.com - tacm 19:19:36 11/30/05 (1)
  • Congrats Steve. Welcome (eom) - Andrew 06:07:45 12/01/05 (0)
• Several E12's and parts for sale - Gordon 18:30:25 11/30/05 (1)
  • I looked at the Sacramento car before..... - Craig in Davis 18:55:10 11/30/05 (0)
• What stand "hi2" or "h12" for? - Gunnar Moller 13:56:09 11/30/05 (0)
• Fuse box Cover layout (78 530i) - Oba Biddeau 11:23:16 11/30/05 (5)
  • Re: Fuse box Cover layout (78 530i) - Velocewest 13:47:14 11/30/05 (1)
    • Sorry Oba - Velocewest 12:13:41 12/01/05 (0)
  • Re: Fuse box Cover layout (78 530i) - Big Dog 13:02:15 11/30/05 (2)
    • Re: Fuse box Cover layout (78 530i) - Oba Biddeau 13:20:05 11/30/05 (1)
      • Re: Fuse box Cover layout (78 530i) - dennist 21:28:44 11/30/05 (0)
• Which Distributor Rotor? - Bill Hynes 06:56:00 11/30/05 (3)
  • Re: Which Distributor Rotor? - Tom 07:59:38 11/30/05 (2)
    • Rev. Limit ? - Carl-Seattle 11:09:40 11/30/05 (0)
    • Thanks - Bill Hynes 08:03:33 11/30/05 (0)
• M535i - wrok nearly done..... - John Kyle 06:20:33 11/30/05 (2)
  • Re: M535i - wrok nearly done..... - Mike in Lancaster 04:41:24 12/01/05 (0)
  • Re: M535i - wrok nearly done..... - T.Hanson 11:42:56 11/30/05 (0)
• Body parts... - JoshInM3 21:19:54 11/29/05 (13)
  • Dealership - Eddie in TO 10:16:03 11/30/05 (0)
  • did you check the M535i airdam FAQ? nt - Adam Wilson in Chicago 08:22:02 11/30/05 (1)
    • Re: did you check the M535i airdam FAQ? nt - JoshInM3 10:52:26 11/30/05 (0)
  • Re: Body parts... - Brad In Texas 04:51:19 11/30/05 (0)
  • Re: Body parts... - Jamie Seattle 01:34:16 11/30/05 (2)
    • Max - Velocewest 09:34:26 11/30/05 (1)
      • Re: Max - brett 10:11:10 11/30/05 (0)
  • Re: Body parts... - Velocewest 22:04:43 11/29/05 (5)
    • oh oh oh waaaaiit....another opportunity to.... - Eddie in TO 10:12:08 11/30/05 (2)
      • I'm gonna toss you in that cold lake! (nt) - Velocewest 11:21:16 11/30/05 (1)
        • Brrrr Baby Brrrrrrrrrr!!! (nt) - Eddie in TO 14:09:20 11/30/05 (0)
    • Re: Body parts... - JoshInM3 06:40:23 11/30/05 (1)
      • I got the fenders through my local dealer (nt) - Velocewest 09:33:51 11/30/05 (0)
• 84 728i Euro spec, 5 speed FS - Gordon 19:30:04 11/29/05 (2)
  • Ah, from Europia! (nt) - Velocewest 21:50:17 11/29/05 (1)
    • LOL..your funny nt - Eric in denver 22:37:44 11/29/05 (0)
• Repairing a fuel leak - Allan A. 19:14:28 11/29/05 (2)
  • yes it can, but you should do all of them. - eric in denver 19:41:43 11/29/05 (0)
  • Re: Repairing a fuel leak - Bill Hynes 19:32:15 11/29/05 (0)
• Parts, Repairs? - Mike 12:54:17 11/29/05 (6)
  • Re: Parts, Repairs? - Peter Florance 18:29:04 11/29/05 (0)
  • Re: Parts, Repairs? - Trevor M 17:48:42 11/29/05 (0)
  • Look here... - Lenny D. 14:54:47 11/29/05 (0)
  • Re: Parts, Repairs? - Velocewest 13:06:09 11/29/05 (2)
    • Re: Parts, Repairs? - Mike 15:17:20 11/29/05 (1)
      • Re: Parts, Repairs? - Velocewest 15:42:04 11/29/05 (0)
• Car won't start - Bill Hynes 12:48:19 11/29/05 (12)
  • Re: Car won't start - Tom 13:35:27 11/29/05 (3)
    • Curses! I totally forgot the CSI... (nt) - Velocewest 16:13:22 11/29/05 (2)
      • Curses? You been watching Scooby-Doo? nt - Adam Wilson in Chicago 08:05:15 11/30/05 (1)
        • Shraggy? Izzat Ru? (nt) - Velocewest 09:52:39 11/30/05 (0)
  • Re: Car won't start - Velocewest 13:21:35 11/29/05 (7)
    • Here's what I found... - Bill Hynes 14:31:50 11/29/05 (3)
      • Re: Here's what I found... - Tom 20:07:12 11/29/05 (0)
      • Re: Here's what I found... - Velocewest 16:07:53 11/29/05 (1)
        • Re: Here's what I found... - Tom 20:09:18 11/29/05 (0)
    • FYI, the supply line is the one - Velocewest 13:22:37 11/29/05 (2)
      • Thanks for all the help... - Bill Hynes 06:37:18 11/30/05 (1)
        • Re: Thanks for all the help... - Tom 19:49:19 11/30/05 (0)
• My clutch pedal is down - Kevin 10:36:35 11/29/05 (1)
  • Re: My clutch pedal is down - Daniel H 20:07:56 11/29/05 (0)
• Paging: Velocewest - Misha 08:16:26 11/29/05 (3)
  • Re: Paging: Velocewest - Velocewest 12:30:27 11/29/05 (1)
    • OK. Thanks for explanation - Misha 17:33:10 11/29/05 (0)
  • I was also looking at that BUT.... - Eddie in TO 10:34:53 11/29/05 (0)
• 84 Euro spec E28 520i FS, $1250 - Gordon 06:44:32 11/29/05 (0)
• 3L CSA coupe - James 02:42:09 11/29/05 (5)
  • Wiring, console changes - David B 13:21:24 11/30/05 (2)
    • The flywheel and mount plate for the TC - Velocewest 12:20:32 12/01/05 (1)
      • TC drive plate is different - David B 13:37:53 12/02/05 (0)
  • Re: 3L CSA coupe - James 00:40:42 11/30/05 (0)
  • Re: 3L CSA coupe - Velocewest 15:45:14 11/29/05 (0)
• Leaking!!!! - Dan Lafley 00:16:12 11/29/05 (5)
  • Did you change the seal, Dan? - Remy Davison 06:20:43 11/29/05 (0)
  • Re: Leaking!!!! - T.Hanson 06:16:13 11/29/05 (1)
    • Re: Leaking!!!! - Tom 20:14:39 11/29/05 (0)
  • Re: Leaking!!!! - Craig in Davis 00:31:09 11/29/05 (1)
    • I park mine nose down. Nose up it leaks. NT - Don in NJ 05:58:45 11/29/05 (0)
• POR 15 - Tom in Pueblo 19:48:29 11/28/05 (6)
  • Thanks to all.(nt) - T 08:44:33 11/30/05 (0)
  • Eastwood - Velocewest 13:11:38 11/29/05 (0)
  • Re: POR 15 - peter mooney 06:51:43 11/29/05 (1)
    • It's all about the prep.... - Al Canuck 12:26:43 11/29/05 (0)
  • They make a high temp paint called POR20 - Al Canuck 21:16:20 11/28/05 (1)
    • Re: They make a high temp paint called POR20 - Lenny D. 23:43:10 11/28/05 (0)
• Conversion to Motronic - Michael R from Melbourne 14:39:38 11/28/05 (6)
  • Don't Bother, Leave well enough alone - John in Simi Valley 06:54:36 11/30/05 (0)
  • Re: Conversion to Motronic - Mike W. 17:08:22 11/28/05 (4)
    • Re: Conversion to Motronic - Velocewest 15:54:05 11/29/05 (3)
      • OK I'm convinced but.... - Michael R from Melbourne 18:21:38 11/30/05 (2)
        • Because... - Remy Davison 03:51:26 12/01/05 (1)
          • And... - Velocewest 12:23:36 12/01/05 (0)
• e12 gearbox splines and american clutch discs - colinwhyte 14:31:56 11/28/05 (2)
  • I doubt it - Mike W. 17:59:45 11/28/05 (1)
    • Re: I doubt it - Velocewest 13:02:02 11/29/05 (0)
• Oh! one more! :) - KenB 12:27:48 11/28/05 (5)
  • IIRC, might've been an option - Remy Davison 06:24:22 11/29/05 (0)
  • Switch - Andrew 13:00:15 11/28/05 (3)
    • Re: Switch - KenB 13:52:52 11/28/05 (2)
      • Spoiled by a dual power mirror switch... - Mike 15:09:56 11/28/05 (1)
        • My 78 530i only has 1 mirror. Normal? - Patrick McHugh 21:32:11 11/28/05 (0)
• 2 more misc. questions... - KenB 12:26:09 11/28/05 (2)
  • Diff mount - Velocewest 16:12:36 11/29/05 (0)
  • Re: 2 more misc. questions... - T.Hanson 17:28:49 11/28/05 (0)
• Anyone put power e28 seats in 79 or earlier e12? - Craig in Davis 11:56:28 11/28/05 (4)
  • Re: Anyone put power e28 seats in 79 or earlier e12? - Sam Schultz 16:10:59 11/28/05 (3)
    • I agree - Velocewest 13:26:27 11/29/05 (2)
      • All well & good, wish I hadn't already purchased - Craig in Davis 22:32:01 11/29/05 (0)
      • That reminds me... - Al from Oz 20:19:28 11/29/05 (0)
• Motronic ECU - JoshInM3 08:05:20 11/28/05 (10)
  • Can email you table of ECUs/years for US/Euro cars - Remy Davison 06:30:31 11/29/05 (0)
  • Nothing is simple - Mike W. 17:02:58 11/28/05 (0)
  • what year is your motor/harness? - Justin in C'ville 11:13:04 11/28/05 (2)
    • Re: what year is your motor/harness? - JoshInM3 11:17:14 11/28/05 (1)
      • Ok, but be sure its from an 81-82 only - Justin in C'ville 11:52:04 11/28/05 (0)
  • Re: Motronic ECU - jim@dashop 08:23:07 11/28/05 (2)
    • Re: Motronic ECU - JoshInM3 08:42:06 11/28/05 (1)
      • Re: Motronic ECU - jim@dashop 09:07:47 11/28/05 (0)
  • Re: Motronic ECU - JoshInM3 08:11:40 11/28/05 (1)
    • Re: Motronic ECU - GrtWhtHope 10:50:19 11/28/05 (0)
• Time for a tune-up? - Bill Hynes 07:06:06 11/28/05 (1)
  • I don't get much better.... - Brian in Calgary 09:48:20 11/28/05 (0)
• Argh! Getting viscous coupling off - Remy Davison 05:55:01 11/28/05 (4)
  • Re: Argh! Getting viscous coupling off - T 11:59:01 11/28/05 (2)
    • Thanks T and Brian - what's an 'Easy Out'? - Remy Davison 17:34:27 11/28/05 (1)
      • Here is what I am talking about - Brian in Calgary 19:18:38 11/28/05 (0)
  • I had the same problem and had to use an... - Brian in Calgary 09:58:11 11/28/05 (0)
• Fan Clutch - Bob 05:46:36 11/28/05 (1)
  • New pulley... yes. Fan... maybe... - Tulsa Dave 06:18:59 11/28/05 (0)
• E12 FS nor cal - Chris (Bay Area - CA) 22:29:04 11/27/05 (0)
• You won't believe this one...(long) - Brian in Calgary 21:28:06 11/27/05 (4)
  • Re: You won't believe this one...(long) - Tom 16:04:46 11/28/05 (0)
  • mine sprung a leak also... - eric in denver 23:06:50 11/27/05 (1)
    • been there too - Michael R from Melbourne 14:32:29 11/28/05 (0)
  • Gas leaks I have known - Mike W. 21:35:14 11/27/05 (0)
• Automatic Transmission Gear Indicator Lights - Ernie in Houston 19:39:42 11/27/05 (3)
  • I have the exact same thing with mine.. - Brian in Calgary 20:35:07 11/27/05 (2)
    • Re: I have the exact same thing with mine.. - Ernie in Houston 06:50:24 11/28/05 (1)
      • Mine does the same.. - Brian in Calgary 10:08:55 11/28/05 (0)
• LSD on Ebay...(not mine)... - Scott ATL 17:33:39 11/27/05 (0)
• New engine for the project - JoshInM3 16:09:14 11/27/05 (1)
  • I have parts! - Patrick McHugh 10:19:53 11/28/05 (0)
• Describe the gas cap... - pjpace 14:44:45 11/27/05 (5)
  • I suspect ... - Troy Rudolph 11:17:58 11/29/05 (1)
    • And, I found this .... - Troy Rudolph 11:47:20 11/29/05 (0)
  • There were a few - Mike W. 15:39:02 11/27/05 (2)
    • Mine is threaded as well....NT - Scott ATL 16:58:07 11/27/05 (1)
      • Odd - mine IS made of Tupperware (T) - pjpace 11:32:08 11/28/05 (0)
• small block V-8 conversion - Jeff 14:14:00 11/27/05 (5)
  • buick V-8 - colinwhyte 12:42:29 11/28/05 (0)
  • The Small GM V8 was too small. - Lars Olbimmerguy 16:08:39 11/27/05 (0)
  • Re: small block V-8 conversion - peter mooney 14:41:37 11/27/05 (2)
    • Re: small block V-8 conversion - Troy Rudolph 07:30:28 11/28/05 (0)
    • Re: small block V-8 conversion - Gordon 16:35:35 11/27/05 (0)
• Rebuilt Scheel seats on Ebay - Al Canuck 12:49:44 11/27/05 (0)
• Alpina Wheels for sale - Gordon 12:35:32 11/27/05 (0)
• Gas Fumes/Mike/Daniel - Tom 19:21:14 11/26/05 (7)
  • Re: Gas Fumes/Mike/Daniel - Tom 05:29:42 11/27/05 (0)
  • Re: Gas Fumes/Mike/Daniel - Daniel H 19:29:49 11/26/05 (5)
    • dont have to take out tank... - Eric in denver 20:28:35 11/26/05 (4)
      • actually there is a FAQ. - eric in denver 20:29:20 11/26/05 (3)
        • It doesn't seem to cover the vapor recovery lines - Mike W. 21:19:30 11/26/05 (2)
          • yes, I wondered about those also... - Eric in denver 21:47:15 11/26/05 (1)
            • Re: yes, I wondered about those also... - Daniel H 21:56:23 11/26/05 (0)
• Heating System Weirdness - Mike 15:18:16 11/26/05 (1)
  • LA repair - greghill-phx,az 19:28:56 11/26/05 (0)
• BMW 3.5 Euro 218bhp M30 Big Six from 81 635CSi 120 - Gordon 12:12:57 11/26/05 (0)
• Gas tank tow ring - how stable is it ? - Carl-Seattle 09:29:31 11/26/05 (3)
  • Re: Gas tank tow ring - how stable is it ? - Daniel H 10:59:22 11/26/05 (1)
    • NOT very - Sam Schultz 16:05:57 11/26/05 (0)
  • Re: Gas tank tow ring - how stable is it ? - Velocewest 10:58:51 11/26/05 (0)
• 1980 BMW 528i - mirror adjust - Mike 01:37:06 11/26/05 (2)
  • Re: 1980 BMW 528i - mirror adjust - Mike 18:21:13 11/26/05 (0)
  • Re: 1980 BMW 528i - mirror adjust - Daniel H 11:01:12 11/26/05 (0)
• A few E12's for sale near Atlanta lately... - Jeff Olson 21:45:22 11/25/05 (0)
• 79 528i for sale, $900 - Gordon 20:52:56 11/25/05 (0)
• 78 530i questions - TheGreatWhiteHope 17:41:05 11/25/05 (1)
  • Lots... - Mike W. 18:06:46 11/25/05 (0)
• Question Regarding Brake Bleeding: Diagnose Sought - Misha 14:51:18 11/25/05 (9)
  • One more way... - Don Daynes 10:23:43 11/26/05 (0)
  • Huge time saver - Chris Itterly 09:19:53 11/26/05 (0)
  • Re: Question Regarding Brake Bleeding: Diagnose Sought - Peter Florance 07:28:51 11/26/05 (0)
  • Re: Question Regarding Brake Bleeding: Diagnose Sought - Mark 23:32:45 11/25/05 (0)
  • Re: Question Regarding Brake Bleeding: Diagnose Sought - Daniel H 15:55:55 11/25/05 (4)
    • Re: Question Regarding Brake Bleeding: Diagnose Sought - Tom, NC 16:03:37 11/25/05 (3)
      • Re: Question Regarding Brake Bleeding: Diagnose So - Mike W. 16:50:01 11/25/05 (0)
      • My Wife is pressing the pedal.... - Misha 16:48:01 11/25/05 (1)
        • Re: My Wife is pressing the pedal.... - Eduardo 05:33:27 11/26/05 (0)
• POLL: What's the LEAST you've paid for an E12? - Jeff Olson 14:11:59 11/25/05 (22)
  • Re: POLL: What's the LEAST you've paid for an E1 - dennist 21:37:18 11/30/05 (0)
    </