Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XXVIII

(2003/02/27 - 2003/04/27)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• E12 SAFETY ALERT!Long but important. - Al from Oz 03:16:05 04/27/03 (0)
• best cylinder head. - rick 22:53:19 04/26/03 (1)
  • Check out the FAQ on m-30 heads - Matt C 07:44:24 04/27/03 (0)
• Intake - Dan Lafley 22:16:42 04/26/03 (1)
  • Re: Intake - Canada 23:06:01 04/26/03 (0)
• whirring high pitched sound... - Maria 16:02:12 04/26/03 (3)
  • Had the same problem..... - Dan Lafley 22:46:19 04/26/03 (0)
  • Re: whirring high pitched sound... - Kaveman 18:07:17 04/26/03 (0)
  • Re: whirring high pitched sound... - Jamie Seattle 16:44:03 04/26/03 (0)
• can anybody HELP? Head Reinstallation Today BUT.. - Jon Barnes 10:09:20 04/26/03 (3)
  • Don't use both... - Bill Bowes 23:03:19 04/26/03 (0)
  • Re: can anybody HELP? Head Reinstallation Today BUT.. - Jamie Seattle 10:27:01 04/26/03 (0)
  • Re: can anybody HELP? Head Reinstallation Today BUT.. - Jamie Seattle 10:26:57 04/26/03 (0)
• Rear Wheel Alignment and Tire Advice - Canada 08:04:17 04/26/03 (3)
  • Re: Rear Wheel Alignment and Tire Advice - Peter Florance 20:32:19 04/26/03 (0)
  • Re: Rear Wheel Alignment and Tire Advice - karl 08:10:01 04/26/03 (1)
    • f**k they would be TALL tyres (nt) - Andrew 09:01:01 04/26/03 (0)
• slow to fire up - Mike-adelaide 05:03:18 04/26/03 (1)
  • Re: slow to fire up - Peter Florance 06:19:10 04/26/03 (0)
• 3.5 L Conversion - Tito 03:42:23 04/26/03 (4)
  • Re: 3.5 L Conversion - Peter Florance 06:21:32 04/26/03 (3)
    • Re: 3.5 L Conversion - Tito 01:55:42 04/27/03 (1)
      • cam repair nut part #? - Peter Florance 07:33:03 04/27/03 (0)
    • Re: 3.5 L Conversion - Blair 09:50:35 04/26/03 (0)
• Distributor - Dan Lafley 21:33:34 04/25/03 (5)
  • Oh Yeah..77 530i...nt - Dan Lafley 23:08:15 04/25/03 (2)
    • that's a problem - Peter Florance 06:26:00 04/26/03 (1)
      • Looking at peter's throttle body FAQ (long) - Matt C 07:58:00 04/26/03 (0)
  • Re: Distributor - Matt C 22:50:38 04/25/03 (0)
  • If you are talking about at an idle - Lars Olbimmerguy 22:24:51 04/25/03 (0)
• Why ask Why? - Mike in Tenn 18:49:06 04/25/03 (2)
  • Re: not to meantion performance...NT - Blair 19:04:28 04/25/03 (0)
  • Can get hot enough to damage head if.... - JB in Boise 19:01:33 04/25/03 (0)
• Sport Wheel: Are These Hard To Come By? - Misha 18:32:19 04/25/03 (3)
  • Re: Sport Wheel: Are These Hard To Come By? - Mr. Coffey 18:47:05 04/25/03 (0)
  • Standard issue on - trubey 18:44:51 04/25/03 (1)
    • Re: Standard issue on - Frank H 20:05:29 04/25/03 (0)
• Any ideas what E28 5xxis seats are worth? - Mr. Coffey 18:27:00 04/25/03 (5)
  • Re: Any ideas what E28 5xxis seats are worth? - Eric Q 03:40:15 04/26/03 (0)
  • Follow-up question - Mr Coffey 18:29:42 04/25/03 (3)
    • Re: Follow-up question - Kaveman 19:18:39 04/25/03 (1)
      • Re: Follow-up question - Jim 21:39:12 04/25/03 (0)
    • IS seats are special - Trubey 18:49:40 04/25/03 (0)
• need opinions on my idle rattle ASAP pls help!! - Andrew 18:14:29 04/25/03 (10)
  • Let me try here andrew... - Matt C 21:04:40 04/25/03 (9)
    • thanks & questions - Andrew 22:34:00 04/25/03 (7)
      • try to expain the noise again. - Matt C 23:08:05 04/25/03 (6)
        • Re: try to expain the noise again. - Andrew 06:42:33 04/26/03 (5)
          • Ok - Matt C 07:42:44 04/26/03 (4)
            • Re: Ok - Andrew 09:06:46 04/26/03 (3)
              • Book????????? - Matt C 09:35:08 04/26/03 (2)
                • Re: Book????????? - Andrew 10:03:14 04/26/03 (1)
                  • Lets go offline with this. I will e-mail you(nt) - Matt C 10:11:20 04/26/03 (0)
    • Aussie fivers? - Matt C 21:10:12 04/25/03 (0)
• $$ price of an M535i in 1980 - Luke 18:02:54 04/25/03 (1)
  • Re: $$ price of an M535i in 1980 - Jim 22:00:01 04/25/03 (0)
• nice E12 in portland - Frank H 18:00:32 04/25/03 (0)
• '76 US model 530i... - Rockwell 16:08:47 04/25/03 (2)
  • Contact me - Chris 18:03:33 04/26/03 (0)
  • Where in Vancouver? - Chris 17:07:51 04/25/03 (0)
• 524td questions - stewart 14:25:34 04/25/03 (4)
  • Nope - Troy Rudolph 14:42:14 04/25/03 (3)
    • Re: Nope - Blair 17:04:03 04/25/03 (2)
      • Re: Nope - Troy Rudolph 18:05:03 04/25/03 (1)
        • Re: Nope - Troy Rudolph 09:00:05 04/27/03 (0)
• 80 528i for sale, no affiliation... - billy in SLO 13:59:20 04/25/03 (0)
• Oil consumption, sound off! - Matt C 09:29:25 04/25/03 (9)
  • WOW, I'm using 1 quart every 5000 miles. - John in Simi Valley 01:22:57 04/27/03 (0)
  • About the same as the rest... - Tulsa Dave 10:00:41 04/26/03 (0)
  • Even W/O blue startup smoke, the valve guides - Lars Olbimmerguy 18:31:42 04/25/03 (4)
    • Sorry... not critiquing your particular driving >> - Lars OBG 22:32:53 04/25/03 (2)
      • Wasn't offended at all. - Matt C 09:41:44 04/26/03 (1)
        • No problem... After about 11 of these - Lars OBG 10:26:13 04/26/03 (0)
    • I dont drive this car any different than any other - Matt C 19:46:39 04/25/03 (0)
  • Re: Oil consumption, sound off! - chris, ohio 13:26:04 04/25/03 (0)
  • Re: Oil consumption, sound off! - Blair 11:35:16 04/25/03 (0)
• E12 Alpina downpipes - john 01:17:57 04/25/03 (1)
  • Re: E12 Alpina downpipes - Canada Karl 21:06:03 04/25/03 (0)
• playing with timing - Matt C 21:22:41 04/24/03 (7)
  • Re: playing with timing - Peter Florance 04:57:40 04/25/03 (4)
    • Running 28 degrees TDC on regular gas, no ping - Misha 14:34:32 04/25/03 (1)
      • emissions - Peter Florance 16:25:00 04/25/03 (0)
    • Whats a resonable price ? - Matt C 08:31:16 04/25/03 (1)
      • I paid 45 @ the local u pull it eom - stewart 14:32:36 04/25/03 (0)
  • Re: playing with timing - Andrew 01:22:42 04/25/03 (1)
    • Andrew! - Matt C 08:25:44 04/25/03 (0)
• Ebay item: Will an E28 rear crossbrace fit? - Brian in Mtl 21:22:35 04/24/03 (1)
  • Should be made of aluminum - Misha 14:25:40 04/25/03 (0)
• 3.5L conversion - Tito 20:34:39 04/24/03 (10)
  • Re: 3.5L conversion - Troy Rudolph 08:29:48 04/25/03 (3)
    • more - Troy Rudolph 09:10:27 04/25/03 (2)
      • Why not go with Euro-spec motor - Misha 14:27:44 04/25/03 (1)
        • Re: Why not go with Euro-spec motor - Troy Rudolph 14:47:12 04/25/03 (0)
  • Re: 3.5L conversion - Eddie 21:48:39 04/24/03 (5)
    • Re: 3.5L conversion - Tito 22:04:01 04/24/03 (4)
      • Re: 3.5L conversion - Eddie 22:55:58 04/24/03 (1)
        • Re: 3.5L conversion - Tito 00:59:10 04/25/03 (0)
      • Re: 3.5L conversion - Blair 22:21:14 04/24/03 (1)
        • Re: 3.5L conversion - Tito 01:01:54 04/25/03 (0)
• E12 M535i - Jake Hall 20:04:11 04/24/03 (26)
  • Re: E12 M535i - mark 13:27:46 04/25/03 (0)
  • Re: E12 M535i - Frank H 09:58:01 04/25/03 (0)
  • Re: E12 M535i - james 01:49:46 04/25/03 (0)
  • Count mine in. - Al from Oz 21:43:49 04/24/03 (0)
  • Re: E12 M535i - Jake Hall 21:28:16 04/24/03 (6)
    • Re: E12 M535i - Lee Cornett 12:02:12 04/25/03 (5)
      • Re: E12 M535i - Adam Wilson 07:33:57 04/26/03 (2)
        • Re: E12 M535i - Lee Cornett 16:55:25 04/26/03 (1)
          • did you check your email? - Adam Wilson 18:31:56 04/26/03 (0)
      • Hey Lee - a question for ya.... - JB in Boise 12:20:55 04/25/03 (1)
        • Re: Hey Lee - a question for ya.... - Lee or Kathy Cornett 19:50:41 04/25/03 (0)
  • Re: E12 M535i - Mark 20:41:58 04/24/03 (14)
    • The Question was........ - Al from Oz 04:55:53 04/25/03 (3)
      • Re: The Question was........ - Mark 07:26:46 04/25/03 (2)
        • My car...... - Al from Oz 16:40:03 04/25/03 (1)
          • Re: My car...... - Mark 01:14:09 04/26/03 (0)
    • Re: E12 M535i - Frank H 20:54:07 04/24/03 (9)
      • Extra cars - Mark 02:28:09 04/25/03 (3)
        • Good grief, why? - Remy Davison 09:45:29 04/25/03 (2)
          • The answer is cost : ( - Mark 11:05:36 04/25/03 (1)
            • And... - Al from Oz 16:34:52 04/25/03 (0)
      • Re: E12 M535i - Adam Wilson 22:16:57 04/24/03 (4)
        • Re: E12 M535i - Jefflee 17:32:56 04/25/03 (3)
          • Re: E12 M535i - Jake Hall 21:36:14 04/25/03 (0)
          • Paint??? !!! - Tulsa Dave 17:53:57 04/25/03 (1)
            • New paint might add more weight !! Nevermind - Jefflee 21:28:21 04/26/03 (0)
• kind of old news but, - billy in SLO 19:38:58 04/24/03 (0)
• turbo - raymon 19:00:39 04/24/03 (1)
  • Re: turbo - Jerry 00:37:05 04/25/03 (0)
• Downpipe Concerns....need feedback. - Canada Karl 16:33:58 04/24/03 (3)
  • Was an easier fix for me - Matt C 18:44:13 04/24/03 (1)
    • Re: downpipes - Blair 11:31:35 04/25/03 (0)
  • Re: Downpipe Concerns....need feedback. - Frank H 18:39:12 04/24/03 (0)
• Got burned by an M3 - Luke 12:48:11 04/24/03 (24)
  • 336/ the Euro engine made it here - finally - Jefflee 17:35:07 04/25/03 (0)
  • Here's another approach - Troy Rudolph 22:52:56 04/24/03 (6)
    • Re: Here's another approach - Mark 23:22:51 04/24/03 (5)
      • Re: Here's another approach - Troy Rudolph 09:07:14 04/25/03 (0)
      • 350 in the e12 - Nick, CO 01:51:21 04/25/03 (3)
        • Re: Or how about a BMW V8?? - Blair 11:34:36 04/25/03 (2)
          • Re: Or how about a BMW V8?? - Troy Rudolph 12:52:59 04/25/03 (1)
            • Re: E12-V12? Now you're talkin'... - Tulsa Dave 17:56:11 04/25/03 (0)
  • Re: Got burned by an M3 - Jim 19:21:26 04/24/03 (0)
  • Re: Got burned by an M3 - Jim 18:59:53 04/24/03 (0)
  • Re: Got burned by an M3 - Eric Q 15:43:42 04/24/03 (4)
    • Re: Got burned by an M3 - Frank H 18:53:44 04/24/03 (3)
      • Re: Got burned by an M3 - Eric Q 02:43:49 04/25/03 (0)
      • laugh, grenading motors and E12 vs E46 - Adam Wilson 22:26:12 04/24/03 (1)
        • Re: laugh, grenading motors and E12 vs E46 - Luke 10:36:46 04/25/03 (0)
  • Maybe this would do it for you - Troy Rudolph 14:53:11 04/24/03 (2)
    • Maybe it would! - Luke 15:06:22 04/24/03 (1)
      • Re: Maybe it would! - Troy Rudolph 15:34:11 04/24/03 (0)
  • Re: Got burned by an M3 - Mark 13:32:37 04/24/03 (3)
    • Re: Got burned by an M3 - james 13:49:57 04/24/03 (2)
      • Re: Got burned by an M3 - Mark 20:37:51 04/24/03 (1)
        • Re: Got burned by an M3 - james 00:52:53 04/27/03 (0)
  • Re: Got burned by an M3 - james 13:27:01 04/24/03 (1)
    • Turbo? (nt) ;-) - Mike In Chicago 14:41:18 04/24/03 (0)
• Oregon Now Salts Roads (UPDATE) - Lars Olbimmerguy 10:59:47 04/24/03 (3)
  • I hear ya' Lars....(more)... - Tim G in Central NJ 11:29:41 04/24/03 (2)
    • Cape May sea spray and road salt!! - Matt C 18:48:55 04/24/03 (1)
      • Re: Cape May sea spray and road salt!! - T.Han 20:33:03 04/24/03 (0)
• Temp gauge sitting on the red line! - Nath in Tassie 01:01:33 04/24/03 (4)
  • why you want to keep the T-stat! - Robert Bondi 23:02:31 04/24/03 (0)
  • Re: Temp gauge sitting on the red line! - Remy Davison 09:03:50 04/24/03 (0)
  • Re: Temp gauge sitting on the red line! - Peter Florance 05:06:36 04/24/03 (1)
    • Re: Temp gauge sitting on the red line! - Matt C 08:30:18 04/24/03 (0)
• Hazard switch - T.Han 00:32:04 04/24/03 (2)
  • Re: Hazard switch - Peter Florance 05:12:43 04/24/03 (1)
    • Correct... - Lenny D. 14:35:28 04/24/03 (0)
• Speed switch - Matt C 22:18:11 04/23/03 (2)
  • Re: Speed switch - Blair 14:18:05 04/24/03 (1)
    • It isnt the TBS. - Matt C 18:18:30 04/24/03 (0)
• Jet-Hot - Troy Rudolph 21:34:25 04/23/03 (4)
  • Re: Jet-Hot - Don Daynes 23:24:56 04/23/03 (3)
    • Gee whiz, great CURVES ;-) - Eddie (Toronto) 21:32:57 04/24/03 (0)
    • Re: NICE pipes! - Brian in Mtl. 21:11:49 04/24/03 (0)
    • Wow! - Troy Rudolph 08:22:31 04/24/03 (0)
• Reactors.....Do I have em'? I have no clue.... - Dave NYC 20:42:07 04/23/03 (4)
  • they're huge......look like the 1 pound coffee - Lars OBG 22:15:51 04/23/03 (0)
  • Re: Reactors.....Do I have em'? I have no clue.... - Mike W. 20:51:57 04/23/03 (2)
    • Re: Reactors.....Do I have em'? I have no clue.... - Dave NYC 21:02:02 04/23/03 (1)
      • Re: Reactors.....Do I have em'? I have no clue.... - Mike W. 23:39:26 04/23/03 (0)
• Need diagram for the vaccum hoses from distributor - Steve 15:18:56 04/23/03 (1)
  • Re: Need diagram for the vaccum hoses from distributor - Blair 15:59:01 04/23/03 (0)
• Aux. Air Valve/Starter - DScott 09:34:46 04/23/03 (3)
  • Re: Aux. Air Valve/Starter - Kaveman 11:04:28 04/23/03 (2)
    • Re: Aux. Air Valve/Starter - DScott 12:13:17 04/23/03 (1)
      • Re: Aux. Air Valve/Starter - Canada Karl 09:47:55 04/24/03 (0)
• how to install the windscreens - christopher B 08:02:15 04/23/03 (7)
  • I am 2 for 4..... having done much body and paint - Lars Olbimmerguy 17:37:21 04/23/03 (4)
    • I have broken 1 out of maybe 10 or 12 - Mike W. 20:04:57 04/23/03 (3)
      • Hey.. I said I did B&P... didn't say "good" - Lars OBG 22:08:31 04/23/03 (2)
        • If I ever get up your way - Mike W. 23:33:07 04/23/03 (1)
          • The shop is recreational, but I justify it - Lars OBG 23:44:12 04/23/03 (0)
  • Re: how to install the windscreens - Cristian In Sydney 16:42:24 04/23/03 (1)
    • Re: how to install the windscreens - christopher B 06:17:31 04/24/03 (0)
• WTB wood console tray. - Al from Oz 07:28:26 04/23/03 (7)
  • Re: WTB wood console tray. - Cristian in Sydney 16:37:30 04/23/03 (3)
    • Good news - Al from Oz 22:50:31 04/23/03 (2)
      • Hey! - Remy Davison 08:53:36 04/24/03 (1)
        • Re: Hey! - Al from Oz 22:00:45 04/24/03 (0)
  • Re: WTB wood console tray. - ChuckNC 08:25:46 04/23/03 (2)
    • More info - Al from Oz 16:43:36 04/23/03 (0)
    • Re: WTB wood console tray. - Blair 12:19:33 04/23/03 (0)
• Looking for Tim G. - Jeff C 06:24:41 04/23/03 (1)
  • Re: Looking for Tim G. - Tim G in Cent 07:52:16 04/23/03 (0)
• shipping advice - ChuckNC 03:53:05 04/23/03 (6)
  • Re: shipping advice - BNC 06:13:29 04/24/03 (0)
  • Re: shipping advice - Kaveman 10:57:00 04/23/03 (0)
  • Re: shipping advice - Jeff C 06:13:28 04/23/03 (0)
  • Re: shipping advice - Canada Karl 05:31:28 04/23/03 (0)
  • a 265 in a box is within UPS range - ...tom 05:29:39 04/23/03 (1)
    • mine came FEDEX ground - Peter Florance 05:44:37 04/23/03 (0)
• Alpina USA gone? - T.Han 01:05:01 04/23/03 (3)
  • I don't think so - Frank H 10:02:03 04/23/03 (0)
  • Re: Alpina USA gone? - Nick, CO 05:40:50 04/23/03 (1)
    • Let's share a tear - Brian in Mtl. 11:12:59 04/23/03 (0)
• Konis on eBay - Troy Rudolph 23:07:23 04/22/03 (3)
  • Re: Konis on eBay - Canada Karl 05:35:49 04/23/03 (2)
    • Re: Konis on eBay - Troy Rudolph 08:31:46 04/23/03 (0)
    • The rears are different... - Tulsa Dave 07:36:47 04/23/03 (0)
• Starter - Dan Lafley 23:06:41 04/22/03 (4)
  • Re: Starter - ChuckNC 03:59:45 04/23/03 (3)
    • Wrench - ChuckNC 15:56:32 04/23/03 (0)
    • Re: Starter - DScott 12:15:10 04/23/03 (0)
    • Re: Starter - Dan Lafley 11:01:13 04/23/03 (0)
• parting 79 528i - Phil M 21:22:25 04/22/03 (2)
  • Re: parting 79 528i - Matt C 21:53:12 04/22/03 (1)
    • Re: parting 79 528i - Phil 22:16:20 04/22/03 (0)
• 75 320/6 !!!! - Canada Karl 21:04:24 04/22/03 (4)
  • Re: 75 320/6 !!!! - Frank H 21:46:57 04/22/03 (0)
  • I have an 80 520/6 I would sell it for a lot less - Sam Schultz 21:18:08 04/22/03 (0)
  • I've seen a few later years - Peter Florance 21:15:52 04/22/03 (1)
    • 320/6 arrived in 1977 - Mark 03:17:30 04/23/03 (0)
• 75 320/6 !!!! - Canada Karl 21:04:15 04/22/03 (0)
• Autocross followup - Peter Florance 20:53:02 04/22/03 (2)
  • Re: Autocross followup - Jim 07:46:56 04/23/03 (1)
    • Re: Autocross followup - Peter Florance 09:06:22 04/23/03 (0)
• BMW won't start - Brian 17:57:57 04/22/03 (3)
  • Re: BMW won't start - Rockwell 16:45:38 04/25/03 (0)
  • Re: BMW won't start - Peter Florance 20:44:27 04/22/03 (1)
    • Re: BMW won't start - christopher B 05:51:32 04/23/03 (0)
• Original Tool box kit for sale - Andre528i 17:17:32 04/22/03 (0)
• Alpina front rotor alternatives - Brian in Mtl. 16:45:38 04/22/03 (7)
  • Re: Alpina front rotor alternatives - Troy Rudolph 13:10:47 04/23/03 (4)
    • Re: Alpina front rotor alternatives - Troy Rudolph 13:12:43 04/23/03 (3)
      • Re: Alpina front rotor alternatives-Great idea - Brian in Mtl. 20:38:22 04/23/03 (2)
        • Re: Alpina front rotor alternatives-Great idea - Peter Florance 05:41:49 04/24/03 (1)
          • Re: Alpina front rotor alternatives - Brian in Mtl 21:15:47 04/24/03 (0)
  • Re: Alpina front rotor alternatives - Adam Wilson 22:06:00 04/22/03 (1)
    • Re: Alpina front rotor alternatives - Brian in Mtl. 11:10:01 04/23/03 (0)
• 1980 528i ebay Freight-Pig FS In Texas - Misha 15:28:17 04/22/03 (1)
  • Are people really that serious? - Jeff C 06:22:47 04/23/03 (0)
• KYB Struts - Brad In Texas 11:23:48 04/22/03 (7)
  • Re: KYB Struts - Troy Rudolph 14:29:28 04/22/03 (0)
  • I'm running them on my '80... - Tulsa Dave 13:16:06 04/22/03 (1)
    • Boge OEM not same as Boge Turbo Gas - Peter Florance 14:10:09 04/22/03 (0)
  • Re: KYB Struts - Karl in KS 13:02:31 04/22/03 (0)
  • Yes--KYB's all around (more) - Tim G in Central NJ 12:30:26 04/22/03 (2)
    • Re: Yes--KYB's all around (more) - Peter Florance 12:54:25 04/22/03 (1)
      • Re: Yes--KYB's all around (more) - rick 23:02:47 04/22/03 (0)
• 5erFest question... - MikeS86 10:21:05 04/22/03 (1)
  • Re: 5erFest question... - Jake Hall 16:57:33 04/22/03 (0)
• Can't make it to 5er Fest :-( - ChuckNC 09:55:24 04/22/03 (4)
  • Always good to have more than one hobby. - Al from Oz 19:44:07 04/22/03 (0)
  • congrats AND - Andrew 17:20:20 04/22/03 (0)
  • Congrates. - Wietse 13:51:37 04/22/03 (0)
  • You sly dog... - Matt C 10:01:20 04/22/03 (0)
• Ignition coils - Matt C 09:54:43 04/22/03 (4)
  • Re: Ignition coils - Walt Barie 13:01:46 04/23/03 (0)
  • Re: Ignition coils - Lenny D. 23:20:40 04/22/03 (0)
  • Re: Ignition coils - Peter Florance 13:05:25 04/22/03 (1)
    • Will do - Matt C 18:53:26 04/24/03 (0)
• Front Calipers: How tough to rebuild? - Tim G in Central NJ 07:46:14 04/22/03 (7)
  • Re: Front Calipers: How tough to rebuild? - Troy Rudolph 08:05:48 04/22/03 (6)
    • also inexpensive - Karl in KS 13:07:00 04/22/03 (0)
    • Yessir, we'll do! Thanks! :) (N/T) - Tim G in Central NJ 09:02:18 04/22/03 (4)
      • hoses - Peter Florance 09:30:40 04/22/03 (3)
        • take care - james 09:56:16 04/22/03 (2)
          • Pelican Part - Peter Florance 10:09:01 04/22/03 (0)
          • Metal lines are available at NAPA, etc. - ChuckNC 09:59:12 04/22/03 (0)
• Touch up Paint - Canada Karl 05:47:32 04/22/03 (1)
  • Try it again - John in Simi Valley 19:38:57 04/22/03 (0)
• 2004 Los Angeles Chapter Clean Car Contest - Don Daynes 00:11:14 04/22/03 (1)
  • Re: 2003 Los Angeles Chapter Clean Car Contest - Don Daynes 00:14:44 04/22/03 (0)
• car fails to start - christopher B 00:10:00 04/22/03 (5)
  • Re: car fails to start - justin webster 08:42:51 04/22/03 (3)
    • car fails to start turns over but doesnt start - christopher B 16:48:48 04/22/03 (0)
    • Is the coil the... - ChuckNC 09:50:03 04/22/03 (1)
      • Re: Is the coil the... - justin webster 13:24:59 04/22/03 (0)
  • Re: car fails to start - Matt C 06:39:09 04/22/03 (0)
• 530i Alloy Wheel Roundels - Canada Karl 21:04:16 04/21/03 (9)
  • Re: 530i Alloy Wheel Roundels - Alan V 15:43:36 04/23/03 (0)
  • Re: 530i Alloy Wheel Roundels - Dscott 09:42:04 04/23/03 (0)
  • Re: 530i Alloy Wheel Roundels - Dscott 09:41:42 04/23/03 (0)
  • The wheels on the two cars you mentioned - Lars Olbimmerguy 23:38:30 04/21/03 (3)
    • Re: The wheels on the two cars you mentioned - Canada Karl 05:36:15 04/22/03 (1)
      • Pretty hard to steal the cap - L OBG 10:05:23 04/22/03 (0)
    • Clarification. The hub cabs and chrome rings - L OBG 23:41:19 04/21/03 (0)
  • Re: 530i Alloy Wheel Roundels - Blair 22:20:55 04/21/03 (0)
  • Bavarian auotsport, under wheels, type (nt) - Matt C 22:11:32 04/21/03 (0)
• Missing my old E12... Anyone seen it? - Gavin Gray 19:35:03 04/21/03 (6)
  • Hello Gavin - David in STL 07:54:09 04/22/03 (0)
  • Gavin! - Peter Florance 19:40:10 04/21/03 (4)
    • Re: Gavin! - Gavin Gray 05:18:16 04/22/03 (3)
      • Re: Gavin! - Adam Wilson 22:09:05 04/22/03 (2)
        • Re: Gavin! - Gavin Gray 06:14:58 04/23/03 (1)
          • Re: Gavin! - Gavin Gray 06:16:12 04/23/03 (0)
• HEY TROY! We need something like this for e12's - Misha 18:44:58 04/21/03 (6)
  • Forget work! Spec da Bus instead! - Trubey 23:02:54 04/22/03 (1)
    • I recall the game/toy... - Tulsa Dave 07:43:04 04/23/03 (0)
  • Re: HEY TROY! We need something like this for e12's - Mike in Tenn 11:46:27 04/22/03 (0)
  • Re: HEY TROY! We need something like this for e12's - Kaveman 22:33:04 04/21/03 (0)
  • Sweet! - Luke 20:09:56 04/21/03 (0)
  • Agreed...then i would have something to do during - justin webster 18:55:43 04/21/03 (0)
• OZ Nationals - I did it in the pre 1978's (long) - Cristian in Sydney - Oz 17:19:53 04/21/03 (4)
  • Thanks for flying the E12 flag! - Al from Oz 04:25:32 04/22/03 (0)
  • Congrats!! - Don Daynes 00:12:31 04/22/03 (0)
  • excellent! - Peter Florance - First Fives Dictator for Life 19:31:20 04/21/03 (0)
  • Congrats On Your Award! - Misha 19:20:53 04/21/03 (0)
• Changing the exhaust/Inconsistent performance. - Matt C 16:16:45 04/21/03 (1)
  • Pulled the plugs - Matt C 16:45:21 04/21/03 (0)
• Bouncing temperature gage 80 528i - Alan V 16:00:09 04/21/03 (3)
  • Could be failure with sending unit float copper - Misha 17:04:12 04/21/03 (0)
  • Just got done fixing this - Matt C 16:50:03 04/21/03 (0)
  • Two ground straps at battery???... - Lars Olbimmerguy 16:12:30 04/21/03 (0)
• It should read..I need reactors for a 77 530i - Mike in Tenn 15:52:34 04/21/03 (1)
  • Got'em if you need'em - TexasTim 07:42:40 04/22/03 (0)
• Need Reactors for a 77 530i Anyone? - Mike in Tenn 15:36:06 04/21/03 (1)
  • Re: Need Reactors for a 77 530i Anyone? - rick 23:34:29 04/21/03 (0)
• 320is streering wheel in e12, install ? - Mike In Chicago 15:23:12 04/21/03 (1)
  • Re: 320is streering wheel in e12, install ? - Jim Hineline 18:08:33 04/21/03 (0)
• not starting - Matt K (78' 530i) 13:34:04 04/21/03 (1)
  • Spark Plugs? - Klaus 14:09:25 04/21/03 (0)
• Crooked hood 76 530i - Matt C 12:30:59 04/21/03 (1)
  • Re: Crooked hood 76 530i - Mike W. 23:28:10 04/21/03 (0)
• Starter replacement - Steve Malkos 10:40:41 04/21/03 (1)
  • Re: Starter replacement - Bob Iverach 15:12:08 04/21/03 (0)
• Grammy's 77 530i for sale or going to donate it - Joe Hahn 09:15:03 04/21/03 (2)
  • got an email asking for more details... - joe hahn 10:02:55 04/21/03 (1)
    • Hey email me - Steve C. 06:37:24 04/22/03 (0)
• 76 530i Wiring diagram...Need Visual - Canada Karl 06:47:29 04/21/03 (3)
  • Re: 76 530i Wiring diagram...Need Visual - Matt C 11:48:17 04/21/03 (2)
    • Re: 76 530i Wiring diagram...Need Visual - Canada Karl 17:41:57 04/21/03 (1)
      • Spring fever can make a man see and hear things. - Matt C 19:22:50 04/21/03 (0)
• Hey, Billy in SLO - John in Simi Valley 01:10:56 04/21/03 (1)
  • Hey John in Simi - billy in SLO 11:39:14 04/22/03 (0)
• Shocks - Tom Hawk 00:48:38 04/21/03 (1)
  • don't think so - stewart 14:44:29 04/21/03 (0)
• Wheel hop during burn outs - rick 00:26:13 04/21/03 (6)
  • Re: Wheel hop during burn outs - Mark 10:19:46 04/21/03 (5)
    • Re: Wheel hop during burn outs - rick 22:38:02 04/21/03 (4)
      • I forgot to add - rick 22:40:33 04/21/03 (3)
        • Subframe mounts - Mike W. 23:36:11 04/21/03 (2)
          • BMP sells a urethane subframe mount stiffener... - Tulsa Dave 08:55:19 04/22/03 (0)
          • Re: Subframe mounts - rick 00:30:45 04/22/03 (0)
• need rear passenger window glass - toronto mike 22:38:36 04/20/03 (1)
  • Re: need rear passenger window glass - DScott 08:55:14 04/21/03 (0)
• Starter - Dan Lafley 19:48:27 04/20/03 (0)
• Engine Fan Help!! - Mark Phillips 18:58:45 04/20/03 (4)
  • Re: Engine Fan Help!! - Mark Phillips 01:46:24 04/21/03 (2)
    • Re: Engine Fan Help!! - Mike W. 14:43:46 04/21/03 (1)
      • Thanx!(NT) - Mark Phillips 21:43:02 04/21/03 (0)
  • Re: Engine Fan Help!! - Mike W. 00:16:48 04/21/03 (0)
• funny/scary engine rattle @idle - Andrew 17:13:47 04/20/03 (2)
  • Re: funny/scary engine rattle @idle - Jamie Seattle 17:43:44 04/20/03 (1)
    • I agree with jamie. - Matt C 19:45:37 04/20/03 (0)
• Reset switch for egr check light - Matt C 16:36:17 04/20/03 (2)
  • Re: Reset switch for egr check light - Mike W. 17:15:34 04/20/03 (1)
    • Re: Reset switch for egr check light - Matt C 19:41:26 04/20/03 (0)
• Jules Verne - DScott 21:51:49 04/19/03 (1)
  • Correction--doh! - DScott 22:11:04 04/19/03 (0)
• Need Wiring Help!!! - Canada Karl 20:34:39 04/19/03 (2)
  • Re: Need Wiring Help!!! - DScott 21:48:38 04/19/03 (1)
    • Re: Need Wiring Help!!! - Canada Karl 06:44:21 04/21/03 (0)
• +-=Limited Slip Diff=-+ - justin webster 18:56:25 04/19/03 (6)
  • Re: +-=Limited Slip Diff=-+ - james 13:31:07 04/20/03 (0)
  • Re: +-=Limited Slip Diff=-+ - Jamie Seattle 09:14:43 04/20/03 (0)
  • Re: +-=Limited Slip Diff=-+ - aaron 23:45:57 04/19/03 (0)
  • Maybe - Mike W. 23:40:13 04/19/03 (2)
    • Re: Maybe - Canada Karl 09:50:42 04/20/03 (1)
      • Re: Maybe - Frank H 11:39:24 04/20/03 (0)
• First fives MIRC at all?? - Aaron 09:38:55 04/19/03 (1)
  • not yet but I know an owner if we want to have one - Sam Schultz 20:29:39 04/19/03 (0)
• Motorsports Stripes Color Codes - Lee Cornett 09:28:22 04/19/03 (6)
  • Re: Motorsports Stripes Color Codes - Al from Oz 17:52:20 04/19/03 (4)
    • Re: Motorsports Stripes Color Codes - Lee Cornett 22:07:45 04/19/03 (3)
      • Re: Motorsports Stripes Color Codes - Adam Wilson 23:02:04 04/19/03 (2)
        • Re: Motorsports Stripes Color Codes - Lee or Kathy Cornett 07:49:53 04/20/03 (1)
          • cool, thanks for the info (more) - Adam Wilson 09:27:50 04/20/03 (0)
  • I have these M-Technic stripes - 3.5cs 14:13:34 04/19/03 (0)
• Compression testing - justin webster 09:04:19 04/19/03 (5)
  • Re: Compression testing - Mark 19:19:40 04/19/03 (0)
  • Re: Compression testing - Jamie Seattle 09:43:40 04/19/03 (1)
    • Leak down testing - Matt C 10:30:33 04/19/03 (0)
  • Re: Compression testing - Matt C 09:08:19 04/19/03 (1)
    • Re: Compression testing - justin webster 09:18:29 04/19/03 (0)
• studded snow tires on rims - Jamie Seattle 08:21:35 04/19/03 (0)
• What are a set of 15" Mahle's worth? - Eric 23:11:34 04/18/03 (7)
  • Re: What are a set of 15" Mahle's worth? - T.Han 02:48:54 04/19/03 (6)
    • Re: What are a set of 15" Mahle's worth? - Michael 07:59:55 04/19/03 (5)
      • Re: What are a set of 15" Mahle's worth? - T.Han 15:46:34 04/19/03 (1)
        • Re: What are a set of 15" Mahle's worth? - Canada Karl 22:02:34 04/19/03 (0)
      • Offset is the distance the mounting surface - Lars Olbimmerguy 10:08:34 04/19/03 (2)
        • Yea, I cut my struts with a sawzall and the car , - Jefflee 23:59:36 04/19/03 (0)
        • Thanks for the info... - Eric 10:28:05 04/19/03 (0)
• relays, wiring dilemma - John F. Forbey 22:53:58 04/18/03 (0)
• Strut groan - T.Han 17:36:43 04/18/03 (6)
  • Re: Strut groan - Randy 14:43:21 04/20/03 (0)
  • Re: Strut groan - Mike W. 00:11:46 04/19/03 (3)
    • also filter - Peter Florance 10:01:57 04/19/03 (2)
      • Re: also filter - Canada Karl 06:32:09 04/21/03 (0)
      • Re: also filter - T.Han 15:48:36 04/19/03 (0)
  • Sounds like something you get from>>> - Lars Olbimmerguy 20:46:45 04/18/03 (0)
• See below..I need parts - Steve C. 17:24:10 04/18/03 (1)
  • Re: See below..I need parts - Phil M 10:45:08 04/19/03 (0)
• Have I got a whopper for you - Steve C. 17:21:56 04/18/03 (8)
  • Well, my Father always taught me . . . - John in Simi Valley 17:41:03 04/21/03 (0)
  • Never carry a loan for friends or family... (nt) - Kristopher Barrett 17:07:23 04/21/03 (0)
  • I am owed $1200 on a Taurus - BillW 10:12:50 04/21/03 (0)
  • Re: Have I got a whopper for you - Lou in Denver 10:45:46 04/19/03 (0)
  • Re: Have I got a whopper for you - Mr. Coffey 23:13:58 04/18/03 (0)
  • I feel your pain same thing happened to me !!! - Stan 21:28:28 04/18/03 (0)
  • Re: Have I got a whopper for you - justin webster 17:51:29 04/18/03 (1)
    • Re: Have I got a whopper for you - aaron 04:47:02 04/19/03 (0)
• 5spd Conversion Project Wiring Dilemma - Canada Karl 17:11:42 04/18/03 (0)
• automatic tranny bolts... - justin webster 17:03:48 04/18/03 (2)
  • Re: automatic tranny bolts... - justin webster 18:18:59 04/18/03 (1)
    • I think there are 7 total... - Tom in MO 11:36:37 04/21/03 (0)
• Midwest Vintage BMW fest on May 10.... - Tom in MO 14:06:17 04/18/03 (2)
  • Re: Midwest Vintage BMW fest on May 10.... - pumpkin 16:26:42 04/18/03 (1)
    • Link to site.... - Tom in MO 07:18:23 04/21/03 (0)
• carpet - Jamie Seattle 12:23:06 04/18/03 (7)
  • Aftermarket Carpet and Happy Easter - Wietse 11:01:45 04/20/03 (0)
  • Re: carpet - Troy Rudolph 16:36:40 04/18/03 (2)
    • Re: More! - Al from Oz 04:59:27 04/19/03 (0)
    • If you do this... - Jeff C 17:17:07 04/18/03 (0)
  • What color? (nt) - james 14:47:01 04/18/03 (2)
    • Re: What color? (nt) - Jamie Seattle 15:14:30 04/18/03 (1)
      • Re: What color? (nt) - james 01:28:26 04/19/03 (0)
• Sluggish fuel gauge. Ideas? - KSB in VA 09:49:44 04/18/03 (2)
  • Re: Sluggish fuel gauge. Ideas? - Phil M 22:41:14 04/19/03 (0)
  • Re: Sluggish fuel gauge. Ideas? - justin webster 10:57:32 04/18/03 (0)
• 77 530i FS - Jamie Seattle 08:00:05 04/18/03 (0)
• Electric Side Mirrors - Jeff 06:32:54 04/18/03 (7)
  • Re: Electric Side Mirrors - Kristopher Barrett 11:32:35 04/18/03 (5)
    • Re: Electric Side Mirrors - Canada Karl 16:45:14 04/19/03 (0)
    • Re: Electric Side Mirrors - Jeff 17:30:09 04/18/03 (2)
      • Re: Electric Side Mirrors - Kristopher Barrett 17:01:28 04/21/03 (0)
      • Re: Electric Side Mirrors - Canada Karl 18:03:08 04/18/03 (0)
    • These would be door mounted... - Tulsa Dave 11:51:32 04/18/03 (0)
  • Re: Electric Side Mirrors - stewart 11:06:08 04/18/03 (0)
• Engine Running woes......Resolved!! - Tom M 23:42:48 04/17/03 (1)
  • Re: Engine Running woes......Resolved!! - Matt C 06:01:20 04/18/03 (0)
• BMW marine engine - mikey 22:13:38 04/17/03 (4)
  • Re: BMW marine engine - Troy Rudolph 22:52:44 04/17/03 (3)
    • what is the carb on the pictured engine? - ckn 00:34:09 04/20/03 (0)
    • Re: BMW marine engine - Aaron 05:50:06 04/18/03 (1)
      • No smog req coupled with simpler system NT - Misha 12:14:08 04/18/03 (0)
• Dull chrome - Matt C 20:30:59 04/17/03 (2)
  • Mother's Chrome Polish - ChuckNC 10:55:20 04/21/03 (0)
  • Re: Dull chrome - T.Han 23:33:19 04/17/03 (0)
• Driveshaft Questions? - Canada Karl 19:34:13 04/17/03 (2)
  • Re: Driveshaft Questions? - Mike W. 21:02:54 04/17/03 (1)
    • my .02 - stewart 10:13:26 04/18/03 (0)
• 320iS steering wheel? - Canada Karl 14:19:27 04/17/03 (6)
  • Re: 320iS steering wheel? - Eric Q 00:27:25 04/18/03 (2)
    • Re: 320iS steering wheel? - Canada Karl 08:35:56 04/18/03 (1)
      • Re: 320iS steering wheel? - Eric Q 14:03:53 04/18/03 (0)
  • Re: 320iS steering wheel? - Bob 17:56:49 04/17/03 (2)
    • Re: 320iS steering wheel? - Canada Karl 19:22:59 04/17/03 (1)
      • Re: 320iS steering wheel? - Mike W. 21:08:44 04/17/03 (0)
• e12 m535i spoiler ebay.de - james 13:03:58 04/17/03 (4)
  • Re: e12 m535i spoiler ebay.de - Lee Cornett 13:42:59 04/20/03 (0)
  • Re: e12 m535i spoiler ebay.de - T.Han 23:42:39 04/17/03 (2)
    • exchange rate is.... - Nick, CO 05:49:14 04/18/03 (0)
    • exchange rates... - james 01:41:25 04/18/03 (0)
• Throttle Control Switch Install: Advice Needed - Misha 12:15:29 04/17/03 (2)
  • Re: Throttle Control Switch Install: Advice Needed - Klaus 13:13:24 04/17/03 (0)
  • Re: Throttle Control Switch Install: Advice Needed - Matt C 13:07:55 04/17/03 (0)
• windsrceens - christopher blagonic 08:24:28 04/17/03 (1)
  • yes - Peter Florance 08:28:50 04/17/03 (0)
• ignition system - christopher blagonic 08:23:57 04/17/03 (3)
  • Re: ignition system - Walt Barie 11:50:34 04/17/03 (0)
  • Re: ignition system - justin webster 11:18:56 04/17/03 (1)
    • Re: ignition system - justin webster 11:55:01 04/17/03 (0)
• Guibo vs Jurid vs Godzilla - Canada Karl 05:48:32 04/17/03 (7)
  • Get a bunch of dryer vent clamps - Lars Olbimmerguy 15:31:44 04/18/03 (2)
    • Re: Get a bunch of dryer vent clamps - Canada Karl 17:03:21 04/18/03 (1)
      • Great tip... Have to remember that one. - Lars OBG 20:07:52 04/18/03 (0)
  • Re: Guibo vs Jurid vs Godzilla - Jim Ockner 18:55:47 04/17/03 (1)
    • Re: Guibo vs Jurid vs Godzilla - Canada Karl 19:25:51 04/17/03 (0)
  • Re: Guibo vs Jurid vs Godzilla - Walt Barie 11:59:02 04/17/03 (0)
  • Re: Guibo vs Jurid vs Godzilla - Peter Florance 05:53:16 04/17/03 (0)
• 5er Fest 2003 Update! - Christine 20:55:28 04/16/03 (0)
• First autocross sunday. Advice? - Peter Florance 20:25:38 04/16/03 (13)
  • Thanks for all the advice - Peter Florance 10:00:32 04/19/03 (0)
  • Re: First autocross sunday. Advice? - Eric Q 01:17:20 04/18/03 (1)
    • sway bar settings - Peter Florance 06:03:43 04/18/03 (0)
  • Weight Reduction Tips: 8lbs/gallon - Misha 19:32:47 04/17/03 (6)
    • My .02 - Karl in KS 16:46:42 04/18/03 (1)
      • One other thing... - Karl 16:48:06 04/18/03 (0)
    • tire pressure - Peter Florance 06:01:44 04/18/03 (3)
      • Re: tire pressure - Eric Q 02:51:58 04/19/03 (1)
        • More comments... - Eric Q 03:10:19 04/19/03 (0)
      • Heavy cars will do that - Misha 12:12:33 04/18/03 (0)
  • Re: First autocross sunday. Advice? - KSB in VA 14:14:14 04/17/03 (0)
  • Re: First autocross sunday. Advice? - Don Daynes 10:27:25 04/17/03 (0)
  • Re: First autocross sunday. Advice? - Jim 21:03:15 04/16/03 (0)
• should I or shouldn't I get an E28 5er? - Frank H 19:52:03 04/16/03 (4)
  • This is not a typical E28 - BillW in STL 09:44:41 04/17/03 (0)
  • Re: should I or shouldn't I get an E28 5er? - Eric Q 20:09:35 04/16/03 (2)
    • P.S. If you want an E28 turbo... - Eric Q 01:23:16 04/18/03 (1)
      • Re: P.S. If you want an E28 turbo... - Frank H 10:28:15 04/18/03 (0)
• Sorry about the double posts( nt) - Canada Karl 19:21:37 04/16/03 (0)
• Chrome side mirrors??? - Canada Karl 18:49:15 04/16/03 (2)
  • Re: Chrome side mirrors??? - Phil 18:57:36 04/17/03 (0)
  • Re: Chrome side mirrors??? - Mike W. 23:52:23 04/16/03 (0)
• Chrome side mirrors??? - Canada Karl 18:48:59 04/16/03 (1)
  • Re: Chrome side mirrors-bought on Ebay - Brian in Mtl. 13:46:01 04/17/03 (0)
• Long Rant - ChuckNC 17:15:41 04/16/03 (4)
  • Take the clue from his wife..... - Lars Bend Or 18:01:12 04/17/03 (0)
  • Careful, - Mike W. 00:03:02 04/17/03 (1)
    • Re: Careful, - Kristopher Barrett 11:02:06 04/18/03 (0)
  • Re: Long Rant - Canada Karl 18:13:35 04/16/03 (0)
• Panelbeating update - Andrew 17:08:36 04/16/03 (1)
  • Which wrecker, Andrew? - Remy Davison 08:52:40 04/17/03 (0)
• Vacuum Advance/Retard - Jeff 16:36:44 04/16/03 (2)
  • Ljet FAQ - Peter Florance 16:57:23 04/16/03 (1)
    • Re: Ljet FAQ - Jeff 17:08:54 04/16/03 (0)
• Car stalls as if it was out of gas??? - Steve 10:46:17 04/16/03 (2)
  • Re: Car stalls as if it was out of gas??? - maria 16:31:45 04/16/03 (0)
  • Sounds like the fuel pressure regulator - Matt C 12:38:41 04/16/03 (0)
• New Budget AC Repair FAQ - Peter Florance 07:59:18 04/16/03 (2)
  • Nice FAQ ! - Peter Claassen 19:12:30 04/16/03 (1)
    • not my thoughts.. - Peter Florance - First Fives Dictator for Life 19:35:12 04/16/03 (0)
• Shorten gearshift throw? - Canada Karl 06:21:21 04/16/03 (1)
  • Re: Shorten gearshift throw? - Jeff C 07:57:43 04/16/03 (0)
• Metric Mechanic Engines... - justin webster 00:29:11 04/16/03 (2)
  • Re: Metric Mechanic Engines... - Mark 20:57:55 04/16/03 (0)
  • Re: Metric Mechanic Engines... - Troy Rudolph 10:04:23 04/16/03 (0)
• Engine running woes!!!!! - Tom M. 23:00:49 04/15/03 (7)
  • If you push AFM in - Peter Florance 06:14:41 04/16/03 (2)
    • Re: If you push AFM in - Tom M. 07:08:13 04/16/03 (1)
      • Re: If you push AFM in - Peter Florance 11:48:54 04/16/03 (0)
  • Re: Engine running woes!!!!! - Blair 01:55:35 04/16/03 (3)
    • Re: Engine running woes!!!!! - Canada Karl 05:46:05 04/16/03 (2)
      • Just got done doing this and the car runs great - Matt C 13:50:20 04/16/03 (1)
        • silly question...... - Matt C 14:01:47 04/16/03 (0)
• Timing mark bounces - Matt C 17:57:19 04/15/03 (2)
  • Re: Timing mark bounces - Jeff 01:43:09 04/16/03 (0)
  • Re: Timing mark bounces - justin webster 23:53:17 04/15/03 (0)
• Need Driveshaft Advice(long) - Canada Karl 17:36:08 04/15/03 (8)
  • Re: Need Driveshaft Advice(long) - Frank H 20:58:10 04/15/03 (5)
    • Re: Need Driveshaft Advice(long) - Canada Karl 18:01:53 04/16/03 (0)
    • Re: Need Driveshaft Advice(long) - Canada Karl 18:00:26 04/16/03 (0)
    • I am using my old auto driveshaft. - Jeff C 08:07:08 04/16/03 (1)
      • Re: I am using my old auto driveshaft. - Canada Karl 18:15:10 04/16/03 (0)
    • Re: Need Driveshaft Advice(long) - Canada Karl 05:21:47 04/16/03 (0)
  • Automatic Might Work - Chris 20:30:49 04/15/03 (1)
    • Automatic will Work - rick 20:58:22 04/15/03 (0)
• Anyone need E28 Recaro's? - Luke 16:55:29 04/15/03 (0)
• Stoplight upgrade - Al from Oz 16:52:04 04/15/03 (0)
• Exhaust note, reactors verses bavarias. - Matt C 16:45:29 04/15/03 (2)
  • Re: Exhaust note, reactors verses bavarias. - Canada Karl 05:33:16 04/16/03 (1)
    • So far so good. - Matt C 13:54:00 04/16/03 (0)
• Stereo wiring colour codes - Rockwell 16:35:05 04/15/03 (1)
  • just rewire it - mikey 19:24:10 04/15/03 (0)
• An E12 site - Remy Davison 10:03:14 04/15/03 (0)
• April 26th Event - William 08:17:34 04/15/03 (0)
• Last chance radiator... - Lenny D. 00:26:38 04/15/03 (1)
  • maybe try this... - Lenny D. 00:29:41 04/15/03 (0)
• Value of intstalling a front stress bar - Misha 21:29:14 04/14/03 (6)
  • Re: Value of intstalling a front stress bar - Eric Q 14:03:16 04/15/03 (0)
  • Re: Value of intstalling a front stress bar - Troy Rudolph 21:40:39 04/14/03 (4)
    • Are you running stock bars or ST - Misha 11:13:48 04/15/03 (1)
      • Re: Are you running stock bars or ST - Troy Rudolph 12:51:01 04/15/03 (0)
    • Re: Value of intstalling a front stress bar - Blair 00:52:13 04/15/03 (1)
      • Drilling required. Karl K? - Troy Rudolph 08:45:38 04/15/03 (0)
• E12 Abuse... - Tulsa Dave 19:06:16 04/14/03 (1)
  • Re: E12 Abuse... - Mr. Coffey 00:36:13 04/15/03 (0)
• FS: 77 530i $200 - Kaveman 18:23:17 04/14/03 (0)
• Nice '81 E12 for sale - Mr. BILL 18:07:21 04/14/03 (2)
  • Re: Nice '81 E12 for sale - Gustavo 21:15:45 04/14/03 (0)
  • You'll be back...NT - Misha 20:49:19 04/14/03 (0)
• Mega update - Peter Florance 17:54:12 04/14/03 (4)
  • So is it worth it? - justin webster 12:29:05 04/15/03 (3)
    • Possibly - Peter Florance 14:48:47 04/15/03 (2)
      • any fuel milage data yet? - Matt C 16:37:22 04/15/03 (1)
        • Not from me - Peter Florance 05:58:28 04/17/03 (0)
• :( (long) - Andrew 17:36:59 04/14/03 (10)
  • Claim compensation from the Council - Remy Davison 09:55:03 04/15/03 (1)
    • Re: Claim compensation from the Council - Cristian of the bent wheels 18:46:32 04/16/03 (0)
  • Re: :( (long) - Aaron 22:01:24 04/14/03 (4)
    • Victorian v. Tasmanian roads - ckn 22:56:42 04/14/03 (3)
      • Re: Victorian v. Tasmanian roads - Nath in Tassie 01:12:09 04/16/03 (2)
        • Re: Victorian v. Tasmanian roads - ckn 00:39:48 04/20/03 (1)
          • Re: Victorian v. Tasmanian roads - Nath in Tassie 21:06:19 04/22/03 (0)
  • I know how you feel - Cristian In Sydney 19:47:56 04/14/03 (1)
    • You guys have got to move north.! - Al from Oz 20:41:42 04/14/03 (0)
  • Re: :( (long) - Cristian in Sydney 19:42:06 04/14/03 (0)
• Thank you all, Im back up and running. - Matt C 17:14:48 04/14/03 (1)
  • Re: Thank you all, Im back up and running. - justin webster 12:16:17 04/15/03 (0)
• Got my drip rail trim on - Luke 13:51:42 04/14/03 (1)
  • Re: Got my drip rail trim on - Al from Oz 20:55:10 04/14/03 (0)
• a/c & rim/tyre update.. Long - Mark 11:35:14 04/14/03 (0)
• exaust fumes - james grant 03:50:07 04/14/03 (2)
  • Re: exhaust fumes - Troy Rudolph 15:04:45 04/14/03 (0)
  • Not to common - Misha 13:14:40 04/14/03 (0)
• Melb e12 get together Sat May 10th. - ckn 02:34:09 04/14/03 (5)
  • Re: Melb e12 get together Sat May 10th. - Nath in Tassie 01:17:20 04/16/03 (0)
  • Re: Melb e12 get together Sat May 10th. - Al from Oz 20:48:21 04/14/03 (0)
  • count me in for Sat May 10th. - Cristian In Sydney 19:33:30 04/14/03 (0)
  • Good thinking, Chris - Remy Davison 08:56:23 04/14/03 (0)
  • Re: Melb e12 get together Sat May 10th. - Aaron 08:39:42 04/14/03 (0)
• L-jet on ebay - BIGERIK 23:14:43 04/13/03 (0)
• What Rear windows fit ???? - Cristian in Sydney - Oz 16:43:55 04/13/03 (3)
  • 77-88... cabins the same from firewall to - Lars Olbimmerguy 17:33:24 04/14/03 (0)
  • Re: What Rear windows fit ???? - Remy Davison 09:36:20 04/14/03 (0)
  • Re: What Rear windows fit ???? - Peter Florance 20:32:01 04/13/03 (0)
• Parts CD Availability - Misha 16:12:08 04/13/03 (2)
  • Re: Parts CD Availability - Troy Rudolph 17:33:24 04/13/03 (1)
    • No more BMW parts at Rocky Mountain????` - Tom in MO 11:43:40 04/14/03 (0)
• Dancing temp gage\Faulty oil psi light. - Matt C 14:33:44 04/13/03 (1)
  • 1 down 1 to go. - Matt C 17:25:39 04/13/03 (0)
• Good day today with the car - Matt C 14:16:18 04/13/03 (0)
• shudder at 20 mph - ...tom 13:44:22 04/13/03 (6)
  • Re: shudder at 20 mph - Dusan Vacval 12:25:07 04/14/03 (0)
  • Re: shudder at 20 mph - Jim Hineline 22:56:06 04/13/03 (0)
  • Parking Brake: - Troy Rudolph 17:31:35 04/13/03 (0)
  • Re: shudder at 20 mph - Peter Florance 14:59:46 04/13/03 (2)
    • guibo and bearing look okay, next? - ...tom 15:20:13 04/13/03 (1)
      • Re: guibo and bearing look okay, next? - Matt C 17:23:21 04/13/03 (0)
• Went to CCA Car Control Clinic good & bad news - rick 10:48:12 04/13/03 (1)
  • I agree with you on the school - Jeff C 19:45:45 04/13/03 (0)
• Taillight question - Al from Oz 22:37:38 04/12/03 (3)
  • Fog lights!!! - Al from Oz 23:33:57 04/12/03 (2)
    • Re: Fog lights!!! - ChuckNC 09:35:08 04/13/03 (1)
      • Additional stoplights - Al from Oz 17:34:00 04/13/03 (0)
• Observations and questions :) - Matt C 18:32:28 04/12/03 (3)
  • Re: Observations and questions :) - Frank H 21:01:19 04/12/03 (2)
    • Re: Observations and questions :) - Matt C 21:17:50 04/12/03 (1)
      • Spring loaded valve adustment tool. - Matt C 06:37:30 04/13/03 (0)
• Ran the beast today! - Matt C 18:23:48 04/12/03 (0)
• removing the engine - justin webster 16:28:16 04/12/03 (4)
  • Re: removing the engine - Mike W. 17:37:34 04/12/03 (3)
    • Re: removing the engine - Gustavo 21:19:16 04/14/03 (0)
    • Re: removing the engine - phil M 00:14:05 04/13/03 (0)
    • Re: removing the engine - justin webster 22:48:38 04/12/03 (0)
• Car of the Month - April 2003 - Troy Rudolph (Webmaster) 12:48:28 04/12/03 (1)
  • Re: Car of the Month - April 2003 - Jim Davis 12:55:35 04/12/03 (0)
• Fuel line questions - Brian in Abilene 12:18:06 04/12/03 (7)
  • Re: Fuel line questions - Fred Fermin (SF,CA) 13:49:58 04/12/03 (6)
    • Email recieved. Thanks very much. (more) - Brian in Abilene 15:03:21 04/12/03 (5)
      • No, more - Mike W. 17:46:49 04/12/03 (4)
        • Did the job last year - Matt C 19:42:25 04/12/03 (3)
          • So does anyone know what might be causing the miss - Brian in Abilene 16:43:42 04/14/03 (2)
            • Re: So does anyone know what might be causing the miss - Peter Florance 16:45:40 04/14/03 (1)
              • No, this is new to me? What's a stuck injector... - Brian in Abilene 08:05:23 04/15/03 (0)
• Lockmotor FAQ updated - Peter Florance - First Fives Dictator for Life 10:47:52 04/12/03 (0)
• Good Place to get Head reworked in Bay Area? - JB 08:44:47 04/12/03 (3)
  • Re: Good Place to get Head reworked in Bay Area? - Bob in San Jose 16:47:36 04/12/03 (0)
  • If you can make it to the north bay - Mike W. 16:24:57 04/12/03 (0)
  • Re: Good Place to get Head reworked in Bay Area? - Peter Florance 10:57:03 04/12/03 (0)
• E34 seats FAQ - Jeff C 00:40:22 04/12/03 (2)
  • Looks great to me - Al from Oz 04:04:06 04/12/03 (1)
    • Inregards to the rears... - Jeff C 06:56:36 04/12/03 (0)
• Cylinder head rocker assemblies.....A pain in the - Matt C 19:11:04 04/11/03 (0)
• Hoping to make some good noise tommorow...(long) - Matt C 18:50:53 04/11/03 (0)
• This bulletin board is - maria 18:48:28 04/11/03 (5)
  • What about a... - Randy 76/530 17:16:50 04/12/03 (1)
    • What is it about the e12's?... - maria 12:41:45 04/14/03 (0)
  • Nothing wrong with Chevy's! - Nick, CO 04:49:32 04/12/03 (0)
  • A Tahoe? You're breaking my heart! - Tulsa Dave 20:16:47 04/11/03 (1)
    • now wait a minute there son... - maria 15:27:23 04/12/03 (0)
• 4Spd to 5spd Conversion Question - Canada Karl 18:17:34 04/11/03 (1)
  • Re: 4Spd to 5spd Conversion Question - Troy Rudolph 19:17:45 04/11/03 (0)
• TIS Cd for E12? - Kaveman 18:06:42 04/11/03 (1)
  • Re: TIS Cd for E12? - BC Neil 23:52:28 04/14/03 (0)
• Downpipe Shipping Charges OUCH! - Canada Karl 16:09:51 04/11/03 (3)
  • Also... are Trailways or Greyhound in Canada? - Lars OBG 16:00:43 04/12/03 (0)
  • AMTRAK???? - Lars OBG 15:57:24 04/12/03 (0)
  • try fedex ground... - ...tom 17:04:48 04/11/03 (0)
• Downpipe Shipping Charges OUCH! - Canada Karl 16:09:37 04/11/03 (2)
  • Re: Downpipe Shipping Charges OUCH! - Frank H 18:42:35 04/11/03 (0)
  • Re: Downpipe Shipping Charges OUCH! - Matt C 18:30:05 04/11/03 (0)
• Idle rpm drops - Allan A 12:54:15 04/11/03 (2)
  • Re: Idle rpm drops - Karl in KS 16:41:47 04/11/03 (0)
  • Re: Idle rpm drops - Jamie Seattle 14:50:42 04/11/03 (0)
• Heater Controls Rebuild FAQ in the works (more) - Peter Florance 06:15:00 04/11/03 (2)
  • Re: Heater Controls Rebuild FAQ in the works (more) - Karl in KS 16:46:57 04/11/03 (0)
  • Great, I need to do that pronto! - Luke 14:24:34 04/11/03 (0)
• Lowering springs - T.Han 00:09:48 04/11/03 (8)
  • Korman sells them - Adam Wilson 12:16:07 04/13/03 (0)
  • Re: Lowering springs - Karl in KS 16:51:43 04/11/03 (2)
    • You da man! - Tulsa Dave 20:21:23 04/11/03 (1)
      • Re: You da (cheep)man! - Karl in KS 17:20:32 04/12/03 (0)
  • Shox.com claims to have Suspension Techniques - Tulsa Dave 10:15:11 04/11/03 (0)
  • Re: Lowering springs - justin webster 00:17:55 04/11/03 (2)
    • Re: Lowering springs - justin webster 00:21:37 04/11/03 (1)
      • Re: Lowering springs - rick 00:34:51 04/11/03 (0)
• Spoilers, air dams - T.Han 00:07:40 04/11/03 (6)
  • Re: Spoilers, air dams - Mike 13:49:17 04/11/03 (1)
    • BMP bodykit pics? - Nick, CO 04:52:21 04/12/03 (0)
  • Re: Spoilers, air dams - Jamie Seattle 12:35:31 04/11/03 (0)
  • M-Tech Spoilers, air dams - BillW 11:16:36 04/11/03 (0)
  • Re: Spoilers, air dams - Mark Phillips 01:32:19 04/11/03 (0)
  • Re: Spoilers, air dams - Mr. Coffey 00:16:39 04/11/03 (0)
• manual window cranks - marc79 euro635 23:13:35 04/10/03 (0)
• rear tire wear - stewart 22:40:57 04/10/03 (5)
  • Re: tire wear - Karl in KS 17:05:41 04/11/03 (0)
  • Re: rear tire wear - Troy Rudolph 22:51:58 04/10/03 (3)
    • Re: rear tire wear - Canada Karl 08:48:27 04/11/03 (0)
    • What about front tyre wear? - Nath in Tassie 00:55:56 04/11/03 (1)
      • Re: What about front tyre wear? - Troy Rudolph 08:28:27 04/11/03 (0)
• bosch motronic and L-jet part numbers - Frank H 22:39:05 04/10/03 (2)
  • I think these are for Euro cars - 3.5cs 19:45:39 04/12/03 (0)
  • Re: bosch motronic and L-jet part numbers - Matt C 23:04:17 04/10/03 (0)
• Jefflee - Jake Hall 20:09:13 04/10/03 (0)
• Top trans bolt conundrum! - Canada Karl 17:44:34 04/10/03 (7)
  • I use rubber gloves.... - Lars Olbimmerguy 12:05:32 04/13/03 (0)
  • Re: Top trans bolt conundrum! - Mike V 09:28:18 04/11/03 (0)
  • It's not as bad as you think... - Jeff C 07:34:17 04/11/03 (0)
  • Is it that much harder on the 5speed than the auto - Tom in Mo 07:32:24 04/11/03 (2)
    • Re: Is it that much harder on the 5speed than the auto - Canada Karl 15:39:08 04/11/03 (1)
      • Re: Is it that much harder on the 5speed than the auto - rick 21:55:48 04/11/03 (0)
  • it's definately a bugger - stewart 22:32:45 04/10/03 (0)
• Ebay Auction - Lou in Denver 13:28:34 04/10/03 (1)
  • Cool color - Luke 15:37:31 04/10/03 (0)
• 5er Fest - Jake Hall 12:54:22 04/10/03 (12)
  • Pre-empted by a wedding - Karl in KS 17:09:05 04/11/03 (0)
  • I'm going (nt) - Robert Bondi 23:38:47 04/10/03 (0)
  • Was gonna try but... - Eric Q 22:01:21 04/10/03 (0)
  • What is the date? - Ryan Bryan 20:25:56 04/10/03 (1)
    • Re: What is the date? - Jake Hall 20:54:18 04/10/03 (0)
  • Re: 5er Fest - Peter Florance - First Fives Dictator for Life 19:27:25 04/10/03 (0)
  • Re: 5er Fest - Lee Cornett 18:48:48 04/10/03 (0)
  • Too far away... - Frank H 18:35:00 04/10/03 (0)
  • Re: 5er Fest - Jake Hall 15:47:54 04/10/03 (0)
  • I'm going!! - Lyle in NC 15:21:32 04/10/03 (0)
  • Planning on it... (nt) - Tulsa Dave 14:56:44 04/10/03 (0)
  • I will be trying to get there - Sam Schultz 14:39:25 04/10/03 (0)
• Err.... - Kristopher Barrett 11:44:08 04/10/03 (9)
  • What a pig - Tara 17:24:21 04/10/03 (1)
    • is that a speedometer... - Peter Florance 17:49:33 04/10/03 (0)
  • Re: Err.... - Al from Oz 17:05:53 04/10/03 (0)
  • Thats pretty bad but... - justin webster 16:54:30 04/10/03 (4)
    • My '80 had cloth seats... - Tulsa Dave 07:14:40 04/11/03 (0)
    • Re: Thats pretty bad but... - Bob in San Jose 21:13:23 04/10/03 (2)
      • Re: my 79 also had cloth seats......NT - Blair 00:40:51 04/11/03 (1)
        • seat cloth wanted - matt d 04:24:42 04/12/03 (0)
  • Wonder what happens when engine temp gets hot... - Misha 11:48:13 04/10/03 (0)
• GDI/Transpro Radiator... - Lenny D. 10:43:06 04/10/03 (0)
• Headers - Maurice 08:36:27 04/10/03 (2)
  • Good score. aka Bavaria manifolds - BillW 11:19:02 04/11/03 (0)
  • Re: Headers - Troy Rudolph 09:34:34 04/10/03 (0)
• Will Chrome E-12 door handles fit on E-28?? - Aaron 01:29:24 04/10/03 (2)
  • Re: Will Chrome E-12 door handles fit on E-28?? - Tom M 20:51:42 04/10/03 (0)
  • yep, but be careful to soak the screws so you ... - ...tom 05:09:45 04/10/03 (0)
• Lars was right... always satisfying to see..... - Canada Karl 20:54:46 04/09/03 (1)
  • Take the intake runners off. (nt) - Jeff C 08:19:36 04/10/03 (0)
• suspension bushings - marc79euro635 20:47:01 04/09/03 (4)
  • Re: suspension bushings - Troy Rudolph 09:31:57 04/10/03 (2)
    • Re:K-MAC camber/caster plates - Al from Oz 21:49:20 04/10/03 (1)
      • Re:K-MAC camber/caster plates - Troy Rudolph 22:48:22 04/10/03 (0)
  • Re: suspension bushings - Peter Florance 20:57:20 04/09/03 (0)
• OT- Fellow car guy could use some help - rick 20:11:40 04/09/03 (2)
  • Looks like Korijo will do O.K. - John in Simi Valley 01:11:43 04/10/03 (1)
    • Re: Korijo will do O.K. you guy's are great - rick 23:11:37 04/10/03 (0)
• Another Cold Start Question - JohnN 19:56:11 04/09/03 (8)
  • Re: Queen of No/Cold start - maria 11:55:14 04/10/03 (1)
    • Re: Queen of No/Cold start - JohnN 19:19:54 04/12/03 (0)
  • Thermal Time Switch - Peter florance 20:06:07 04/09/03 (5)
    • Re: Thermal Time Switch sounds like my problem - rick 22:51:45 04/09/03 (4)
      • FPR - Mike W. 23:25:58 04/09/03 (3)
        • FPR - Peter Florance 06:51:44 04/10/03 (2)
          • Mine was inverse temp failure - Mike W. 00:10:56 04/11/03 (0)
          • Re: FPR - rick 23:27:56 04/10/03 (0)
• Paging: Garry Pruter - Misha 18:20:06 04/09/03 (0)
• E12 Doors - Matt D 17:59:46 04/09/03 (3)
  • Re: E12 Doors - Al from Oz 19:33:50 04/11/03 (2)
    • thanks - matt d 04:32:32 04/12/03 (1)
      • Re: thanks - Al from Oz 22:46:29 04/12/03 (0)
• Need a bit more info on bavaria's - Matt C 17:42:37 04/09/03 (10)
  • Re: Need a bit more info on bavaria's - Peter Florance 18:28:29 04/09/03 (9)
    • Re: Need a bit more info on bavaria's - Matt C 20:46:59 04/09/03 (1)
      • Re: Need a bit more info on bavaria's - Canada Karl 21:34:39 04/09/03 (0)
    • Re: Need a bit more info on bavaria's - Canada Karl 20:45:45 04/09/03 (6)
      • euro 528 DP = Bav DP - Peter Florance 20:54:59 04/09/03 (2)
        • Re: euro 528 DP = Bav DP - Frank H 21:30:45 04/09/03 (1)
          • That's good to know - Peter Florance 08:45:36 04/10/03 (0)
      • Re: Need a bit more info on bavaria's - Matt C 20:48:36 04/09/03 (2)
        • Re: Need a bit more info on bavaria's - Canada Karl 15:00:05 04/10/03 (0)
        • correction - Matt C 21:00:22 04/09/03 (0)
• Radiator...(Troy?) - Lenny D. 17:19:18 04/09/03 (3)
  • Radiator.com$280.00ish (NT) - Mark Phillips 11:03:34 04/10/03 (0)
  • Re: Radiator...(Troy?) - Troy Rudolph 09:42:43 04/10/03 (0)
  • Re: Radiator...(Troy?) - Blair 23:02:55 04/09/03 (0)
• Another Sighting - Nick, CO 15:20:23 04/09/03 (0)
• Installing 5 spd....almost there! - Canada Karl 15:18:06 04/09/03 (4)
  • Don't use the pedal until bled - Jeff C 15:33:47 04/09/03 (3)
    • Re: Don't use the pedal until bled - Canada Karl 15:53:22 04/09/03 (2)
      • Re: Don't use the pedal until bled - Peter Florance 16:53:04 04/09/03 (0)
      • Re: Don't use the pedal until bled - Jeff C 16:06:24 04/09/03 (0)
• Oil leak at back of head (weird) - Brad In Texas 12:54:20 04/09/03 (3)
  • Re: Oil leak at back of head (weird) - Robert Bondi 21:40:57 04/09/03 (0)
  • Re: Oil leak at back of head (weird) - Matt C 13:30:55 04/09/03 (1)
    • That was me - billy in SLO 14:09:59 04/09/03 (0)
• 5er Fest e12 Goodies - Christine 10:39:04 04/09/03 (6)
  • more sugestions for places - Sam Schultz 22:20:40 04/09/03 (1)
    • hmm... - Christine 12:56:46 04/10/03 (0)
  • e12 suppliers - Peter Florance 21:12:10 04/09/03 (0)
  • I have a donation for a prize - Jeff C 15:42:41 04/09/03 (2)
    • Cool - everyone: don't whine when there's only e28 goodies!!! - Christine 20:36:01 04/09/03 (1)
      • Look.... - Peter Florance 20:59:34 04/09/03 (0)
• Jeff C... How is the E34 seat project going? (nt) - Tulsa Dave 10:21:56 04/09/03 (6)
  • Oh my is all I can say - Jeff C 12:47:49 04/09/03 (5)
    • Re: Oh my is all I can say - Eddie (Toronto, Ont.Canada) 16:46:45 04/09/03 (2)
      • Are you running a single 3" pipe out the rear - Misha 17:37:25 04/09/03 (1)
        • 2 1/4" exiting with 4" tip - Eddie (Toronto, Ont.Canada) 18:42:00 04/09/03 (0)
    • Thanks for the update... - Tulsa Dave 13:23:31 04/09/03 (1)
      • Check your email Dave. - Jeff C 14:49:21 04/09/03 (0)
• 528i Rear ended last night - Phil M 09:38:50 04/09/03 (5)
  • Re: 528i Rear ended last night - Mark 16:05:07 04/09/03 (0)
  • Re: 528i Rear ended-Check your Tail Lights - Alan A - Northern Calif. 11:20:41 04/09/03 (1)
    • Good Point - Troy Rudolph 11:22:25 04/09/03 (0)
  • Re: 528i Rear ended last night - Troy Rudolph 11:20:39 04/09/03 (0)
  • Re: 528i Rear ended last night - Mike 10:09:07 04/09/03 (0)
• More questions on tranny lines. - Tom in MO 07:55:45 04/09/03 (0)
• Bavaria update, Frank H to the rescue. - Matt C 06:06:06 04/09/03 (0)
• 3.0L rebuild running update - Tom M. 21:59:12 04/08/03 (1)
  • give it a twist - Peter Florance 05:38:48 04/09/03 (0)
• Response from Zane - Zane 21:35:15 04/08/03 (2)
  • Re: Response from Zane - BIGERIK 22:08:38 04/08/03 (1)
    • Re: Response from Zane - Mark 04:08:34 04/09/03 (0)
• Compressing the bumpers. - justin webster 19:30:35 04/08/03 (5)
  • How bout this - BillW 16:09:10 04/10/03 (0)
  • Vise & Pipe Wrench - Troy Rudolph 22:35:08 04/08/03 (1)
    • Easier to go the Euro route - Misha 12:42:13 04/09/03 (0)
  • Re: Compressing the bumpers. - BIGERIK 21:54:17 04/08/03 (1)
    • Re: Compressing the bumpers. - Matt C 07:45:59 04/09/03 (0)
• last bit about Roundel for a while - Adam Wilson 18:50:38 04/08/03 (2)
  • Re: last bit about Roundel for a while - Randy M 76/530 21:18:14 04/08/03 (0)
  • Re: last bit about Roundel for a while - Troy Rudolph (Webmaster) 19:03:31 04/08/03 (0)
• Radio Extension Faceplate. - Kaveman 18:21:03 04/08/03 (5)
  • Re: Radio Extension Faceplate. - Fred Fermin (SF,CA) 20:27:19 04/08/03 (3)
    • Re: Radio Extension Faceplate. - Kaveman 22:13:44 04/08/03 (2)
      • Re: Here is Don's post.... - Tulsa Dave 09:35:01 04/09/03 (0)
      • Under $5 (plus shipping) from Maximillian... - Tulsa Dave 22:42:57 04/08/03 (0)
  • Re: Radio Extension Faceplate. - justin webster 19:37:44 04/08/03 (0)
• Sliding Sun Roof 77 528I - Jeff 18:00:34 04/08/03 (0)
• Problem! - Nath in Tassie 17:51:12 04/08/03 (2)
  • You mean the odometer doesnt work, but the speedo - justin webster 17:58:36 04/08/03 (0)
  • Re: Problem! - Jake Hall 17:56:59 04/08/03 (0)
• mayday madam - Maria 15:33:52 04/08/03 (7)
  • bummer - Peter Floracne 15:51:06 04/08/03 (0)
  • Re: mayday madam - Barry in NJ 15:40:44 04/08/03 (5)
    • Re: where's the car at... - maria 15:45:21 04/08/03 (4)
      • 'fore you do something rash... - Karl in KS 21:39:44 04/08/03 (1)
        • Re: 'fore you do something rash... - maria 22:13:14 04/08/03 (0)
      • how about meeting on your way past delaware? - ...tom 18:33:38 04/08/03 (1)
        • Re: how about meeting on your way past delaware? - maria 22:16:24 04/08/03 (0)
• 3.5 swap final update - billy in SLO 14:15:44 04/08/03 (5)
  • Very Cool! - John in Simi Valley 00:39:00 04/10/03 (0)
  • congrats - Karl in KS 21:33:30 04/08/03 (0)
  • Re: 3.5 swap final update - Kaveman 18:18:09 04/08/03 (0)
  • Now THAT is how an E12 is supposed to look! - Jeff Olson 18:06:58 04/08/03 (0)
  • Re: 3.5 swap final update - justin webster 17:07:08 04/08/03 (0)
• Help!!Need cooling line from tranny to radiator - Tom in MO 13:51:45 04/08/03 (6)
  • I have one from 80 633 E24 - 3.5cs 21:22:09 04/09/03 (0)
  • Re: Help!!Need cooling line from tranny to radiator - Jim Hineline 14:40:56 04/08/03 (0)
  • Parts from an E28 do you any good? - rexmo 14:18:55 04/08/03 (3)
    • Not sure. Peter?Sean?Troy?Bueller?Bueller?..... - Tom in MO 14:24:35 04/08/03 (2)
      • Apparently they're different part numbers, but - rexmo 19:49:38 04/08/03 (0)
      • Re: Not sure. Peter?Sean?Troy?Bueller?Bueller?..... - Peter Florance 15:47:02 04/08/03 (0)
• 43k original mile 530i wrecked - parts available.. - dang 12:56:22 04/08/03 (0)
• Best Price for ST Sway Bars - Misha 11:31:00 04/08/03 (8)
  • Re: Best Price for ST Sway Bars - Karl in KS 21:42:43 04/08/03 (7)
    • Thanks: Purchased a set @ $273.00 - Misha 12:35:47 04/09/03 (6)
      • Re: Thanks: Purchased a set @ $273.00 - Tulsa Dave 13:35:46 04/09/03 (5)
        • 28mm in the front and 22mm in the rear...... - Mishas 17:33:05 04/09/03 (4)
          • Re: 28mm in the front and 22mm in the rear...... - Peter Florance 18:31:22 04/09/03 (2)
            • What size, type and wheel are you running? - Misha 16:37:25 04/10/03 (1)
              • Meant to say tire size and wheel type :( - Misha 16:38:36 04/10/03 (0)
          • Also, $273.00 includes tax and shipping. - Misha 18:14:25 04/09/03 (0)
• anyone in Charlotte, NC... - Greg 10:57:47 04/08/03 (1)
  • How about Thursday Pint Night in Davidson? - Jeff Olson 18:01:55 04/08/03 (0)
• Bavaria's!!!Need a set...yesterday - Matt C 10:49:06 04/08/03 (6)
  • Try posting on the e3 board(roadfly) - billy in SLO 14:10:34 04/08/03 (1)
    • Re: Try posting on the e3 board(roadfly) - Matt C 14:36:51 04/08/03 (0)
  • sorry no Bill Bowes - Peter Florance 13:59:37 04/08/03 (0)
  • paging Bill Bowes - Peter Florance 11:11:38 04/08/03 (2)
    • Hey! - Troy Rudolph 13:40:05 04/08/03 (1)
      • Re: Hey! - MATTC 15:14:28 04/08/03 (0)
• Spring/Shock replacement - Gavin 10:32:23 04/08/03 (1)
  • Re: Spring/Shock replacement - Karl in KS 22:01:30 04/08/03 (0)
• HELP with flooding problem - rick 09:08:28 04/08/03 (1)
  • fuel pressure - Peter Florance 09:21:51 04/08/03 (0)
• Is there anything i should replace... - justin webster 09:03:13 04/08/03 (3)
  • Nothing like the secure feeling you get... - Tulsa Dave 11:30:58 04/08/03 (1)
    • Re: Nothing like the secure feeling you get... - justin webster 17:02:08 04/08/03 (0)
  • lots of cool stuff to replace and check - Sam Schultz 10:08:01 04/08/03 (0)
• Bumpers(better not read this Mike W :-) ) - karl 08:41:19 04/08/03 (2)
  • Re: Bumpers(better not read this Mike W :-) ) - Troy Rudolph 09:21:13 04/08/03 (1)
    • I've done my rears, fronts to follow... - billy in SLO 14:01:38 04/08/03 (0)
• Heater controls FAQ question - Randy M/76 530 06:58:59 04/08/03 (1)
  • Re: Heater controls FAQ question - Peter Florance 08:22:57 04/08/03 (0)
• Poor, abused E12... - Mr. Coffey 23:26:20 04/07/03 (1)
  • Big Bumpers - Mike W. 00:23:23 04/08/03 (0)
• Please pass the A1, my foot is a bit dry... - Wietse 22:22:19 04/07/03 (3)
  • Re: Please pass the A1, my foot is a bit dry... - justin webster 23:46:36 04/07/03 (2)
    • Nice 12er, JW - Remy Davison 09:36:11 04/08/03 (1)
      • Re: Nice 12er, JW - justin webster 19:46:56 04/08/03 (0)
• So how about this Melbourne or Aussie meet then?? - Andrew 20:55:27 04/07/03 (2)
  • C'mon guys !! So how about this Aussie meet then? - Cristian In Sydney 17:43:32 04/09/03 (0)
  • Are E-28s welcome???? - Aaron 22:39:28 04/07/03 (0)
• Heater Controls Rebuild FAQ in the works - Peter Florance - First Fives Dictator for Life 20:46:13 04/07/03 (2)
  • Nice work....mine are sticky at best..... - Dave D 22:24:35 04/07/03 (1)
    • if you notice the difference - Peter Florance 06:50:21 04/08/03 (0)
• Help -- A little off topic sorry - Jeff C 13:44:06 04/07/03 (0)
• How do you tell a good driveshaft ? - Peter Claassen 10:42:52 04/07/03 (2)
  • I don't think an E28 will work - Mike W. 23:22:46 04/07/03 (0)
  • Re: How do you tell a good driveshaft ? - Peter Florance 10:48:04 04/07/03 (0)
• The Dreaded NJ State Inspection: The Results - Tim G in Central NJ 08:42:33 04/07/03 (12)
  • Thanks to all for your help & suggestions! :) n/t - Tim G in Central NJ 12:01:58 04/08/03 (0)
  • Re: The Dreaded NJ State Inspection: The Results - Matt C 20:32:51 04/07/03 (1)
    • '81 528iA w/ 148k (NT) - Tim G in Central NJ 11:50:36 04/08/03 (0)
  • If you raise the CO, the NO will come down and - Jefflee 20:26:48 04/07/03 (0)
  • wipers - Peter Florance 16:02:28 04/07/03 (1)
    • Re: wipers - matt d 17:50:55 04/09/03 (0)
  • Some info - Mike W. 15:09:11 04/07/03 (0)
  • Re: Wipers... - Tulsa Dave 09:51:09 04/07/03 (1)
    • Re: Wipers...Rain X - Peter Claassen 19:52:16 04/07/03 (0)
  • lean - Peter Florance 08:56:42 04/07/03 (2)
    • Damn, I was hoping you'd say "too rich"...more - Tim G in Central NJ 09:23:59 04/07/03 (1)
      • Re: Damn, I was hoping you'd say "too rich"...more - Peter Florance 09:36:42 04/07/03 (0)
• L-Jetronic ECU Pinouts 35 Pins or 25??? - Aaron 08:39:48 04/07/03 (4)
  • e12 Ljet ECU has 35 pins - Peter Florance 08:59:13 04/07/03 (3)
    • Re: e12 Ljet ECU has 35 pins - Aaron 09:09:33 04/07/03 (2)
      • Re: e12 Ljet ECU has 35 pins - Peter Florance 19:52:07 04/07/03 (1)
        • Re: e12 Ljet ECU has 35 pins - Aaron 20:21:17 04/07/03 (0)
• mayday mayday - maria 22:37:45 04/06/03 (7)
  • Re: mayday mayday - Jim Davis 00:11:04 04/07/03 (0)
  • Just taking a stab..... - Scott 22:57:57 04/06/03 (5)
    • No, not the cold start system - Mike W. 23:14:13 04/06/03 (4)
      • Re: No, not the cold start system - maria 11:50:04 04/07/03 (3)
        • Re: No, not the cold start system - Jim Davis 13:25:31 04/07/03 (2)
          • Re: No, not the cold start system - Peter Florance 14:26:11 04/07/03 (0)
          • Coolant temp. sensor and/or GROUND... - Lenny D. 14:25:24 04/07/03 (0)
• Car of the Month - April 2003 - Troy Rudolph 22:04:38 04/06/03 (2)
  • The car looks GREAT but the wheels are wrong... - Jeff Olson 10:20:29 04/07/03 (0)
  • Nice!! - Scott 23:33:54 04/06/03 (0)
• Stupid Questions #371 and #372 - justin webster 21:56:20 04/06/03 (4)
  • Re: Stupid Questions #371 and #372 - Troy Rudolph 22:07:41 04/06/03 (3)
    • Correct, and - Mike W. 23:23:58 04/06/03 (1)
      • My euro was rated 180 hp - Peter Florance 05:56:04 04/07/03 (0)
    • Re: Stupid Questions #371 and #372 - justin webster 23:03:03 04/06/03 (0)
• No start (slightly OT) - ChuckNC 21:28:44 04/06/03 (3)
  • Re: No start (slightly OT) - Peter Florance 06:17:33 04/07/03 (2)
    • Re: No start (slightly OT) - ChuckNC 11:16:06 04/07/03 (1)
      • check - Peter Florance 19:50:49 04/07/03 (0)
• 530i used auto 3spd tans - Michael 17:15:41 04/06/03 (0)
• Car of the month and gallery - Greg J 08:10:23 04/06/03 (2)
  • Re: Car of the month and gallery - Troy Rudolph (Webmaster) 13:47:56 04/07/03 (0)
  • What the??? - Scott 23:36:27 04/06/03 (0)
• Zane's turbo e12 - Mark 05:54:39 04/06/03 (28)
  • 5 series publication - Randy 06:56:05 04/07/03 (1)
    • Re: 5 series publication - Mark 09:55:36 04/07/03 (0)
  • Re: Zane's turbo e12 - Phil Marx 01:34:22 04/07/03 (5)
    • Re: Zane's turbo e12 - Troy Rudolph (Webmaster) 10:22:17 04/07/03 (1)
      • Re: Zane's turbo e12 - Phil Marx 12:04:57 04/07/03 (0)
    • Re: Zane's turbo e12 - Adam Wilson 07:14:34 04/07/03 (1)
      • Re: Zane's turbo e12 - Phil Marx 11:56:51 04/07/03 (0)
    • Re: Zane's turbo e12 - Mark 05:21:27 04/07/03 (0)
  • Well...here is my .02.. - Scott 23:21:12 04/06/03 (0)
  • I take my usual position. - Lars Olbimmerguy 19:19:53 04/06/03 (0)
  • EZ There... - Eric Q 18:31:09 04/06/03 (1)
    • Re: EZ There... - Adam Wilson 19:12:59 04/06/03 (0)
  • We need all the help we can get. - Troy Rudolph 17:11:16 04/06/03 (1)
    • Thought for today. - Al from Oz 17:59:12 04/06/03 (0)
  • Here's the article for all to read plus pics - Adam Wilson 15:35:50 04/06/03 (0)
  • I tried to read the article - Ryan Bryan 14:16:44 04/06/03 (1)
    • Re: I tried to read the article - Adam Wilson 15:21:28 04/06/03 (0)
  • attn Phil Marx if you're reading this, LONG - Adam Wilson 09:48:28 04/06/03 (7)
    • The problem with Roundel. . . - Shifty Brad (from e28 board) 16:35:28 04/06/03 (2)
      • Bummer about your car! - Tulsa Dave 07:32:13 04/08/03 (0)
      • S Brad... - Randy M 76/530 06:38:20 04/08/03 (0)
    • A few more... - Wietse (1975 530i with 125 Satch Carlson HP) 12:41:18 04/06/03 (2)
      • Re: A few more... - Adam Wilson 15:20:04 04/06/03 (0)
      • not to defend Phil's comments, but... - ...tom 13:13:06 04/06/03 (0)
    • Re: attn Phil Marx if you're reading this, LONG - justin webster 11:44:00 04/06/03 (0)
  • Phil's , Zanes car, and the E12 article (long) - Peter Florance - First Fives Dictator for Life 09:01:27 04/06/03 (0)
  • So, how many books has Phil Marx written??? - Al from Oz 06:03:15 04/06/03 (1)
    • Re: So, how many books has Phil Marx written??? - Mark 09:31:50 04/06/03 (0)
• mo' Mega-progress (megasquirt fuel injection) - Peter Florance 22:08:06 04/05/03 (2)
  • coasting fuel shut-off - Troy Rudolph 14:53:57 04/07/03 (1)
    • Megasquirt Progress - Peter Florance 19:30:23 04/07/03 (0)
• Ultimate wedding gift- a new E12! - Greg J 21:21:08 04/05/03 (10)
  • Bring it out West!!! (again) - Eric Q 18:36:36 04/06/03 (1)
    • Re: Bring it out West!!! (again) - Greg J 21:09:55 04/08/03 (0)
  • Welcome aboard! - ChuckNC 06:57:52 04/06/03 (1)
    • Re: Welcome aboard! - Greg J 08:03:30 04/06/03 (0)
  • Re: Ultimate wedding gift- a new E12! - Matt C 22:37:53 04/05/03 (5)
    • Re: Ultimate wedding gift- a new E12! - Greg J 08:06:30 04/06/03 (0)
    • Uh? Matty.. delicate matter here.. Maybe I am old> - Lars Olbimmerguy 23:58:47 04/05/03 (3)
      • LMAOROF!! nt - Scott 18:55:42 04/07/03 (0)
      • Re: Uh? Matty.. delicate matter here.. Maybe I am old> - Matt C 00:09:10 04/06/03 (1)
        • Weeellllll... That's certainly a relief.. and.... - Lars Olbimmerguy 00:14:43 04/06/03 (0)
• Checking injector function?? - Tom M. 20:25:07 04/05/03 (1)
  • Re: Checking injector function?? - Matt C 21:16:10 04/05/03 (0)
• In Tank Pre-Pump Question? - Kaveman 20:05:16 04/05/03 (6)
  • 2 years without prepump, no problems - ...tom 07:26:36 04/07/03 (0)
  • Re: In Tank Pre-Pump Question? - Klaus 23:21:06 04/06/03 (0)
  • Re: In Tank Pre-Pump Question? - pumpkin 19:12:19 04/06/03 (0)
  • Re: In Tank Pre-Pump Question? - Eric Q 23:56:57 04/05/03 (0)
  • Re: In Tank Pre-Pump Question? - Peter Florance 22:09:45 04/05/03 (0)
  • Re: In Tank Pre-Pump Question? - Matt C 21:12:34 04/05/03 (0)
• How much petrol left when the light comes on?? - Andrew 18:12:58 04/05/03 (5)
  • It depends if your in tank pump is working - Mike W. 23:34:44 04/06/03 (0)
  • Not enough... If your transfer pump (in tank) - Lars Olbimmerguy 20:22:14 04/06/03 (0)
  • Re: How much petrol left when the light comes on?? - greghill-phx,az 18:24:04 04/05/03 (2)
    • Re: How much petrol left when the light comes on?? - Andrew 16:54:56 04/06/03 (0)
    • Re: How much petrol left when the light comes on?? - SwampJedi 08:41:26 04/06/03 (0)
• Troy & Peter - Tito 13:52:44 04/05/03 (1)
  • Re: Troy & Peter - Peter Florance 22:07:03 04/05/03 (0)
• mod's for heads & block - tito 23:04:18 04/04/03 (17)
  • Not worth it, but ... - Troy Rudolph 23:34:37 04/04/03 (16)
    • Re: Not worth it, but ... - tito 00:07:58 04/05/03 (15)
      • Where are you? (eom) - Troy Rudolph 14:05:37 04/05/03 (13)
        • Re: Where are you? (eom) - Tito 21:06:10 04/05/03 (12)
          • Pick and Pull - Mike W. 00:18:03 04/06/03 (11)
            • Re: Pick and Pull - Tito 01:08:43 04/06/03 (10)
              • Re: Pick and Pull - Mike W. 20:41:12 04/06/03 (7)
                • Re: Pick and Pull - Tito 00:06:20 04/07/03 (5)
                  • Re: Pick and Pull - Mike W. 21:03:13 04/07/03 (2)
                    • Re: Pick and Pull - Tito 01:27:23 04/08/03 (0)
                    • Forgot to mention - Mike W. 00:07:03 04/08/03 (0)
                  • Re: Pick and Pull - Peter Florance 06:29:16 04/07/03 (1)
                    • Re: Pick and Pull - Tito 01:46:07 04/08/03 (0)
                • Re: Pick and Pull - Tito 23:33:14 04/06/03 (0)
              • engine - Peter Florance 09:42:04 04/06/03 (1)
                • Re: engine - Tito 00:21:43 04/07/03 (0)
      • 3.5L - Peter Florance 05:39:56 04/05/03 (0)
• Brake Switch - Dan Lafley 21:35:30 04/04/03 (1)
  • Move it further... - ChuckNC 10:52:16 04/05/03 (0)
• Need suggestions - E24 Parts - Erik 21:14:18 04/04/03 (2)
  • Lotta traffic and a good bunch over at the - Lars Olbimmerguy 23:35:45 04/04/03 (0)
  • Re: Need suggestions - E24 Parts - Troy Rudolph 21:35:15 04/04/03 (0)
• Spider-Man on demand. - Cindy 21:06:39 04/04/03 (1)
  • complaint sent ( scott@stsim.com ) - spam slammer 22:44:11 04/04/03 (0)
• Valve Cover - Derek 14:51:13 04/04/03 (2)
  • Yes and No - Mike W. 20:43:55 04/04/03 (0)
  • Re: Valve Cover - Frank H 15:51:45 04/04/03 (0)
• Irony (and punny) - Lars Olbimmerguy 14:18:05 04/04/03 (7)
  • Re: Irony (and punny) - Al from Oz 14:57:37 04/04/03 (6)
    • No.. I don't think he could do things differently - Lars Olbimmerguy 15:29:19 04/04/03 (5)
      • Re: No.. I don't think he could do things differently - karl sisson 10:12:03 04/06/03 (1)
        • In all fairness, it all boils down to the - Lars Olbimmerguy 13:00:39 04/06/03 (0)
      • Re: No.. I don't think he could do things differently - karl sisson 16:25:55 04/04/03 (1)
        • maybe if you - mikey 10:16:53 04/05/03 (0)
      • Re: No.. I don't think he could do things differently - Frank H 15:46:15 04/04/03 (0)
• Thanks to all who offered advice. - Tom in Mo 13:37:53 04/04/03 (0)
• Looking for a 3speed auto - Alessandro Corsodoro 13:08:54 04/04/03 (2)
  • Re: Looking for a 3speed auto - Blair 17:22:12 04/04/03 (1)
    • Re: Looking for a 3speed auto - pumpkin 19:29:41 04/06/03 (0)
• I'm in Big Trouble: Need source for used cat.... - Tim G in Central NJ 11:55:35 04/04/03 (9)
  • Thank you all !! :) (n/t) - Tim G in Central NJ 08:20:08 04/07/03 (0)
  • If you can't find a used one - Troy Rudolph 20:21:14 04/04/03 (4)
    • Cool! Hey Troy, how much do you know about... - Tim Gi Central NJ 09:22:08 04/05/03 (2)
      • Re: Cool! Hey Troy, how much do you know about... - Troy Rudolph 14:15:25 04/05/03 (1)
        • www.discountconverter.com (not "converters") - Troy Rudolph 14:17:13 04/05/03 (0)
    • link here - Troy Rudolph 20:23:48 04/04/03 (0)
  • Re: I'm in Big Trouble: Need source for used cat.... - Kristopher Barrett 12:51:07 04/04/03 (0)
  • Re: I'm in Big Trouble: Need source for used cat.... - Greg 12:37:25 04/04/03 (1)
    • Greg, you've got mail - Tim G in Central NJ 13:00:05 04/04/03 (0)
• More on the warm start problem for Lars, etc.... - Tulsa Dave 08:53:00 04/04/03 (3)
  • I'll go with Peter on this one... as he has a ton - Lars Olbimmerguy 12:08:54 04/04/03 (0)
  • Thermal time switch is bad - Peter Florance 09:11:31 04/04/03 (1)
    • That has been my suspicion all along... - Tulsa Dave 15:36:50 04/04/03 (0)
• not to fluff my feathers, but... - Christine 07:56:59 04/04/03 (0)
• Hey e12 Guys! - Christine 21:37:47 04/03/03 (5)
  • Are we no longer going to Spartanburg, SC? - Ryan Bryan 07:34:09 04/04/03 (2)
    • yes - Peter Florance 07:44:45 04/04/03 (1)
      • I mean no - Peter Florance 07:45:15 04/04/03 (0)
  • Boone, NC - Peter Florance - First Fives Dictator for Life 06:04:58 04/04/03 (1)
    • See info below and... - Christine 07:55:41 04/04/03 (0)
• header update - Matt C 20:37:41 04/03/03 (0)
• Brake Lights - Dan Lafley 20:21:22 04/03/03 (1)
  • Re: Brake Lights - ChuckNC 06:39:27 04/04/03 (0)
• E12 VS Bav VS 3.0CSI: Opinions Sought - Misha 18:56:56 04/03/03 (4)
  • Thanks for the input: Decision Reinforced - Misha 11:32:54 04/04/03 (0)
  • Re: E12 VS Bav VS 3.0CSI: Opinions given - Al from Oz 03:49:54 04/04/03 (0)
  • Re: E12 VS Bav VS 3.0CSI: Opinions Sought - Peter Florance 21:19:25 04/03/03 (0)
  • Re: E12 VS Bav VS 3.0CSI: Opinions Sought - Mike W. 21:11:33 04/03/03 (0)
• ebay sale 530i - matt 17:44:16 04/03/03 (0)
• 5 spd shifter linkage.....long - Blair 16:00:00 04/03/03 (1)
  • Re: Read the short shifter faq again... - Tulsa Dave 17:52:29 04/03/03 (0)
• get together - billy in SLO 14:05:27 04/03/03 (1)
  • Re: get together - Eric Q 01:56:27 04/04/03 (0)
• Cold Start Problem - Tom in NY 07:45:20 04/03/03 (2)
  • Re: Cold Start Problem - Matt C 17:38:23 04/03/03 (0)
  • Re: Cold Start Problem - ChuckNC 13:30:29 04/03/03 (0)
• Changing head and camshaft - Mark Schuurman 02:51:56 04/03/03 (1)
  • depends on market I think - Peter Florance 05:28:40 04/03/03 (0)
• 2.8l rebuild - justin webster 23:13:50 04/02/03 (13)
  • Buy my Euro 2.8 - BillW in STL 15:19:59 04/03/03 (3)
    • How Much? - Nick, CO 17:01:10 04/03/03 (2)
      • $200? Free with car?? Its all gotta go. - BillW 15:40:37 04/14/03 (0)
      • not your average 2.8 - Peter Florance 19:25:05 04/04/03 (0)
  • Re: 2.8l rebuild - justin webster 23:15:24 04/02/03 (8)
    • Re: 2.8l rebuild - Mike W. 23:49:38 04/02/03 (7)
      • Agree with Mike... the cost of pistons alone will - Lars Olbimmerguy 00:49:21 04/03/03 (6)
        • Re: Agree with Mike... the cost of pistons alone will - justin webster 14:37:19 04/03/03 (5)
          • Re: Agree with Mike... the cost of pistons alone will - Don Daynes 20:59:55 04/03/03 (4)
            • Re: Agree with Mike... the cost of pistons alone will - justin webster 00:04:52 04/04/03 (3)
              • By all means - Mike W. 00:35:30 04/04/03 (2)
                • Sounds like what I refer to as a "short rebuild" - Lars Olbimmerguy 08:28:23 04/04/03 (1)
                  • I've seen both worn and not - Mike W. 20:54:24 04/04/03 (0)
• still looking for higher res site logos - Peter Florance 22:02:31 04/02/03 (9)
  • That'd be me. - Kevin McD 08:15:40 04/03/03 (5)
    • Since you asked... - Kevin McD 08:37:34 04/03/03 (2)
      • these look great - Peter Florance 10:48:25 04/03/03 (1)
        • My specs - Kevin McD 11:48:15 04/03/03 (0)
    • Very Nice Graphic.... - Dave D in Atl 08:23:57 04/03/03 (1)
      • um... - Kevin McD 08:26:28 04/03/03 (0)
  • Re: still looking for higher res site logos - Eric Q 22:18:36 04/02/03 (2)
    • Randy M. ?/Adam wilson? (nt) - Mark Phillips 00:31:49 04/03/03 (1)
      • Pre-dates me (nt) - Randy M 06:29:33 04/03/03 (0)
• Major problems,please,please sound off!! - Matt C 20:56:17 04/02/03 (5)
  • PO put Bavs on my 77. Same engine compartment - Lars Olbimmerguy 23:49:23 04/02/03 (0)
  • Re: Major problems,please,please sound off!! - Frank H 21:13:33 04/02/03 (3)
    • The RTV - Jeff C 08:34:58 04/03/03 (0)
    • Re: Major problems,please,please sound off!! - Matt C 22:08:33 04/02/03 (1)
      • Re: Major problems,please,please sound off!! - Blair 22:20:00 04/02/03 (0)
• Newly rebuilt 3.0L running problems?? - Tom M 20:18:11 04/02/03 (3)
  • Re: Newly rebuilt 3.0L running problems?? - Tom M 21:50:10 04/08/03 (0)
  • Re: Newly rebuilt 3.0L running problems?? - peter mooney 19:50:57 04/06/03 (0)
  • Re: Newly rebuilt 3.0L running problems?? - Todd 630CSI 01:27:08 04/03/03 (0)
• ROUNDEL!!! - Kevin McD 20:08:48 04/02/03 (4)
  • Re: ROUNDEL!!! - Adam Wilson 10:14:32 04/03/03 (0)
  • Re: ROUNDEL!!! - Kevin McD 20:38:41 04/02/03 (2)
    • That didn't work so well... try these - Kevin McD 20:39:59 04/02/03 (1)
      • Thanks, Kevin...Great to get a chance to read the - Scott 08:23:39 04/03/03 (0)
• Heater Valve! - Preston Frederickson 19:47:33 04/02/03 (6)
  • More Heater Valve questions - Preston Frederickson 11:07:29 04/03/03 (1)
    • Re: More Heater Valve questions - justin webster 19:38:28 04/03/03 (0)
  • Wrench is available if you want it - Jeff C 08:39:26 04/03/03 (1)
    • Jeff, check your email!! - Preston Frederickson 10:44:16 04/03/03 (0)
  • Re: Heater Valve! - Mike W. 23:59:44 04/02/03 (0)
  • Re: Heater Valve! - Mike V 21:39:41 04/02/03 (0)
• power surges - radio - help - Tom in NY 16:17:12 04/02/03 (2)
  • does it go on and off with the brakes? - ...tom 18:41:30 04/02/03 (1)
    • I did all that but still - Peter Florance 20:26:26 04/02/03 (0)
• STEEL WHEELS FOR SALE - FRANK SWIFT 13:13:24 04/02/03 (0)
• Need help! - Matt C 12:26:53 04/02/03 (5)
  • Valve Rotation - Klaus 14:36:41 04/02/03 (0)
  • Re: Need help! - Jeff C 12:45:05 04/02/03 (3)
    • Re: Need help! - Matt C 17:03:41 04/02/03 (0)
    • Mine too... - Wietse 13:41:40 04/02/03 (1)
      • Re: Mine too... - Peter Florance 13:45:48 04/02/03 (0)
• How do you get those darn rocker moldings on? - Randy 11:51:15 04/02/03 (0)
• PART # CHECK, (FPR) - Blair 11:30:32 04/02/03 (1)
  • 0-280-160-014 for '79 528i (eom) - Troy Rudolph 14:44:33 04/02/03 (0)
• OT E28 Factory spoiler for sale - Peter Florance 09:13:37 04/02/03 (2)
  • photo - Peter Florance 13:39:28 04/03/03 (1)
    • Doh!! (link instead) - Peter Florance 13:41:35 04/03/03 (0)
• Paging all Aussie E12er's - chris in melbs 03:14:44 04/02/03 (6)
  • Re: Paging all Aussie E12er's - Cristian in Sydney 15:01:03 04/03/03 (0)
  • I'm in just let me know when and where !! (nt) - Cristian in Sydney 14:57:10 04/03/03 (0)
  • Re: Paging all Aussie E12er's - Nath in Tassie 19:53:23 04/02/03 (0)
  • Re: Paging all Aussie E12er's - Nath in Tassie 19:52:55 04/02/03 (0)
  • Re: Paging all Aussie E12er's - Andrew 16:26:30 04/02/03 (0)
  • Chris, check the archives. - Al from Oz 15:55:23 04/02/03 (0)
• Howbout a mascot? - Tarazona 21:13:33 04/01/03 (3)
  • Re: Howbout a mascot? - Kaveman 09:18:26 04/02/03 (0)
  • runner up - Adam Wilson 09:01:58 04/02/03 (0)
  • Nice dog! - Nath in Tassie 23:53:46 04/01/03 (0)
• Dancing Speedometer... - Klaus 17:35:53 04/01/03 (11)
  • Thanks... - Klaus 14:38:47 04/02/03 (2)
    • even the little piece - Peter Florance 14:39:47 04/02/03 (1)
      • Re: even the little piece - Klaus 23:18:37 04/02/03 (0)
  • Re: Dancing Speedometer... - Kaveman 09:24:12 04/02/03 (0)
  • Re: Dancing Speedometer... - Mike W. 00:25:23 04/02/03 (0)
  • It's the gear. (Jeff C!) - Troy Rudolph 22:24:07 04/01/03 (5)
    • Re: It's the gear. (Jeff C!) - Jake Hall 00:06:28 04/02/03 (4)
      • Don't look at me. I just make gears.,, - Jeff C 09:11:14 04/02/03 (0)
      • Re: It's the cable - Lenny D. 00:27:16 04/02/03 (2)
        • cable likely, I agree - Robert Bondi 01:50:05 04/02/03 (1)
          • I've always used lithium grease on mine... - Tulsa Dave 07:02:28 04/02/03 (0)
• E12's in Boone - erik 17:23:44 04/01/03 (1)
  • Re: E12's in Boone - Jake Hall 00:10:35 04/02/03 (0)
• 3.5 Swap and "whoooaaa" - billy in SLO 17:10:27 04/01/03 (4)
  • Swing by the SharkFest - John in Simi Valley 00:26:18 04/04/03 (0)
  • Re: 3.5 Swap and "whoooaaa" - Kaveman 09:21:21 04/02/03 (0)
  • Re: 3.5 Swap and "whoooaaa" - Jim 19:45:37 04/01/03 (0)
  • Re: 3.5 Swap and "whoooaaa" - Blair 17:12:30 04/01/03 (0)
• E12 Spares in the uk - Matt D 16:43:51 04/01/03 (5)
  • Re: E12 Spares in the uk - james 01:11:08 04/02/03 (4)
    • Re: E12 Spares in the uk - matt d 16:30:55 04/02/03 (2)
      • Re: E12 Spares in the uk - Lee Cornett 21:16:50 04/02/03 (1)
        • Re: E12 Spares in the uk - matt d 06:30:14 04/05/03 (0)
    • Re: E12 Spares in the uk - Lee Cornett 08:40:09 04/02/03 (0)
• My Aux Air Valve is stuck closed - Kristopher Barrett 16:07:06 04/01/03 (2)
  • Re: My Aux Air Valve is stuck closed - Kaveman 09:29:08 04/02/03 (0)
  • Re: My Aux Air Valve is stuck closed - Blair 17:11:34 04/01/03 (0)
• 5er Fest Change & Update... - Tulsa Dave 13:08:03 04/01/03 (14)
  • OH H##L Yeah!!! Boone Rocks! - Scott 08:33:40 04/02/03 (0)
  • I live there now......... - BNC 19:18:38 04/01/03 (7)
    • Here is a pic to wet your appetite....... - BNC 19:41:01 04/01/03 (6)
      • I know that road..... - JB in Boise 12:07:40 04/02/03 (2)
        • LOL!! you speak the truth...nt - Scott 20:09:53 04/02/03 (1)
          • Re: LOL!! you speak the truth...nt - justin webster 23:18:04 04/02/03 (0)
      • The album - BNC 20:59:02 04/01/03 (2)
        • Try this......... - BNC 21:07:50 04/01/03 (1)
          • Re: Try this......... - justin webster 23:37:47 04/01/03 (0)
  • Re: 5er Fest Change & Update... - Jake Hall 16:10:06 04/01/03 (0)
  • last time I was there... - ChuckNC 15:44:34 04/01/03 (1)
    • Erik - Peter Florance 16:06:50 04/01/03 (0)
  • Disappointing... - Eric Q 14:48:20 04/01/03 (0)
  • 5er Fest Site Updated... - Tulsa Dave 13:11:51 04/01/03 (0)
• Bolt pattern on water pump/fan pulley? - rexmo 11:14:33 04/01/03 (7)
  • Re: Bolt pattern on water pump/fan pulley? - Peter Florance 16:47:14 04/01/03 (0)
  • Re: Bolt pattern on water pump/fan pulley? - Troy Rudolph 12:52:24 04/01/03 (0)
  • I honestly cannot tell any difference so far... - Tulsa Dave 11:33:22 04/01/03 (4)
    • Re: I honestly cannot tell any difference so far... - Robert Bondi 23:25:28 04/01/03 (2)
      • remember the little aluminum hub - Peter Florance 05:34:01 04/02/03 (1)
        • Peter is correct... - Tulsa Dave 07:07:52 04/02/03 (0)
    • I have had the 32mm type on all 7 E28's I've had. - rexmo 14:59:58 04/01/03 (0)
• FS: BIG sway bar kit,,tailights,+ other parts..... - Gene 09:23:35 04/01/03 (1)
  • sway bar - Peter Florance 09:35:53 04/01/03 (0)
• Re: Tail light - Rick 08:55:01 04/01/03 (1)
  • ^^^See posting above ^^^ - Gene 09:27:35 04/01/03 (0)
• Look out Lars! April Roundel is out and... - Tulsa Dave 07:33:45 04/01/03 (15)
  • Pride is costly.... Look out wallet. - Lars Olbimmerguy 09:14:34 04/01/03 (14)
    • Re: Pride is costly.... Look out wallet. - Nath in Tassie 00:12:45 04/02/03 (6)
      • Supply-Demand.... I respect what you say... - Lars Olbimmerguy 13:26:11 04/02/03 (3)
        • Re: Supply-Demand.... I respect what you say... - Nath in Tassie 20:11:46 04/02/03 (2)
          • Just go by the book on the tranny. - Lars Olbimmerguy 22:34:26 04/02/03 (1)
            • Thanks Lars! - Nath in Tassie 00:01:33 04/03/03 (0)
      • Parts scarce and none in wrecking yards? - Tulsa Dave 07:10:19 04/02/03 (1)
        • Re: Parts scarce and none in wrecking yards? - Nath in Tassie 20:00:54 04/02/03 (0)
    • okay Lars, I'll call ;>) - ...tom 11:29:40 04/01/03 (6)
      • Well Tom... The shiny paint is on the sides. - Lars Olbimmerguy 13:57:49 04/01/03 (5)
        • Heh...that $700 '81 is mine now..... (nt) - Kristopher Barrett 15:57:34 04/01/03 (0)
        • PS.. Let me clarify one point - Lars Olbimmerguy 14:05:50 04/01/03 (3)
          • Here! Here! - Misha 14:26:41 04/01/03 (2)
            • Now That's HOG Heaven... A Duetto AND a GTV - Lars Olbimmerguy 15:23:26 04/01/03 (1)
              • Speaking of Hog Heaven... - justin webster 17:48:14 04/01/03 (0)
• Boston CCA Chapter Concours d' Elegance - Peter Florance - First Fives Dictator for Life 06:18:12 04/01/03 (1)
  • Boston CCA Site Link - Peter Florance 06:19:30 04/01/03 (0)
• Is it possible to test a used 5-speed? - Mr. Coffey 22:28:45 03/31/03 (4)
  • Yes but it costs about $100 - Jeff C 08:06:26 04/01/03 (0)
  • Sort of - Troy Rudolph 22:37:31 03/31/03 (2)
    • Re: Sort of - Mike W. 23:09:50 03/31/03 (1)
      • Re: Sort of - Mr. Coffey 09:42:51 04/01/03 (0)
• Combo relay........ - Tom 21:45:49 03/31/03 (1)
  • Re: Combo relay........ - Peter Florance 21:51:32 03/31/03 (0)
• could anyone give info on chrome mirrors for e12? - cfisher 12:14:05 03/31/03 (9)
  • What I want is like the car on the home page... - cfisher 19:18:31 03/31/03 (1)
    • You have to drill...... - Mark Phillips 22:02:46 03/31/03 (0)
  • The doors are built for the mirror.... - Lars Olbimmerguy 15:47:30 03/31/03 (2)
    • You are right, but - Mike W. 18:33:53 03/31/03 (1)
      • Oh, thought you were going other direction. my mis - Lars... 18:40:25 03/31/03 (0)
  • Re: could anyone give info on chrome mirrors for e12? - Troy Rudolph 13:15:48 03/31/03 (3)
    • 77 is door-mounted - Robert Bondi 02:10:29 04/02/03 (0)
    • England, OZ, and others - ChuckNC 18:20:21 03/31/03 (1)
      • I got my right side mirror (not chrome) - Tulsa Dave 18:43:36 03/31/03 (0)
• Cheers to you all!!! - ChuckNC 10:55:36 03/31/03 (6)
  • Dude! you cut your hair!!! - Scott 16:34:49 03/31/03 (1)
    • yup. - ChuckNC 21:53:17 03/31/03 (0)
  • Never Give Up!... Ours is a Sacred Trust.... - Lars Olbimmerguy 14:57:46 03/31/03 (0)
  • Perhaps if you switched to German beer - KSBinVA 13:23:27 03/31/03 (0)
  • A Guiness!! - Chris 13:10:16 03/31/03 (0)
  • you don't look too beat down - Peter Florance 11:01:56 03/31/03 (0)
• COTM question, Feb, what are these? (pic) - Adam Wilson 10:18:01 03/31/03 (2)
  • They're rear reflectors (more) - Remy Davison 07:34:06 04/01/03 (0)
  • looks like rear reflectors... (nt) - ChuckNC 11:15:36 03/31/03 (0)
• 1984 533i ....Request Opinions - Derek 09:15:01 03/31/03 (7)
  • Re: 1984 533i ....Request Opinions - Mike W. 18:45:34 03/31/03 (0)
  • Re: 1984 533i ....Request Opinions - Eric Q 14:13:09 03/31/03 (0)
  • Re: 1984 533i ....Request Opinions - Frank H 10:07:30 03/31/03 (0)
  • Re: 1984 533i ....Request Opinions - Troy Rudolph 09:20:29 03/31/03 (3)
    • Re: 1984 533i ....Request Opinions - Mark 13:18:16 03/31/03 (2)
      • Good point, Mark - Remy Davison 07:46:13 04/01/03 (1)
        • My rusty e21 !! - Mark 14:39:35 04/01/03 (0)
• Out of Hibernation and grill question - Randy M/76 530i 08:58:23 03/31/03 (6)
  • Re: Out of Hibernation and grill question - Adam Wilson 10:19:11 03/31/03 (5)
    • I'll take some this week and forward to you... - Randy M/76 530 13:00:34 03/31/03 (4)
      • Re:that euro look - Christian oak,ca 17:28:37 03/31/03 (3)
        • Re:that euro look - Kristopher Barrett 21:18:53 03/31/03 (0)
        • Re:that euro look - Randy M 20:11:32 03/31/03 (1)
          • Re: that euro look - Christian oak,ca 11:17:57 04/01/03 (0)
• testing HD's? - Peter Florance 05:37:02 03/31/03 (3)
  • Re: testing HD's? - Eric Q 18:56:31 03/31/03 (0)
  • Re: testing HD's? - KSB in VA 08:34:40 03/31/03 (0)
  • Re: testing HD's? - Ryan Bryan 07:46:44 03/31/03 (0)
• E34 seats will fit with minor (for me) mods - Jeff C 20:48:45 03/30/03 (1)
  • I will be eagerly awaiting updates/photos... - Tulsa Dave 07:12:15 03/31/03 (0)
• drivers door lock - Dan lafley 18:14:36 03/30/03 (0)
• earth to Tulsa Dave... - maria 16:50:24 03/30/03 (2)
  • See... I knew you could do it! - Tulsa Dave 07:10:55 03/31/03 (1)
    • Re: See... I knew you could do it! - maria 13:54:29 04/01/03 (0)
• Ported Bavaria Exhaust Manifolds F/S - Bill Bowes 11:25:46 03/30/03 (1)
  • Re: Ported Bavaria Exhaust Manifolds F/S - Nath in Tassie 19:34:14 03/30/03 (0)
• Fog lights - Canada Karl 09:55:47 03/30/03 (3)
  • Re: Fog lights - Kristopher Barrett 20:55:02 03/31/03 (0)
  • Re: Fog lights - Blair 11:49:38 03/30/03 (1)
    • that's how I mounted mine & love it eom - stewart 17:44:05 03/31/03 (0)
• End of the year models, my 76 - Matt C 09:08:19 03/30/03 (5)
  • Re: End of the year models, my 76 - Troy Rudolph 11:43:20 03/30/03 (1)
    • Re: End of the year models, my 76 - Matt C 14:01:51 03/30/03 (0)
  • I have had similar problems with my 78 - Sam Schutlz 09:32:44 03/30/03 (2)
    • Re: I have had similar problems with my 78 - Frank H 09:40:34 03/30/03 (1)
      • Re: I have had similar problems with my 75 - Blair 11:52:23 03/30/03 (0)
• Torque? - Matt C 06:46:00 03/30/03 (0)
• 5 speed questions - stewart 04:13:07 03/30/03 (3)
  • Re: 5 speed questions - Troy Rudolph 11:53:11 03/30/03 (0)
  • It's an OD. The extra casing's for the 5th gear. - Bill Bowes 11:17:10 03/30/03 (1)
    • Is the propshaft shorter on a 5-speed e12 ???? - Niklas Edlund (Sweden) 10:27:48 04/01/03 (0)
• There are more gregarious projects than just>>> - Lars Olbimmerguy 01:38:47 03/30/03 (6)
  • Re: There are more gregarious projects than just>>> - Frank H 09:36:36 03/30/03 (5)
    • I thought 'Hippies' were extinct ??? - Jefflee 11:41:19 03/30/03 (4)
      • Nope!... They're called "Granola's" now and are - Lars Olbimmerguy 12:59:21 03/30/03 (3)
        • Re: Nope!... They're called "Granola's" now and are - Canada Karl 15:55:48 03/30/03 (2)
          • Ask, and ye Shall...... Actually a bit PRE hippie. - Lars Olbimmerguy 19:02:49 03/30/03 (1)
            • Re: Ask, and ye Shall...... Actually a bit PRE hippie. - Canada Karl 20:15:58 03/30/03 (0)
• Free Adult Chat Room introduction agencies - Elena 22:10:38 03/29/03 (1)
  • complaint sent - please do not view spam post - spam slammer 11:06:28 03/30/03 (0)
• For sale - Corey R. 20:07:37 03/29/03 (2)
  • How many miles - trubey 16:53:53 03/30/03 (1)
    • Re: How many miles - Corey R. 18:47:45 03/30/03 (0)
• What's the fan in front of the radiator do? - Christian oak,ca 18:22:46 03/29/03 (3)
  • Re: What's the fan in front of the radiator do? - Mike W. 18:37:13 03/29/03 (2)
    • Thanks... - Christian oak,ca 09:51:27 03/30/03 (1)
      • Re: Thanks... - Mike W. 13:38:36 03/30/03 (0)
• speedometer probs - justin webster 14:37:24 03/29/03 (1)
  • Re: speedometer probs - Blair 16:51:09 03/29/03 (0)
• Re: e12 right tail light lens - Rick 13:17:40 03/29/03 (0)
• What to do with old seats - Tarazona (Tara Knowles in AZ) 21:29:18 03/28/03 (6)
  • True BMW Afficianados replace the>>>> - Lars Olbimmerguy 17:40:24 03/29/03 (4)
    • I was thinking of a backseat A-frame porch swing - rexmo 10:43:30 03/31/03 (0)
    • Old steering wheels - Jeff C 07:46:44 03/30/03 (0)
    • I love it! And I thought I was crazy! (NT) - Mike W. 18:41:26 03/29/03 (0)
    • THATS A GOOD IDEA! - justin webster 17:45:37 03/29/03 (0)
  • Re: What to do with old seats - Scott 17:28:34 03/29/03 (0)
• L-Jet ECU Mod Website - Kaveman 19:00:50 03/28/03 (1)
  • Nice site... - Tulsa Dave 19:20:17 03/28/03 (0)
• E12 Electric Sliding Roof (Sunroof) Question(s)... - Kaveman 18:58:41 03/28/03 (3)
  • A heads up to all about the sunroof - Jeff C 12:21:03 03/29/03 (1)
    • Re: A heads up to all about the sunroof - Kaveman 16:12:56 03/29/03 (0)
  • Yes, but - Mike W. 20:46:32 03/28/03 (0)
• buying an '80 528i, need some advise! - nick bush 18:14:57 03/28/03 (11)
  • Nice color combo, but beware of the R-Monster - Lars Olbimmerguy 13:21:40 03/29/03 (3)
    • I've been branded a Brit!! (+ more details) - nick bush 15:09:57 03/29/03 (2)
      • Gottcha!.. I knew you were US... Just punning ya>> - Lars Olbimmerguy 17:31:50 03/29/03 (1)
        • Re: Gottcha!.. I knew you were US... Just punning ya>> - nick bush 10:57:19 03/30/03 (0)
  • Costs are relative to the purchase price... - Tulsa Dave 19:19:21 03/28/03 (6)
    • Re: Costs are relative to the purchase price... - nick bush 12:06:55 03/29/03 (5)
      • the new guy makes a discovery... - nick bush 12:35:24 03/29/03 (4)
        • sounds like my old car (picture) - Adam Wilson 18:18:02 03/29/03 (3)
          • Re: sounds like my old car (picture) - nick bush 10:49:34 03/30/03 (0)
          • I knew that color combo sounded familiar... - Tulsa Dave 07:57:30 03/30/03 (0)
          • oops, I meant color, not rust! (nt) - Adam Wilson 18:18:35 03/29/03 (0)
• Shipping Charges - Frustrated 14:18:14 03/28/03 (8)
  • Re: Shipping Charges - Harold 09:04:31 03/30/03 (0)
  • I ship cameras internationally. Some not as small - Lars OIbimmerguy 15:37:52 03/28/03 (2)
    • They refuse to use USPS. They quoted with FED-EX - Derek 15:44:47 03/28/03 (1)
      • Might be because of no tracking on USPS - Lars Olbimmerguy 17:10:16 03/28/03 (0)
  • Re: Shipping Charges - Jamie Seattle 14:35:02 03/28/03 (3)
    • Re: Shipping Charges - Derek 14:46:04 03/28/03 (2)
      • Re: Shipping Charges - Jamie Seattle 15:49:16 03/28/03 (1)
        • Re: Shipping Charges - Derek 17:20:12 03/28/03 (0)
• ? Relay - Mike 12:44:36 03/28/03 (0)
• Plugs, vacuum, and miscellany - Brian in Abilene 09:48:36 03/28/03 (10)
  • Re: Plugs, vacuum, and miscellany - Troy Rudolph 11:27:39 03/28/03 (1)
    • Sounds like I have my weekend work cut out for me. - Brian in Abilene 11:49:48 03/28/03 (0)
  • Re: Plugs, vacuum, and miscellany - Peter Florance 11:02:44 03/28/03 (4)
    • Thanks, will do that. (more) - Brian in Abilene 11:06:19 03/28/03 (3)
      • no mine's cracked too - Peter Florance 12:19:58 03/28/03 (2)
        • Nah.... That's what duct tape is for.... - Tulsa Dave 17:49:03 03/28/03 (0)
        • That's what I thought. Thanks. (nt) - Brian in Abilene 12:55:05 03/28/03 (0)
  • Re: Plugs, vacuum, and miscellany - justin webster 10:28:21 03/28/03 (2)
    • Throttle Switches are OK, I'll check the timing - Brian in Abilene 10:36:05 03/28/03 (1)
      • Re: Throttle Switches are OK, I'll check the timing - justin webster 17:03:52 03/28/03 (0)
• Need More help on Torque Converter Bolts - Tom in MO 09:23:14 03/28/03 (7)
  • Re: Need More help on Torque Converter Bolts - Kristopher Barrett 21:34:09 03/31/03 (0)
  • Did you try a crowfoot socket on a breaker bar? - rexmo 11:11:21 03/31/03 (0)
  • Re: Need More help on Torque Converter Bolts - Jim Hineline 23:48:38 03/29/03 (0)
  • Re: Need More help on Torque Converter Bolts - Bob in San Jose 17:15:52 03/28/03 (0)
  • Re: Need More help on Torque Converter Bolts - Jeff C 10:52:28 03/28/03 (2)
    • Re: Need More help on Torque Converter Bolts - Tom in MO 11:08:43 03/28/03 (1)
      • Re: Need More help on Torque Converter Bolts - Tom 19:28:32 03/30/03 (0)
• 1977 530i for sale cheap - Jamie Seattle 08:59:34 03/28/03 (4)
  • Re: 1977 530i for sale cheap - Robert 09:36:15 03/28/03 (3)
    • Re: 1977 530i for sale cheap - Jamie Seattle 09:44:20 03/28/03 (2)
      • What Color? Any Rust? (NT) - Chris 10:37:11 03/28/03 (1)
        • Re: What Color? Any Rust? (NT) - Jamie Seattle 12:19:41 03/28/03 (0)
• idle drop - Jamie Seattle 07:59:16 03/28/03 (3)
  • Re: idle drop - Troy Rudolph 11:29:34 03/28/03 (2)
    • Re: idle drop - Karl in KS 13:43:23 03/29/03 (0)
    • Re: idle drop - Jamie Seattle 12:26:02 03/28/03 (0)
• M30 engine cam concerns - Canada Karl 06:37:11 03/28/03 (1)
  • Re: M30 engine cam concerns - Mike W. 20:56:38 03/28/03 (0)
• conversion - Tito 02:50:05 03/28/03 (4)
  • Re: conversion - Troy Rudolph 11:20:58 03/28/03 (2)
    • Ha! Now that's entertainment! (eom) - Tulsa Dave 16:17:21 03/28/03 (0)
    • I double-clicked! Eeek! (eom) - Troy Rudolph 11:22:21 03/28/03 (0)
  • Re: conversion - Troy Rudolph 11:20:56 03/28/03 (0)
• Matt C EGR Filter - Mike 21:14:14 03/27/03 (0)
• Anyone interested in a 87 3.5 engine or head? - Robert Duran 19:14:36 03/27/03 (1)
  • Where Located? (NT) - Chris 19:16:31 03/27/03 (0)
• red konis - stewart 18:47:23 03/27/03 (1)
  • Re: red konis - billy in SLO 11:38:19 03/28/03 (0)
• Head and/or Engine 3.5L - Lars Olbimmerguy 16:46:47 03/27/03 (0)
• BADGING ON FACTORY E-12 M535i PEAR SPOILER - BOB CLAY 11:44:34 03/27/03 (12)
  • I have some keyboards with lower case letters.... - Lars Olbimmerguy 18:48:41 03/28/03 (0)
  • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - james 10:33:59 03/28/03 (0)
  • for god's sakes man, stop shouting! (picture) - Adam Wilson 06:55:04 03/28/03 (0)
  • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - Al from Oz 15:56:52 03/27/03 (1)
    • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - BOB CLAY 18:55:37 03/27/03 (0)
  • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - Luke 15:21:56 03/27/03 (6)
    • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - BOB CLAY 18:47:19 03/27/03 (0)
    • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - Frank H 17:08:15 03/27/03 (4)
      • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - BOB CLAY 18:39:35 03/27/03 (0)
      • Re: BADGING ON FACTORY E-12 M535i PEAR SPOILER - Luke 17:29:07 03/27/03 (2)
        • Picture of badged 530 - Luke 17:33:24 03/27/03 (1)
          • Sorry, wrong link - Luke 10:10:34 03/28/03 (0)
• Where can I get the wheels on Wietse Wullink's 530 - Eric L. 11:17:52 03/27/03 (2)
  • Wietse's answer... - Wietse 11:27:49 03/27/03 (1)
    • Thanks! (nt) - Eric L. 11:38:05 03/27/03 (0)
• Gas Leak - Chris 10:13:43 03/27/03 (1)
  • Re: Gas Leak - Troy Rudolph 12:56:05 03/27/03 (0)
• Eibach? - Troy Rudolph 22:34:37 03/26/03 (10)
  • Re: Eibach? - Mike In Chicago 08:54:30 03/27/03 (0)
  • Re: Eibach? - Greg 07:42:34 03/27/03 (1)
    • Re: Eibach? - Frank H 09:11:49 03/27/03 (0)
  • Re: Eibach? - justin webster 00:03:21 03/27/03 (6)
    • Re: Eibach? - justin webster 00:09:24 03/27/03 (5)
      • I've got Racing Dynamics on my '80 w/KYBs... - Tulsa Dave 07:16:07 03/27/03 (2)
        • Re: I've got Racing Dynamics on my '80 w/KYBs... - justin webster 08:31:41 03/27/03 (1)
          • Fought hard for them on Ebay... - Tulsa Dave 12:21:08 03/27/03 (0)
      • I've got eibachs & HD bilstiens in back(more) - stewart 00:59:34 03/27/03 (1)
        • Re: I've got eibachs & HD bilstiens in back(more) - Troy Rudolph 08:34:47 03/27/03 (0)
• Head and Pistons corroded - Tito 21:59:03 03/26/03 (3)
  • Re: Head and Pistons corroded - Peter Florance 07:14:56 03/27/03 (2)
    • Re: Head and Pistons corroded - Tito 01:44:33 03/28/03 (1)
      • Re: Head and Pistons corroded - Tito 01:52:28 03/28/03 (0)
• grinding noise from clutch.........help! - Blair 21:48:52 03/26/03 (5)
  • Mine as well... - justin webster 23:58:25 03/26/03 (0)
  • Tranny - Mike W. 23:21:23 03/26/03 (1)
    • Ditto - Karl in KS 16:28:22 03/27/03 (0)
  • Re: grinding noise from clutch.........help! - Jim Hineline 22:05:48 03/26/03 (1)
    • Re: Thanks for the replies :) NT - Blair 01:46:13 03/27/03 (0)
• E12 For Sale, Vancouver Island, BC, Canada - Chris 18:36:54 03/26/03 (0)
• Drivers door - Dan Lafley 16:56:45 03/26/03 (5)
  • Re: Drivers door - greghill-phx,az 18:01:11 03/26/03 (2)
    • Re: Drivers door - Karl in KS 16:32:10 03/27/03 (0)
    • Re: Drivers door - Preston Frederickson 18:30:29 03/26/03 (0)
  • I guess the real question would be... - Tulsa Dave 17:59:35 03/26/03 (0)
  • no - ...tom 17:13:34 03/26/03 (0)
• Central lock unit 80 e12 - Alan V 12:15:39 03/26/03 (0)
• Potentially dumb question, related to timing - Bob/E12 based 6er 11:10:17 03/26/03 (5)
  • Absolutely! - Mike W. 20:44:32 03/26/03 (1)
    • I've done it...(nt) - Karl in KS 16:34:02 03/27/03 (0)
  • Re: Potentially dumb question, related to timing - Peter Florance 13:01:14 03/26/03 (2)
    • Re: Potentially dumb question, related to timing - Scott 16:56:33 03/26/03 (1)
      • Thanks guys!!! - bob/E12 based 6er 09:40:15 03/27/03 (0)
• Tranny bolts are all out. Now what? - Tom in MO 10:34:20 03/26/03 (9)
  • Re: Tranny bolts are all out. Now what? - Jim Hineline 14:12:17 03/26/03 (3)
    • My access plate has very restricted access.... - Tom in Mo 06:57:35 03/27/03 (2)
      • Re: My access plate has very restricted access.... - Jim Hineline 09:39:30 03/27/03 (1)
        • Cool. I will try that tonight. (NT) - Tom in Mo 11:14:01 03/27/03 (0)
  • If I recall... - Jeff C 13:46:10 03/26/03 (3)
    • Crack Car??????? - Tom in Mo 07:02:51 03/27/03 (2)
      • Re: Crack Car??????? - Jeff C 07:18:36 03/27/03 (1)
        • Re: Crack Car??????? - Tom in MO 11:13:09 03/27/03 (0)
  • Re: Tranny bolts are all out. Now what? - Kristopher Barrett 12:54:06 03/26/03 (0)
• Rebuilt Steering Boxes? - Kevin McD 08:47:02 03/26/03 (1)
  • those are great prices - Peter Florance 08:49:38 03/26/03 (0)
• Central Lock Unit - Dan Lafley 03:46:39 03/26/03 (0)
• Mounting Euro 6 series bumper/spoiler..... - Blair 00:46:23 03/26/03 (2)
  • Re: Mounting Euro 6 series bumper/spoiler..... - Randy M 06:49:33 03/27/03 (0)
  • Re: Mounting Euro 6 series bumper/spoiler..... - Brian in Mtl. 16:09:01 03/26/03 (0)
• Suggestions for the 77 530-I Water Pump - Jim Hartwell from Olympia, WA 21:17:30 03/25/03 (2)
  • GMB - Mike W. 00:25:27 03/26/03 (0)
  • Re: Suggestions for the 77 530-I Water Pump - Matt C 21:55:18 03/25/03 (0)
• Fuse keeps blowing for tach, fuel, temp... - Alex Lugo 20:59:19 03/25/03 (3)
  • Re: Fuse keeps blowing for tach, fuel, temp... - Jim Hineline 21:18:29 03/25/03 (2)
    • Re: Fuse keeps blowing for tach, fuel, temp... - Blair 01:07:23 03/26/03 (1)
      • Thanks.Looks lie I have some dismantling to do!eom - Alex Lugo 15:08:14 03/26/03 (0)
• Last and Final update....I hope..... - Scott 19:04:16 03/25/03 (4)
  • detonation problem?? - David B 01:41:43 03/26/03 (1)
    • Re: detonation problem?? - Scott 07:58:10 03/26/03 (0)
  • bottom line is .. - Peter Florance 19:13:57 03/25/03 (1)
    • Re: bottom line is .. - Scott 20:28:35 03/25/03 (0)
• update (post gutter incident) - andrew 15:27:19 03/25/03 (9)
  • A couple of comments for Andrew.... - Scott 20:38:29 03/25/03 (2)
    • See translation here! - Al from Oz 22:24:44 03/25/03 (1)
      • You Aussie's!!... A little OT...... - Scott 07:52:14 03/26/03 (0)
  • E12 rear suspension - Troy Rudolph 16:12:56 03/25/03 (5)
    • Re: E12 rear suspension - Matt C 17:05:45 03/25/03 (4)
      • I was lucky - Peter Florance 06:01:40 03/26/03 (1)
        • I "AM" lucky , , , just a bit 'o input , , , - Jefflee 19:56:58 03/26/03 (0)
      • Re: E12 rear suspension - Troy Rudolph 17:16:30 03/25/03 (1)
        • Re: E12 rear suspension - Matt C 17:54:34 03/25/03 (0)
• Drive's side door - Dan Lafley 15:19:26 03/25/03 (1)
  • Re: Drive's side door - Kristopher Barrett 12:44:36 03/26/03 (0)
• Loud Exhaust System - Eric M Hamilton 15:13:02 03/25/03 (2)
  • Re: Loud Exhaust System - will ollison 06:33:24 03/26/03 (0)
  • Re: Loud Exhaust System - Troy Rudolph 21:04:09 03/25/03 (0)
• think i may have a hot cam...not sure pls help - Andrew 15:09:33 03/25/03 (0)
• Hands free cell phone kit, dash mount help - Luke 14:55:56 03/25/03 (0)
• Oil Pan Gasket and Front Struts - Brad In Texas 12:42:38 03/25/03 (1)
  • Re: Oil Pan Gasket and Front Struts - Troy Rudolph 13:07:23 03/25/03 (0)
• Fuel injector problem - Chris Barnard. 11:27:59 03/25/03 (5)
  • Re: Fuel injector problem - KSB in VA 14:09:16 03/25/03 (3)
    • Re: Fuel injector problem - chris Barnard 13:23:58 03/29/03 (0)
    • Re: Fuel injector problem - Chris Barnard. 09:19:03 03/26/03 (1)
      • Re: Fuel injector problem - KSB inVA 10:50:28 03/26/03 (0)
  • Re: Fuel injector problem - Matt C 12:31:50 03/25/03 (0)
• A light at the end of the tunnel....I think.... - Scott 09:35:47 03/25/03 (4)
  • Re: A light at the end of the tunnel....I think.... - Matt C 14:45:39 03/25/03 (0)
  • Get as much $$ as you can and start over!!!! - TCD 12:42:31 03/25/03 (0)
  • Flywheel / Damper / Opinion - Troy Rudolph 11:13:57 03/25/03 (0)
  • Re: A light at the end of the tunnel....I think.... - Frank H 09:50:34 03/25/03 (0)
• 41 or 42 MM for cam nut. - Matt C 04:25:41 03/25/03 (1)
  • I have a MM cam nut for $30, Brand new. - TCD 06:58:59 03/25/03 (0)
• SEE BELOW!!! 3.5 conversion for SALE!!! - trubey 21:05:24 03/24/03 (0)
• Ready for e34/e332 motronic 3.5l - Trubey 21:04:13 03/24/03 (1)
  • laugh, nice comment about the headlights. (nt) - Adam Wilson 21:34:06 03/24/03 (0)
• Manual adjustment of L-jetronic - Peter Mooney 20:18:46 03/24/03 (6)
  • Re: Manual adjustment of L-jetronic - Peter Florance 20:21:44 03/24/03 (5)
    • Re: Manual adjustment of L-jetronic - Peter Mooney 20:41:30 03/24/03 (4)
      • Re: Manual adjustment of L-jetronic - Peter Florance 21:17:14 03/25/03 (3)
        • Re: Manual adjustment of L-jetronic - Peter Mooney 08:18:53 03/27/03 (2)
          • 528i conversion - Peter Florance 11:20:48 03/27/03 (1)
            • Have a look at this Site... - Kaveman 20:16:22 03/27/03 (0)
• been a long time... - Scott 17:35:01 03/24/03 (1)
  • Re: been a long time... - justin webster 19:26:48 03/24/03 (0)
• Service Manuals - Lou in Denver 17:26:50 03/24/03 (1)
  • Re: Service Manuals - Farhad 07:12:41 03/25/03 (0)
• 41 MM socket for the camshaft??? - Matt C 15:28:23 03/24/03 (5)
  • Tool Peddler, Portland, OR - doninportland 19:14:15 03/24/03 (2)
    • Re: Tool Peddler, Portland, OR - Matt C 12:39:24 03/25/03 (0)
    • They have a website. - doninportland 19:19:48 03/24/03 (0)
  • Re: 41 MM socket for the camshaft??? - Frank H 18:13:37 03/24/03 (0)
  • Technictool - Peter Florance 16:33:11 03/24/03 (0)
• Won't start with switch - Fer 11:23:40 03/24/03 (4)
  • Re: Won't start with switch - Eric M Hamilton 19:35:23 03/24/03 (0)
  • Re: Won't start with switch - Kristopher Barrett 11:59:23 03/24/03 (2)
    • Re: Won't start with switch - fer 13:44:39 03/24/03 (1)
      • yup. - ChuckNC 14:00:12 03/24/03 (0)
• birth certificate - oink from oz 10:12:03 03/24/03 (3)
  • How do you order one? - Troy Rudolph 13:09:43 03/25/03 (0)
  • Re: birth certificate - james 03:10:00 03/25/03 (1)
    • Re: birth certificate - james 03:12:21 03/25/03 (0)
• Seats - Tara in Arizona 09:22:58 03/24/03 (4)
  • I did that - Karl in KS 21:33:25 03/24/03 (0)
  • Re: Seats - Kaveman 10:27:07 03/24/03 (1)
    • Re: Seats - Tara Knowles 13:28:30 03/24/03 (0)
  • I think you will have to modify them a little... - Tulsa Dave 09:31:12 03/24/03 (0)
• Ok, Heres the scoop so far..... - Scott 08:56:36 03/24/03 (11)
  • What size engine - Mike W. 23:15:31 03/24/03 (0)
  • Your summary sounds logical. Bottom line... - Lars Olbimmerguy 21:19:36 03/24/03 (0)
  • No one has an Idea??? Help me out here... - Scott 17:12:19 03/24/03 (7)
    • no idea, just "shock and awe" that the crank nut - billy in SLO 17:33:05 03/24/03 (6)
      • Apology - billy in SLO 13:57:35 03/25/03 (1)
        • Apology Accepted... - Tulsa Dave 18:51:26 03/25/03 (0)
      • I swear, if I hear "shock and awe" again ill .... - justin webster 19:19:43 03/24/03 (3)
        • I thought they were saying "Shark and Owl" - BillW 09:37:03 03/25/03 (0)
        • That phrase has become "embedded" in newspeak. - Peter Mooney 20:24:51 03/24/03 (1)
          • Personally pretty disgusted with pet-names - Trubey 20:50:22 03/24/03 (0)
  • Re: Ok, Heres the scoop so far..... - Kaveman 10:23:19 03/24/03 (0)
• Instrument Cluster Fuse Help - Jim Hineline 08:26:37 03/24/03 (2)
  • Solved! - Jim Hineline 21:40:01 03/24/03 (0)
  • Re: Instrument Cluster Fuse Help - Jeff C 10:23:20 03/24/03 (0)
• Disabling Smog Devices - Todd 00:14:22 03/24/03 (0)
• Parts - Corey R. 22:59:35 03/23/03 (0)
• seeking valve lash spec - greghill 22:08:54 03/23/03 (0)
• Looking for a Lower Valence - Kaveman 22:06:59 03/23/03 (3)
  • Re: Looking for a Lower Valence - mark 00:00:46 03/24/03 (2)
    • Jeez that's a beautiful car, Mark (eom) - Remy Davison 08:45:35 03/24/03 (1)
      • Re: Jeez that's a beautiful car, Mark (eom) - mark 10:49:15 03/24/03 (0)
• brake change - james 22:04:56 03/23/03 (1)
  • Re: brake change - Peter Florance 05:56:38 03/24/03 (0)
• Ground straps - Brian in Abilene 21:35:03 03/23/03 (5)
  • Re: Ground straps - Karl in KS 21:42:28 03/24/03 (0)
  • Thanks guys, glad to know they're not a special - Brian in Abilene 07:31:29 03/24/03 (0)
  • Re: Ground straps - Mike W. 23:36:23 03/23/03 (0)
  • Re: Ground straps - greghill 22:16:53 03/23/03 (1)
    • Re: Ground straps - greghill 23:02:26 03/23/03 (0)
• Major progress today but.........some questions. - Matt C 17:18:03 03/23/03 (0)
• windows and winow seals - Blair 16:28:54 03/23/03 (0)
• first accident :( - Andrew 15:05:23 03/23/03 (7)
  • You're also not _meant_ to drive South African E12 - Remy Davison 08:41:38 03/24/03 (0)
  • Re: first accident :( - Matt C 18:25:35 03/23/03 (1)
    • it was oversteer changing to under that got me(nt) - Andrew 15:09:16 03/24/03 (0)
  • Re: first accident ...BAD!! - Al from Oz 15:28:46 03/23/03 (2)
    • Re: first accident ...BAD!! - Andrew 15:07:38 03/24/03 (1)
      • Re: first accident - Al from Oz 04:17:56 03/25/03 (0)
  • Re: first accident :( - Blair 15:13:54 03/23/03 (0)
• temp sensor at base of Rad????? - Blair 14:45:46 03/23/03 (7)
  • Re: temp sensor at base of Rad????? - Troy Rudolph 16:16:18 03/23/03 (2)
    • Re: regarding mixture.... - Blair 16:24:12 03/23/03 (1)
      • Re: regarding mixture.... - Troy Rudolph 16:32:48 03/23/03 (0)
  • Re: temp sensor at base of Rad????? - Robert Bondi 14:59:25 03/23/03 (3)
    • Re: temp sensor at base of Rad????? - Blair 15:09:05 03/23/03 (2)
      • diode - Peter Florance 17:45:04 03/23/03 (1)
        • diode location - Robert Bondi 18:18:57 03/23/03 (0)
• Window clip - Phil Mansfield 13:51:01 03/23/03 (0)
• Megasquirt Progress - running in Repo Car - Peter Florance 13:40:38 03/23/03 (2)
  • Re: Megasquirt Progress - running in Repo Car - Kaveman 20:22:12 03/23/03 (0)
  • Re: Megasquirt Progress - running in Repo Car - justin webster 13:47:44 03/23/03 (0)
• Speedometer gear question - Brian in Abilene 13:31:30 03/23/03 (4)
  • Re: Speedometer gear question - Jeff C 08:32:07 03/24/03 (0)
  • Re: Speedometer gear question - Klaus 20:59:25 03/23/03 (1)
    • Thanks! I've got the right one to put on then....(eom) - Brian in Abilene 21:23:50 03/23/03 (0)
  • Re: Speedometer gear question - Jake Hall 14:06:04 03/23/03 (0)
• My electrical troubles have been resolved...and... - justin webster 12:29:13 03/23/03 (3)
  • First-time valve adjustment - Brian in Abilene 13:29:42 03/23/03 (2)
    • Re: First-time valve adjustment - justin webster 13:44:23 03/23/03 (1)
      • Yup, you can do that, too, if you've got room. As - Brian in Abilene 21:26:36 03/23/03 (0)
• Quick engine question... - Matt C 09:09:32 03/23/03 (1)
  • Re: Quick engine question... - Tom M 09:44:15 03/23/03 (0)
• Cheap Air Filters - Troy Rudolph 23:14:21 03/22/03 (5)
  • Re: Cheap Air Filters - Klaus 23:21:07 03/23/03 (1)
    • Re: Cheap Air Filters - Troy Rudolph 09:14:17 03/25/03 (0)
  • Got one too. Made in Mexico. Better gas mileage - Jefflee 16:33:49 03/23/03 (2)
    • Re: Got one too. Made in Mexico. Better gas mileage - Troy Rudolph 16:38:22 03/23/03 (1)
      • Re: Got one too. Made in Mexico. Better gas milea - Walt Barie 11:43:25 03/25/03 (0)
• Let the mods begin......(long) - Matt C 20:26:18 03/22/03 (5)
  • AAV hose - ChuckNC 07:49:56 03/23/03 (3)
    • Re: AAV hose - Matt C 08:55:41 03/23/03 (2)
      • Re: AAV hose - Robert Bondi 13:43:27 03/23/03 (0)
      • 3 way is for AC cars - Peter Florance 10:37:32 03/23/03 (0)
  • Re: Let the mods begin......(long) - Jeff C 06:47:24 03/23/03 (0)
• 5 Fest 2003 tech session instructors needed - Robert Bondi 18:09:10 03/22/03 (6)
  • Come on guys... - Tulsa Dave 10:55:01 03/23/03 (1)
    • Re: Come on guys... - Robert Bondi 13:32:21 03/23/03 (0)
  • MegaSquirt - Peter Florance 07:09:33 03/23/03 (3)
    • Re: MegaSquirt - Robert Bondi 13:28:45 03/23/03 (2)
      • Ljet + Megasquirt - Peter Florance 13:38:52 03/23/03 (1)
        • That's what I meant. Got it. (nt) - Robert Bondi 13:45:01 03/23/03 (0)
• The Dance of the Temp. Needle - justin webster 12:08:43 03/22/03 (2)
  • Just for clarity.... On the battery - Lar Olbimmerguy 13:45:53 03/22/03 (0)
  • Try engine to body - Mike W. 13:32:43 03/22/03 (0)
• EGR Filter? - Mike 11:55:17 03/22/03 (2)
  • 530iA - Robert Bondi 23:52:22 03/22/03 (0)
  • Re: EGR Filter? - Matt C 20:15:03 03/22/03 (0)
• Tie Rod Assembly for sale - Jamie Anderson 11:16:36 03/22/03 (1)
  • Is it right or left? eom - stewart 17:00:47 03/22/03 (0)
• Re: Need Advice (She is OK) - Eric M Hamilton 01:47:20 03/22/03 (1)
  • Ground Wire - Klaus 09:46:52 03/22/03 (0)
• Free E12's at 2002 AD - G-Man 23:01:36 03/21/03 (0)
• GOT MY LICENCE YSETERDAY :) - Andrew 17:42:03 03/21/03 (0)
• Need Advice!!! - Eric M Hamilton 15:54:10 03/21/03 (8)
  • Re: Need Advice!!! - Randy 530i 12:45:40 03/24/03 (0)
  • Re: Need Advice!!! - Karl in KS 21:49:48 03/21/03 (0)
  • Re: Need Advice!!! - Peter Florance 16:23:28 03/21/03 (4)
    • Re: Need Advice!!! - Eric M Hamilton 16:52:46 03/21/03 (3)
      • Tach is the big dial next to the speedo - Peter Florance 16:56:18 03/21/03 (2)
        • Re: Tach is the big dial next to the speedo - Eric M Hamilton 17:24:42 03/21/03 (1)
          • Re: Tach is the big dial next to the speedo - Peter Florance 08:20:30 03/22/03 (0)
  • Re: Need Advice!!! - ChuckNC 16:12:52 03/21/03 (0)
• Pleaseeeeee help me with my head light problem! - Matt C 13:59:16 03/21/03 (10)
  • Re: Pleaseeeeee help me with my head light problem! - Kristopher Barrett 16:40:31 03/21/03 (1)
    • great idea on the Sharpie - Peter Florance 17:03:55 03/21/03 (0)
  • Re: Pleaseeeeee help me with my head light problem! - Troy Rudolph 14:11:10 03/21/03 (7)
    • Try replacing the low beam fuse for that side - BillW 15:51:32 03/21/03 (0)
    • first... - ChuckNC 14:27:23 03/21/03 (5)
      • What is AMHIK ??? (nt) - Erich 15:34:59 03/21/03 (4)
        • Ask Me How I Know (nt) - ChuckNC 15:48:21 03/21/03 (3)
          • Re: Ask Me How I Know (nt) - Matt C 22:01:42 03/21/03 (2)
            • Oh my god man..........Im a jackass! - Matt C 22:26:21 03/21/03 (1)
              • no worries - ChuckNC 07:18:02 03/22/03 (0)
• Hood Insulation - Chris Hollis, Huntsville, AL 13:55:20 03/21/03 (2)
  • Re: Hood Insulation-An option - Brian in Mtl. 15:56:16 03/21/03 (1)
    • I just bought some and have leftovers - billy in SLO 16:56:52 03/21/03 (0)
• parting out my 77 - Random 12:49:56 03/21/03 (0)
• Blower motor help - Brian in Abilene 10:47:18 03/21/03 (3)
  • Re: Blower motor help - Paul O. 18:31:13 03/21/03 (0)
  • Re: Blower motor help - Troy Rudolph 13:35:49 03/21/03 (1)
    • Thanks! Good article...back to the junkyard - Brian in Abilene 14:22:15 03/21/03 (0)
• Frozen Door - Door won't open 09:50:41 03/21/03 (9)
  • if door won't unlock - Peter Florance 16:19:35 03/21/03 (0)
  • Re: Frozen Door - Tom in MO 14:47:23 03/21/03 (1)
    • inside the door - Karl in KS 21:57:51 03/21/03 (0)
  • remove door panel and open it from inside the door - ...tom 10:43:08 03/21/03 (3)
    • Re: remove door panel and open it from inside the door - Alex Lugo 11:04:44 03/21/03 (2)
      • hmmm, it's hard t remember... - ...tom 13:18:40 03/21/03 (1)
        • Thanks all! nt - Alex Lugo 13:23:56 03/21/03 (0)
  • Re: Frozen Door - Scott 09:59:03 03/21/03 (1)
    • Re: Frozen Door - Alex Lugo 10:08:09 03/21/03 (0)
• Intake - Russel Huff 02:25:32 03/21/03 (3)
  • Re: Intake - Andrew 02:47:59 03/21/03 (2)
    • Re: Intake - Russel Huff 11:38:48 03/21/03 (1)
      • jet hot - Troy Rudolph 13:33:04 03/21/03 (0)
• Just got home, car Blew up, tired, unhappy..... - Scott 01:55:24 03/21/03 (12)
  • Re: Just got home, car Blew up, tired, unhappy..... - Robert Bondi 00:21:10 03/22/03 (1)
    • Ssshhhhhhh , , ,Lee's racer is there . . . - Jefflee 16:47:26 03/23/03 (0)
  • I've seen a few - Mike W. 00:19:41 03/22/03 (0)
  • dude, total bummer - mikey 22:25:31 03/21/03 (1)
    • a front bearing cap? - mikey 22:29:05 03/21/03 (0)
  • only seen that once.. - Matt C 13:55:48 03/21/03 (0)
  • DING DING DING..round one..... - Scott 09:57:15 03/21/03 (0)
  • Re: Just got home, car Blew up, tired, unhappy..... - Kaveman 09:47:39 03/21/03 (1)
    • Re: Just got home, car Blew up, tired, unhappy..... - Bill Bowes 10:01:09 03/22/03 (0)
  • terrible story - Adam Wilson 06:34:34 03/21/03 (1)
    • Here here...go get 'em (windy) - Dave D 21:18:33 03/21/03 (0)
  • Sorry! - TCD 05:47:36 03/21/03 (0)
• Megasquirt Progress - Peter Florance 22:49:46 03/20/03 (2)
  • No prob, more than happy to help... - Scott 09:51:24 03/21/03 (0)
  • Re: Megasquirt Progress - Troy Rudolph 23:02:25 03/20/03 (0)
• All the parts you need @ a fair price! - Eric M Hamilton 20:47:12 03/20/03 (1)
  • UPS? - Mike W. 20:52:05 03/20/03 (0)
• FAT '75 3.2l turbo NOT SOLD at $4999. on Ebay.de - trubey 18:21:20 03/20/03 (0)
• NICE black E12 seen in Greensboro, NC... - Jeff Olson 17:14:36 03/20/03 (0)
• 1979 BMW 528i (ARE THESE PARTS STANDARD) - Eric M Hamilton 15:58:26 03/20/03 (6)
  • Re: 1979 BMW 528i (ARE THESE PARTS STANDARD) - Frank H 10:19:14 03/21/03 (0)
  • Re: 1979 BMW 528i (ARE THESE PARTS STANDARD) - ChuckNC 16:42:51 03/20/03 (4)
    • Re: 1979 BMW 528i (ARE THESE PARTS STANDARD) - Remy Davison 08:08:15 03/21/03 (0)
    • Re: 1979 BMW 528i (ARE THESE PARTS STANDARD) - Eric M Hamilton 18:40:29 03/20/03 (2)
      • I sense some confusion... - Tulsa Dave 10:22:33 03/21/03 (0)
      • Central Lock system - Peter Florance 19:36:12 03/20/03 (0)
• 1979 BMW 528i (ARE THESE PARTS STANDARD) - Eric M Hamilton 15:58:25 03/20/03 (0)
• Quick Question for tech guys - Eric M Hamilton 12:48:48 03/20/03 (11)
  • Re: Quick Question for tech guys - Kaveman 18:18:27 03/20/03 (3)
    • Re: Quick Question for tech guys - Eric M Hamilton 18:47:36 03/20/03 (2)
      • Re: Quick Question for tech guys - Kaveman 19:26:36 03/20/03 (1)
        • Annoying whirr... - Lenny D. 01:37:44 03/21/03 (0)
  • Re: Quick Question for tech guys - Blair 14:34:28 03/20/03 (4)
    • Re: Quick Question for tech guys - Eric M Hamilton 15:53:04 03/20/03 (0)
    • is the fuel pump,Could replace it, but lots of $$ - Andrew 14:48:21 03/20/03 (2)
      • Re: is the fuel pump,Could replace it, but lots of $$ - Eric M Hamilton 15:56:03 03/20/03 (1)
        • R28 Skyline is a Nissan (more) - Remy Davison 08:06:53 03/21/03 (0)
  • Please Identify The Car - Troy Rudolph (Webmaster) 13:30:47 03/20/03 (1)
    • Re: Please Identify The Car - Eric M Hamilton 13:54:14 03/20/03 (0)
• There is a God...Passed California Smog - Todd 630CSI 12:46:55 03/20/03 (0)
• Newly bought 1979 528i - Eric M Hamilton 12:45:33 03/20/03 (0)
• electrical problem,headlamp,low beam. - Matt C 11:41:16 03/20/03 (1)
  • Re: electrical problem,headlamp,low beam. - Matt C 11:57:21 03/20/03 (0)
• Tool Request... - Tulsa Dave 10:30:35 03/20/03 (3)
  • Re: Tool Request... - Phil M 01:36:30 03/21/03 (1)
    • A clarification... - Tulsa Dave 10:43:53 03/21/03 (0)
  • Re: Tool Request... - Kaveman 19:29:29 03/20/03 (0)
• Pics of my head - Matt C 08:36:50 03/20/03 (3)
  • Re: Pics of my head - Matt C 08:38:03 03/20/03 (2)
    • Holy crap, are you sure they didnt play - Scott 08:58:24 03/20/03 (1)
      • Porn is cheaper than shiny aluminum anyday - JR --- 1978 635CSi 09:48:31 03/20/03 (0)
• painting pictures - ChuckNC 07:27:54 03/20/03 (1)
  • Re: painting pictures - justin webster 07:34:04 03/20/03 (0)
• e12 m535i steering wheel ebay.de - james 04:33:35 03/20/03 (10)
  • Only ships to Germany - Al from Oz 15:11:30 03/20/03 (0)
  • Appears as if leather is missing - Luke 07:49:16 03/20/03 (8)
    • I think the wheel looks good in the photo - Adam Wilson 10:29:16 03/20/03 (6)
      • Re: I think the wheel looks good in the photo - Mike In Chicago 11:29:25 03/20/03 (3)
        • Re: I think the wheel looks good in the photo - justin webster 11:48:41 03/20/03 (2)
          • Re: I think the wheel looks good in the photo - Mike In Chicago 12:15:18 03/20/03 (1)
            • Re: I think the wheel looks good in the photo - justin webster 13:20:19 03/20/03 (0)
      • Clear turn signals, yellow headlights,... - Tulsa Dave 10:32:05 03/20/03 (1)
        • Re: Clear turn signals, yellow headlights,... - Adam Wilson 15:41:28 03/20/03 (0)
    • Re: Appears as if leather is missing - Scott 09:03:07 03/20/03 (0)
• paging Trubey - Fred 21:21:21 03/19/03 (0)
• Rubber shift boot - T.Han 20:32:20 03/19/03 (6)
  • Re: Rubber shift boot - Alan V 09:11:27 03/20/03 (5)
    • Re: Rubber shift boot - Mike In Chicago 09:31:55 03/20/03 (4)
      • Re: leather shift boot - Blair 11:03:39 03/20/03 (3)
        • Re: leather shift boot - Mike In Chicago 11:23:20 03/20/03 (2)
          • Re: leather shift boot - Blair 14:38:41 03/20/03 (1)
            • Re: leather shift boot - Mike In Chicago 10:53:18 03/21/03 (0)
• FS: 4 Flat Chrome Hub Caps... Sorry No Rings - Kaveman 20:11:44 03/19/03 (0)
• Auto Tranny Question(s) - Kaveman 20:07:20 03/19/03 (2)
  • Re: Auto Tranny Question(s) - Remy Davison 08:34:08 03/20/03 (1)
    • Nope - Mike W. 21:02:12 03/20/03 (0)
• Hey, some of ya'll may want this... - Scott 19:45:11 03/19/03 (1)
  • oops..Here it is....sorry - Scott 19:46:14 03/19/03 (0)
• 83 head and endless transmissions(long) - Tom in Mo 15:17:51 03/19/03 (0)
• signals question - Art 15:00:24 03/19/03 (8)
  • hazard switch - Peter Florance 15:12:52 03/19/03 (7)
    • Re: hazard switch - T.Han 22:10:45 03/19/03 (0)
    • Plus two related questions. Re: hazard switch - Mike In Chicago 16:26:19 03/19/03 (5)
      • Re: Plus two related questions. Re: hazard switch - Peter Florance 17:00:53 03/19/03 (4)
        • Re: Plus two related questions. Re: hazard switch - Mike In Chicago 09:37:20 03/20/03 (2)
          • 3 on ebay (more) - Peter Florance 12:14:26 03/20/03 (1)
            • Re: 3 on ebay (more) Thanks! Bid pending (NT) - Mike In Chicago 12:19:27 03/20/03 (0)
        • Re: Plus two related questions. Re: hazard switch - Lenny D. 00:36:47 03/20/03 (0)
• Euro bumpers... - Fer 14:55:40 03/19/03 (1)
  • Re: Euro bumpers... - Blair 20:27:12 03/19/03 (0)
• OCAP Lower control Arms - Kaveman 14:30:29 03/19/03 (0)
• PAGING: Raphael Derkson - Mishast 13:52:45 03/19/03 (2)
  • Re: PAGING: Raphael Derkson - Don Daynes 23:32:47 03/19/03 (1)
    • Thanks: I was duped by Photoshop. - Misha 11:53:58 03/20/03 (0)
• Its finally here!...........Its freaking damaged!! - Matt C 13:24:28 03/19/03 (5)
  • Don't get me started on UPS! nt - Robert Bondi 07:51:38 03/20/03 (0)
  • Re: Its finally here!...........Its freaking damaged!! - Don Daynes 20:57:11 03/19/03 (3)
    • YIPE! that actually hurt me reading those (nt) - justin webster 21:52:08 03/19/03 (2)
      • LOL, Justin, If we keep doing this... - Scott 22:37:08 03/19/03 (1)
        • True, maybe we should hold off for a bit?(nt) - justin webster 07:29:25 03/20/03 (0)
• 3.5 UPDATE Not all good... - billy in SLO 11:27:08 03/19/03 (5)
  • Re: 3.5 UPDATE Not all good... - Kaveman 13:40:08 03/19/03 (3)
    • Reply to Sean and PC - billy in SLO 14:03:19 03/19/03 (2)
      • Re: Reply to Sean and PC - Kaveman 14:17:14 03/19/03 (0)
      • sorry, meant PF (nt) - billy 14:04:19 03/19/03 (0)
  • sealing washer - Peter Florance 11:29:36 03/19/03 (0)
• Where can I find an analog clock for '81 528i? - Allen 10:33:32 03/19/03 (4)
  • Re: Where can I find an analog clock for '81 528i? - Eric M Hamilton 15:32:00 03/21/03 (0)
  • Re: Where can I find an analog clock for '81 528i? - Frank H 11:07:09 03/19/03 (2)
    • Re: Where can I find an analog clock for '81 528i? - Lee Cornett 09:55:43 03/21/03 (0)
    • Re: Where can I find an analog clock for '81 528i? - Eric M Hamilton 18:49:44 03/20/03 (0)
• WTB main pulley - Josh C. 08:15:23 03/19/03 (0)
• High-Flow intake pipe - Dan Lafley 01:54:32 03/19/03 (1)
  • Re: High-Flow intake pipe - Troy Rudolph 16:44:54 03/19/03 (0)
• Were can I find 1979 528i Fr/Ba Euro bumpers - Eric M Hamilton 01:54:19 03/19/03 (4)
  • For bumpers - Jeff C 09:23:26 03/19/03 (2)
    • walloth & nesch? - Troy Rudolph 11:22:48 03/19/03 (0)
    • Curious about the shipping... - Tulsa Dave 10:21:49 03/19/03 (0)
  • Re: Were can I find 1979 528i Fr/Ba Euro bumpers - Peter Florance 05:18:10 03/19/03 (0)
• Wow!!! - Don Daynes 00:42:36 03/19/03 (3)
  • true innovator and artist!!!! - BIGERIK 21:44:21 03/19/03 (0)
  • Re: Wow!!! - Kaveman 09:06:14 03/19/03 (0)
  • Congrats Don..I'll say it again..... - Scott 08:21:43 03/19/03 (0)
• What's the stock weight for a '79 528i? - Valerie Bowman 23:00:51 03/18/03 (3)
  • Owner's manual says 3320 lbs. (eom) - Troy Rudolph 08:56:46 03/19/03 (2)
    • Is there a huge difference between 79 and 81? - Scott 09:05:15 03/20/03 (1)
      • The way it is measured - Mike W. 20:49:04 03/20/03 (0)
• 5 spd Question, Clarification really.... - Scott 20:29:27 03/18/03 (6)
  • Re: 5 spd Question, Clarification really.... - mark 20:59:31 03/18/03 (0)
  • Re: 5 spd Question, Clarification really.... - Wietse in very snowy Fort Collins 20:58:19 03/18/03 (4)
    • Don't forget the 733-735 - Eric Q 23:57:38 03/18/03 (1)
      • Also 81-82 633 (NT) - Mike W. 00:22:55 03/19/03 (0)
    • Re: 5 spd Question, Clarification really.... - Canada Karl 22:57:49 03/18/03 (0)
    • Thanks for the Info Guys...nt - Scott 21:12:46 03/18/03 (0)
• Wheel caps - Nath in Tassie 19:30:55 03/18/03 (3)
  • Re: Wheel caps - Randy 76/530 21:34:55 03/18/03 (0)
  • Re: Wheel caps - Lou in Denver 21:22:41 03/18/03 (1)
    • Thanks Lou - Nath in Tassie 21:29:10 03/18/03 (0)
• Parts locater....New parts - Lars Olbimmerguy 18:45:03 03/18/03 (1)
  • The vacuum diaphragm.... - justin webster 19:40:56 03/18/03 (0)
• Veneer source - Kristopher Barrett 18:04:58 03/18/03 (0)
• Coil Needed - Brian in Abilene 17:57:06 03/18/03 (2)
  • Re: Coil Needed - Troy Rudolph 22:16:26 03/18/03 (1)
    • Thanks! (eom) - Brian in Abilene 07:55:48 03/19/03 (0)
• Who's Black 12er on Home Page? - Misha 17:45:18 03/18/03 (1)
  • February 2003 COTM - Raphael Derkson (eom) - Troy Rudolph 22:14:53 03/18/03 (0)
• Buy me please; 1976 530i - Chad Z 17:26:54 03/18/03 (0)
• What 3.5 blocks are you using ? - Niklas Edlund 12:19:06 03/18/03 (2)
  • Go Here - Mr. Coffey 12:51:02 03/18/03 (1)
    • Hey Thanx ... I must be blind :-) - Niklas Edlund (Sweden) 10:35:00 03/19/03 (0)
• chrome wheel trim rings - mike 11:58:25 03/18/03 (2)
  • Yep..... - Lars Olbimmerguy 13:13:05 03/18/03 (1)
    • Also have couple sets steel wheels. OREGON - Lars Olbimmerguy 13:16:08 03/18/03 (0)
• A foot of snow - Lou in Denver 09:19:35 03/18/03 (1)
  • Re: A foot of snow - Paul O 15:21:01 03/18/03 (0)
• E12 & E28 shocks the same? - Remy Davison 01:01:24 03/18/03 (1)
  • Re: E12 & E28 shocks the same? - Blair 13:54:31 03/18/03 (0)
• e12 sighted FLYING near Palm Springs, CA (more) - Jim Davis 19:59:28 03/17/03 (3)
  • Speaking of sightings. Colorado car? - Nick, CO 21:29:35 03/17/03 (2)
    • How is Wrights? - koop 18:08:06 03/18/03 (0)
    • Sighting: Sea to Sky Highway, Vancouver-Whistler - Chris 10:00:53 03/18/03 (0)
• Power Antenna Tuner Cable... - Kaveman 19:53:34 03/17/03 (2)
  • Got an Answer... - Kaveman 12:04:30 03/18/03 (1)
    • Re: Got an Answer... - Alex Lugo 15:48:13 03/18/03 (0)
• help with flooding during starting. - rich 19:21:20 03/17/03 (4)
  • Re: help with flooding during starting. - gunnar anstad 14:55:04 03/19/03 (1)
    • Re: help with flooding during starting. - rick 21:11:23 03/19/03 (0)
  • Fuel pressure regulator - Mike W. 21:13:56 03/17/03 (1)
    • Re: Fuel pressure regulator - rick 21:38:54 03/17/03 (0)
• Left hand side brakes binding E12 528i - Roger Merritt 16:33:28 03/17/03 (12)
  • Re: Left hand side ?? - Karl in KS 16:40:41 03/18/03 (0)
  • Re: Left hand side brakes binding E12 528i - Roger Merritt 16:38:42 03/17/03 (10)
    • check your email - Peter Florance 21:52:03 03/17/03 (0)
    • Re: Left hand side brakes binding E12 528i - Mike W. 21:37:44 03/17/03 (2)
      • good call - Peter Florance 05:38:41 03/18/03 (1)
        • Re: good call - Roger Merritt 15:50:19 03/18/03 (0)
    • Re: Left hand side brakes binding E12 528i - mikey 19:20:28 03/17/03 (5)
      • Where did you buy them....(more) - justin webster 22:40:06 03/17/03 (3)
        • Pelican Parts have them at $83, no core, more - Remy Davison 08:02:57 03/18/03 (0)
        • Re: Where did you buy them....(more) - mikey 00:18:15 03/18/03 (1)
          • oh yea, - mikey 00:20:05 03/18/03 (0)
      • Re: Left hand side brakes binding E12 528i - Roger Merritt 22:00:13 03/17/03 (0)
• okay NE folks, save this car! - ...tom 15:42:43 03/17/03 (0)
• Create A Chat Room chat profiles - Kristy 14:40:07 03/17/03 (6)
  • My favorite part of that... - justin webster 21:25:34 03/17/03 (4)
    • Please review the posting policy. - Troy Rudolph (Webmaster) 22:50:28 03/17/03 (3)
      • Re: Please review the posting policy. - justin webster 07:38:18 03/18/03 (2)
        • Re: Please review the posting policy. - Troy Rudolph 08:08:06 03/18/03 (1)
          • Re: Please review the posting policy. - justin webster 19:33:19 03/18/03 (0)
  • complaint sent to ISP nt - spam slammer 16:12:08 03/17/03 (0)
• Buttons - Luke Walker 13:52:14 03/17/03 (1)
  • orange is foglights, black is a fake - ...tom 14:39:19 03/17/03 (0)
• Ocassional Stall - Brian in Abilene 12:55:29 03/17/03 (9)
  • Re: Ocassional Stall - Kristopher Barrett 13:05:00 03/17/03 (8)
    • Points??? - Brian in Abilene 13:07:29 03/17/03 (7)
      • Gack.... - Kristopher Barrett 16:48:51 03/18/03 (0)
      • Re: Points??? - Troy Rudolph 14:02:15 03/17/03 (3)
        • Well, that might be the problem - Brian in Abilene 14:34:51 03/17/03 (2)
          • '79-'81 Coils Are Identical (eom) - Troy Rudolph 14:38:12 03/17/03 (1)
            • Thanks! (EOM) - Brian in Abilene 14:53:26 03/17/03 (0)
      • Re: Points??? - Peter Florance 13:42:00 03/17/03 (1)
        • Re: Points??? - mikey 19:31:44 03/17/03 (0)
• Story behind Billy's New Toy - John in Simi Valley, '81 528i, '84 SHARK 12:00:43 03/17/03 (4)
  • Things that should never happen, but >>> - Lars OBG 12:08:50 03/17/03 (1)
    • tanks - Kristopher Barrett 12:52:46 03/17/03 (0)
  • Glad your sons ok, these things are tanks!! - Scott 12:08:28 03/17/03 (1)
    • You better believe it - Mike W. 21:26:25 03/17/03 (0)
• Part - Lou in denver 09:49:34 03/17/03 (2)
  • Re: Part - Nick, CO 17:37:15 03/17/03 (1)
    • Re: Part - Lou in Denver 18:19:49 03/17/03 (0)
• HAPPY SAINT PATRICKS DAY! - justin webster 08:40:01 03/17/03 (2)
  • LMAOROF!! Number 12 is the baddest!! - Scott 12:05:29 03/17/03 (1)
    • Re: LMAOROF!! Number 12 is the baddest!! - justin webster 19:48:05 03/17/03 (0)
• wheel paint - Matt 07:25:57 03/17/03 (4)
  • Re: wheel paint - will ollison 08:56:01 03/17/03 (0)
  • Re: wheel paint - ChuckNC 08:50:39 03/17/03 (2)
    • Re: wheel paint - justin webster 08:53:27 03/17/03 (1)
      • Re: wheel paint - T.Han 07:52:54 03/18/03 (0)
• Tonights progress - Jeff C 00:20:52 03/17/03 (3)
  • Outputting the print - Jeff C 10:36:50 03/17/03 (0)
  • Re: Tonights progress - justin webster 08:55:19 03/17/03 (0)
  • do you do this for a living? - ChuckNC 08:52:17 03/17/03 (0)
• the 3.5, and the 2.8... - justin webster 23:59:57 03/16/03 (3)
  • e28 3.5L on euro 81 e12 - 7.2 seconds - Peter Florance 06:13:58 03/17/03 (2)
    • Re: e28 3.5L on euro 81 e12 - 7.2 seconds - justin webster 08:19:28 03/17/03 (1)
      • Manual windows - Kristopher Barrett 13:02:26 03/17/03 (0)
• Hazard light switch - Nath in Tassie 23:02:14 03/16/03 (4)
  • Go with Karls description - Cristian In Sydney 16:24:23 03/17/03 (1)
    • Re: Go with Karls description - Nath in Tassie 18:15:07 03/17/03 (0)
  • Re: Hazard light switch - Karl in KS 23:12:59 03/16/03 (1)
    • Thanks Karl - Nath in Tassie 23:16:28 03/16/03 (0)
• Way...way..WAY OT, but I have a few questions... - Scott 21:54:19 03/16/03 (3)
  • Re: Way...way..WAY OT, but I have a few questions... - Kristopher Barrett 12:42:31 03/17/03 (0)
  • Re: Way...way..WAY OT, but I have a few questions... - Jeff C 00:04:28 03/17/03 (0)
  • No personal dealings, but - Mike W. 23:15:36 03/16/03 (0)
• Hood? Hood? Hood? - John in Simi Valley 21:05:14 03/16/03 (2)
  • you and your bud should... - ChuckNC 22:39:12 03/16/03 (0)
  • Re: Hood? Hood? Hood? - Bernie Aguilar 21:20:39 03/16/03 (0)
• Cylinder head FAQ updated with pictures - Peter Florance 20:03:41 03/16/03 (0)
• wheel "freshen up" - Matt 19:50:40 03/16/03 (1)
  • Bushings are cheap and easy - Jeff C 00:08:31 03/17/03 (0)
• Turned my mates into BMW lovers! - Nath in Tassie 18:40:40 03/16/03 (2)
  • Similar problem w/ my brother and my girl friend.. - Lars Olbimmerguy 19:08:52 03/18/03 (0)
  • Re: Turned my mates into BMW lovers! - Remy Davison 07:18:39 03/17/03 (0)
• help wit spring ID - ...tom 18:10:44 03/16/03 (0)
• OT/OT... On topic/Off topic.... - Lars Olbimmerguy 17:40:40 03/16/03 (7)
  • Drip Rail tool - Karl in KS 22:49:07 03/16/03 (2)
    • That's what the DR tool looks like, only wider so - Lars OBG 23:49:15 03/16/03 (1)
      • right - Karl in KS 16:47:58 03/18/03 (0)
  • Italian cars - Al from Oz 22:27:19 03/16/03 (0)
  • 2 o'clock - Chuck NC 18:38:16 03/16/03 (2)
    • You were in the "Sweet Spot" Every car>> - Lars Olbimmerguy 21:13:47 03/16/03 (1)
      • I thought it was Tuesday and Thursday Cars?? - Scott 22:15:08 03/16/03 (0)
• Delaware E12 microfest - Peter Florance 15:32:07 03/16/03 (3)
  • thanks for stopping bye! nice euro e12 too... - ...tom 18:05:17 03/16/03 (2)
    • Whereabouts in Delaware? - Chris 20:13:22 03/16/03 (1)
      • wilmington (eom) - ...tom 06:09:56 03/17/03 (0)
• One Worth Saving? (From Craigslist.org) - Jerry Curry 13:56:36 03/16/03 (0)
• Saw an e12 in a movie last night - Ryan Bryan 08:01:13 03/16/03 (2)
  • You're name can't really be ryan bryan.. can it - you parents are cruel 04:52:44 03/17/03 (1)
    • yea....but my Dad is bigger than yours. - Ryan Bryan 06:51:12 03/17/03 (0)
• Hey Lee Cornett....check yo email please....... - BNC 23:33:37 03/15/03 (0)
• Who Doesnt have a Stock Motor? - Dan Lafley 22:21:21 03/15/03 (27)
  • stock rebuilt (luv it) - Art 17:14:15 03/19/03 (0)
  • Re: Who Doesnt have a Stock Motor? - rick 19:08:14 03/17/03 (0)
  • 81 528i w/ 85 3.5, 320 runners - Peter Claassen 10:33:29 03/17/03 (0)
  • '83 528i Euro/South African motor, but _zero_ - Remy Davison 07:54:26 03/17/03 (0)
  • 75 528 w/ Solex 4A1 4-choke 2-stage Carb 3.3l (nt) - ckn 05:03:38 03/17/03 (0)
  • 77 530 w/ euro 3.5 & 79 528i stock - stewart 00:44:48 03/17/03 (0)
  • 85 3.5,L-jet,320 runners, Bav man.,cold air intake - billy in SLO 23:31:54 03/16/03 (0)
  • '89 535i engine - Karl in KS 22:53:25 03/16/03 (0)
  • Re: Who Doesnt have a Stock Motor? - Lee Cornett 19:07:56 03/16/03 (0)
  • Built 3.5L more inside... - Wietse in Fort Fun CO 17:03:09 03/16/03 (1)
    • big six - Peter Florance 19:22:49 03/16/03 (0)
  • '77 528i w/euro 3.5 ltr L-jet + 0.60 OS bore (nt) - Cristian in Sydney - Oz 16:11:00 03/16/03 (0)
  • Re: Who Doesnt have a Stock Motor? - Jamie Seattle 16:08:20 03/16/03 (0)
  • US e28 3.5L - Peter Florance 15:35:28 03/16/03 (0)
  • '80 528i w/3.3L - '81 528i stock, but not for long - Tulsa Dave 14:49:26 03/16/03 (0)
  • Re: 75 530i, 3.5+5spd, goes like a bat out of hell - Blair 14:17:17 03/16/03 (0)
  • 79 528i, 87 3.5euro,motronic, bored pistons cam nt - Jim 13:29:55 03/16/03 (0)
  • '79 w/3.5 L-Jet, 5 speed OD, 3.64LSD...(nt) - Kaveman 10:02:33 03/16/03 (0)
  • '81 e12 w/ euro 3.5 L-jet OD 5-spd, 3.07 LSD - ...tom 06:01:42 03/16/03 (0)
  • 79 with 86 motronic 3.5L w/ perf. chip. 200 + HP - mikey 01:01:35 03/16/03 (0)
  • '80 528i w/Euro 3.5 liter L-Jet - 218HP + mods(nt) - Jim Davis 00:36:04 03/16/03 (0)
  • '79 528i w/ '89 535i Motonic 209HP (eom) - Troy Rudolph 23:53:34 03/15/03 (0)
  • ooh ooh mista cahta mista cahta!!! - Scott 22:51:53 03/15/03 (4)
    • YOu have a carb... - Dan Lafley 23:32:45 03/15/03 (3)
      • No way, triple webers is where its at... - Scott 11:44:35 03/16/03 (2)
        • carbs are cool - Peter Florance 20:08:53 03/17/03 (0)
        • Agreed!! - Misha 17:53:15 03/17/03 (0)
• 3.5 swap update...IT RUNS!!!! - billy in SLO 21:15:39 03/15/03 (3)
  • Tell us what it feels like to drive ! - Peter Claassen 10:35:34 03/17/03 (0)
  • Re: 3.5 swap update...IT RUNS!!!! - Kaveman 11:14:21 03/16/03 (0)
  • Congrats Billy.... - Scott 22:53:12 03/15/03 (0)
• Electrical Problem for 1980 528i - Luis Nido 20:52:18 03/15/03 (4)
  • Common problem - Mike W. 21:29:20 03/15/03 (3)
    • Re: Common problem - Luis Nido 21:39:23 03/15/03 (2)
      • Re: Common problem - Phil 22:17:22 03/15/03 (1)
        • Re: Common problem - Luis Nido 15:41:29 03/16/03 (0)
• Widow chrome/LarsOBG - T.Han 19:16:48 03/15/03 (2)
  • I have one of the tools in my stuff. I am going to - Lars OBG 21:07:16 03/15/03 (1)
    • Re: I have one of the tools in my stuff. I am goin - T.Han 23:16:50 03/15/03 (0)
• Ok boys, We need to step up to the plate.... - Scott 18:02:33 03/15/03 (11)
  • Re: Ok boys, We need to step up to the plate.... - Lee Cornett 12:58:28 03/17/03 (0)
  • Sorry - Karl in KS 23:03:52 03/16/03 (0)
  • 195/70/14 - Robert Bondi 22:43:40 03/15/03 (3)
    • LOL! wrong type of nitrous.... - Scott 22:54:04 03/15/03 (2)
      • No, they're actually the same - Robert Bondi 04:12:11 03/16/03 (1)
        • AKA Hippie Crack - ChuckNC 07:19:40 03/16/03 (0)
  • LOL, good luck! - TCD 18:15:36 03/15/03 (4)
    • Oh yeah? well you'll never hook up! So there! - Scott 18:19:39 03/15/03 (3)
      • Sad, you'll be happy with close! - TCD 18:22:09 03/15/03 (2)
        • Solution Numero Uno - justin webster 19:07:05 03/15/03 (1)
          • Re: Solution Numero Uno - Scott 19:44:09 03/15/03 (0)
• ATL guys... - ChuckNC 17:59:17 03/15/03 (1)
  • Thanks Chuck! nt - Scott 18:04:05 03/15/03 (0)
• My car quit running!! - David B 17:49:27 03/15/03 (1)
  • Man thats awesome... - Scott 18:05:53 03/15/03 (0)
• Vandals..now I need chrome - Luke 16:13:45 03/15/03 (6)
  • Called Drip Rail Trim.. or chrome. Takes a tool - Lars OBG 17:54:09 03/15/03 (2)
    • Re: Called Drip Rail Trim.. or chrome. Takes a tool - justin webster 18:17:05 03/15/03 (1)
      • Lemme look around... I may come up with one. - Lars OBG 18:52:57 03/15/03 (0)
  • Re: Vandals..now I need chrome - Blair 17:33:04 03/15/03 (2)
    • Re: Vandals..now I need chrome - Luke 17:43:21 03/15/03 (1)
      • Re: Vandals..now I need chrome - justin webster 17:49:05 03/15/03 (0)
• head, exhaust swap question. - Matt C 14:11:21 03/15/03 (1)
  • I pulled mine with the Exhaust Manifold still on.. - Tom in MO 12:11:05 03/17/03 (0)
• about a timing Chain - Pat Welch 14:02:53 03/15/03 (1)
  • I think you clicked the wrong bookmark.... - Scott 16:33:05 03/15/03 (0)
• E12 headed West on I-64 - Jeff C 10:51:39 03/15/03 (5)
  • Ell Be Beck!! - Lars Olbimmerguy 11:43:07 03/15/03 (0)
  • Ell Be Beck!! - Lars Olbimmerguy 11:43:06 03/15/03 (3)
    • OK. What happened... and I was doing so good. :>( - Lars 11:44:42 03/15/03 (2)
      • At first glance... - Tulsa Dave 11:58:42 03/15/03 (1)
        • (burp!) Huh? BTW - Lars 12:25:11 03/15/03 (0)
• What a difference timing makes - Phil 00:26:01 03/15/03 (2)
  • I second that emotion (slightly long) - Remy Davison 10:42:19 03/15/03 (0)
  • thanks for the feedback - Peter Florance 05:04:52 03/15/03 (0)
• Trade E12 for my '78 Alfa Romeo Spider? Anyone? - Jeff Olson 23:07:25 03/14/03 (3)
  • Call Al Taylor in Whittakers NC. He loves the.... - JB 14:11:03 03/17/03 (0)
  • I know someone, but we're in . . . - John in Simi Valley 17:54:00 03/15/03 (1)
    • Alfa Freak!?! ALFA FREAK!?!... Hey! - Lars Olalfaguy 18:55:22 03/15/03 (0)
• 533i parts for my 530i - joe in portland 22:59:38 03/14/03 (3)
  • Seat issues - Peter Claassen 11:17:11 03/15/03 (1)
    • Actually, if the 530 has thermals.... they are two - Lars OBG 11:47:25 03/15/03 (0)
  • Re: 533i parts for my 530i - Mike W. 23:42:16 03/14/03 (0)
• 77 630 seats - Pete Reeves 21:49:19 03/14/03 (1)
  • Nooooo ... Sorry, but the seat cushions - Lars Olbimmerguy 00:47:06 03/15/03 (0)
• Torque settings - Lou in Denver 21:38:01 03/14/03 (3)
  • 30 ft lbs? - Peter Florance 05:06:29 03/15/03 (1)
    • 14-16 ft/lb for an 8mm stud - David B 17:15:18 03/15/03 (0)
  • snug to the touch - Jeff C 21:43:46 03/14/03 (0)
• curious ebay sale - ...tom 17:45:55 03/14/03 (3)
  • It's a US car... - Frank H 10:36:50 03/15/03 (0)
  • Re: curious ebay sale - Eric Q 20:43:57 03/14/03 (0)
  • It looks to be in beautiful condition, good luck - Scott 20:40:10 03/14/03 (0)
• 3speed auto from hell - alessandro corsodoro 14:27:03 03/14/03 (2)
  • Two clutch packs... one for forward gears - Lars Olbimmerguy 15:09:48 03/14/03 (1)
    • Oh and never tow a 3HP rear wheels turning - Lars 16:18:07 03/14/03 (0)
• Adam Wilson - Badge Artwork - Troy Rudolph (Webmaster) 13:28:53 03/14/03 (7)
  • Hey Randy - Adam Wilson 13:46:49 03/14/03 (6)
    • I'm still here - car had been stored for winter - Randy McCafferty 16:16:35 03/14/03 (5)
      • tiff is OK! Thanks! (eom) - Troy Rudolph (Webmaster) 16:34:56 03/14/03 (0)
      • Another Question - Randy 16:22:00 03/14/03 (3)
        • I gots the money - Peter Florance 16:28:54 03/14/03 (2)
          • I thought I sent you an email - Peter Florance 16:29:42 03/14/03 (1)
            • your cars look great.... - Randy M 16:35:27 03/14/03 (0)
• Mystery Part - Derek 11:55:15 03/14/03 (4)
  • valence - ...tom 12:02:06 03/14/03 (3)
    • Re: valence - Derek 12:42:53 03/14/03 (2)
      • that's the one, up to 9/76 - ...tom 12:51:17 03/14/03 (1)
        • Thanks Tom...I appreciate it. (nt) - Derek 14:30:01 03/14/03 (0)
• 5er Fest Poll Results are Posted! - Shifty Brad in Louisiana 10:41:21 03/14/03 (0)
• Rocker molding/trim question - Randy M 06:45:12 03/14/03 (6)
  • Re: Rocker molding/trim question - Will Ollison 09:32:04 03/14/03 (5)
    • Lights/Carlisle - Randy M 10:09:52 03/14/03 (0)
    • mini-meet at Carlisle? - ...tom 09:55:47 03/14/03 (3)
      • Re: mini-meet at Carlisle? - Randy 10:27:01 03/14/03 (0)
      • Re: mini-meet at Carlisle? - Greg 10:00:33 03/14/03 (1)
        • Have the party in Carlisle!! - Randy M. 10:12:59 03/14/03 (0)
• Three 528i E12s -- for FREE - John in Simi Valley 00:50:39 03/14/03 (3)
  • i've seen the pictures.. - ...tom 17:22:57 03/14/03 (0)
  • Entire cars only - John in Simi Valley 13:47:50 03/14/03 (0)
  • Re: Three 528i E12s -- for FREE - Mike V 12:47:46 03/14/03 (0)
• Selector shaft seal - Don Daynes 00:16:47 03/14/03 (2)
  • Re: Selector shaft seal - Jeff C 15:15:31 03/14/03 (0)
  • Re: Selector shaft seal - Peter Florance 06:26:42 03/14/03 (0)
• Throttle - Dan Lafley 23:37:42 03/13/03 (1)
  • Re: Throttle - Peter Florance 05:45:51 03/14/03 (0)
• E12 M535i on EBAY - Luke 23:26:38 03/13/03 (1)
  • Re: E12 M535i on EBAY - Mr. Coffey 23:55:29 03/13/03 (0)
• Interior (seats only) - Mike 21:29:27 03/13/03 (2)
  • Try this link - Lars Olbimmerguy 21:37:17 03/13/03 (1)
    • Sorry, That was to the 2002 page...You have to - Lars. 21:39:43 03/13/03 (0)
• Spark advance - Andrew 20:49:00 03/13/03 (2)
  • Re: Spark advance - Peter Florance 21:27:29 03/13/03 (1)
    • timing article (link) - Peter Florance 21:30:17 03/13/03 (0)
• Stuff... (e12 related) - Kaveman 20:03:53 03/13/03 (1)
  • Re: Stuff... (e12 related) - Stan 20:34:46 03/13/03 (0)
• Shameless Plug: A/C Pump hits the garbage tomorro - j. griffith 18:23:14 03/13/03 (1)
  • Re: Shameless Plug: A/C Pump hits the garbage tomorro - ChuckNC 18:36:53 03/13/03 (0)
• Clock replacement questions - Allen 16:46:33 03/13/03 (4)
  • Re: Clock replacement questions - Allen 12:07:39 03/14/03 (0)
  • Re: Clock replacement questions - T.Han 23:22:35 03/13/03 (2)
    • Re: Clock replacement questions - Peter Florance 06:15:31 03/14/03 (1)
      • Where can I find an analog clock for an '81 E12? - Allen 23:39:40 03/14/03 (0)
• Experimenting with Aluminum spring perch height - Misha 15:44:07 03/13/03 (0)
• Tune up follies and exhaust manifold question - Alex Lugo 14:55:28 03/13/03 (1)
  • Heat sheilds (nt) - billy in SLO 21:33:47 03/13/03 (0)
• missing wire on light switch - Kristopher Barrett 13:17:35 03/13/03 (0)
• thin head gasket - don 12:43:18 03/13/03 (1)
  • Alta Vista - Troy Rudolph 19:50:23 03/13/03 (0)
• Shifter Boot, Instrument Cluster Light - Chris 11:58:07 03/13/03 (1)
  • Re: Shifter Boot, Instrument Cluster Light - Bob Iverach 12:12:03 03/13/03 (0)
• Ignition Control Unit - Shiro Elex 11:55:47 03/13/03 (1)
  • Re: Ignition Control Unit - Troy Rudolph 12:56:45 03/13/03 (0)
• Rear Muffler Bracket - Klaus 10:14:52 03/13/03 (7)
  • P/N 18-21-1-246-247 (eom) - Troy Rudolph 12:58:13 03/13/03 (1)
    • Re: P/N 18-21-1-246-247 (eom) - Klaus 21:47:55 03/13/03 (0)
  • Bolted up to underside of chassis - Chris 10:48:16 03/13/03 (0)
  • Re: Rear Muffler Bracket - Troy Rudolph 10:44:26 03/13/03 (0)
  • Re: Rear Muffler Bracket - Peter Florance 10:24:47 03/13/03 (2)
    • Re: Rear Muffler Bracket - Kristopher Barrett 11:48:46 03/13/03 (1)
      • Re: Rear Muffler Bracket - Peter Florance 12:01:12 03/13/03 (0)
• paging Tom Rasmussen - Peter Florance 09:45:29 03/13/03 (0)
• Part number check? - Derek 09:38:43 03/13/03 (6)
  • Re: Part number check? - Troy Rudolph 13:02:08 03/13/03 (1)
    • Oops! - Troy Rudolph 13:04:31 03/13/03 (0)
  • valence panel - ...tom 10:42:25 03/13/03 (3)
    • Sorry, I gave the wrong part number... - Derek 12:16:48 03/13/03 (2)
      • 834 735 is the nose panel - ...tom 12:25:49 03/13/03 (1)
        • windoze screen shots - Kristopher Barrett 13:23:21 03/13/03 (0)
• Ignition/Start probs...checking... - Dave D 08:22:46 03/13/03 (0)
• 528i parts? - Dale 02:55:54 03/13/03 (9)
  • Hidden away and often overlooked... - Lars Olbimmerguy 10:37:15 03/13/03 (6)
    • Free Car?! - ChuckNC 11:39:43 03/13/03 (5)
      • Grin! It's pretty amazing.... - Lars Olbimmerguy 12:28:53 03/13/03 (4)
        • If you're feeling snubbed... - Mark 22:05:54 03/13/03 (2)
          • Street address??? - Lars Olbimmerguy 17:52:06 03/14/03 (1)
            • WOOO HOOO! I'm gittin a car! - Mark 20:14:36 03/14/03 (0)
        • Re: Grin! It's pretty amazing.... - Nick, CO 13:53:37 03/13/03 (0)
  • Re: 528i parts? - Peter Florance 06:44:04 03/13/03 (1)
    • Re: 528i parts? - Dale 00:54:58 03/14/03 (0)
• New home page looks great!!! - Nath in Tassie 23:54:34 03/12/03 (0)
• FS:drivers sun visor 25$+shipping...... - Pete 23:50:42 03/12/03 (0)
• 1979 BMW 528i for sale - Jim Skiles 21:44:19 03/12/03 (2)
  • Re: 1979 BMW 528i for sale - Steve, FL 07:32:19 03/13/03 (1)
    • How about LOCATION, PRICE, like, important stuff? - Jeff Olson 09:15:50 03/13/03 (0)
• Jeff C - Jake Hall 19:47:18 03/12/03 (2)
  • Thanks Jake... - Jeff C 19:51:07 03/12/03 (1)
    • Re: Thanks Jake... - Jake Hall 00:10:35 03/13/03 (0)
• Driveshaft Lengths - Jake Hall 19:42:49 03/12/03 (3)
  • Re: Driveshaft Lengths are the same - mark 16:20:37 03/13/03 (0)
  • Re: Driveshaft Lengths - Chris Hollis, Huntsville, AL 08:05:56 03/13/03 (0)
  • Re: Driveshaft Lengths - Mike W. 21:00:24 03/12/03 (0)
• Bavarian manifolds Questions - Canada Karl 19:13:56 03/12/03 (2)
  • Rule of thumb is - Mike W. 20:54:23 03/12/03 (0)
  • Re: Bavarian manifolds Questions - Peter Florance 19:40:07 03/12/03 (0)
• E28 AFM? - Dan Lafley 15:36:47 03/12/03 (1)
  • e28 AFM won't fit - Peter Florance 15:44:53 03/12/03 (0)
• gearbox part numbers - stewart 15:31:40 03/12/03 (5)
  • Re: gearbox part numbers - Al from Oz 21:05:53 03/12/03 (0)
  • 4 speed - Lars Olbimmerguy 17:04:34 03/12/03 (3)
    • yeah but - Peter Florance 17:47:54 03/12/03 (2)
      • Oops... forgot that one... - Lars OBG 22:09:49 03/12/03 (1)
        • Sorry... That's about 30 Centimeters, give or - Lars Olbimmerguy 23:22:25 03/12/03 (0)
• Lights - Dan Lafley 13:10:24 03/12/03 (1)
  • A guess - Trubey 20:17:43 03/12/03 (0)
• 5er link.de - Fellow 5 enthusiast 13:00:30 03/12/03 (0)
• Bavaria Exhaust Manifolds - Tito 12:59:15 03/12/03 (4)
  • Re: Bavaria Exhaust Manifolds - billy 16:36:18 03/12/03 (3)
    • Re: Bavaria Exhaust Manifolds - Billy 17:12:31 03/12/03 (2)
      • hey Tito, or is it Billy? - billy in SLO 17:45:19 03/12/03 (1)
        • Re: hey Tito, or is it Billy? - Tito 18:40:58 03/12/03 (0)
• Whose car is that car? - Wietse - Fort Collins CO 12:21:17 03/12/03 (5)
  • Re: Whose car is that car? - Troy Rudolph 12:35:07 03/12/03 (4)
    • Big Foot, Loch Ness Monster and now this.... - Wietse - Fort Collins CO 08:48:20 03/13/03 (0)
    • T Hansen Value!! - Peter Florance 13:57:12 03/12/03 (2)
      • Re: T Hansen Value!! - T.Han 21:25:57 03/12/03 (1)
        • I have a quote..... - Lars OBG 13:16:11 03/13/03 (0)
• Finally got my Roundel! - Kaveman 12:00:21 03/12/03 (4)
  • Re: Finally got my Roundel! - Adam Wilson 14:30:36 03/12/03 (1)
    • hey, hack mechanic - Peter Florance 15:01:10 03/12/03 (0)
  • Re: Finally got my Roundel! - Troy Rudolph 12:37:30 03/12/03 (0)
  • did you read - Peter Florance 12:05:24 03/12/03 (0)
• I'm Baaaccckkkk - Steve C. 10:28:30 03/12/03 (1)
  • Steve -- where in richmond are you now? - Jeff C 12:43:44 03/12/03 (0)
• Which are the air con relays? - Remy Davison 07:20:34 03/12/03 (2)
  • Thanks Cristian - Remy Davison 00:58:42 03/13/03 (0)
  • Re: Which are the air con relays? - Cristian in Sydney 14:10:49 03/12/03 (0)
• Anyone else near Wilmington DE? - Peter Florance 05:56:17 03/12/03 (2)
  • Re: Anyone else near Wilmington DE? - Adam Wilson 08:16:17 03/12/03 (0)
  • Re: Anyone else near Wilmington DE? - Greg 07:29:06 03/12/03 (0)
• San Diego St. Patrick's Day meet info... - Darin O' The Glenn AKA Darin S. 01:52:47 03/12/03 (0)
• Paging mark - Andrew 22:07:57 03/11/03 (0)
• Look what I found on Ebay.... - Scott 21:00:28 03/11/03 (10)
  • Spolier - Dan Lafley 21:30:25 03/11/03 (3)
    • Re: Spolier - Don Daynes 23:57:06 03/11/03 (2)
      • Really, Mods to what ? - Scott 09:18:40 03/12/03 (1)
        • Re: Really, Mods to what ? - Don Daynes 23:33:11 03/12/03 (0)
  • btw - Peter Florance 21:12:30 03/11/03 (5)
    • Re: btw - TCD 21:48:07 03/11/03 (4)
      • LOL! It's gonna be close.... - Scott 23:03:06 03/11/03 (3)
        • Thanky..... - Dan Lafley 23:29:49 03/11/03 (2)
          • yep... - Scott 09:15:58 03/12/03 (1)
            • Dead link - Dan Lafley 12:01:04 03/12/03 (0)
• Top Quality Microfiber Detailing Thick Cloths etc - Fiber Works 19:04:55 03/11/03 (1)
  • complaint sent (nt) - spam slammer 19:30:12 03/11/03 (0)
• Sebring 12hr OT - Jim 18:51:57 03/11/03 (3)
  • Re: Sebring 12hr OT - Bill Bowes 06:05:29 03/12/03 (1)
    • Re: Sebring 12hr OT - Jim 18:39:53 03/12/03 (0)
  • Bill Bowes? - Peter Florance 06:05:22 03/12/03 (0)
• Still not Seatbelted - Dan Lafley 17:05:13 03/11/03 (0)
• Power windows - Brian in Abilene 15:18:42 03/11/03 (8)
  • Re: Power windows - Tulsa Dave 15:49:37 03/11/03 (7)
    • Thanks, Dave. One further question... - Brian in Abilene 15:58:59 03/11/03 (6)
      • HEY! Kewel Idea!!!! - Lars Olbimmerguy 21:41:32 03/11/03 (3)
        • I think the guys at this junkyard don't care, they - Brian in Abilene 08:44:32 03/13/03 (2)
          • One more thing, they also have an E23. - Brian in Abilene 08:45:38 03/13/03 (1)
            • Check your email... - Tulsa Dave 08:52:23 03/13/03 (0)
      • I'll have to deffer to others on sunroof stuff... - Tulsa Dave 16:48:31 03/11/03 (1)
        • Thanks! I may try that this weekend. - Brian in Abilene 08:42:15 03/13/03 (0)
• Tach Swapping - Chris 15:07:32 03/11/03 (2)
  • Re: Tach Swapping - Bob in San Jose 20:49:22 03/11/03 (0)
  • Re: Tach Swapping - ChuckNC 18:53:00 03/11/03 (0)
• Interior Swap - Mike 11:41:53 03/11/03 (1)
  • ??? 535i came out in 85 I think... - Lars Olbimmerguy 14:11:24 03/11/03 (0)
• F.S. 77 530i - Mike 11:20:01 03/11/03 (0)
• Energy problems - andres 10:17:15 03/11/03 (8)
  • Alternator Reg Brushes - Collins 13:59:43 03/11/03 (0)
  • battery ground strap - Peter Florance 10:49:22 03/11/03 (4)
    • Re: battery ground strap - andres 11:06:18 03/11/03 (3)
      • Relief relay is in fuse box - Peter Florance 11:32:02 03/11/03 (2)
        • Re: Relief relay is in fuse box - andres 14:29:42 03/11/03 (1)
          • good, now - Peter Florance 16:01:13 03/11/03 (0)
  • Maybe Alternator? - JR --- 1978 635CSi 10:22:37 03/11/03 (0)
  • URGENT!!! - andres 10:18:28 03/11/03 (0)
• Paul Bracq - Remy Davison 09:00:27 03/11/03 (2)
  • What page? - Tulsa Dave 10:07:37 03/11/03 (1)
    • Re: What page? - doninportland 10:34:21 03/11/03 (0)
• Paging ...tom - Peter Florance 06:35:21 03/11/03 (1)
  • sure, come on up... anyone else? - ...tom 11:11:11 03/11/03 (0)
• power locks for 79 528i - Art 22:11:36 03/10/03 (8)
  • Re: power locks for 79 528i - Art 22:16:30 03/10/03 (7)
    • which one? - Peter Florance 07:05:33 03/11/03 (6)
      • Re: which one? - Art 00:00:48 03/12/03 (0)
      • Re: which one? - Jake Hall 08:35:52 03/11/03 (4)
        • Re: which one? - Peter Florance 09:16:04 03/11/03 (3)
          • Re: which one? - Jake Hall 10:37:51 03/11/03 (2)
            • re-set by pressing button back in - Peter Florance 10:50:01 03/11/03 (1)
              • Re: re-set by pressing button back in - Jake Hall 13:06:59 03/11/03 (0)
• 1995 530 seats fit in 1980 528? - Jeff C 21:33:11 03/10/03 (2)
  • Re: 1995 530 seats fit in 1980 528? - Loren 10:01:34 03/12/03 (1)
    • Re: 1995 530 seats fit in 1980 528? - Jeff C 12:49:25 03/12/03 (0)
• injector refurb? - ChuckNC 21:01:30 03/10/03 (1)
  • Re: injector refurb? - Mike V 07:43:39 03/11/03 (0)
• Distributor - Dan Lafley 19:24:04 03/10/03 (0)
• To Zane........ - BNC 19:16:36 03/10/03 (1)
  • And a big pat on the back to Adam Wilson........ - BNC 20:30:33 03/10/03 (0)
• Thanks Everyone - Mike 19:01:42 03/10/03 (0)
• Hey, Lee Cornett.......... - BNC 18:45:02 03/10/03 (0)
• hood cord - maria 18:35:30 03/10/03 (2)
  • Re: hood cord - Tulsa Dave 18:47:53 03/10/03 (1)
    • Re: hood cord - maria 19:06:03 03/11/03 (0)
• 3.5 swap update and photo link - billy in SLO 17:54:20 03/10/03 (9)
  • Thats Sweet Billy, hope to c it in person at 5fest - Scott 17:22:26 03/11/03 (0)
  • Hey, NICE motor you got there! - John in Simi Valley '81 528i 14:33:06 03/11/03 (2)
    • Nice Billy - Fellow SLO'er 12:58:14 03/12/03 (1)
      • thanks mystery man, I would never work in my "good - billy in SLO 17:53:01 03/12/03 (0)
  • Check before firing - Peter Claassen 22:31:32 03/10/03 (2)
    • Thanks, I always ignore Sean's posts (lol)... - billy 12:05:42 03/11/03 (1)
      • That's Right... Just Ignore Me! :^) - Kaveman 00:18:31 03/12/03 (0)
  • Re: 3.5 swap update and photo link - BIGERIK 21:19:24 03/10/03 (0)
  • Re: 3.5 swap update and photo link - aL FROM oZ 20:20:24 03/10/03 (0)
• ECU repair or replace? - paul O. 16:16:35 03/10/03 (7)
  • Re: ECU repair or replace? - Kaveman 00:20:21 03/12/03 (3)
    • Re: ECU repair or replace? - Paul O 17:20:52 03/12/03 (2)
      • Re: ECU repair or replace? - Kaveman 19:10:21 03/12/03 (1)
        • 118 will work fine in 1981 car. - Peter Florance 21:26:23 03/12/03 (0)
  • Re: ECU repair or replace? - Troy Rudolph 16:39:32 03/10/03 (2)
    • Re: ECU repair or replace? - P Odom 16:43:40 03/10/03 (1)
      • Re: ECU repair or replace? - Troy Rudolph 17:08:32 03/10/03 (0)
• Troubleshooting Lambda Conversion Wiring (long) - Chris 15:08:37 03/10/03 (0)
• Getrag 280 - Nick, CO 14:55:20 03/10/03 (6)
  • Re: Getrag 280 - Troy Rudolph 15:08:12 03/10/03 (5)
    • It's the e34 M5 - Nick, CO 04:15:46 03/11/03 (1)
      • Re: It's the e34 M5 - Troy Rudolph 11:17:24 03/11/03 (0)
    • Re: Getrag 280 - Eric Q 15:28:42 03/10/03 (2)
      • Re: Getrag 280 - Troy Rudolph 16:38:07 03/10/03 (1)
        • Re: Getrag 280 - Eric Q 17:46:43 03/10/03 (0)
• Paging Misha - Cristian in Sydney 14:31:38 03/10/03 (1)
  • NOPE: Never received your reply......... - Misha 17:29:13 03/10/03 (0)
• 83 Euro e28 528i start and die problems? - Craig Day 14:30:47 03/10/03 (0)
• Window mechanisim Q's - Cristian in Sydney 14:29:57 03/10/03 (1)
  • Re: Window mechanisim Q's - Al from Oz. 14:37:56 03/10/03 (0)
• Paging Al Denovan in Brissy - Cristian in Sydney 14:26:13 03/10/03 (1)
  • I'll call Tuesday. nt. - Al from Oz 14:36:01 03/10/03 (0)
• $15 AMC head! - Nick, CO 13:41:24 03/10/03 (6)
  • $15, and I thought I could find cheap stuff - Mike W. 23:28:46 03/10/03 (0)
  • Re: $15 AMC head! - Lou in Denver 14:14:30 03/10/03 (4)
    • Re: $15 AMC head! - Nick, CO 14:43:04 03/10/03 (3)
      • Bavaria? - ChuckNC 16:47:56 03/10/03 (1)
        • Re: Bavaria? - Nick, CO 04:26:29 03/11/03 (0)
      • Yards - Lou in Denver 15:03:57 03/10/03 (0)
• Headers - JR --- 1978 635CSi 07:09:32 03/10/03 (5)
  • Re: Headers - Matt C 20:13:12 03/10/03 (0)
  • Re: Headers - Troy Rudolph 10:56:09 03/10/03 (3)
    • re:headers - BNC 19:29:45 03/10/03 (0)
    • Hartge - Chris 11:35:15 03/10/03 (1)
      • Bavarian Autosport - Nick, CO 13:37:28 03/10/03 (0)
• Poster - T.Han 01:57:22 03/10/03 (0)
• Thanks Adam for that Roundel article - Mr. Coffey 22:10:08 03/09/03 (0)
• 1974, 525 - james Grant 19:53:51 03/09/03 (4)
  • Re: 1974, 525 - ChuckNC 17:04:28 03/10/03 (0)
  • Re: 1974, 525 - Blair 23:53:05 03/09/03 (2)
    • Re: 1974, 525 - Mark 09:45:56 03/10/03 (1)
      • Re: 1974, 525 - Nath in Tassie 17:32:54 03/12/03 (0)
• Fasten Your Seat Belt! - Dan Lafley 17:08:23 03/09/03 (3)
  • If it annoys you... - Karl in KS 20:48:09 03/09/03 (0)
  • Yes. comes on when key goes on... - Lars... OBG 18:50:41 03/09/03 (1)
    • Re: Yes. comes on when key goes on... - Scott 20:16:20 03/09/03 (0)
• Valve adjustment help... - Brian in Abilene 12:45:07 03/09/03 (10)
  • Thanks all! - Brian in Abilene 08:14:07 03/10/03 (2)
    • Re: Thanks all! - Peter Florance 08:23:29 03/10/03 (1)
      • Interesting - Brian in Abilene 15:15:07 03/11/03 (0)
  • They B in A - Chris Hollis, Huntsville 17:25:11 03/09/03 (0)
  • Re: Valve adjustment help... - Mike W. 13:34:41 03/09/03 (0)
  • Got ya covered if it's a Manual Transmission - Lars Olbimmerguy 13:15:03 03/09/03 (3)
    • I adjust valves... - Karl in KS 20:54:19 03/09/03 (0)
    • bwah ha! thats why you and i are sans wives - mikey 18:37:05 03/09/03 (0)
    • Fine minds and all that.... - Lars 13:22:58 03/09/03 (0)
  • Re: Valve adjustment help... - james 13:14:50 03/09/03 (0)
• West Coast Cars - ChuckNC 04:34:00 03/09/03 (1)
  • Normal California Cars - Mike W. 20:37:29 03/09/03 (0)
• Passing California Smog...Tips? - Todd 01:06:36 03/09/03 (1)
  • Re: Passing California Smog...Tips? - Mike W. 13:42:24 03/09/03 (0)
• E12 WAP site - Luke 22:53:20 03/08/03 (3)
  • E12 WAP site - Christian oak,ca 16:26:16 03/10/03 (2)
    • works fine for me - Luke 21:49:44 03/11/03 (1)
      • Works much better - Christian oak,ca 16:41:31 03/12/03 (0)
• Lambda Conversion: Wiring Tach Lead from Coil Neg - Chris 22:24:30 03/08/03 (3)
  • Re: Lambda Conversion: Wiring Tach Lead from Coil Neg - Peter Florance 09:43:14 03/09/03 (2)
    • How Does the Wiring Go? (more) - Chris 13:37:18 03/09/03 (1)
      • Re: How Does the Wiring Go? (more) - Peter Florance 15:54:17 03/09/03 (0)
• Won't Start (newbie) - Mike 19:02:34 03/08/03 (13)
  • on the other hand... - Karl in KS 21:00:22 03/09/03 (0)
  • Maybe the starter..... - 3.5cs 21:29:33 03/08/03 (11)
    • Unless it cranks and won't start... - Tulsa Dave 21:38:14 03/08/03 (10)
      • Same Problem with Interesting Side Note.... - Lars Olbimmerguy 01:07:54 03/09/03 (8)
        • AH HA! That is the EXACT same problem... - Tulsa Dave 09:19:24 03/09/03 (6)
          • If I do the "Wild Crazy Pumping" I don't have to > - Lars Olbimmerguy 10:07:52 03/09/03 (5)
            • Vapor lock? - Remy Davison 08:09:03 03/10/03 (0)
            • Thanks for the thoughts... something to try. More> - Lars Olbimmerguy 13:09:05 03/09/03 (0)
            • I don't think it is fuel pressure or... - Tulsa Dave 12:04:16 03/09/03 (0)
            • fuel pump not working during cranking - Peter Florance 11:30:29 03/09/03 (0)
            • Marginal fuel pressure? (nt) - Jim Davis 10:46:14 03/09/03 (0)
        • Re: Same Problem with Interesting Side Note.... - Mike 08:54:44 03/09/03 (0)
      • True.... - 3.5cs 22:27:15 03/08/03 (0)
• E12 TO EXTREMES - Zane 17:38:55 03/08/03 (8)
  • HEY! I just got my Roundel today! What gives! - rick 19:09:58 03/10/03 (0)
  • Re: E12 TO EXTREMES - Jim Davis - 5er Fest 2003 Treasurer 23:26:53 03/08/03 (0)
  • Thank you Zane, and a word to firstfivers - Adam Wilson 19:01:44 03/08/03 (5)
    • Zane's and Adam's e12s - Mark 11:58:18 03/09/03 (4)
      • Great book Mark... - Tulsa Dave 12:07:01 03/09/03 (3)
        • Dave, where can we get it online that takes paypal - Scott 21:46:52 03/09/03 (2)
          • Not sure, but I'll ask around...(nt) - Tulsa Dave 07:21:05 03/10/03 (1)
            • Re: Not sure, but I'll ask around...(nt) - Mark 09:34:23 03/10/03 (0)
• Roundel E12 article teaser page (picture) - Adam Wilson 14:42:26 03/08/03 (5)
  • Thanks Adam! Great Job! - Jim Davis - 5er Fest 2003 Treasurer 23:21:24 03/08/03 (0)
  • Damn... - Luke 19:11:29 03/08/03 (1)
    • Re: Damn... - Jim 09:41:17 03/09/03 (0)
  • Re: Roundel E12 article teaser page (picture) - trubey 16:00:22 03/08/03 (1)
    • Re: Are two articles in two months enough... - Tulsa Dave 17:26:38 03/08/03 (0)
• Cylinder head FAQ added - Peter Florance - First Fives Dictator for Life 13:58:15 03/08/03 (1)
  • Thanks, Mike and Peter - KSBinVA 11:45:34 03/10/03 (0)
• New Home Page Splash - Troy Rudolph 12:15:27 03/08/03 (7)
  • these would make good posters... - ...tom 10:37:35 03/09/03 (1)
    • Re: My garage wall would love one! (nt) - Tulsa Dave 12:36:12 03/09/03 (0)
  • Awsome! - John in Simi Valley 22:39:46 03/08/03 (0)
  • Another "Classy" Home Page - very nice. - Jefflee 13:54:45 03/08/03 (0)
  • very nice - Peter Florance 13:48:13 03/08/03 (2)
    • Re: very nice - T.Han 14:08:27 03/08/03 (1)
      • Re: very nice - Peter Florance 10:04:47 03/09/03 (0)
• Starter relay. - Chris Barnard 11:36:04 03/08/03 (0)
• Wanted: AC Parts - Wietse 00:32:42 03/08/03 (3)
  • My .02 - Mike W. 12:56:37 03/08/03 (0)
  • Re: Wanted: AC Parts - Troy Rudolph 12:00:01 03/08/03 (0)
  • Re: Wanted: AC Parts - Peter Florance 08:02:14 03/08/03 (0)
• Repair shops --- Detroit Area - Alex Lugo 23:26:38 03/07/03 (4)
  • Couple of shops... - Trubey 00:02:45 03/08/03 (3)
    • Re: Couple of shops... - Alex Lugo 08:00:48 03/08/03 (2)
      • Re: Couple of shops... - trubey 10:49:27 03/08/03 (1)
        • Re: Couple of shops... - Alex Lugo 14:02:11 03/09/03 (0)
• L jet diagram updated - Peter Florance - First Fives Dictator for Life 23:16:24 03/07/03 (5)
  • Re: L jet diagram updated - Michael 13:31:27 03/08/03 (2)
    • Adobe Acrobat - Peter Florance 13:45:30 03/08/03 (1)
      • Re: Adobe Acrobat - Barry in NJ 13:55:37 03/08/03 (0)
  • You must be bored... - Tulsa Dave 23:19:11 03/07/03 (1)
    • Yeah - Peter Florance 23:25:03 03/07/03 (0)
• Somebody buy Fred's 530! - Trubey 23:03:07 03/07/03 (0)
• Lights Lights Lights - Dan Lafley 22:48:15 03/07/03 (2)
  • console - Karl in KS 21:13:14 03/09/03 (0)
  • Re: Lights Lights Lights - Blair 22:51:46 03/07/03 (0)
• Ljet bench testing - Peter Florance 21:38:25 03/07/03 (0)
• Vacume Advance - Dan Lafley 21:14:48 03/07/03 (4)
  • and...... - chris Hollis 21:38:08 03/07/03 (2)
    • advance diaphram - Dan Lafley 21:46:48 03/07/03 (1)
      • Re: advance diaphram - chris hollis 06:40:28 03/08/03 (0)
  • Re: Vacume Advance - Peter Florance 21:35:00 03/07/03 (0)
• SMOG HELLLLLLP!!!!!!!!!! - BIGERIK 19:53:31 03/07/03 (8)
  • CO adjustment OR Fuel Regulator - John in Simi Valley 14:56:36 03/11/03 (1)
    • Re: CO adjustment OR Fuel Regulator - BIGERIK 20:33:31 03/13/03 (0)
  • Need more info - Mike W. 12:59:50 03/08/03 (5)
    • Re: Need more info - BIGERIK 22:30:53 03/08/03 (4)
      • Re: Need more info - Mike W. 13:53:40 03/09/03 (3)
        • Re: Need more info - BIGERIK 14:35:11 03/09/03 (2)
          • Re: Need more info - Mike W. 20:26:51 03/09/03 (1)
            • I was not clear enough my fault - BIGERIK 21:06:52 03/10/03 (0)
• Vibration between 20-30mph - Stuart 19:19:54 03/07/03 (2)
  • Re: Vibration between 20-30mph - Kaveman 19:29:32 03/07/03 (1)
    • Re: Vibration between 20-30mph - Jeff C 21:13:08 03/07/03 (0)
• 530i 3.0 & Subframe in Houston. - TexasTim 19:15:22 03/07/03 (2)
  • Roadfly, but not a lot of traffic... - LarsOlbimmerguy 00:10:00 03/08/03 (1)
    • Thanks, Lars - Will do. - TexasTim 07:50:22 03/08/03 (0)
• Roundel E12 article (surprise spoiler message) - Adam Wilson 19:10:58 03/07/03 (14)
  • all I can say... - Karl in KS 21:19:28 03/09/03 (0)
  • figures... - Kevin Kew 22:22:23 03/08/03 (1)
    • Same hear..now I have to renew it, and get a back - Scott 09:04:47 03/09/03 (0)
  • So... I'm Looking and I'm Thinking... That rear - Lars Olbimmerguy... 13:31:12 03/08/03 (1)
    • Re: So... I'm Looking and I'm Thinking... That rea - Adam Wilson 14:31:00 03/08/03 (0)
  • Kudos to you Adam! - Frank H 11:40:51 03/08/03 (1)
    • Re: Kudos to you Adam! - Adam Wilson 14:26:57 03/08/03 (0)
  • Got mine today... - Tulsa Dave 23:21:51 03/07/03 (0)
  • Re: Roundel E12 article (surprise spoiler message) - TCD 20:15:02 03/07/03 (5)
    • dyno graph - Adam Wilson 20:51:11 03/07/03 (4)
      • AT THE WHEELS?!?!?!? - Scott 22:43:51 03/07/03 (3)
        • Re: AT THE WHEELS?!?!?!? - Blair 22:53:56 03/07/03 (2)
          • Re: AT THE WHEELS?!?!?!? - Adam Wilson 07:47:09 03/08/03 (1)
            • Re: AT THE WHEELS?!?!?!? - TCD 09:40:30 03/08/03 (0)
• "Fuel Inj. Corp." AFM. Experiences?? - TexasTim 19:06:29 03/07/03 (1)
  • Re: "Fuel Inj. Corp." AFM. Experiences?? - Kaveman 19:35:22 03/07/03 (0)
• Euro 3.5 218 hp vs Calif Smog - Alan A - Northern Calif 16:44:29 03/07/03 (1)
  • Re: Euro 3.5 218 hp vs Calif Smog - Eric Q 18:22:34 03/07/03 (0)
• '78 530 Scouted in PDX. - doninportland (e28 visitor) 16:04:47 03/07/03 (0)
• Old Injectors in Lambda L-jet Upgrade - Chris 13:59:36 03/07/03 (4)
  • Re: Old Injectors in Lambda L-jet Upgrade - Robert Bondi 20:53:53 03/07/03 (0)
  • Re: Old Injectors in Lambda L-jet Upgrade - Troy Rudolph 14:11:51 03/07/03 (2)
    • Yes, 530 injectors in a 528 Lambda Upgrade - Chris 14:26:22 03/07/03 (1)
      • Re: Yes, 530 injectors in a 528 Lambda Upgrade - Troy Rudolph 14:59:11 03/07/03 (0)
• Windshield update and advice - Jeff C 13:38:45 03/07/03 (2)
  • More - Jeff C 18:49:30 03/07/03 (1)
    • dumb question - Peter Florance 23:43:27 03/07/03 (0)
• dashboard - andres 12:32:23 03/07/03 (1)
  • Re: dashboard - Kristopher Barrett 17:56:58 03/07/03 (0)
• has anyone dealt with NOPI? - ChuckNC 12:25:53 03/07/03 (4)
  • Ummmm I wonder how their Jet Chip upgrade works nt - Trubey 23:10:04 03/07/03 (1)
    • Noticed that... - Tulsa Dave 23:20:28 03/07/03 (0)
  • Re: has anyone dealt with NOPI? - Troy Rudolph 14:08:55 03/07/03 (1)
    • Got a Fan Clutch from them recently , , , - Jefflee 14:46:01 03/07/03 (0)
• Euro Engine/Trans.... Short time left.. California - Lars Olbimmerguy 11:20:26 03/07/03 (0)
• Front speakers / Rear speakers - Mark Schuurman 07:56:43 03/07/03 (21)
  • Pushing my luck here? - Mark Schuurman 06:59:37 03/08/03 (2)
    • Re: Pushing my luck here? - Andrew 18:40:48 03/08/03 (1)
      • Re: Pushing my luck here? - Mark Schuurman 04:52:41 03/09/03 (0)
  • Speaker options/opinions - Trubey 22:24:26 03/07/03 (0)
  • Cut parcel tray??? Important - Andrew 16:38:26 03/07/03 (8)
    • Probably not to worry.... - Lars Olbimmerguy 19:09:09 03/07/03 (7)
      • It's called a "db race" - ChuckNC 21:29:09 03/07/03 (6)
        • Rubber Soul, track #1 & More on dbs - Trubey 22:46:55 03/07/03 (4)
          • Hey! I gotcher "Stiffly Controlled...." youngster! - Lars... Olbimmerguy 23:25:40 03/07/03 (3)
            • You get the beer fridge installed yet Lars? - Tulsa Dave 23:36:15 03/07/03 (2)
              • Hell... I thought you said Wet Bar.... All ready>> - Lars Olbimmerguy 00:14:51 03/08/03 (0)
              • DOH! I put in the beer fridge AFTER the 3.5 swap - Trubey 00:08:37 03/08/03 (0)
        • YEAH!,,, and the Lennon Sisters... and Frank!!! - Lars Olbimmerguy 22:13:38 03/07/03 (0)
  • Re: Front speakers / Rear speakers - Andrew 16:34:47 03/07/03 (0)
  • As Troy said..the kick panels or quarter panels - Lars Olbimmerguy 11:25:16 03/07/03 (0)
  • Re: Front speakers / Rear speakers - Mark Schuurman 10:57:35 03/07/03 (0)
  • AND... just what's wrong with "Mono Sound" - Lars Olbimmerguy 10:47:28 03/07/03 (2)
    • Re: AND... just what's wrong with "Mono Sound" - Mark Schuurman 10:54:02 03/07/03 (1)
      • Don't forget "The Lone Ranger" & "Sky King" - Jefflee 15:03:34 03/07/03 (0)
  • Troy is right about cutting on rear package tray>> - Lars Olbimmerguy 10:42:02 03/07/03 (0)
  • Re: Front speakers / Rear speakers - Troy Rudolph 09:34:30 03/07/03 (0)
• Camshaft for Euro525 Question - Mark Schuurman 07:53:17 03/07/03 (9)
  • Re: Camshaft for Euro525 Question - Troy Rudolph 09:44:34 03/07/03 (8)
    • Re: Camshaft for Euro525 Question - Mark Schuurman 11:00:32 03/07/03 (7)
      • Re: Camshaft for Euro525 Question - Troy Rudolph 11:39:49 03/07/03 (5)
        • Re: Camshaft for Euro525 Question - Mark Schuurman 14:50:29 03/07/03 (4)
          • Re: Camshaft for Euro525 Question - Peter Florance 14:56:59 03/07/03 (3)
            • Re: Camshaft for Euro525 Question - Mark Schuurman 18:11:44 03/07/03 (2)
              • Re: Camshaft for Euro525 Question - Peter Florance 18:18:21 03/07/03 (1)
                • Re: Camshaft for Euro525 Question - Mark Schuurman 03:23:08 03/08/03 (0)
      • Re: Camshaft for Euro525 Question - Peter Florance 11:35:05 03/07/03 (0)
• electric windows - chris b 05:44:37 03/07/03 (2)
  • Re: electric windows - Troy Rudolph 09:41:22 03/07/03 (0)
  • Re: electric windows - Peter Florance 06:50:36 03/07/03 (0)
• Paging Wietse in Ft. Collins! - Nick, CO 04:56:46 03/07/03 (1)
  • Sent you mail... - Wietse 09:00:25 03/11/03 (0)
• Wheel Bearings In...Thanks Scott, Chris, Peter.. - Dave D 23:53:12 03/06/03 (4)
  • Something else... - Scott 08:57:31 03/07/03 (2)
    • heat - Peter Florance 09:07:20 03/07/03 (1)
      • Cool, I'll have to try that.... - Scott 10:03:39 03/07/03 (0)
  • Re: Wheel Bearings In...Thanks Scott, Chris, Peter.. - Peter Florance 02:55:22 03/07/03 (0)
• Noisy Engine Fan - Alex Lugo 23:36:29 03/06/03 (3)
  • Re: Noisy Engine Fan - james 01:46:24 03/07/03 (0)
  • Re: Noisy Engine Fan - Niklas Edlund (Sweden) 00:56:09 03/07/03 (1)
    • Thank guys! I'll check those things out. nt - Alex Lugo 06:44:04 03/07/03 (0)
• C pillar grills - Al from Oz 23:15:55 03/06/03 (7)
  • I always paint mine body color - BillW in STL 11:54:55 03/12/03 (0)
  • Re: C pillar grills - Karl in KS 16:46:26 03/07/03 (0)
  • Re: check it - mark 00:12:42 03/07/03 (0)
  • Re: check it - mark 00:12:33 03/07/03 (0)
  • Re: C pillar grills - Lenny D. 23:38:15 03/06/03 (1)
    • Another idea - Mr. Coffey 23:55:49 03/06/03 (0)
  • I did the opposite - Mike W. 23:33:56 03/06/03 (0)
• Does anyone have any experience with these? - Scott 22:50:00 03/06/03 (7)
  • Got them installed today - Nick, CO 21:43:30 03/07/03 (1)
    • Thanks For the info Nick! - Scott 22:43:10 03/07/03 (0)
  • I just bought some.. - Nick, CO 04:47:52 03/07/03 (0)
  • Re: Does anyone have any experience with these? - will ollison 23:36:44 03/06/03 (2)
    • Catz H1? - Peter Florance 06:53:13 03/07/03 (1)
      • Re: Catz H1? - will ollison 13:25:35 03/07/03 (0)
  • Re: Does anyone have any experience with these? - Dave D 23:29:53 03/06/03 (0)
• Does anyone have a part # for these? - Scott 22:30:25 03/06/03 (3)
  • Re: Does anyone have a part # for these? - Bob in San Jose 05:34:12 03/08/03 (0)
  • LOL - TCD 23:11:01 03/06/03 (1)
    • Quit laughin and give me a part #.... - Scott 09:24:07 03/07/03 (0)
• starter interchange question - rick 22:28:54 03/06/03 (2)
  • E34 starter - Remy Davison 08:56:25 03/07/03 (0)
  • Yes, but - Mike W. 23:41:34 03/06/03 (0)
• anyone need a cylinder head? - rick 22:23:39 03/06/03 (4)
  • Re: anyone need a cylinder head? - Tom in MO 07:29:47 03/07/03 (1)
    • Re: anyone need a cylinder head? - rick 16:37:34 03/07/03 (0)
  • MN 5er? - Mr. Coffey 23:32:15 03/06/03 (1)
    • Re: MN 5er? - rick 16:26:20 03/07/03 (0)
• Water in the Passenger rear floorboard... - Scott 20:45:56 03/06/03 (6)
  • same happened to me - Jeff F 21:52:25 03/06/03 (1)
    • Re: water in rear footwell - Allan A. 14:01:01 03/07/03 (0)
  • Sunroof - Mike W. 20:59:38 03/06/03 (3)
    • Maybe, but... - Tulsa Dave 21:29:00 03/06/03 (2)
      • another sunroof cause - Peter Florance 21:37:36 03/06/03 (1)
        • Thanks Gents....But I think Jeff is right.. - Scott 22:23:41 03/06/03 (0)
• Need 6-into-1 Manifold - Chris 20:03:26 03/06/03 (1)
  • Re: Need 6-into-1 Manifold - rick 21:57:05 03/06/03 (0)
• Need 6-into-1 Manifold - Chris 20:03:21 03/06/03 (0)
• Spoiler/ Lafley - T.Han 16:34:03 03/06/03 (1)
  • They no longer sell it - Dan Lafley 20:17:12 03/06/03 (0)
• Windshield gasket replacement - Jeff C 14:17:14 03/06/03 (1)
  • Re: Windshield gasket replacement - Wietse 15:44:21 03/06/03 (0)
• Behr heater blower fixes/substitutions? - rexmo 14:01:38 03/06/03 (4)
  • Re: Behr heater blower fixes/substitutions? - Troy Rudolph 15:31:49 03/06/03 (2)
    • Wow, I spent a lot of time at that page... - ChuckNC 16:38:09 03/06/03 (1)
      • I'm going to add it to our "links" page. (eom) - Troy Rudolph 19:40:56 03/06/03 (0)
  • Re: Behr heater blower fixes/substitutions? - Peter Florance 14:18:47 03/06/03 (0)
• What's this? - Luke 12:33:24 03/06/03 (1)
  • Microfiche parts catalog... - Tulsa Dave 13:17:40 03/06/03 (0)
• BBS/Mahle 14x7 wheels wanted - Eric 12:12:26 03/06/03 (1)
  • Set of 4 gold BBS (NOT Mahle!) 14" X 6.5", more... - Jeff Olson 13:19:13 03/06/03 (0)
• OT : 1981 F1 Champion BMW Scale Model 1 :20 - Derek 11:50:18 03/06/03 (1)
  • Re: OT : 1981 F1 Champion BMW Scale Model 1 :20 - Will Ollison 00:05:36 03/07/03 (0)
• 528i Head on a 3.0 block ??? - Niklas Edlund (Sweden) 10:45:02 03/06/03 (8)
  • Re: 528i Head on a 3.0 block ??? - Troy Rudolph 11:34:35 03/06/03 (7)
    • Are there differences on the 3.0 and 528i heads ?? - Niklas Edlund (Sweden) 01:14:22 03/07/03 (6)
      • no, but .... - Peter Florance 03:09:35 03/07/03 (5)
        • Things are lightening up ! - Niklas Edlund 05:21:20 03/07/03 (4)
          • Re: Things are lightening up ! - Peter Florance 06:58:01 03/07/03 (3)