Please visit our home page for FAQs and other information.

First Fives Bulletin Board Archive XLI

(2004/10/23 - 2004/12/18)

This board is inactive. It is for archival purposes only. Please visit the active board at FirstFives.org.

---

[ First Fives Home ] [ Board Archives ]

• Powertrain differences Euro vs US 733i? w/5spd? - texastim 10:12:40 12/18/04 (0)
• Radio wiring - Craig in Davis 10:06:04 12/18/04 (0)
• Selling two cars: 1988 M5 and 1983 645csi - Scottie Sharpe 09:08:54 12/18/04 (1)
  • Anybody want to loan me $5K? - Nick in Co Springs 14:35:12 12/18/04 (0)
• My E12 528i Topasbraun - Scott in Melb 04:12:52 12/18/04 (2)
  • Re: My E12 528i Topasbraun - Jon IN 11:29:39 12/18/04 (0)
  • Re: My E12 528i Topasbraun - Allert 05:35:10 12/18/04 (0)
• Carbon Fibre Hood - Scott Atl 20:57:41 12/17/04 (3)
  • Re: Carbon Fibre Hood - James Hineline 23:01:22 12/17/04 (1)
    • I too am intrigued - stewart in slc 23:02:08 12/17/04 (0)
  • have you checked your email recently? (nt) - Robert Bondi 21:17:46 12/17/04 (0)
• e12 seats & e28 seats?? - Eric J Miller 18:55:57 12/17/04 (2)
  • Have had 80 and 81 with e28 seats... bolt in. - Lars Olbimmerguy 19:56:50 12/17/04 (1)
    • my 79 has the hump off the tunnel nt - stewart in slc 23:01:24 12/17/04 (0)
• Passenger side mirror question - Craig in Davis 18:07:41 12/17/04 (2)
  • Normally yes, and door panel removal not needed. - BavarianRescue 07:47:17 12/18/04 (1)
    • sent email eom - Craig in Davis 10:06:47 12/18/04 (0)
• Two of the First Fives badges on ebay... - Tulsa Dave 09:19:20 12/17/04 (9)
  • Hey Guys...I am the one selling the badges >>> - Leonard in Richmond 17:20:50 12/17/04 (3)
    • So what do you think you can't get for it ?? - oilslick 19:41:08 12/17/04 (1)
      • Whver the mrkt will bear.shld be interesting (eom) - Leonard 21:50:34 12/17/04 (0)
    • Nice car...looks like a keeper to me eom - Craig in Davis 18:01:41 12/17/04 (0)
  • Anyone want to share? - Velocewest 10:00:48 12/17/04 (2)
    • Tony... I have two sitting on my desk at work - Frank H 11:29:32 12/17/04 (1)
      • I would be interested in one... - Bill Hynes 17:35:55 12/17/04 (0)
  • Re: Two of the First Fives badges on ebay... - Bill Hynes 10:00:41 12/17/04 (1)
    • $20/each for 1st order, two years later, $25 (nt) - Adam Wilson in Chicago 10:05:54 12/17/04 (0)
• used heater core opinion/advice - eric in denver 18:44:56 12/16/04 (4)
  • Re-Core??? We have discussed re-core many - Lars Olbimmerguy 20:20:16 12/16/04 (3)
    • They can be re-cored... - Tulsa Dave 04:33:27 12/17/04 (2)
      • the plastic part is broke - eric in denver 19:10:32 12/17/04 (1)
        • Re: the plastic part is broke - Mike W. 19:42:39 12/17/04 (0)
• lock removal - stewart in slc 14:53:08 12/16/04 (3)
  • Re: lock removal - Peter Florance 05:01:06 12/17/04 (0)
  • Not sure but... - Michael R from Melbourne 22:39:23 12/16/04 (1)
    • Yep, a U shaped clip - Mike W. 22:59:30 12/16/04 (0)
• Thermo Valve. . .? what does it do. . - Jaime Obando 12:07:38 12/16/04 (4)
  • Re: Thermo Valve. . .? what does it do. . - Lenny D. 19:19:12 12/16/04 (0)
  • My Car starts much better without the Thermo Valve - Andres Moreno 15:23:59 12/16/04 (0)
  • Re: Thermo Valve. . .? what does it do. . - Mike W. 13:11:07 12/16/04 (0)
  • U talking about the one at the Thermostat Housing? - Neck Smith 12:10:42 12/16/04 (0)
• Trying Pic Posting again - Jon 10:06:39 12/16/04 (4)
  • Nice aerial . . . beautiful car - Jeff (Atlanta) 17:53:08 12/16/04 (0)
  • You shoot, you score! Love da Schwarz (nt) - Velocewest 11:43:01 12/16/04 (0)
  • Re: Trying Pic Posting again - Jon 10:09:15 12/16/04 (0)
  • Re: Trying Pic Posting again - Jon 10:08:02 12/16/04 (0)
• Outed - Velocewest 09:44:43 12/16/04 (4)
  • Re: Outed - ChuckNC 14:59:41 12/16/04 (2)
    • Re: Outed - Velocewest 15:56:28 12/16/04 (1)
      • Hi Tony. - ChuckNC 21:08:15 12/16/04 (0)
  • holy crap, you bought it!? Congrats! - Adam Wilson in Chicago 09:47:18 12/16/04 (0)
• Troy, S38...did you really? - Rick 05:55:38 12/16/04 (6)
  • No, I wish ... - Troy Rudolph 15:50:36 12/16/04 (1)
    • Here's a link to the original info ... - Troy Rudolph 15:52:41 12/16/04 (0)
  • Zolka from Sweden DID IT!!! - Eddie in TO 07:15:07 12/16/04 (1)
    • Re: Zolka from Sweden DID IT!!! - - link - Eddie in TO 07:16:06 12/16/04 (0)
  • ya, who's is it? what brake booster fits? - Justin in C'ville 06:03:33 12/16/04 (1)
    • Justin, you have an email address?? (nt) - Adam Wilson in Chicago 12:29:07 12/16/04 (0)
• E24 recaro - Tim from Aus 23:40:49 12/15/04 (6)
  • I asked same question - NO was answer - Brian in Calgary 11:20:42 12/16/04 (3)
    • Re: I asked same question - NO was answer - Tim from Aus 13:54:44 12/16/04 (1)
      • yes...for us I think - eric in denver 18:32:36 12/16/04 (0)
    • It would be easy to fab spacers to - Velocewest 11:42:10 12/16/04 (0)
  • Re: E24 recaro - Velocewest 09:33:32 12/16/04 (1)
    • Re: E24 recaro - Tim from Aus 13:48:14 12/16/04 (0)
• 5er Fest 2005: Call for Caravan! - booker535 23:32:19 12/15/04 (0)
• Interior Project! - Dan J 20:40:34 12/15/04 (4)
  • Re: Interior Project! - Tis the season I guess! - Nate in Utah 21:00:24 12/15/04 (3)
    • Yea, off insur. for these winter months to work on - Dan J 21:33:25 12/15/04 (2)
      • e28 interior ? - Michael R from Melbourne 17:04:17 12/16/04 (1)
        • Re: e28 interior ? - DonInVancouverWA 20:06:24 12/16/04 (0)
• Seats on Sept COTM - Don, what did you use? - Nate in Utah 20:39:23 12/15/04 (2)
  • Re: Seats on Sept COTM - Don, what did you use? - Don Daynes 19:19:02 12/16/04 (1)
    • Thanks. - Nate in Utah 10:53:07 12/18/04 (0)
• Aussie BMW prices guide - gary in West Oz 20:37:39 12/15/04 (2)
  • Re: Aussie BMW prices guide - Damien in Sydney 13:06:48 12/16/04 (0)
  • Re: Aussie BMW prices guide - Mark 05:29:00 12/16/04 (0)
• Webmaster...Are you in? - Rick 19:53:17 12/15/04 (10)
  • You would need a webcrawler for that - F.E. 15:13:17 12/16/04 (0)
  • OpenSource to the rescue... - Mike E 02:02:35 12/16/04 (0)
  • At least a couple of ways, but... - Mike W. 22:44:06 12/15/04 (0)
  • Or, ... - Troy Rudolph (Webmaster) 20:44:20 12/15/04 (1)
    • Re: Or, ... - Rick 05:53:29 12/16/04 (0)
  • It might be ... - Troy Rudolph 20:36:32 12/15/04 (4)
    • Re: It might be ... - Mike 21:04:13 12/15/04 (3)
      • Re: It might be ... - Damien in Sydney 13:51:27 12/17/04 (0)
      • That's why I want a volunteer who has it. (eom) - Troy Rudolph 15:55:59 12/16/04 (1)
        • No, no I ment it costs $ per use.... - Mike 20:03:05 12/16/04 (0)
• Update RE: Ok done with it - Martin in Pdx 19:33:46 12/15/04 (2)
  • Re: Update RE: Ok done with it - Velocewest 20:08:31 12/15/04 (0)
  • Re: Update RE: Ok done with it - Peter Florance 19:38:51 12/15/04 (0)
• Engine No. info - chris|melb 14:59:43 12/15/04 (3)
  • Re: Engine No. info - s/b same thing. Engine carries VIN of car it 21:43:38 12/15/04 (2)
    • Not always ... - Troy Rudolph 15:54:51 12/16/04 (1)
      • but can i get info on the engine??? - chris|melb 20:38:44 12/16/04 (0)
• Brake Sensors - Dan Lafley 10:41:35 12/15/04 (0)
• Hey Wietse.... - Mike 04:07:43 12/15/04 (2)
  • Wietse here.... - Wietse 23:32:35 12/15/04 (1)
    • Re: Wietse here.... - Mike 04:14:01 12/16/04 (0)
• Spazzing Flashers!! - Dan J 20:52:52 12/14/04 (1)
  • Re: Spazzing Flashers!! - Velocewest 21:02:31 12/14/04 (0)
• Dave or Gary in Tulsa - Karl in KS 19:21:55 12/14/04 (1)
  • As always, it's hard to plan that far out... - Tulsa Dave 06:48:10 12/15/04 (0)
• help with heater core....NTB - eric in denver 18:04:59 12/14/04 (3)
  • Check Maximillian. Also.. - Misha 14:15:19 12/15/04 (0)
  • Re: help with heater core....NTB - Peter Florance 19:19:26 12/14/04 (1)
    • thanks you....more - eric in denver 19:56:51 12/14/04 (0)
• Thanks for the Em Flasher Switch info - Jon 16:52:02 12/14/04 (0)
• WTB: working fog light switch - Bruce in Seattle 16:01:04 12/14/04 (1)
  • Bruce.....you have mail - BavarianRescue 06:51:03 12/15/04 (0)
• Part # for 2002 shifter? - Jeff Olson 15:55:06 12/14/04 (12)
  • shifter pics - 2002sue 22:08:01 12/14/04 (3)
    • is there a limit - Peter Florance 03:44:29 12/15/04 (2)
      • The Z3-type shifter WON'T work because... - Jeff Olson 07:02:13 12/15/04 (1)
        • The Z3 type will work (m) - Justin in C'ville 08:17:44 12/15/04 (0)
  • Re: Part # for 2002 shifter? - Velocewest 21:00:38 12/14/04 (0)
  • Re: Part # for 2002 shifter? - Troy Rudolph 20:09:18 12/14/04 (0)
  • I think the 320i shifter gives shorter throw - Velocewest 16:27:24 12/14/04 (5)
    • Thanks! Have you used in E12? - Jeff Olson 18:06:39 12/14/04 (4)
      • I had to have the bushing hole on the - Jeff (Atlanta) 20:13:56 12/14/04 (1)
        • The 320i shifter is an improvement over stock... - Tulsa Dave 06:32:54 12/15/04 (0)
      • Re: Thanks! Have you used in E12? - Velocewest 19:11:43 12/14/04 (1)
        • Sorry, incomplete thought - Velocewest 19:13:52 12/14/04 (0)
• Posting pictures of my car - Jon 11:00:26 12/14/04 (8)
  • Here's links to pic of my car - Jon 14:04:23 12/14/04 (7)
    • Re: Here's links to pic of my car - Jon 14:05:39 12/14/04 (6)
      • Re: Here's links to pic of my car - Jon 14:06:35 12/14/04 (5)
        • Re: Here's links to pic of my car - Jon 14:07:24 12/14/04 (4)
          • Links didnt work - Michael R from Melbourne 17:22:17 12/14/04 (3)
            • Re: Links didnt work - Jon 23:41:59 12/14/04 (0)
            • Jon, send'em to me offline - Adam Wilson in Chicago 19:37:26 12/14/04 (1)
              • Re: Jon, send'em to me offline - Jon 08:03:07 12/15/04 (0)
• Priced a bit high... but - Mike E 02:15:09 12/14/04 (16)
  • I'm on the plane tonight! - Michael R from Melbourne 17:28:38 12/14/04 (15)
    • Re: I'm on the plane tonight! - Jon 11:50:25 12/15/04 (14)
      • That's why advised this system for Michaels car - Mike E 02:21:21 12/16/04 (11)
        • Re: That's why advised this system for Michaels car - Jon 10:22:50 12/16/04 (10)
          • Re: That's why advised this system for Michaels ca - Mike E 14:05:31 12/16/04 (3)
            • Re: That's why advised this system for Michaels ca - Jon 17:31:17 12/16/04 (1)
              • 4" deep, eh? - Mike E 19:49:58 12/16/04 (0)
            • probably 6db/octave - Peter Florance 14:15:34 12/16/04 (0)
          • crest 10000? (WOB) - Peter Florance 13:41:43 12/16/04 (5)
            • Re: crest 10000? (WOB) - Jon 15:22:26 12/16/04 (4)
              • which 2500? (way OT, sorry) - Peter Florance 17:14:37 12/16/04 (3)
                • Re: which 2500? (way OT, sorry) - Jon 17:51:48 12/16/04 (2)
                  • Re: which 2500? (way OT, sorry) - Peter Florance 19:21:31 12/16/04 (1)
                    • Re: which 2500? (way OT, sorry) - Jon 20:41:24 12/16/04 (0)
      • Hey Jon - Peter Florance 17:48:56 12/15/04 (1)
        • Re: Hey Jon - Jon 10:42:52 12/16/04 (0)
• Temp Sensor for ECU? - Jon 00:01:01 12/14/04 (3)
  • Re: Temp Sensor for ECU? - Mike W. 18:41:17 12/14/04 (1)
    • Re: Temp Sensor for ECU? - Jon 11:58:59 12/15/04 (0)
  • .... - Jon 11:03:27 12/14/04 (0)
• Hardy & Beck wheel update - Velocewest 21:09:11 12/13/04 (0)
• Thank you Peter Florance for the call today..(m) - Brian in TN. 5er Fest '05 co-coordinator 20:33:03 12/13/04 (0)
• two things, approximate weight euro E12 & S38? - Justin in C'ville 20:27:20 12/13/04 (1)
  • You mean like this one ? - Troy Rudolph 20:24:06 12/14/04 (0)
• cold tach reads high - greghill-phx,az 19:55:05 12/13/04 (0)
• valve cover - bolts or studs - Peter Florance 19:32:46 12/13/04 (2)
  • you can do it if you find the right studs - Sam Schultz 19:37:35 12/13/04 (1)
    • Re: you can do it if you find the right studs - Bert-Ola 00:41:27 12/14/04 (0)
• Black rocker cover - Michael R from Melbourne 18:58:24 12/13/04 (1)
  • Most attractive! (nt) - Velocewest 09:15:57 12/15/04 (0)
• Whiteface Gauges complete! - Dan J 18:19:19 12/13/04 (2)
  • Email Left! - Scott ATL 06:42:10 12/14/04 (1)
    • Re: Email Left! - darius 18:35:02 12/15/04 (0)
• Light green / fawn '80 528iA 4 sale in Melbourne - Michael R from Melbourne 18:01:15 12/13/04 (0)
• papajimmm....i found your owners' manual - chrystobal 17:54:50 12/13/04 (1)
  • car or radio - papajimmm nh 81 528i 18:43:40 12/13/04 (0)
• Alternator problem?? - Dan J 17:42:26 12/13/04 (8)
  • NEWS! - Dan J 20:40:56 12/14/04 (2)
    • The light MUST come on to charge - Peter Florance 03:48:43 12/15/04 (0)
    • Re: NEWS! - Velocewest 21:08:13 12/14/04 (0)
  • Re: Alternator problem?? - Velocewest 18:26:08 12/13/04 (1)
    • Re: Alternator problem?? - greghill-phx,az 19:27:53 12/13/04 (0)
  • What blue wire? - Dan J 17:49:55 12/13/04 (2)
    • Re: What blue wire? - Dan J 18:16:24 12/13/04 (1)
      • Re: What blue wire? - greghill-phx,az 19:31:09 12/13/04 (0)
• Vasloine on CV Boots? - Jerry Baldwin in Vermont 16:01:53 12/13/04 (6)
  • I use Rubber Grease - Mike E 04:15:16 12/14/04 (0)
  • Just use Armor All or similar - Velocewest 17:34:25 12/13/04 (3)
    • never use armor all for anything you hope to keep> - chrystobal 17:51:04 12/13/04 (2)
      • Armor All has met my needs for 20+ years (nt) - Velocewest 18:27:17 12/13/04 (1)
        • try 303 - greghill-phx,az 19:38:29 12/13/04 (0)
  • Re: Vasloine on CV Boots? - Paul 16:06:50 12/13/04 (0)
• Hardy Beck update, for those interested - Paul 15:56:47 12/13/04 (2)
  • Kind of a shame - Velocewest 21:11:29 12/14/04 (0)
  • Re: Hardy Beck update, for those interested - paul 16:00:33 12/13/04 (0)
• Fuel Filter & Pump Set-up - Customized :) - Nate in Utah 15:37:51 12/13/04 (0)
• Windscreen Wiper problem - chris|melb 15:31:41 12/13/04 (2)
  • Ahhh... - Mike E 15:42:40 12/13/04 (1)
    • Must be raining here today. - Michael R from Melbourne 17:53:42 12/13/04 (0)
• Several cold idle questions. - Jon 15:28:37 12/13/04 (0)
• SeaTac area 530i FS - Velocewest 13:32:27 12/13/04 (0)
• Vacuum advance needed for '77- 530i - Gary in Tulsa 13:16:04 12/13/04 (1)
  • Re: Vacuum advance needed for '77- 530i - Karl in KS 19:05:05 12/14/04 (0)
• Suspension Parts Source - Dan Lafley 10:16:44 12/13/04 (0)
• I finally found a set of campys for my E12. - Frank H 19:04:22 12/12/04 (10)
  • NICE! Tulio would be happy! - Scott ATL 15:03:08 12/13/04 (3)
    • Yes... I agree Tulio would be happy seeing these - Frank 06:18:29 12/14/04 (2)
      • Frank, Frank, Frank.... - Scott ATL 06:38:26 12/14/04 (1)
        • Oops, here is my email.... - Scott ATL 06:40:29 12/14/04 (0)
  • Re: I like em - Matt D UK 07:04:44 12/13/04 (0)
  • Sounds like a bargain - Mike W. 21:23:13 12/12/04 (0)
  • I had no idea Campy made automobile wheels - Craig in Davis 20:13:26 12/12/04 (2)
    • I believe Campy has made auto wheels since 1966 - Frank H 06:11:29 12/14/04 (1)
      • Dont forget about Pantera.... - Scott ATL 06:30:00 12/14/04 (0)
  • In a world obsessed with spokes, webs, and the - Lars Olbimmerguy 19:47:24 12/12/04 (0)
• woodtrim refinsh II FAQ posted - Peter Florance - First Fives Dictator for Life 15:45:22 12/12/04 (0)
• Windshield Rust Repair FAQ posted - Peter Florance - First Fives Dictator for Life 15:37:41 12/12/04 (0)
• Melbourne First Fives gathering - Michael R from Melbourne 14:47:43 12/12/04 (3)
  • it's not a bbs spoiler with a 528 bolted to it... - chris|melb 14:34:15 12/15/04 (0)
  • Re: Melbourne First Fives gathering - Scott in Melb 14:00:44 12/13/04 (0)
  • Not to mention that B10... - Mike E 18:43:27 12/12/04 (0)
• L-Jetronics intake manifold details... - Pat Hines 12:12:43 12/12/04 (5)
  • Sort of - Mike W. 12:42:05 12/12/04 (4)
    • I have an e28 for comparison and a 2nd projec - Pat Hines 21:14:00 12/14/04 (0)
    • well.... - Peter Florance 14:32:03 12/12/04 (2)
      • You must be using part of the L-jet to run things. - Pat Hines 21:23:04 12/14/04 (1)
        • part of my goal - Peter Florance 04:11:07 12/15/04 (0)
• Bilstein - GSS 10:26:56 12/12/04 (2)
  • E12 Bilstein Info., part #'s, springs, more... - Jeff Olson 16:59:48 12/12/04 (0)
  • There's a set of ST springs in the classifieds - Velocewest 10:43:39 12/12/04 (0)
• Access bulletin board through NNTP reader > ? - Jon 23:00:59 12/11/04 (2)
  • Good idea, but it isn't available. Sorry. (eom) - Troy Rudolph (Webmaster) 08:10:30 12/12/04 (1)
    • Re: Good idea, but it isn't available. Sorry. (eom) - Jon 12:07:53 12/12/04 (0)
• latest rebuild pictures - Adam Wilson in Chicago 20:30:14 12/11/04 (4)
  • nice to see the progress...keep it coming. nt - eric in denver 09:31:08 12/12/04 (0)
  • Re: latest rebuild pictures - Rick 04:58:12 12/12/04 (0)
  • looks pretty sharp (nt) - Robert Bondi 02:01:12 12/12/04 (0)
  • A thing of beauty - Mike W. 21:39:00 12/11/04 (0)
• Here's the dream. Someone go for it! - Troy Rudolph 19:41:41 12/11/04 (4)
  • Re: Here's the dream. Someone go for it! - Chris Hollis 05:04:33 12/12/04 (1)
    • Your're right.... - Troy Rudolph 08:12:02 12/12/04 (0)
  • no reserve but reserve not met - papajimmm mh 81 528i 20:28:45 12/11/04 (0)
  • Who wants a stinking V8 in a BMW>> - Mike W. 20:01:09 12/11/04 (0)
• Mysterious flasher problem - Jon 19:35:08 12/11/04 (9)
  • Temp fix until you get new hazard switch - Remy Davison 04:17:02 12/12/04 (1)
    • Re: Temp fix until you get new hazard switch - Jon 10:52:38 12/12/04 (0)
  • This happened to me - Mike E 22:14:54 12/11/04 (1)
    • Must be something in the air.... - Damien in Sydney 22:48:37 12/12/04 (0)
  • Solution - Mike W. 21:48:12 12/11/04 (3)
    • Re: Solution - Karl in KS 18:48:10 12/12/04 (0)
    • I did the same repair MikeW mentions>> - Craig in Davis 08:26:51 12/12/04 (0)
    • Re: Solution - Jon 22:23:56 12/11/04 (0)
  • Re: Mysterious flasher problem - Jon 19:47:21 12/11/04 (0)
• Hardy and Beck wheel - Velocewest 19:33:39 12/11/04 (2)
  • Other options - Wietse 07:05:52 12/12/04 (1)
    • Re: Other options - Velocewest 10:40:02 12/12/04 (0)
• Leak into Trunk and passenger footwell - Steve G 11:06:57 12/11/04 (16)
  • Re: Leak into Trunk and passenger footwell - Allan A. 04:55:36 12/13/04 (1)
    • Re: Leak into Trunk and passenger footwell - Steve G 09:32:39 12/13/04 (0)
  • maybe an idea to find it... - Eric in Denver 00:11:28 12/13/04 (1)
    • Re: maybe an idea to find it... - Steve 09:34:01 12/13/04 (0)
  • Mine leaks through front windshield - Mike E 22:19:38 12/11/04 (2)
    • Re: Mine leaks through front windshield - Steve G 21:29:02 12/12/04 (1)
      • Re: Mine leaks through front windshield - Jon 19:27:55 12/13/04 (0)
  • $100 ????? I think I paid $15 - $25 and, , , - Jeff (Atlanta) 22:10:34 12/11/04 (0)
  • Vaseline on the gasket will help make >>> - Craig in Davis 11:24:55 12/11/04 (7)
    • Re: Vaseline on the gasket will help make >>> - Steve G 12:51:07 12/11/04 (6)
      • Don't use Vasoline! It is petroleum based and will - BavarianRescue 08:00:57 12/12/04 (0)
      • Is it possible you have rust holes >> - Craig in Davis 14:57:48 12/11/04 (4)
        • Rust holes... - Jeff C 19:13:34 12/11/04 (0)
        • use silicone not vasiline! - Matt C 16:48:20 12/11/04 (2)
          • Re: use silicone not vasiline! - Steve G 21:30:18 12/12/04 (0)
          • Sorry about the bad advice>> - Craig in Davis 07:17:53 12/12/04 (0)
• Sunroof adjustment - Craig in Davis 07:19:46 12/11/04 (8)
  • Re: Sunroof adjustment - Mike W. 11:33:55 12/11/04 (2)
    • Re: Sunroof adjustment, Thanks Mike, >> - Craig in Davis 11:54:48 12/11/04 (1)
      • That took all of 2 minutes. Thanks again eom - Craig in Davis 12:08:20 12/11/04 (0)
  • Speaking of Sunroofs, Anybody do a Glass sunroof? - Nick in Co Springs 08:48:35 12/11/04 (4)
    • SAAB is where the e28 guys get glass roofs - Velocewest 12:36:21 12/11/04 (3)
      • If anyone has the details, please post them. - Troy Rudolph 15:32:50 12/11/04 (2)
        • Also the subject of numerous posts on roadfly - Lars Olbimmerguy 19:48:45 12/11/04 (0)
        • Look on mye28.com, they have the details (nt) - Velocewest 17:24:25 12/11/04 (0)
• Temp guage and seatbelt light>> - Craig in Davis 07:14:55 12/11/04 (1)
  • IIRC the "overheat" light would refer to - Velocewest 17:26:10 12/11/04 (0)
• buy my german hot rod,,,,,,SHIZER!!!!1 - Andy 01:39:05 12/11/04 (2)
  • Re: buy my german hot rod,,,,,,SHIZER!!!!1 - DREW,,, 01:50:45 12/11/04 (1)
    • Man...Are you, like, a COP or something? Dude... - jeffreyolson@adelphia.net 13:44:15 12/11/04 (0)
• Car idles very low (300RPM) in 1st minute warm-up - Tomas Tupy 00:41:50 12/11/04 (4)
  • Sounds like your aux air valve >> - Bob/E12/6er 14:24:01 12/13/04 (0)
  • Make sure the dipstick is all the way in! - Matt C 03:47:08 12/11/04 (0)
  • Re: Car idles very low (300RPM) in 1st minute warm-up - drizzo 01:35:56 12/11/04 (1)
    • Re: Car idles very low (300RPM) in 1st minute warm - M Keehn 12:06:20 12/14/04 (0)
• Parting out 80 528i - Phil In Poulsbo 20:29:48 12/10/04 (3)
  • Do you have a working fog lamp switch? - Bruce in Seattle 09:23:49 12/13/04 (2)
    • Re: Do you have a working fog lamp switch? - Joe Hood 01:58:00 12/14/04 (1)
      • Re: Do you have a working fog lamp switch? - Ernie Babin 11:40:30 12/14/04 (0)
• HUGE P.I.T.A....NTB heater box - eric in denver 19:18:39 12/10/04 (2)
  • I might have one... - Mike W. 23:09:12 12/10/04 (1)
    • i have two already out - ...tom 06:57:42 12/11/04 (0)
• A couple suspension questions.... - Dan Lafley 16:39:44 12/10/04 (3)
  • Re: A couple suspension questions.... - Chris Hollis 19:38:13 12/10/04 (1)
    • I agree - Mike E 03:01:24 12/12/04 (0)
  • Those look like they could stand replacing, ... - Tulsa Dave 19:18:41 12/10/04 (0)
• 80 528i official DMV registration completed - Craig in Davis 16:17:00 12/10/04 (1)
  • Ah Yes... The Prime Law Of Mechanical - Lars Olbimmerguy 16:43:16 12/10/04 (0)
• anyone interested in decent body in Delaware? - ...tom 13:23:04 12/10/04 (0)
• paging Wietse - ...tom 13:17:45 12/10/04 (1)
  • Sorry ... - Wietse 08:51:13 12/11/04 (0)
• Rear window gasket and trim pieces... - Lenny D. 12:56:56 12/10/04 (0)
• Going to sell my '81 528i - Eric Q 12:43:53 12/10/04 (0)
• dist most likely - Peter Florance 10:10:06 12/10/04 (2)
  • Re: dist most likely - Velocewest 10:54:36 12/10/04 (0)
  • sorry should have been follow-up to post below - Peter Florance 10:10:38 12/10/04 (0)
• Give us advice on Martin in PDX's '78 (long) - Velocewest 09:49:09 12/10/04 (1)
  • Re: Give us advice on Martin in PDX's '78 (long) - Martin in Pdx 19:31:15 12/15/04 (0)
• FUSES: '77 530i - John 08:15:31 12/10/04 (2)
  • A stiff toothbrush? - Matt D UK 09:38:54 12/10/04 (0)
  • Re: FUSES: '77 530i - Lenny D. 09:38:18 12/10/04 (0)
• HELP! Car won't start '80 528i - Ed G 20:17:07 12/09/04 (9)
  • Plug wires is another thing to check - Bruce in Seattle 13:17:46 12/10/04 (0)
  • Re: HELP! Car won't start '80 528i - Lenny D. 09:36:37 12/10/04 (0)
  • I'm betting with Al on the Earths.... - Lars OBG 21:33:47 12/09/04 (3)
    • True Al... But said that's what we call them, not - Lars OBG 07:43:39 12/10/04 (1)
      • so, is the positive part of the circuit called... - ChuckNC 12:14:41 12/10/04 (0)
    • So is it planet earth or planet ground??? - Al from Oz 21:37:36 12/09/04 (0)
  • Re: HELP! Car won't start '80 528i - Al from Oz 20:42:19 12/09/04 (2)
    • AL, You nailed it!! - Ed G 17:19:17 12/10/04 (0)
    • Thanks guys - Ed G 04:49:23 12/10/04 (0)
• Gentlemen, I think we have an asking price record. - Al from Oz 17:28:24 12/09/04 (6)
  • Saw a new Ford GT in dealer, "entertaining offers - Greg J 09:36:45 12/10/04 (0)
  • Re: Gentlemen, I think we have an asking price record. - F.E. 18:25:50 12/09/04 (2)
    • They are classics! nt - Damien in Sydney 10:58:39 12/10/04 (1)
      • Re: They are classics! and should go up in price - Michael R from Melbourne 14:15:43 12/10/04 (0)
  • 75 530I with lousy paint, 232K miles: $13,000 Firm - Misha 18:13:01 12/09/04 (0)
  • LOL .. -nt - Art in CA 17:44:10 12/09/04 (0)
• Strange vibration sound on accelerate - MattP Melb 16:16:43 12/09/04 (3)
  • found it - mattp 17:59:42 12/12/04 (0)
  • Re: Strange vibration sound on accelerate - brian in nevada 19:45:25 12/10/04 (0)
  • Check your Guibo... - Scott ATL 22:30:50 12/09/04 (0)
• Cappilary thermostats - Matt D UK 15:35:43 12/09/04 (9)
  • Re: Cappilary thermostats - Velocewest 16:36:16 12/10/04 (0)
  • Been giving this lots of thought... - Tulsa Dave 21:02:30 12/09/04 (6)
    • Re: Been giving this lots of thought... - Matt D UK 06:15:05 12/10/04 (5)
      • Have you switched to the E28 thermostat housing? - Tulsa Dave 07:29:43 12/10/04 (4)
        • my car... - Karl in KS 04:37:06 12/11/04 (0)
        • Re: soldering - Matt D UK 10:02:29 12/10/04 (2)
          • Electric fans. (long) - Michael R from Melbourne 14:52:58 12/10/04 (1)
            • Re: Electric fans. (without engine driven fan) - Walt Barie 08:32:49 12/12/04 (0)
  • Re: Capillary thermostats - Troy Rudolph 17:28:50 12/09/04 (0)
• Who's got a sideloader LSD to sell? More... - Jeff Olson 15:00:10 12/09/04 (4)
  • Try this guy, recently bought a 3.64 LSD >> - Bob/E12/6er 08:36:28 12/10/04 (0)
  • I'm passing the torch - Peter Florance 07:48:08 12/10/04 (0)
  • Re: Who's got a sideloader LSD to sell? More... - Chris Hollis 15:24:35 12/09/04 (1)
    • I only want one small part, NOT another car! - Jeff Olson 21:01:47 12/09/04 (0)
• Paging Don and Eric - Jim Hineline 13:58:34 12/09/04 (0)
• ? for Peter - Leonard in Richmond 08:20:50 12/09/04 (4)
  • Good looking front spoiler Leonard - Michael R from Melbourne 14:10:10 12/09/04 (1)
    • Re: Good looking front spoiler Leonard - Leonard in Richmond 16:12:10 12/17/04 (0)
  • Re: ? for Peter - Peter Florance 10:02:20 12/09/04 (0)
  • oops! here's the pic - Leonard in Richmond 08:24:19 12/09/04 (0)
• Looking for feedback on starting BMW magazine - Jon in Richmond 08:06:41 12/09/04 (12)
  • ya stole my idea! ..and name!! :)) - Art in CA 23:12:18 12/12/04 (0)
  • Agree that key is advertisers - Greg J 09:43:44 12/10/04 (0)
  • Re: Looking for feedback on starting BMW magazine - Mike 06:54:03 12/10/04 (0)
  • Re: Looking for feedback on starting BMW magazine - Eddie in TO 06:03:01 12/10/04 (0)
  • Re: Looking for feedback on starting BMW magazine - Jim 19:41:52 12/09/04 (0)
  • Excellent Idea! - F.E. 18:30:43 12/09/04 (0)
  • I like it! - Dan J 15:02:25 12/09/04 (0)
  • Awesome! - Bill Hynes 15:01:13 12/09/04 (0)
  • Great concept. - Al from Oz 14:12:37 12/09/04 (0)
  • Re: Looking for feedback on starting BMW magazine - Jim Hineline 13:53:03 12/09/04 (0)
  • excellent, some questions and comments (LONG) - Adam Wilson in Chicago 08:22:53 12/09/04 (0)
  • Re: Looking for feedback on starting BMW magazine - Scott ATL 08:17:06 12/09/04 (0)
• FS Sears Timing Light - Peter Florance 04:29:55 12/09/04 (1)
  • email - Peter Florance 04:30:44 12/09/04 (0)
• my 528 is for sale on ebay... - joshua caine 22:28:50 12/08/04 (0)
• turbo - Brian 18:34:30 12/08/04 (3)
  • Re: turbo - peter mooney 12:54:59 12/09/04 (0)
  • M109 ?? - John in Simi Valley 21:26:59 12/08/04 (1)
    • Re: M109 ?? - Mark 00:18:08 12/09/04 (0)
• OT: Good Source For posting pics.... - Dan Lafley 16:39:40 12/08/04 (6)
  • Use Photobucket.com - John in NH 07:26:50 12/12/04 (4)
    • Just testing Photobucket.com - pls ignore - Michael R from Melbourne 14:49:31 12/13/04 (3)
      • Re: Just testing Photobucket.com - pls ignore - Michael R from Melbourne 15:03:42 12/13/04 (2)
        • Re: Just testing Photobucket.com - pls ignore - Michael R from Melbourne 15:04:38 12/13/04 (1)
          • Re: Just testing Photobucket.com - pls ignore - Michael R from Melbourne 15:11:04 12/13/04 (0)
  • I use Car Domain - Bill Hynes 16:42:07 12/08/04 (0)
• 79 528i choke problems - Jon 16:38:38 12/08/04 (2)
  • audx air valve - Peter Florance 04:27:10 12/09/04 (1)
    • Re: audx air valve - Jon 20:15:52 12/09/04 (0)
• ok done with it... - Martin in Pdx 14:37:29 12/08/04 (7)
  • OK, now I feel bad - Velocewest 16:50:28 12/08/04 (2)
    • Re: OK, now I feel bad - Martin in Pdx 09:46:44 12/09/04 (1)
      • supers are good choice - Peter Florance 11:01:29 12/09/04 (0)
  • Dont give up! - Dan Lafley 14:59:57 12/08/04 (3)
    • Good point on the plugs. I have seen cars with - Lars OBG 15:47:06 12/08/04 (2)
      • hey it's Lars, Arinuts & Pappajim! - Marguerite 20:12:14 12/08/04 (1)
        • Hi Marguerite!!! Happy Holidays to you as well. - Lars OBG 22:14:52 12/08/04 (0)
• auto trans question - Chris Hollis 08:17:46 12/08/04 (2)
  • Concerning that transmission pan seal , , , - Jeff (Atlanta) 15:30:31 12/09/04 (0)
  • First WAG... trans fluid needs to be flushed and - Lars OBG 14:57:51 12/08/04 (0)
• Paging Wietse - Peter Florance - First Fives Dictator for Life 07:35:15 12/08/04 (2)
  • Re: Paging Wietse - Wietse 07:44:17 12/08/04 (1)
    • I'm trying to reach you as well - David P 12:35:02 12/08/04 (0)
• Custom Whiteface gauges - Dan J 21:15:28 12/07/04 (5)
  • Try this website!!! - Preston in Spokane 08:53:18 12/09/04 (0)
  • Re: Custom Whiteface gauges - tm 12:21:40 12/08/04 (0)
  • Re: Custom Whiteface gauges - Joel 05:38:41 12/08/04 (1)
    • Sure, I still have 2 more to finish, - Dan J 05:42:06 12/09/04 (0)
  • Re: Custom Whiteface gauges - Mike E 21:24:47 12/07/04 (0)
• latest progress on engine rebuild - Adam Wilson in Chicago 20:51:30 12/07/04 (13)
  • Re: latest progress on engine rebuild - peter mooney 13:02:43 12/09/04 (0)
  • Re: latest progress on engine rebuild - Troy Rudolph 18:14:54 12/08/04 (1)
    • Caution on head studs - peter mooney 13:09:10 12/09/04 (0)
  • I liked the message on the newsprint - KSBinVA 11:17:59 12/08/04 (0)
  • subframe paint? - Peter Florance 05:30:12 12/08/04 (7)
    • Re: subframe paint? - Adam Wilson in Chicago 07:24:21 12/08/04 (6)
      • Re: subframe paint? - Jim 16:01:33 12/08/04 (0)
      • Re: subframe paint? - Chris Hollis 07:28:37 12/08/04 (4)
        • nothing, they weren't repairable - Adam Wilson in Chicago 07:41:23 12/08/04 (3)
          • Re: nothing, they weren't repairable - Chris Hollis 08:13:16 12/08/04 (2)
            • yep, just to the bolt holes, not to the bore - Adam Wilson in Chicago 08:42:05 12/08/04 (1)
              • Solution? - Chris Hollis 12:17:39 12/08/04 (0)
  • looks very nice! (nt) - james 23:52:08 12/07/04 (0)
• cowl cracks - Karl in KS 20:20:26 12/07/04 (2)
  • one word is worth 1/1000th of a picture - Peter Florance 13:15:39 12/08/04 (1)
    • Re: one word is worth 1/1000th of a picture - Karl in KS 03:57:04 12/11/04 (0)
• Paging Lars OBG, pls email (nt) - Velocewest 15:06:26 12/07/04 (0)
• Selling NOS rear fenders - Samir Shah 10:35:08 12/07/04 (0)
• Spring strut - GSS 07:08:58 12/07/04 (6)
  • just stiffer spring and shock, I think (nt) - Velocewest 08:56:42 12/08/04 (5)
    • Re: just stiffer spring and shock, I think (nt) - GSS 13:01:46 12/08/04 (4)
      • do you own an M535i? - Adam Wilson in Chicago 07:49:55 12/09/04 (3)
        • Re: do you own an M535i? - GSS 10:18:34 12/09/04 (2)
          • parts - Adam Wilson in Chicago 11:57:58 12/09/04 (1)
            • Re: parts - GSS 12:44:27 12/09/04 (0)
• Converting a RHD to a LHD? - Vince 05:28:25 12/07/04 (14)
  • just curious... where are you located? - Frank H 17:42:59 12/08/04 (0)
  • Re: Converting a RHD to a LHD? - Remy Davison 05:22:03 12/08/04 (0)
  • Brake boosters - Mike E 21:27:13 12/07/04 (11)
    • Guys, he's going RHD to LHD - Velocewest 11:35:38 12/08/04 (10)
      • Yeah, I got that... - Mike E 18:00:44 12/08/04 (0)
      • wiring under the dash - Michael R from Melbourne 11:45:25 12/08/04 (8)
        • So the basic bodyshell, chassis....... - Vince 15:43:15 12/08/04 (7)
          • I didn't know they did 528's, I thought 525's - Adam Wilson in Chicago 08:08:43 12/09/04 (0)
          • Jeff in ATL to the front please... - Tulsa Dave 05:37:44 12/09/04 (0)
          • Might be an E12 533i - Remy Davison 04:17:57 12/09/04 (1)
            • It WAS Jeff in ATL... - Tulsa Dave 05:31:15 12/09/04 (0)
          • What??? - Ryan Bryan 20:45:35 12/08/04 (2)
            • More info (long) - Vince 12:50:30 12/09/04 (1)
              • So with your resources, - Velocewest 17:10:20 12/09/04 (0)
• Heater valve question - Remy Davison 03:58:54 12/07/04 (3)
  • Re: Heater valve question - Michael R from Melbourne 19:23:34 12/07/04 (0)
  • Re: Heater valve question - Peter Florance 04:02:01 12/07/04 (1)
    • Ah-ha! Thanks Peter. Answered in 15 mins - Remy Davison 04:57:05 12/07/04 (0)
• Free M30 in Oakland, Ca. - Bob in San Jose 23:54:16 12/06/04 (0)
• Parts Car in NYC, anyone want it??? Need Help with - ///ARINUTS... 23:04:51 12/06/04 (1)
  • use it! - ...tom 03:39:01 12/07/04 (0)
• Melbourne Get Together - Mike E 21:43:33 12/06/04 (1)
  • Re: Melbourne Get Together - mattp melb 17:28:19 12/07/04 (0)
• wow, there are FOUR E12's on ebay right now - Adam Wilson in Chicago 20:36:02 12/06/04 (4)
  • $100 admin fee? - chucknc 18:58:18 12/07/04 (0)
  • Re: wow, there are FOUR E12's on ebay right now - Andrew 13:54:27 12/07/04 (1)
    • Aftermarket trim, ala CSL (nt) - Velocewest 15:05:22 12/07/04 (0)
  • Re: wow, there are FOUR E12's on ebay right now - Rick 04:21:47 12/07/04 (0)
• Can't open the trunk - Bruce in Seattle 15:11:09 12/06/04 (8)
  • I've Seen That Before - John in Simi Valley 18:05:21 12/06/04 (2)
    • Oh, Hi Lars! - DOF !! 18:07:39 12/06/04 (1)
      • Yep... consistent, and correct..... >> - Lars Olbimmerguy 19:01:14 12/06/04 (0)
  • I am suspecting since the dealer got it open>>>> - Lars Olbimmerguy.. 15:59:19 12/06/04 (4)
    • Lock is in verticle position...still can't turn it - Bruce in Seattle 13:44:31 12/08/04 (2)
      • Valet Key? - Lou in Denver 15:55:05 12/08/04 (1)
        • I had the dealer make a key... - Bruce in Seattle 17:02:09 12/08/04 (0)
    • Re: I am suspecting since the dealer got it open>>>> - Bruce in Seattle 21:17:57 12/06/04 (0)
• Differential Lifespan - Lou in Denver 10:41:51 12/06/04 (0)
• Brake booster vacuum hose - Sebastian 10:17:03 12/06/04 (4)
  • Two options, either change to a later model intake - Big Dog 11:17:39 12/06/04 (0)
  • Re: Brake booster vacuum hose - Sebastian 10:44:54 12/06/04 (2)
    • Forget the hydraulic booster setup - Michael R from Melbourne 16:49:25 12/06/04 (0)
    • Forget the hydraulic booster setup - Michael R from Melbourne 16:49:00 12/06/04 (0)
• e12 for Sale in Sydney Australia - Michael R from Melbourne 01:21:27 12/06/04 (0)
• Engine idles high at 1900 cold after 320i intakes - Tomas Tupy 23:06:03 12/05/04 (3)
  • Missing bolts would definitely add to it.. - Art in CA 16:48:26 12/06/04 (0)
  • Re: Engine idles high at 1900 cold after 320i intakes - Peter Florance 04:52:49 12/06/04 (0)
  • Re: Engine idles high at 1900 cold after 320i intakes - Hans V. 23:37:01 12/05/04 (0)
• Another question - B Boyce 22:39:15 12/05/04 (2)
  • Euro Bumpers Alone (New) and only from Germany - Lars Olbimmerguy 22:52:46 12/05/04 (1)
    • Where are you... - Mike 05:11:06 12/06/04 (0)
• E12 wheel fit - B Boyce 22:35:36 12/05/04 (8)
  • Hey Brian - - - - John in Simi Valley 18:14:43 12/06/04 (1)
    • Re: Hey Brian - - - - B Boyce 22:53:48 12/06/04 (0)
  • Re: E12 wheel fit - jim@da shop 16:23:44 12/06/04 (1)
    • Jim is right... - Eric Q 21:50:45 12/06/04 (0)
  • Those are probably 7.5x16" or 8x16" et20 - Velocewest 11:21:58 12/06/04 (3)
    • Re: Those are probably 7.5x16" or 8x16" et20 - B Boyce 21:30:54 12/06/04 (2)
      • Because the e12 was designed around - Velocewest 21:35:22 12/06/04 (1)
        • Re: Because the e12 was designed around - BBoyce 23:13:56 12/07/04 (0)
• Car is idling faster with this cold weather? AAV? - Neck Smith 22:05:20 12/05/04 (4)
  • new style AAV does need to be mounted - Velocewest 14:54:50 12/06/04 (0)
  • Re: Car is idling faster with this cold weather? AAV? - Lou in Denver 08:36:30 12/06/04 (0)
  • manualy operated ball valve.. . very dependable!! - Jared in SW 22:30:10 12/05/04 (1)
    • Like the a 320i heater core water valve coming in. - Jaime Obando 22:36:12 12/05/04 (0)
• 265 tranny and euro motors - Al Taylor 18:43:03 12/05/04 (4)
  • I wish I was closer ot NC... - Velocewest 18:56:47 12/07/04 (0)
  • beaucoup $ what do you mean by that? - Jaime Obando 21:37:17 12/05/04 (2)
    • Re: beaucoup $ what do you mean by that? - Al Taylor 20:10:52 12/06/04 (0)
    • Re: beaucoup $ what do you mean by that? - Rick 19:41:31 12/06/04 (0)
• Engine rebuild, what rust/oil cleaner should I use - M Keehn 17:20:56 12/05/04 (8)
  • Hot tank - Velocewest 11:24:55 12/06/04 (7)
    • yeah, it should look like this after hot tank, pic - Adam Wilson in Chicago 12:50:49 12/06/04 (6)
      • It's a thing of beauty (much more) - Mike W. 17:38:08 12/06/04 (0)
      • Re: yeah, it should look like this after hot tank, - M Keehn 14:32:28 12/06/04 (4)
        • how about this one? - Adam Wilson in Chicago 16:11:41 12/06/04 (2)
          • Re: Geez, - M Keehn 17:27:32 12/06/04 (1)
            • nope, just had head checked out and left alone nt - Adam Wilson in Chicago 20:07:39 12/06/04 (0)
        • I use WD-40 and steel or brass wool on pistons, - Velocewest 14:51:52 12/06/04 (0)
• Throttle linkage. - Eric Anderton 12:47:41 12/05/04 (0)
• M30head mystery,HELP... - ed 11:59:23 12/05/04 (4)
  • Re: M30head mystery,HELP... - Michael R from Melbourne 13:20:32 12/05/04 (3)
    • Re: M30head mystery,HELP... - ed 16:49:27 12/05/04 (2)
      • Re: M30head mystery,HELP... - Bill Bowes 19:56:28 12/05/04 (1)
        • Re: M30head mystery,HELP... - ed 21:00:19 12/10/04 (0)
• O2 sensor question for 530i - Gene S 11:23:10 12/05/04 (2)
  • Re: O2 sensor question for 530i - Robert Bondi 12:37:42 12/05/04 (1)
    • Re: O2 sensor question for 530i - Gene S 16:49:23 12/07/04 (0)
• FS BMW 735i Hartge H7S - Wietse 08:57:52 12/05/04 (9)
  • Re: FS BMW 735i Hartge H7S - eric J miller 19:24:18 12/17/04 (0)
  • Re: FS BMW 735i Hartge H7S - RonP 15:26:25 12/08/04 (0)
  • please send pics - Luquette 13:05:33 12/06/04 (1)
    • Your email does not work.... - Wietse 08:37:23 12/07/04 (0)
  • I'm interested - David P 10:38:26 12/06/04 (1)
    • Email address here - David P 12:22:22 12/07/04 (0)
  • Re: FS BMW 735i Hartge H7S - John 11:48:00 12/05/04 (0)
  • I will attest... Finest ride on the road and the - Lars Olbimmerguy 11:29:38 12/05/04 (0)
  • Re: FS BMW 735i Hartge H7S - Wietse 08:59:11 12/05/04 (0)
• Looking for pics for an E28 Calendar - Brian 07:50:32 12/05/04 (5)
  • How About an e12 Calendar? - Jm Davis 18:26:02 12/05/04 (0)
  • You may want to - booker535 13:29:18 12/05/04 (3)
    • Ahh..sorry! If I can get enough E12's I'll be.... - Brian 06:51:04 12/06/04 (2)
      • yep, I'd buy two E12 calendars if available (nt) - Adam Wilson in Chicago 11:04:43 12/06/04 (1)
        • I May Be Buying Two Anyway - John in Simi Valley 18:23:29 12/06/04 (0)
• my new contact info - ChuckNC 05:35:50 12/05/04 (0)
• m535i gearbox - Colin Whyte 04:37:09 12/05/04 (6)
  • Transmissions - Mike W. 12:05:49 12/05/04 (3)
    • Re: Transmissions - Ryan Bryan 20:44:28 12/05/04 (2)
      • But you have to install the speedo drive and gear - Velocewest 12:24:50 12/06/04 (0)
      • Correct you are - Mike W. 09:23:18 12/06/04 (0)
  • why do you want to switch it? - Adam Wilson in Chicago 06:41:23 12/05/04 (1)
    • Re: why do you want to switch it? - colin whyte 07:44:35 12/05/04 (0)
• 5 speed conversion with Motronic - Al Thompson 04:25:13 12/05/04 (3)
  • Re: 5 speed conversion with Motronic - Remy Davison 04:56:36 12/05/04 (2)
    • Re: 5 speed conversion with Motronic - Al Taylor 18:37:08 12/05/04 (0)
    • no, it's ok. - Peter Florance 07:37:39 12/05/04 (0)
• just bought 735i (off topic sorry) - Aaron from Oz 02:44:59 12/05/04 (1)
  • 735: a-ha: I know the answer to this one - Remy Davison 05:06:01 12/05/04 (0)
• just bought 735i (off topic sorry) - Aaron from Oz 02:44:30 12/05/04 (0)
• BBS air dam and Zender rear valance, FS in NC! - Jeff Olson 20:38:14 12/04/04 (1)
  • Do you have pictures? - Nate in Utah 16:00:26 12/07/04 (0)
• Cold start problems and auxillary air valve>>> - Craig in Davis 19:24:03 12/04/04 (12)
  • Re: Cold start problems and auxillary air valve>>> - Peter Florance 08:15:34 12/05/04 (2)
    • Thermo time switch>>> - Craig in Davis 10:17:54 12/05/04 (1)
      • Re: Thermo time switch>>> - Peter Florance 12:45:18 12/05/04 (0)
  • Some thoughts - Mike W. 22:35:45 12/04/04 (6)
    • Re: fuel pressure and flooding - Craig in Davis 06:54:57 12/05/04 (5)
      • Started right up and idled like a champ this AM - Craig in Davis 10:06:09 12/05/04 (4)
        • Re: Started right up and idled like a champ - Mike W. 11:49:36 12/05/04 (3)
          • you never specified which AAV you have.old or new? - Jaime Obando 22:19:43 12/05/04 (2)
            • New style AAV electrically/conductive heated >>> - Craig in Davis 07:45:08 12/06/04 (1)
              • How do you adjust the cold ilde speed? - Jon 20:00:00 12/11/04 (0)
  • Re: auxillary air valve>>> - Jared in S-W 21:20:30 12/04/04 (1)
    • manualy operated ball valve.. . very dependable!! - Very interesting.. tell me more!!! 22:25:03 12/05/04 (0)
• Car of the Month - December 2004 - Troy Rudolph 19:00:52 12/04/04 (3)
  • Very nice example in what looks like excellent.... - Misha 10:27:36 12/06/04 (0)
  • Re: Car of the Month - December 2004 - Will Ollison 03:57:08 12/05/04 (0)
  • Great car Christoph, Great photo's too - Michael R from Melbourne (Australia) 00:15:49 12/05/04 (0)
• Moving to Massachusetts, Considering driving now!! - Jared in S-W 18:53:44 12/04/04 (6)
  • ahh, no fair! - Art in CA 17:07:27 12/06/04 (0)
  • Your exempt from emissions! - Matt C 19:37:32 12/04/04 (4)
    • Re: YEEHAWWW - Jared in S-W 21:15:04 12/04/04 (3)
      • NH doesn't require it - papajimmm 81 528i 09:43:14 12/05/04 (0)
      • Yes they do - Matt C 06:33:20 12/05/04 (1)
        • Re: Yes they do - Jared in S-W (soon to be Pembroke) 14:10:01 12/05/04 (0)
• Anyone have extra rocker panel molding? - F.E. 14:15:12 12/04/04 (2)
  • let me check - Karl in KS 10:22:34 12/06/04 (1)
    • Re: let me check - F.E. 13:37:19 12/06/04 (0)
• Waiting with baited breath... - Beamher Bob 11:03:17 12/04/04 (2)
  • ho ho ho... - Ryan Bryan 14:52:36 12/04/04 (1)
    • Re: ho ho ho... - Beamher Bob 12:57:13 12/07/04 (0)
• 5er Fest 2005 Registration Figures and Information - Layton 10:44:31 12/04/04 (2)
  • Great! more... - Robert Bondi 11:12:32 12/04/04 (1)
    • Absolutely! - Layton 11:17:12 12/04/04 (0)
• Slow/sluggish throttle response - Edward Beech 05:55:49 12/04/04 (4)
  • Re: Slow/sluggish throttle response - Edward Beech 16:34:37 12/04/04 (3)
    • Re: Slow/sluggish throttle response - Edward Beech 04:23:25 12/05/04 (2)
      • Re: Slow/sluggish throttle response - Peter Florance 07:35:18 12/05/04 (1)
        • Re: Slow/sluggish throttle response - Tomas Tupy 23:09:36 12/05/04 (0)
• Car is idling faster with this cold weather Why? - Andres Moreno 03:10:22 12/04/04 (4)
  • Re: Car is idling faster with this cold weather Why? - Robert Bondi 10:39:40 12/04/04 (3)
    • I used to have the coolant-based... ? - Michael R from Melbourne 12:37:19 12/04/04 (2)
      • resistively-heated AAV - Robert Bondi 16:06:52 12/04/04 (1)
        • You learn something new everyday - Michael R from Melbourne 00:05:38 12/05/04 (0)
• Got the shocks(touring) and motor mounts-advice.. - Jaime Obando 03:07:39 12/04/04 (1)
  • Re: Got the shocks(touring) and motor mounts-advice.. - Jeff (Atlanta) 06:29:28 12/04/04 (0)
• clutch symptoms - gary in west Oz 23:10:25 12/03/04 (0)
• Distributor mechanical advance - Craig in Davis 14:49:01 12/03/04 (0)
• 5er Fest Autocross -- Let Me Clear Up Some Qs! - Shawn D. 14:04:22 12/03/04 (1)
  • ShawnD, can you call me or me call you - BNC 14:06:18 12/03/04 (0)
• Motoronic schematics - Hans V. 13:23:43 12/03/04 (0)
• Moving to Massachusetts 1981 528i FOR SALE - Jared in S-W 08:39:51 12/03/04 (11)
  • Listen carefully to papajimmmmmmmmmm - Lars Olbimmerguy 19:39:40 12/03/04 (1)
    • i'll second that. papajimm has my old 528i and it> - chrystobal 11:01:25 12/06/04 (0)
  • Re: Moving to Massachusetts 1981 528i FOR SALE - DonInVancouver 18:41:53 12/03/04 (1)
    • Re: Moving to Massachusetts 1981 528i FOR SALE - Jared in S-W 18:50:10 12/04/04 (0)
  • bring it with you or U will be sorry - papajimmm NH 81 528i 18:25:24 12/03/04 (0)
  • Is it a 5-speed? - Bruce is Seattle 11:17:52 12/03/04 (4)
    • Re: Is it a 5-speed? - Jared in S-W 11:34:00 12/03/04 (3)
      • Where is the Car? - John in Simi Valley 20:56:57 12/03/04 (2)
        • Re: Where is the Car? - Jared in S-W 18:56:09 12/04/04 (0)
        • Oh! There's the Car! - Reading Works Wonders 21:01:02 12/03/04 (0)
  • Lars, there's your cue... - ChuckNC 10:21:27 12/03/04 (0)
• 3.5l conversion doesn't rev - James (Tasmania) 23:34:14 12/02/04 (4)
  • Re: 3.5l conversion doesn't rev - peter@titaniumfasteners.com 12:25:34 12/03/04 (0)
  • Re: 3.5l conversion doesn't rev - Mark 09:41:42 12/03/04 (2)
    • Re: 3.5l conversion doesn't rev - James (Tasmania) 22:19:59 12/03/04 (1)
      • Re: 3.5l conversion doesn't rev - Blair 23:38:41 12/03/04 (0)
• If you want to go to Fiver Fest, don't delay... - Eric Q 18:53:23 12/02/04 (11)
  • You Guys Are Making a Wrong Assumption - Jim Davis - 5er Fest 2005 Treasurer 09:47:36 12/04/04 (3)
    • Sorry!!! - Eric Q 00:49:53 12/05/04 (0)
    • registration stats on the web site? - Robert Bondi 10:59:46 12/04/04 (1)
      • OK...post from Layton is "Yes" - Robert Bondi 11:05:19 12/04/04 (0)
  • Lee Cornett, you coming???? - BNC 14:04:56 12/03/04 (1)
    • Re: Lee Cornett, you coming???? - Lee Cornett 17:37:32 12/05/04 (0)
  • Re: If you want to go to Fiver Fest, don't delay... - Robert Bondi 23:49:39 12/02/04 (4)
    • From mye28.com - Eric Q 18:38:27 12/03/04 (0)
    • its the Mye28 people..... - Justin in C'ville 05:25:00 12/03/04 (2)
      • Whoa! That's a MISINTERPRETATION... - Shawn D. 13:48:28 12/03/04 (1)
        • When i say Event, i mean the autocross, not 5er fest - Justin in C'ville 21:33:32 12/03/04 (0)
• wtb wheels, maybe - Velocewest 16:09:23 12/02/04 (0)
• paging ryan bryan again.. - Art in CA 11:54:29 12/02/04 (1)
  • got it...reply sent.(nt) - Ryan Bryan 14:46:45 12/02/04 (0)
• look what I found - Chris Hollis 05:57:52 12/02/04 (0)
• '76 528 FS on ebay Australia - Damien in Sydney 18:32:14 12/01/04 (4)
  • Re: '76 528 FS on ebay Australia - Mark 07:30:02 12/02/04 (3)
    • My 76 has the same mirrors - 08-76 - Mike E 13:15:25 12/02/04 (2)
      • 75/76 had same small mirrors. Left-over from Bavs - Misha 17:49:33 12/02/04 (1)
        • Re: 75/76 had same small mirrors. Left-over from Bavs - Mark 09:21:31 12/03/04 (0)
• Just Bought an '81 528i want to do 3.5 conversion - M Keehn 18:03:26 12/01/04 (9)
  • Re: Just Bought an '81 528i want to do 3.5 conversion - Jeff (Atlanta) 21:37:00 12/03/04 (0)
  • Re: Just Bought an '81 528i want to do 3.5 conversion - ChuckNC 12:26:55 12/03/04 (2)
    • Re: Just Bought an '81 528i want to do 3.5 convers - M Keehn 19:28:18 12/03/04 (0)
    • That would depend on the swing set... - Tulsa Dave 14:08:24 12/03/04 (0)
  • that's a sharp car, nice interior - Adam Wilson in Chicago 07:49:03 12/02/04 (1)
    • Re: that's a sharp car, nice interior - M Keehn 12:27:23 12/02/04 (0)
  • Re: Just Bought an '81 528i want to do 3.5 conversion - Peter Florance 20:36:37 12/01/04 (2)
    • Re: Just Bought an '81 528i want to do 3.5 convers - M Keehn 05:48:55 12/02/04 (1)
      • Re: Just Bought an '81 528i want to do 3.5 convers - Ryan Bryan 06:33:32 12/02/04 (0)
• B6 Alpina Steering Wheel 4 Sale - Misha 17:47:17 12/01/04 (1)
  • send pics please - RDAvena 15:06:46 12/03/04 (0)
• `79 E12 euro drive away please $400 S.L.C. Ut. - spilmacher 17:32:16 12/01/04 (4)
  • Re: `79 E12 euro drive away please $400 S.L.C. Ut. - Nate in Utah 20:01:13 12/01/04 (1)
    • Re: `79 E12 euro drive away please $400 S.L.C. Ut. - spilmacher 15:33:59 12/02/04 (0)
  • Can you email pics? - Scott Atlanta 18:11:58 12/01/04 (1)
    • Re: Can you email pics? - spilmacher 15:51:42 12/02/04 (0)
• e28 rear carrier Q - Velocewest 15:59:51 12/01/04 (1)
  • Lee Cornett - Peter Florance 04:25:17 12/02/04 (0)
• cam shaft sprocket nut 41mm or 42mm? - Peter Florance 14:34:31 12/01/04 (5)
  • milimeters, shimlimeters! - Funf Dreisig 18:20:29 12/01/04 (3)
    • One better, a pipe wrench - Mike W. 22:34:37 12/01/04 (2)
      • Re: One better, a pipe wrench - Funf Dreisig 21:06:13 12/02/04 (1)
        • Absolutely!!! - Mike W. 22:36:37 12/02/04 (0)
  • Crap, HTK shows ID! No love (nt) - Velocewest 14:59:55 12/01/04 (0)
• Cheap 15x7 wheels - Wierd Al 12:34:19 12/01/04 (2)
  • Re: Cheap 15x7 wheels - Will Ollison 15:22:35 12/01/04 (0)
  • Re: Cheap 15x7 wheels - Chris Hollis 13:05:27 12/01/04 (0)
• Inner shift boot part number for 5-speed? Anyone? - Jeff Olson 11:50:28 12/01/04 (2)
  • Re: Inner shift boot part number for 5-speed? Anyone? - Sebastian from NC 10:21:05 12/06/04 (0)
  • 25 11 1 220 581 (nt) - Velocewest 14:57:20 12/01/04 (0)
• paging Matt, whatever happened with head bolts? - Adam Wilson in Chicago 10:33:54 12/01/04 (0)
• E12 Workshop Manual - Eric Anderton 10:11:59 12/01/04 (9)
  • Re: E12 Workshop Manual - Harold 20:05:37 12/08/04 (0)
  • Re: E12 Workshop Manual - brian in nevada 17:48:15 12/01/04 (0)
  • You can get that CD info online.... - Dan Lafley 16:33:02 12/01/04 (0)
  • Chilton has one - Art in CA 16:01:30 12/01/04 (0)
  • Re: E12 Workshop Manual - Al Taylor 12:27:02 12/01/04 (3)
    • That's a steal - Mike W. 18:30:06 12/01/04 (1)
      • Copy of blue book at Kinko's runs about $60 - Velocewest 09:13:09 12/02/04 (0)
    • Re: E12 Workshop Manual - Velocewest 15:01:54 12/01/04 (0)
  • Watch eBay for Haynes - Velocewest 11:18:27 12/01/04 (0)
• 1/4 mile times - Obawole Biddeau 07:49:11 12/01/04 (0)
• My pics Peter - Obawol Biddeau 07:31:36 12/01/04 (0)
• Body kit like this?? - Obawole Biddeau 07:24:33 12/01/04 (6)
  • Ouch! My Eyes! (nt) - Velocewest 21:48:33 12/03/04 (1)
    • Soak em in wet rice.. you'll adjust~ (nt) - Lars 13:07:21 12/04/04 (0)
  • You can make your on with glass fiber! - Zolka 01:05:06 12/03/04 (0)
  • I wannna know too - DAn J 15:18:01 12/01/04 (2)
    • It's Pricey... - Scott Atlanta 18:08:14 12/01/04 (1)
      • Re: It's Pricey... - Dan J 20:17:12 12/01/04 (0)
• 5er Fest 2005 Registration is now open!!! (more) - Rich in Savannah 06:19:54 12/01/04 (2)
  • Re: 5er Fest 2005 Registration is now open!!! (more) - Robert Bondi 23:50:54 12/01/04 (1)
    • Folks have the option of allowing... - Shawn D. {5er Fest Autocross Manager} 05:14:02 12/02/04 (0)
• Will this setup work for a turbo? - Dan J 19:01:05 11/30/04 (4)
  • I was hoping it would be large enough for 4-6 psi - Dan J 15:15:13 12/01/04 (1)
    • Dan, you need to do some research... - Mike in Chicago 06:57:55 12/02/04 (0)
  • I think the t25 might be a little small... - Mike in Chicago 06:50:52 12/01/04 (0)
  • forgot to add.. - Dan J 21:20:08 11/30/04 (0)
• Tulsa DAVE! - Scott Atlanta 18:44:34 11/30/04 (9)
  • Scott, Scott, Scott..... - Adam Wilson in Chicago 08:35:18 12/01/04 (0)
  • Hodge is back!?! - Robert Bondi 21:25:10 11/30/04 (1)
    • Re: Hodge is back!?! - Scott Atlanta 07:24:19 12/01/04 (0)
  • Dude, you are still alive! - TCD 19:27:20 11/30/04 (2)
    • Re: Dude, you are still alive! - Scott Atlanta 19:29:59 11/30/04 (1)
      • You have to have the car ready for 5erFest 2005! - TCD 21:07:31 11/30/04 (0)
  • Oh... sounds like you have a story to tell... - Tulsa Dave 19:18:39 11/30/04 (2)
    • Grrrrrrrrrrrr!!! - Tulsa Dave 19:20:19 11/30/04 (1)
      • Niiiiiiiiice! - Scott Atlanta 19:37:30 11/30/04 (0)
• 1979 528i Purchase Advice Needed - Brian in Oxnard (aka Brian in Abilene) 17:17:39 11/30/04 (5)
  • Thanks, everyone... - Brian in Oxnard (aka Brian in Abilene) 21:24:50 11/30/04 (0)
  • Re: 1979 528i Purchase Advice Needed - Mike W. 20:03:59 11/30/04 (0)
  • Knew you couldn't stay away! (nt) - Tulsa Dave 19:10:07 11/30/04 (0)
  • Hard to Tell, But . . . - John in Simi Valley 19:07:42 11/30/04 (1)
    • If you don't buy it I'll take it.. - Jaime Obando 20:53:54 11/30/04 (0)
• Valve clearances for a 3.5csi motor? - Nate in Utah 15:08:38 11/30/04 (1)
  • All M30's are the same (nt) - Velocewest 15:30:18 11/30/04 (0)
• Paging Karl K - Peter Floracne 13:17:36 11/30/04 (1)
  • Well... - Karl in KS 21:43:34 12/02/04 (0)
• Found a Hardy Beck e12 528, any knowlege of these? - Paul Clark 11:33:20 11/30/04 (7)
  • I think I have a old magazine review. More... - Jeff Olson 18:00:35 11/30/04 (3)
    • Re: I think I have a old magazine review. More... - Jim 16:49:19 12/01/04 (0)
    • I'm gonna go look at it sometime this week - Paul 04:57:10 12/01/04 (1)
      • Hard to lose on that - Velocewest 16:07:03 12/02/04 (0)
  • Re: Found a Hardy Beck e12 528, any knowlege of these? - Jim 17:57:45 11/30/04 (0)
  • Re: Found a Hardy Beck e12 528, any knowlege of th - Danny in S.Cal 11:52:59 11/30/04 (1)
    • Re: Found a Hardy Beck e12 528, any knowlege of th - Bob in San Jose 12:59:56 11/30/04 (0)
• distributor PGFU6 - Carlos Careaga 08:22:49 11/30/04 (2)
  • Carlos -- I have one - John in Simi Valley 19:12:13 11/30/04 (1)
    • Re: Carlos -- I have one - Carlos Careaga 07:48:35 12/01/04 (0)
• Paging Wietse..... please e-mail me about your car - Stan 08:06:41 11/30/04 (1)
  • Check your email... - Wietse 16:36:19 11/30/04 (0)
• E12 spotted by E28 owner (more) - SmokinDav in IA 07:35:34 11/30/04 (1)
  • Re: E12 spotted by E28 owner (more) - Carlos Careaga 08:42:04 11/30/04 (0)
• Question about 7Jx15 is47 alloy wheels - Allan A. 07:19:47 11/30/04 (2)
  • Re: Question about 7Jx15 is47 alloy wheels - Velocewest 09:55:14 11/30/04 (1)
    • Re: Question about 7Jx15 is47 alloy wheels - Michael R from Melbourne 19:47:59 12/01/04 (0)
• performance figured - Brett 05:42:27 11/30/04 (2)
  • Just seat of the pants - Mike W. 20:17:27 11/30/04 (1)
    • area under the curve - Peter Florance 04:07:31 12/01/04 (0)
• Wietse..... - Mike 04:35:13 11/30/04 (1)
  • Check your email... - Wietse 16:35:46 11/30/04 (0)
• 77 530 - Mark 22:03:02 11/29/04 (0)
• 1980 528 electrical problem - EB 20:41:13 11/29/04 (12)
  • Re: 1980 528 electrical problem - Carlos Careaga 07:57:45 12/01/04 (0)
  • Re: 1980 528 electrical problem - Tulsa Dave 20:39:02 11/30/04 (1)
    • Very good article Dave. Thanks! - Dale 17:53:34 12/01/04 (0)
  • Re: 1980 528 electrical problem - Carlos Careaga 08:44:52 11/30/04 (0)
  • Re: 1980 528 electrical problem - Chris Hollis 04:00:59 11/30/04 (4)
    • Almost certainly ignition switch - Remy Davison 07:46:43 11/30/04 (3)
      • Re: Almost certainly ignition switch - EB 17:24:31 11/30/04 (1)
        • Re: Almost certainly ignition switch - ChuckNC 13:04:54 12/01/04 (0)
      • Re: Almost certainly ignition switch - EB 17:17:58 11/30/04 (0)
  • Start at the alternator - Mike W. 22:34:11 11/29/04 (2)
    • Re: Start at the alternator - EB 17:21:17 11/30/04 (1)
      • But still, what is the voltage there - Mike W. 20:10:19 11/30/04 (0)
• What are the best redline products for the E12? - Eric Anderton 19:54:25 11/29/04 (9)
  • That's the stuff - Mike W. 22:26:15 11/29/04 (0)
  • Wow! That's going to be one noisy beast. - Lars Olbimmerguy 21:07:03 11/29/04 (7)
    • I use MTL in trans and 75W90 in diff in my M535i - Adam Wilson in Chicago 06:11:30 11/30/04 (2)
      • Not disputing superiority, just not necessary, + - Lars Olbimmerguy 16:15:17 11/30/04 (0)
      • Re: I use MTL in trans and 75W90 in diff in my M535i - Jake Hall 09:22:59 11/30/04 (0)
    • Other Thoughts ON Synthetics.... and mileage... - Lars Olbimmerguy 21:14:00 11/29/04 (3)
      • Re: Other Thoughts ON Synthetics.... and mileage... - Chris Hollis 04:04:12 11/30/04 (1)
        • That was the idea behind sharing...... - Lars Olbimmerguy 12:31:55 11/30/04 (0)
      • I'm pleased I was 12,000 miles away!! - Al from Oz 22:07:30 11/29/04 (0)
• Question for Matt D UK - Allan A. 18:57:08 11/29/04 (1)
  • Here you go. - Matt D UK 10:04:58 11/30/04 (0)
• Tech question about the board - Michael R from Melbourne 17:22:46 11/29/04 (2)
  • Re: Tech question about the board - Mike W. 22:39:34 11/29/04 (1)
    • Great link to parts catalogue for all to use. - Michael R from Melbourne 17:29:31 12/01/04 (0)
• e28 Radiator upgrade questions - Michael R from Melbourne 17:17:30 11/29/04 (5)
  • I used.... - mike 05:00:27 11/30/04 (2)
    • I'll write a more detailed FAQ if I get time (nt) - Michael R from Melbourne 17:32:07 12/01/04 (1)
      • Just testing a link to the parts catalogue - Michael R from Melbourne 19:28:44 12/01/04 (0)
  • Re: e28 Radiator upgrade questions - Mike W. 22:44:47 11/29/04 (0)
  • Re: e28 Radiator upgrade questions - another - Michael R from Melbourne 17:39:49 11/29/04 (0)
• paging Ryan Bryan ... - Art in CA 16:50:51 11/29/04 (2)
  • Re: paging Ryan Bryan ... - Ryan Bryan 22:07:58 11/29/04 (1)
    • thanks man - Art in CA 13:14:09 12/01/04 (0)
• Bonehead move... WTB - C-pillar vent covers - Bruce in Seattle 14:50:00 11/29/04 (4)
  • I have some... - Scott in ATLANTA...I know, It's been a while.... 20:42:20 11/29/04 (3)
    • Scott? Scott who? We used to know a Scott... - Tulsa Dave 09:22:13 11/30/04 (0)
    • nice to hear from you - Adam Wilson in Chicago 09:11:21 11/30/04 (1)
      • Re: nice to hear from you - Scott Atlanta 18:39:48 11/30/04 (0)
• A great Big Thanks to Bob M. in San Jose for... - IceHaus Dave 13:56:19 11/29/04 (0)
• Finding the specs on a part - Allan A. 11:40:32 11/29/04 (5)
  • Re: Finding the specs on a part - Velocewest 12:00:14 11/29/04 (4)
    • Re: Finding the specs on a part - Allan A. 12:24:25 11/29/04 (3)
      • Re: Finding the specs on a part - Velocewest 12:59:23 11/29/04 (0)
      • Re: hows this ? - Matt D UK 12:31:55 11/29/04 (1)
        • Re: its an e24 rim,nt - Matt D UK 12:34:07 11/29/04 (0)
• Wiring diagram - Sebastian 09:42:26 11/29/04 (2)
  • Re: Wiring diagram - Hans V. 12:27:32 11/29/04 (1)
    • Re: Wiring diagram - Eb 17:39:22 11/30/04 (0)
• Supercharger, Turbo, Rebuild? long - Mike 07:07:20 11/29/04 (20)
  • Re: Supercharger, Turbo, Rebuild? long - Mike 14:43:40 11/29/04 (1)
    • Supercharger option - Mike E 17:32:33 11/30/04 (0)
  • Re: Supercharger, Turbo, Rebuild? long - Velocewest 10:35:16 11/29/04 (8)
    • Turbo L-jet - Mike in Chicago 14:00:57 11/29/04 (7)
      • The point was... - TCD 16:55:52 11/29/04 (6)
        • well said - Peter Florance 05:00:23 11/30/04 (5)
          • Poor taste is an understatement. - Mike in Chicago 07:24:30 11/30/04 (4)
            • hey! - Peter Florance 07:46:12 11/30/04 (0)
            • Do you really have less than $500 in it? - TCD 07:28:37 11/30/04 (2)
              • Re: Do you really have less than $500 in it? - Mike in Chicago 12:10:33 11/30/04 (1)
                • Of course I remember. - TCD 19:03:39 11/30/04 (0)
  • Buy my car, save tons of $$. - Wietse 08:35:59 11/29/04 (3)
    • My ears are pricked, what are you asking for it? - Nate in Utah 16:30:16 11/29/04 (0)
    • What are the details? nt - mike 14:45:03 11/29/04 (0)
    • Wietse, are you selling? - Velocewest 10:24:36 11/29/04 (0)
  • New manifolds are still available... - Shawn D. 08:10:44 11/29/04 (0)
  • Re: Supercharger, Turbo, Rebuild? long - Mike in Chicago 08:08:42 11/29/04 (3)
    • Mike, how are you setting boost? - Velocewest 15:01:39 11/29/04 (2)
      • Re: Mike, how are you setting boost? - Mike in Chicago 07:02:49 11/30/04 (1)
        • Thanks Mike! (NT) - Velocewest 10:00:27 11/30/04 (0)
• Noisy whining gearbox, which bearing is bad - Tomas Tupy 21:40:20 11/28/04 (1)
  • Re: Noisy whining gearbox, which bearing is bad - Mike W. 22:01:54 11/28/04 (0)
• Volvo Calipers - Velocewest 18:04:16 11/28/04 (2)
  • how about the rears? - Peter Florance 19:29:08 11/28/04 (1)
    • Alfa? - Velocewest 20:33:44 11/28/04 (0)
• Digital to Analog clock conversion, dash lights >> - Craig in Davis 17:16:11 11/28/04 (12)
  • Re: Digital to Analog clock conversion, dash lights >> - Dale 12:33:44 11/29/04 (0)
  • Re: Analog clock - Allan A. 05:29:40 11/29/04 (0)
  • 12:00 vs. 24:00 digital... - Tulsa Dave 19:33:25 11/28/04 (5)
    • Re: 12:00 vs. 24:00 digital... - Peter Florance 03:46:28 11/29/04 (1)
      • Re: 12:00 vs. 24:00 digital... - Velocewest 10:37:20 11/29/04 (0)
    • Re: 12:00 vs. 24:00 digital... - Velocewest 20:35:39 11/28/04 (2)
      • Re: 12:00 vs. 24:00 digital... - Bandi 19:40:03 12/02/04 (0)
      • I like the 24:00 version too... - Tulsa Dave 20:41:31 11/28/04 (0)
  • Re: Digital to Analog clock conversion, dash lights >> - Velocewest 18:05:11 11/28/04 (3)
    • Re: Digital to Analog clock conversion, dash lights >> - Allan A. 05:24:39 11/29/04 (0)
    • The digital has 4 wires, analog has 3 - Craig in Davis 19:03:01 11/28/04 (0)
    • I too have done this. - Michael R from Melbourne 18:15:26 11/28/04 (0)
• rocker shafts - peter mooney 15:07:17 11/28/04 (1)
  • Re: rocker shafts - Obawole Biddeau 17:41:58 11/28/04 (0)
• Melbourne Mini-fest Sunday Dec 12th - Michael R from Melbourne 15:01:41 11/28/04 (2)
  • Re: Melbourne Mini-fest Sunday Dec 12th - Mike E 16:51:48 11/28/04 (1)
    • Re: Melbourne Mini-fest Sunday Dec 12th - mattp melb 18:01:38 12/06/04 (0)
• '80 528i in scrap yard - Nathan in Spokane 13:51:42 11/28/04 (1)
  • Re: '80 528i in scrap yard - justin 23:34:25 11/28/04 (0)
• Norway, Sweden, Denmark - Glenn Simon 11:45:52 11/28/04 (6)
  • Of course other Scandinavians are here - Bert-Ola 12:58:14 11/29/04 (1)
    • Re: Of course other Scandinavians are here - Niklas Edlund 08:11:08 12/14/04 (0)
  • Re: Norway, Sweden, Denmark - Hans V. 23:21:12 11/28/04 (3)
    • Re: Norway, Sweden, Denmark - GSS 08:19:45 11/29/04 (2)
      • Re: Norway, Sweden, Denmark - Hans V. 11:09:31 11/29/04 (1)
        • Re: Norway, Sweden, Denmark - GSS 14:19:35 11/29/04 (0)
• anyone fixed cowl cracks? - Peter Florance 11:24:50 11/28/04 (5)
  • Re: performance ignition upgrade - Frank Prettyshield 03:53:10 11/30/04 (1)
    • do not read spam above - Peter Florance 04:23:05 11/30/04 (0)
  • Wonder if you can use the same trick as on glass - Lars Olbimmerguy 21:34:05 11/28/04 (1)
    • Yes. It'd still need to be repaired, though. (e) - Shawn D. 08:12:28 11/29/04 (0)
  • Re: anyone fixed cowl cracks? - Adam Wilson in Chicago 18:05:13 11/28/04 (0)
• 320i runners data, and availability - Finally6 11:24:15 11/28/04 (6)
  • Re: 320i runners data, and availability - Peter Florance 11:26:39 11/28/04 (5)
    • Re: 320i runners data, and availability - Finally6 11:30:40 11/28/04 (4)
      • Re: 320i runners data, and availability - Michael R from Melbourne 14:41:37 11/28/04 (3)
        • Anyone have any 320i runners for sale?? - Finally6 15:56:20 11/28/04 (2)
          • Sure, I've got a couple - Mike W. 20:48:53 11/28/04 (1)
            • Re: Sure, I've got a couple - Finally6 08:54:25 11/29/04 (0)
• Tire repair (on e12 of course) - Chris Hollis 06:57:48 11/28/04 (3)
  • Re: Tire repair (on e12 of course) - Jeff (Atlanta) 10:42:04 11/28/04 (1)
    • Re: Tire repair (on e12 of course) - Chris Hollis 14:18:39 11/28/04 (0)
  • Have it patched from the inside! More... - Jeff Olson 08:51:20 11/28/04 (0)
• 2.8L stuff for sale! - Nick in Co Springs 23:52:26 11/27/04 (2)
  • Re: 2.8L stuff for sale! - justin 23:36:29 11/28/04 (1)
    • Nope, sorry. No driveshaft. (nt) - Nick in Co Springs 06:39:16 11/29/04 (0)
• Exhaust manifold porting, Is it worth the time? - Tomas Tupy 23:30:46 11/27/04 (2)
  • Re: Exhaust manifold porting, Is it worth the time? - peter mooney 15:14:28 11/28/04 (1)
    • I disagree - Mike W. 20:53:56 11/28/04 (0)
• Need auto-tranny installed - sdjeremyv 22:21:02 11/27/04 (0)
• Need auto-tranny installed - sdjeremyv 22:20:46 11/27/04 (0)
• Question about ballance I should have thought of e - Dave_in_VA 19:08:53 11/27/04 (0)
• bucking - Carlos Careaga 15:31:15 11/27/04 (2)
  • Re: bucking - Peter Florance 15:38:21 11/27/04 (1)
    • Re: bucking - Carlos Careaga 16:40:32 11/27/04 (0)
• ok now what? - Martin in Pdx 13:49:06 11/27/04 (10)
  • Re: ok now what? - F.E. 20:04:52 11/27/04 (0)
  • Simple Things First - John in Simi Valley 15:46:02 11/27/04 (1)
    • Re: Simple Things First - Martin in Pdx 16:01:02 11/27/04 (0)
  • Re: ok now what? - Carlos Careaga 15:37:10 11/27/04 (3)
    • Re: ok now what? - Peter Florance 15:39:55 11/27/04 (2)
      • Re: ok now what? - Martin in Pdx 16:04:54 11/27/04 (1)
        • Re: ok now what? - Carlos Careaga 17:51:36 11/27/04 (0)
  • Re: ok now what? - Chris Hollis 14:48:37 11/27/04 (2)
    • Re: ok now what? - Martin in Pdx 15:31:18 11/27/04 (1)
      • Re: ok now what? - Chris Hollis 19:04:20 11/27/04 (0)
• Wheel fitment - Matt D UK 04:57:09 11/27/04 (5)
  • Thanks a lot chaps! nt - Matt D UK 10:05:51 11/29/04 (0)
  • Re: Wheel fitment - peter mooney 15:21:54 11/28/04 (0)
  • Re: Wheel fitment - Ryan Bryan 08:19:25 11/27/04 (2)
    • I think... - Mike W. 11:24:18 11/27/04 (1)
      • Re: Keep the info coming - Matt D 11:58:05 11/27/04 (0)
• int radiator fluid leak not cntrol valve.. help!! - eric in denver 19:41:29 11/26/04 (8)
  • Take the hoses off the firewall and go to , , , - Jeff (Atlanta) 08:16:38 11/29/04 (0)
  • my guess............... - Chris Hollis 14:52:26 11/27/04 (4)
    • Re: my guess............... - eric in denver 18:03:28 11/27/04 (3)
      • Re: my guess............... - Chris Hollis 19:11:37 11/27/04 (2)
        • Im often misunderstood so nothing new.... - eric in denver 22:41:02 11/27/04 (1)
          • Re: Im often misunderstood so nothing new.... - Chris Hollis 17:10:00 11/28/04 (0)
  • Re: int radiator fluid leak not cntrol valve.. help!! - Craig in Davis 07:36:46 11/27/04 (1)
    • im with you - eric in denver 17:41:37 11/27/04 (0)
• About Turbocharging my Bmw - Obawole Biddeau 19:30:09 11/26/04 (9)
  • Re: About Turbocharging my Bmw - peter mooney 15:27:29 11/28/04 (0)
  • M30's take turbo's well, but - Mike W. 22:31:30 11/26/04 (7)
    • Re: M30's take turbo's well, but - Obawole Biddeau 08:27:02 11/27/04 (0)
    • TCD - Peter Florance 04:15:05 11/27/04 (6)
      • Re: Custom signal lights (Update) - Freddy Dyer 22:57:05 11/29/04 (0)
      • Re: TCD - Mark 09:28:12 11/27/04 (4)
        • Re: TCD - Obawole Biddeau 20:13:42 11/27/04 (3)
          • Re: TCD - Mark 01:54:51 11/28/04 (2)
            • Re: TCD Peter HELP PLZ!! - Obawole Biddeau 17:17:06 11/28/04 (1)
              • help is closer than you know - Peter FLorance 03:51:16 11/29/04 (0)
• WTB:78' 530i Camshaft (Used) - Obawole Biddeau 19:10:49 11/26/04 (0)
• '75 530i - Velocewest 19:00:37 11/26/04 (2)
  • Re: '75 530i - Adam Wilson in Chicago 13:14:39 11/27/04 (0)
  • Re: '75 530i - Mark 08:57:19 11/27/04 (0)
• strut spacers? - stewart in slc 18:32:00 11/26/04 (1)
  • Re: strut spacers? - Mike W. 19:30:55 11/26/04 (0)
• blocked water system? - gary in West OZ 16:27:08 11/26/04 (0)
• car won't open up until 4000 rpm - Art in CA 15:45:00 11/26/04 (1)
  • Re: car won't open up until 4000 rpm - Karl in KS 18:43:49 11/26/04 (0)
• anyone need the EPC? - Art in CA 13:26:22 11/26/04 (1)
  • Electronic Parts Catalogue, that is.. - Art in CA 21:14:26 11/26/04 (0)
• WTB - 2 alloy rims for '78 530i - Allan A. 13:17:23 11/26/04 (1)
  • I have several in Charlotte, NC. More... - Jeff Olson 16:22:54 11/26/04 (0)
• looking for a set of new oversized pistons and rin - Joel 12:54:30 11/26/04 (2)
  • Some thoughts - Mike W. 18:03:56 11/26/04 (0)
  • Give this fellow a call : - Jeff (Atlanta) 16:45:45 11/26/04 (0)
• Couple of oddball questions. - Dave_in_VA 12:49:35 11/26/04 (3)
  • Front cover - Velocewest 22:03:13 11/26/04 (3)
    • Re: 014 is 2.5 Bar - Trish Tileston 04:03:08 11/30/04 (0)
    • M10 has no hole. Dist is on rear of head. - Dave_in_VA 05:09:41 11/27/04 (1)
      • Oh that's right. Duh. - Velocewest 10:03:14 11/27/04 (0)
• Engine questions for Mike W. - Medly 07:42:44 11/26/04 (5)
  • Yes - Mike W. 11:36:13 11/26/04 (2)
    • thanks, more - Medly 11:39:16 11/26/04 (1)
      • Not close, the same - Mike W. 11:54:43 11/26/04 (0)
  • Re: Engine questions for Mike W. Question on Bore? - Mango 09:50:05 11/26/04 (1)
    • More like 6MM, but - Mike W. 11:50:57 11/26/04 (0)
• thankful for lots...but not this heater core leak! - eric in denver 14:32:30 11/25/04 (0)
• thankful for lots...but not this heater core leak! - eric in denver 14:29:11 11/25/04 (0)
• re: Am I being conned by out of town mechanic?? - drugdoc 14:07:19 11/25/04 (5)
  • May I ask which shop you are dealing with? - Klaus 18:26:34 11/26/04 (0)
  • I'd suspect a vacuum leak or bad AFM - Frank H 12:30:30 11/26/04 (0)
  • Have you changed your Fuel Filter lately. , , , - Jeff (Atlanta) 08:29:43 11/26/04 (0)
  • STOP!!! - WMEC615@MSN.COM 07:43:14 11/26/04 (0)
  • Run, don't walk from that shop - Mike W. 18:56:28 11/25/04 (0)
• I'm looking for some nice tan floor mats... - Nate in Utah 10:45:38 11/25/04 (0)
• Ideas on a rear strut-tower brace and or sway-bar - Nate in Utah 10:41:46 11/25/04 (6)
  • Korman has rear bars that bolt on....... - Mike 13:22:53 11/30/04 (0)
  • why not e28 strut tower bar? - ...tom 14:29:00 11/26/04 (1)
    • not sure. on the front - Peter Florance 15:07:26 11/26/04 (0)
  • Re: Ideas on a rear strut-tower brace and or sway-bar - Peter Florance 04:16:48 11/26/04 (2)
    • Re: Ideas on a rear strut-tower brace and or sway- - Karl in KS 08:04:47 11/26/04 (1)
      • Thanks a bunch yall. - Nate in Utah 18:59:23 11/26/04 (0)
• 78' 530i Gearbox - Obawole Biddeau 23:31:17 11/24/04 (3)
  • Re: 78' 530i Gearbox - Tomas Tupy 12:24:17 11/25/04 (2)
    • Re: 78' 530i Gearbox - Obawole Biddeau 19:00:58 11/25/04 (1)
      • Re: 78' 530i Gearbox - Jeff (Atlanta) 08:35:56 11/26/04 (0)
• hesitation accelleration - Andrew 18:04:39 11/24/04 (1)
  • Re: hesitation accelleration - Karl in KS 07:04:40 11/25/04 (0)
• ebay air con console panels - james 14:02:07 11/24/04 (0)
• Volvo calipers - peter mooney 10:30:22 11/24/04 (7)
  • Re: Volvo calipers - Big Dog 13:56:36 11/24/04 (1)
    • Porterfield will do pads for anything - Velocewest 14:28:36 11/24/04 (0)
  • Re: Volvo calipers - Michael R from Melbourne 11:28:41 11/24/04 (4)
    • Re: 240s lol - Matt D UK 16:02:04 11/25/04 (0)
    • Re: Volvo calipers - Velocewest 12:18:18 11/24/04 (2)
      • Re: Volvo calipers - peter mooney 15:56:13 11/25/04 (1)
        • I thought about that later - Velocewest 18:53:02 11/26/04 (0)
• 3.0 diesel engine swap - Zolka 05:09:41 11/24/04 (1)
  • Re: 3.0 diesel engine swap - Mark 08:59:10 11/25/04 (0)
• Need tranny rebuilt and or installed - sdjeremyv 00:41:02 11/24/04 (2)
  • Where are you located? - Jeff (Atlanta) 11:24:15 11/24/04 (1)
    • Someone in San Diego help this fellow . (nt) - Jeff (Atlanta) 07:50:32 11/25/04 (0)
• Camshaft - Obawole Biddeau 22:54:33 11/23/04 (0)
• low clutch pedal - eric in denver 22:06:50 11/23/04 (1)
  • Re: low clutch pedal - Jeff (Atlanta) 11:22:37 11/24/04 (0)
• 1981 528i shears 3rd drive shaft - justin 20:42:35 11/23/04 (6)
  • shears where? (nt) - Velocewest 22:11:22 11/26/04 (1)
    • Re: shears where? (nt) - justin 23:39:19 11/28/04 (0)
  • Re: 1981 528i shears 3rd drive shaft - Karl in KS 17:01:41 11/24/04 (3)
    • BMW cca is car club of america - stewart in slc 15:56:35 11/25/04 (0)
    • Re: 1981 528i shears 3rd drive shaft - justin 11:52:14 11/25/04 (1)
      • BMWCCA.org - Erik M. 17:59:04 11/26/04 (0)
• Best Possible Way to polish up that valve cover - Jerry Baldwin in Vermont 17:06:02 11/23/04 (8)
  • Here's How ---> - John in Simi Valley 22:47:45 11/23/04 (1)
    • This works?!! --yeehaw!, gots a new project :)) - Art in CA 15:22:19 11/24/04 (0)
  • Here's how I'd tackle it - Mike W. 22:06:53 11/23/04 (0)
  • Re: Best Possible Way to polish up that valve cove - Tarazona 20:31:59 11/23/04 (0)
  • Re: Best Possible Way to polish up that valve cover - Daniel H. 18:32:15 11/23/04 (3)
    • I'm gunna paint mine black - Michael R from Melbourne 18:53:13 11/23/04 (2)
      • Put a Roundel on it - Remy Davison 06:16:42 11/25/04 (0)
      • Black Suggestion - John in Simi Valley 22:14:12 11/24/04 (0)
• Hesitation when cold + throttle. - Mitch L. in Sydney 15:24:30 11/23/04 (6)
  • I'll give it a try - Mike W. 22:19:03 11/23/04 (5)
    • Evil, evil Zeniths... - Mitch L. from Sydney 23:41:48 11/24/04 (4)
      • Re: Zeniths... - Karl in KS 06:47:09 11/25/04 (3)
        • Not all carbs are evil, but those Zeniths are! - Mike W. 20:07:24 11/25/04 (2)
          • ... sounds like a plan. - Mitch L. in Sydney 07:06:25 11/26/04 (1)
            • Re: ... sounds like a plan. - Mark 08:43:09 11/26/04 (0)
• spark plug wires - Andrew 12:11:43 11/23/04 (4)
  • Re: spark plug wires - Walt Barie 05:00:52 11/24/04 (0)
  • Re: spark plug wires - brian in nevada 18:26:15 11/23/04 (0)
  • Re: spark plug wires - Peter Florance 15:03:22 11/23/04 (1)
    • Agreed about the not being impressed... - Lenny D. 22:31:48 11/23/04 (0)
• 92 535c\head reassmbly - joe 10:08:44 11/23/04 (1)
  • Re: 92 535c\head reassmbly - papajimmm nh 81 528i 12:05:14 11/23/04 (0)
• 89-93 m30 swap - Brett 05:02:58 11/23/04 (3)
  • Re: 89-93 m30 swap - Karl in KS 17:13:10 11/24/04 (1)
    • thanks for the info - Brett 05:40:10 11/30/04 (0)
  • Re: 89-93 m30 swap - Big Dog 07:40:07 11/23/04 (0)
• b7turbos - jacob_ in ny 23:54:19 11/22/04 (9)
  • Re: b7turbos - jacob in ny 08:31:23 11/23/04 (1)
    • seems like a b/s tease to me - Adam Wilson in Chicago 09:17:41 11/23/04 (0)
  • DETAILS!!!! PICTURES???? EMAIL?? (nt) - Adam Wilson in Chicago 07:31:38 11/23/04 (0)
  • My dog needs braces! MUST sell MINT M535i... - Jeff Olson 06:53:35 11/23/04 (1)
    • laugh my arse off, so true (nt) - Adam Wilson in Chicago 07:33:58 11/23/04 (0)
  • Tried to e-mail, I think this is a scam? More... - Jeff Olson 06:27:41 11/23/04 (0)
  • Email adress - Bert-Ola 03:25:50 11/23/04 (0)
  • and an email address/phone number - ...tom 02:43:36 11/23/04 (0)
  • Details please! - Mike E 02:26:52 11/23/04 (0)
• FS: engines and other stuff - ben 21:58:12 11/22/04 (8)
  • Re: FS: engines and other stuff - Dusan Vacval 07:02:33 11/24/04 (0)
  • Cheap ECU's, buy a spare - Mike W. 22:27:02 11/23/04 (5)
    • Re: Cheap ECU's, buy a spare - Jerry Baldwin in Vermont 17:49:52 11/24/04 (4)
      • Figurative termq - Mike W. 23:10:05 11/24/04 (3)
        • Re: Figurative termq - Jerry Baldwin in Vermont 07:47:14 11/25/04 (2)
          • Air flow meter and - Mike W. 12:39:08 11/25/04 (1)
            • Re: Air flow meter and - Jerry Baldwin in Vermont 16:50:51 11/25/04 (0)
  • Re: FS: engines and other stuff - Andrew 06:11:24 11/23/04 (0)
• nice '75 530i on ebay, in Oregon - Adam Wilson in Chicago 20:39:21 11/22/04 (4)
  • Re: nice '75 530i on ebay, in Oregon - Rick 03:23:31 11/24/04 (2)
    • I doubt it - Adam Wilson in Chicago 04:43:42 11/24/04 (1)
      • Re: I doubt it - Rick 05:06:01 11/24/04 (0)
  • Hmmm... might have to go look - Velocewest 11:50:23 11/23/04 (0)
• Who bought Jerry Kingman's M535i 'clone'? - Jeff Olson 18:11:13 11/22/04 (4)
  • Re: Who bought Jerry Kingman's M535i 'clone'? - jerry kingman 14:26:39 11/24/04 (0)
  • Re: Who bought Jerry Kingman's M535i 'clone'? - jim at da shop 01:12:09 11/23/04 (2)
    • This is the 2nd time I should've bought! More... - Jeff Olson 06:37:27 11/23/04 (1)
      • Re: This is the 2nd time I should've bought! More... - Lee Cornett 14:45:15 11/23/04 (0)
• Anyone live in Gettysburg Pa - ken 17:48:21 11/22/04 (0)
• New purchase - Martin MAgnia 13:39:31 11/22/04 (1)
  • Re: New purchase - Remy Davison 19:28:00 11/22/04 (0)
• my dogleg shifter has a rattle at 3500rpm & up - marc79euro645 20:48:02 11/21/04 (3)
  • Re: my dogleg shifter has a rattle at 3500rpm & up - Dieter 01:51:21 11/28/04 (0)
  • Whinning tranny - Tomas Tupy 22:18:51 11/21/04 (1)
    • 50/50 mix of lucas synthetic&slick50 gear oils - marc79euro645 22:20:16 11/23/04 (0)
• Aux air valve repair - gary in west OZ 18:59:55 11/21/04 (0)
• Paging Chuck D. to the red courtesy phone - Remy Davison 18:21:20 11/21/04 (0)
• Successfuly Repaced Water Pump, Beat Haynes Manual - Tomas Tupy 18:17:12 11/21/04 (0)
• For sale lady costume & design jewlelry - Danny Dhanraj 10:39:18 11/21/04 (1)
  • complaint sent to aol.com - Peter Florance 14:20:31 11/21/04 (0)
• For sale lady costume & design jewlelry - Danny Dhanraj 10:38:12 11/21/04 (0)
• OK... I need help on this decision. - Frank H 09:40:46 11/21/04 (21)
  • Go Nissan Engine!! - Dan J 19:33:05 11/23/04 (0)
  • Why not... - Mike E 02:32:32 11/23/04 (0)
  • Sounds like this one is just for fun, so.... - Tulsa Dave 07:08:57 11/22/04 (0)
  • Frank, go for something different! - TCD 05:41:59 11/22/04 (5)
    • Re: Frank, go for something different! - Frank H 08:05:00 11/22/04 (1)
      • 300hp n/a - TCD 08:37:30 11/22/04 (0)
    • here's your barf bag with a Roundel on it - Adam Wilson in Chicago 05:50:33 11/22/04 (2)
      • don't need no stinkin' roundel - ...tom 13:40:23 11/22/04 (0)
      • You own your BMW for a totally different reason. - TCD 06:49:47 11/22/04 (0)
  • Re: OK... I need help on this decision. - Eric Q 23:04:21 11/21/04 (1)
    • completely in agreement, SB domestic V8's ughh nt - Adam Wilson in Chicago 05:49:49 11/22/04 (0)
  • Re: OK... I need help on this decision. - gary in west Oz 19:10:53 11/21/04 (1)
    • Re: OK... I need help on this decision. - gary in west Oz 19:16:54 11/21/04 (0)
  • Well, Frank.... It's about time for something new - Lars Olbimmerguy 12:14:50 11/21/04 (7)
    • personally I think sticking with a BMW engine .... - Adam Wilson in Chicago 17:16:44 11/21/04 (1)
      • BMW V8 just doesn't cut it on $ per HP ratio - Velocewest 17:27:04 11/21/04 (0)
    • Ford 302 is 50 pounds lighter? - John in Simi Valley 12:37:52 11/21/04 (4)
      • Stock Detroit Iron.... - Lars Olbimmerguy 15:14:23 11/21/04 (3)
        • More Power is Always More Gooder - John in Siimi Valley 19:01:19 11/21/04 (2)
          • OK John... try this link . go back to 302 folder>> - Lars Olbimmerguy 19:36:27 11/21/04 (0)
          • RE: the bell housing.. Just getting to that - Lars OBG 19:31:22 11/21/04 (0)
• 5er Fest Registration Opens December 1st! - 5er Fest 2005 22:15:15 11/20/04 (0)
• Angel Eyes installed - Bill Hynes 15:45:00 11/20/04 (4)
  • did you remove the glass for install? - sev 19:35:43 11/22/04 (1)
    • Re: did you remove the glass for install? - Bill Hynes 18:52:36 11/24/04 (0)
  • Picture did not work, try this one... - Bill Hynes 15:46:41 11/20/04 (1)
    • Re: Picture did not work, try this one... - stewart in slc 15:48:16 11/20/04 (0)
• Ebay question, kinda OT - Al from Oz 14:34:38 11/20/04 (2)
  • I think it's pretty simple - Frank H 08:36:05 11/21/04 (0)
  • I should proof read! - Al from Oz 14:37:44 11/20/04 (0)
• ECU - Eric Anderton 14:25:50 11/20/04 (1)
  • yes they are the same part - Peter Florance 17:05:07 11/20/04 (0)
• ECU - Eric Anderton 14:25:18 11/20/04 (0)
• Time for Suspension work! - Dan Lafley 13:38:58 11/20/04 (1)
  • hmmm..... everything? - Adam Wilson in Chicago 15:27:00 11/20/04 (0)
• bending your subframe to align the car (mye28) - Adam Wilson in Chicago 07:05:19 11/20/04 (9)
  • Unfortunately.... - Klaus 11:12:10 11/21/04 (5)
    • Excellent post, and info Klaus, Firstfives FAQ??? - Adam Wilson in Chicago 17:07:40 11/21/04 (4)
      • with Klaus's permission, why not? - Peter Florance 04:37:01 11/22/04 (3)
        • Re: with Klaus's permission, why not? - Klaus 21:28:07 11/22/04 (2)
          • yes! - Peter Florance 03:20:07 11/23/04 (1)
            • Will work on it next week, out of town... - Klaus 18:28:41 11/26/04 (0)
  • Argh! - Velocewest 08:46:03 11/20/04 (2)
    • Bias Ply tire technology is old????? - Lars Olbimmerguy 09:48:24 11/20/04 (1)
      • Already replaced ! "Trias-tires" - Jeff (Atlanta) 14:55:31 11/20/04 (0)
• looking for exhaust manifold - Eli 23:02:10 11/19/04 (1)
  • I think I've got one - Mike W. 11:56:47 11/20/04 (0)
• Any 0-60 times in a e12 with a 3.5litre and 5sp - Rami 21:08:51 11/19/04 (4)
  • 5.9sec - Zolka 04:52:46 11/22/04 (0)
  • 7.2 seconds - Peter Florance 02:53:50 11/20/04 (2)
    • Yup - Karl in KS 04:22:53 11/20/04 (1)
      • Wow ! - John in Simi Valley 20:45:43 11/20/04 (0)
• Cheap Angel Eyes... - Bill Hynes 20:44:58 11/19/04 (1)
  • Re: Cheap Angel Eyes... - Karl in KS 04:25:32 11/20/04 (0)
• Sway bar end link Bolt size - F.E. 18:58:59 11/19/04 (2)
  • Re: Sway bar end link Bolt size - Karl in KS 04:28:38 11/20/04 (1)
    • it's 8mm which is ~ 5/16" - Peter Florance 15:17:38 11/21/04 (0)
• Rear Wheel Bearings - john 16:00:19 11/19/04 (1)
  • Re: Rear Wheel Bearings - Steve Haygood 14:52:11 11/21/04 (0)
• Paging: Adam Save your $$ on B-Frahey crank Assem - Misha 11:22:35 11/19/04 (4)
  • Re: Paging: Adam Save your $$ on B-Frahey crank Assem - Eric Q 15:03:38 11/19/04 (1)
    • mine fell off again on friday - Peter Florance 16:10:30 11/22/04 (0)
  • too late, it's already purchased and at the shop - Adam Wilson in Chicago 11:32:43 11/19/04 (1)
    • Hey, not a big deal either way.... - Misha 15:58:36 11/19/04 (0)
• Take a look at this e12 - Bill Hynes 11:06:37 11/19/04 (3)
  • one for sale is from this board - papajimmm nh 15:25:52 11/19/04 (0)
  • Re: Take a look at this e12 - j. kingman 12:35:33 11/19/04 (1)
    • For sale? How much? - Tulsa Dave 12:46:41 11/19/04 (0)
• Need Parts for Motronic 3.5 conversion - TREVOR 09:33:21 11/19/04 (5)
  • Re: Need Parts for Motronic 3.5 conversion - brett 13:59:12 11/19/04 (2)
    • Re: Need Parts for Motronic 3.5 conversion - trevor 19:20:15 11/19/04 (1)
      • Question? - Nick in Co Springs 10:07:15 11/22/04 (0)
  • both - ...tom 10:18:44 11/19/04 (1)
    • Re: both - trevor 19:25:08 11/19/04 (0)
• Thermostat Area Big Leak Problem - Tomas Tupy 08:27:54 11/19/04 (2)
  • It was the WATER PUMP - Tomas Tupy 22:51:10 11/19/04 (0)
  • Broken bolt - Bill Hynes 10:09:51 11/19/04 (0)
• Puff of white smoke under hard motorway accel..... - Mango 08:04:30 11/19/04 (0)
• About those E9 Wheels - John in Simi Valley 06:23:24 11/19/04 (4)
  • Re: About those E9 Wheels - Velocewest 09:55:16 11/19/04 (3)
    • Would be Neat if - John in Simi Valley 11:21:02 11/19/04 (2)
      • RATS! ---> Report from the Wheel Front - John in Simi Valley 00:38:36 11/21/04 (1)
        • PATIENTS ?? - Jeff (Atlanta) 09:17:55 11/21/04 (0)
• follow-up, do your front subframe bolts look like - Adam Wilson in Chicago 19:18:30 11/18/04 (0)
• Do YOUR motor mounts look like this? (pic) - Adam Wilson in Chicago 19:18:15 11/18/04 (6)
  • An Alternate Route...... - Misha 11:13:58 11/19/04 (1)
    • Urethane mounts? - Nick in Co Springs 10:12:35 11/22/04 (0)
  • until last week - greghill-phx,az 22:18:12 11/18/04 (3)
    • soft mounts can let the fan hid the rad... (nt) - Velocewest 18:03:43 11/19/04 (0)
    • Not sure about the radiator, but... - Tulsa Dave 05:11:28 11/19/04 (1)
      • especially if it's a 31mm Korman swaybar! (nt) - Adam Wilson in Chicago 07:23:34 11/19/04 (0)
• WTB 8mm ignition wires set??? - Steve 13:40:55 11/18/04 (6)
  • Re: WTB 8mm ignition wires set??? - Troy Rudolph 20:57:33 11/18/04 (0)
  • You can if you want... - Mike W. 19:18:55 11/18/04 (1)
    • I'm with Mike on this - Karl in KS 04:40:55 11/20/04 (0)
  • Or, save a $ or $$ - Velocewest 14:45:22 11/18/04 (0)
  • Bavarian Auto - Dan Lafley 14:25:03 11/18/04 (1)
    • And here the link i forgot..... - Dan Lafley 14:26:06 11/18/04 (0)
• FS: Plug Wires, rotor and ICM $25 delivered. - TCD 11:48:27 11/18/04 (6)
  • Sold. - TCD 16:14:02 11/18/04 (0)
  • I C M ??? what in the world is this. . ? - Jaime Obando 12:32:37 11/18/04 (4)
    • L-jet acronyms 200 - Velocewest 13:13:28 11/18/04 (3)
      • That's an Initialism - Lou in Denver 15:07:08 11/18/04 (1)
        • Or an abbrv. ;-) (nt) - Velocewest 17:02:34 11/18/04 (0)
      • Do you take pay pal? are these used or new parts? - Jaime Obando 13:29:58 11/18/04 (0)
• Looking for a flywheel but its gotta be cheap - Misha 11:24:51 11/18/04 (1)
  • yes, but i'll have to check on the bolts - ...tom 04:28:04 11/19/04 (0)
• AFM - Carlos Careaga 09:57:57 11/18/04 (3)
  • E-Mail Me, Let's Talk - John in Simi Valley 05:47:13 11/19/04 (2)
    • Re: E-Mail Me, Let's Talk - Carlos Careaga 05:53:06 11/19/04 (1)
      • Great! If nothing else you can . . . - John in Simi Valley 06:30:27 11/19/04 (0)
• Lowering the front suspension w/coilovers???? - Steve 08:29:45 11/18/04 (7)
  • Re: Lowering the front suspension w/coilovers???? - Velocewest 11:14:50 11/18/04 (0)
  • why not discuss it online? - Adam Wilson in Chicago 09:02:55 11/18/04 (5)
    • Re: why not discuss it online? - Peter Florance 18:16:11 11/18/04 (4)
      • coil overs comments - The Rev. Brendan X 19:07:58 11/18/04 (3)
        • Only go the coilover route - Karl in KS 04:51:25 11/20/04 (0)
        • Re: coil overs comments - Peter Florance 03:04:41 11/19/04 (1)
          • Re: coil overs comments - The Rev. 04:30:54 11/19/04 (0)
• Carbs problems Zenith HELP??? - Steve 08:09:44 11/18/04 (1)
  • Zenith HELP link - Velocewest 11:18:34 11/18/04 (0)
• Coolant leaking fast at thermostat area, HELP!!! - Tomas Tupy 18:47:34 11/17/04 (2)
  • Be careful... - Mike W. 19:31:40 11/17/04 (0)
  • Re: Coolant leaking fast at thermostat area, HELP!!! - mattp 19:11:41 11/17/04 (0)
• Looking for Jaime Obando 's email have picts for y - ken 11:54:00 11/17/04 (1)
  • Re: Looking for Jaime Obando 's email have picts for y - Jaime Obando 19:30:06 11/17/04 (0)
• Anybody Have CarFax Available? - Jim Davis 21:42:02 11/16/04 (1)
  • E-mail me the VIN off-post, more... - Jeff Olson 12:00:24 11/17/04 (0)
• Lars or others in Oregon>>> - Craig in Davis 19:45:17 11/16/04 (6)
  • iaibmwsp? - Troy Rudolph 21:16:18 11/16/04 (3)
    • Wow, cool info thanks Troy. - Craig in Davis 22:15:28 11/16/04 (2)
      • iaibmwsp ... - Troy Rudolph 18:16:39 11/17/04 (0)
      • Your friend is closest to the Eugene Shop, but - Lars Olbimmerguy 05:36:59 11/17/04 (0)
  • Tough one.. unless somebody else knows >> - Lars Olbimmerguy 21:09:08 11/16/04 (1)
    • Thanks Lars eom - Craig in Davis 22:16:24 11/16/04 (0)
• re: 5er Fest 05 info and suggestions. - Brian da Parts Pimp 19:11:15 11/16/04 (0)
• Free - dead 528i on streets of San Francisco - Peter C 17:32:22 11/16/04 (1)
  • So did anyone on the board end up > - Craig in Davis 12:22:36 11/17/04 (0)
• Check Page 118 of the Latest Roundel - Jim Davis - 5er Fest 2005 Treasurer 15:38:20 11/16/04 (0)
• Rebuilding E12 Bilstein Sport shocks, More... - Jeff Olson 14:15:05 11/16/04 (11)
  • Re: Rebuilding E12 Bilstein Sport shocks, More... - Rick 19:45:48 11/16/04 (5)
    • Just the REAR Sport shocks are NLA, More... - Jeff Olson 12:06:27 11/17/04 (2)
      • Re: Just the REAR Sport shocks are NLA, More... - Rick 19:55:15 11/17/04 (0)
      • Whatever is left, are with suppliers , , , , maybe - Jeff (Atlanta) 14:42:43 11/17/04 (0)
    • Just because BMP lists's a part.... .doesn't mean - Frank H 20:15:33 11/16/04 (1)
      • Re: Just because BMP lists's a part.... .doesn't mean - Rick 04:05:11 11/17/04 (0)
  • Also ... - Troy Rudolph 15:34:23 11/16/04 (3)
    • Not to open a can of worms, HD's vs. Sports... - Jeff Olson 15:54:55 11/16/04 (2)
      • Bilstein Factory Eng/Sales Comment.... - JR 17:33:42 11/18/04 (0)
      • I wonder if Eibachs are short enough - Peter Florance 05:06:01 11/18/04 (0)
  • Bilstein address/phone number/website... - Jeff Olson 15:10:58 11/16/04 (0)
• Secret Camshafts again - Bert-Ola 13:38:45 11/16/04 (1)
  • Also marked "112A" - Bert-Ola 13:48:17 11/16/04 (0)
• Cam lift and duration - Michael R from Melbourne 13:04:10 11/16/04 (0)
• don't respond to post below - Peter Florance 07:16:48 11/16/04 (0)
• - Do you know me? 06:51:47 11/16/04 (1)
  • complaint sent to ezzi.net - Peter Florance 07:37:09 11/16/04 (0)
• Looking for better brake pads - Big Dog 06:34:40 11/16/04 (4)
  • Re: Looking for better brake pads - Bill Bowes 18:36:43 11/16/04 (0)
  • Check out Porterfield - Velocewest 16:59:36 11/16/04 (0)
  • Found some interesting info - Big Dog 08:18:01 11/16/04 (0)
  • Doesn't Hawk Make e12 pad (like e28 M5) - Peter Florance 06:50:24 11/16/04 (0)
• Damn - Drew 22:33:26 11/15/04 (1)
  • Re: Damn - mattp 19:14:29 11/17/04 (0)
• Looks like a flood o' spam tonight... - Tulsa Dave 20:58:07 11/15/04 (0)
• e12 Dash on eBay - Wietse 19:16:26 11/15/04 (0)
• sway bar sizes - stewart in slc 17:17:03 11/15/04 (1)
  • 24mm front - 18mm rear... - Tulsa Dave 17:19:04 11/16/04 (0)
• Can I get Ellipsoid head lamps to work on my E12?? - Devin Calder 17:11:02 11/15/04 (1)
  • Look for ellipsoids from late 80's e24 6er - Velocewest 10:39:25 11/17/04 (0)
• Broken plastic clips used to secure taillights!! - Jared in S-W 11:38:19 11/15/04 (2)
  • Re: Broken plastic clips used to secure taillights - Karl in KS 15:49:53 11/15/04 (0)
  • Re: Broken plastic clips used to secure taillights!! - Brad In Texas 14:19:11 11/15/04 (0)
• What gas mileage should I be getting? 81 528iA - Jared in S-W 11:19:09 11/15/04 (4)
  • Re: What gas mileage should I be getting? 81 528iA - gary in West Oz 23:19:24 12/03/04 (0)
  • BMW Ad Says: - John in Simi Valley 20:42:48 11/20/04 (0)
  • Transmission? City/Hwy? One foot or both on the - Lars OBG 16:07:38 11/15/04 (1)
    • Varies a lot - Michael R from Melbourne 18:33:56 11/15/04 (0)
• Paging Robert Bondi-Upgrading Auxiliary Air Valve! - Jaime Obando 22:28:58 11/14/04 (3)
  • Mike W. has it covered... - Robert Bondi 20:50:14 11/15/04 (0)
  • More - Mike W. 11:03:08 11/15/04 (0)
  • see Mike W's reply to Neck Smith - Peter Florance 04:39:57 11/15/04 (0)
• Please Help-Upgrading to new Auxiliary Air Valve! - Jaime Obando 22:26:58 11/14/04 (2)
  • Re: Please Help-Upgrading to new Auxiliary Air Val - Karl in KS 16:10:32 11/15/04 (1)
    • I've decided to stay with the old Jules Verne.. . - Neck Smith 20:47:31 11/15/04 (0)
• Just testing a picture link - Michael R from Melbourne 19:37:09 11/14/04 (10)
  • Ahhh , , , beautiful Summer - Jeff (Atlanta) 21:35:10 11/14/04 (2)
    • That looks to me... - Mike E 22:44:21 11/14/04 (2)
      • Thats the place - Michael R from Melbourne Torquay 02:02:58 11/15/04 (0)
  • Re: Just testing another picture link - Michael R from Melbourne 19:40:32 11/14/04 (6)
    • Re: Just testing another picture link - Gerry ACT/Oz 20:41:26 11/14/04 (1)
      • Strange thing the web - Michael R from Melbourne 02:11:29 11/15/04 (0)
    • Re: Just testing yet another picture link - Michael R from Melbourne 19:43:19 11/14/04 (3)
      • Now it's "Car of the day" - Michael R from Melbourne 19:54:38 11/14/04 (2)
        • The Preston 528i - Remy Davison 00:03:30 11/16/04 (0)
        • I know were that picture was taken. - Al from Oz 15:40:39 11/15/04 (0)
• Need used front sport shocks (Bilsteins!), More... - Jeff Olson 18:49:15 11/14/04 (9)
  • shox.com has Bilstein sport front.. - Art in CA 17:29:32 11/15/04 (0)
  • Where do you guys get good Prices for parts !! - Andres Moreno 14:46:10 11/15/04 (6)
    • secret: do the install yourself.. - Art in CA 17:31:58 11/15/04 (0)
    • Re: Where do you guys get good Prices for parts !! - Jeff (Atlanta) 15:48:36 11/15/04 (4)
      • Bilstein is worth it - Velocewest 15:51:56 11/15/04 (3)
        • Bilstein warranty, more - Steve Haygood 16:38:56 11/15/04 (2)
          • Re: Bilstein warranty, more - Velocewest 15:15:09 11/17/04 (1)
            • Bilstein warranty, good after 18 years - JR 19:03:05 11/18/04 (0)
  • Re: Need used front sport shocks (Bilsteins!), Mor - Kaveman 20:59:31 11/14/04 (0)
• Do E9 Wheels fit E12? - John in Simi Valley 15:08:56 11/14/04 (5)
  • Re: Do E9 Wheels fit E12? - Troy Rudolph 18:27:31 11/14/04 (2)
    • Stock e9 alloys are et22 6x14 - Velocewest 08:50:59 11/15/04 (5)
      • I like them better... - Mike E 15:38:27 11/15/04 (0)
  • Not sure how accurate this is, but I was told - Lars Olbimmerguy 16:49:24 11/14/04 (0)
  • They should. - Al from Oz 15:56:04 11/14/04 (1)
    • Re: HEEEEELP!!! - Niamh Dickens 03:09:31 11/30/04 (0)
• Auxiliary Air wire harness Emergency Question !! - Neck Smith and Jaime Obando 14:52:13 11/14/04 (4)
  • Re: FS: 1980 528i on eBay close to me - Liz Bryan 03:10:15 11/30/04 (0)
  • Re: Auxiliary Air wire harness Emergency Question - Mike W. 18:14:27 11/14/04 (2)
    • Explain it to me like a 6 year old. . - Jaime Obando 05:58:16 11/15/04 (1)
      • Acronym 101 - Velocewest 12:47:58 11/15/04 (0)
• Parts for sale B/O takes - ken 10:46:23 11/14/04 (2)
  • Re: European bumpers - John Parker 04:12:29 11/22/04 (0)
  • Got any pictures.. - Jaime Obando 13:28:09 11/14/04 (0)
• Attn e12 enthusiasts Re: caravans for 5erFest 2005 - booker535 10:33:03 11/14/04 (3)
  • Re: caravans for 5erFest - Karl in KS 15:58:31 11/15/04 (2)
    • Re: Re: caravans for 5erFest - Tulsa Dave 06:49:46 11/16/04 (0)
    • I wouldn't mind driving through Kansas... - Eric Q 17:57:12 11/15/04 (0)
• Those Euro Bumpers Again...I Like the Look - Canada Karl 09:48:41 11/14/04 (2)
  • You may need to drill a couple of hole in frame - Misha 10:36:32 11/15/04 (0)
  • Re: Those Euro Bumpers Again...I Like the Look - Ryan Bryan 07:51:24 11/15/04 (0)
• Didn't need my ashtray, so I got rid of it... - Bill Hynes 08:31:02 11/14/04 (7)
  • I used the space - Karl in KS 16:02:04 11/15/04 (0)
  • Really excellent looking job , , , , , , but , , , - oilslick 14:31:09 11/14/04 (0)
  • Re: Didn't need my ashtray, so I got rid of it... - Jim 14:27:29 11/14/04 (0)
  • I need one of those radios to kick this damn habit - Jaime Obando 13:33:46 11/14/04 (3)
    • Re: Lubin' - Jack Norris 09:06:33 11/26/04 (0)
    • Kick it! - Nate in Utah 17:16:29 11/22/04 (0)
    • Re: I need one of those radios to kick this damn habit - Bill Hynes 15:22:15 11/14/04 (0)
  • Thats Awsome! - Dan Lafley 12:02:32 11/14/04 (1)
• 320i C-Runner question ,,,,,,,,,,,,, - Jeff (Atlanta) 07:29:12 11/14/04 (7)
  • Re: Stuck Door - Al Mullins 10:57:05 11/26/04 (0)
  • Re: Stuck Door - Lesley Mary 07:27:33 11/22/04 (0)
  • Re: Stuck Door - Rob Urban 15:49:36 11/15/04 (1)
    • SPAM above... - Velocewest 15:53:04 11/15/04 (0)
  • it does not hurt it. - Sam Schultz 08:15:37 11/14/04 (3)
    • Re: 3 more combos - Dolly Ray 10:09:02 11/22/04 (0)
    • I smiled when I had my M535i , , , now I take , , - Jeff (Atlanta) 14:24:25 11/14/04 (1)
      • That car is still putting smiles on my face... - Tulsa Dave 06:58:01 11/15/04 (0)
• e12 on west coast - Chris Hollis 06:19:07 11/14/04 (0)
• BMW Featured on "Fine Living" - Rick 05:45:57 11/14/04 (0)
• How do you include a picture in a post message? - Andres Moreno 03:14:49 11/14/04 (1)
  • Re: How do you include a picture in a post message? - Troy Rudolph (Webmaster) 06:40:16 11/14/04 (4)
• 16" Alpina Wheels For Sale - SE 02:24:12 11/14/04 (0)
• Can E30 Hella Ellipsoid lights work on E12 - Jerry Baldwin in Vermont 18:34:41 11/13/04 (4)
  • Re: '77 530i (eom) - Laura Hill 13:23:44 11/26/04 (0)
  • Re: Can E30 Hella Ellipsoid lights work on E12 - Will Ollison 07:20:13 11/14/04 (3)
    • Re: Can E30 Hella Ellipsoid lights work on E12 - Jerry Baldwin in Vermont 09:04:44 11/14/04 (1)
      • Im Using them in a E34 - Will Ollison 14:39:13 11/14/04 (0)
• having a blastydriving my e12 in germany - brian 14:46:42 11/13/04 (2)
  • Re: having a blastydriving my e12 in germany - chucknc 16:52:30 11/13/04 (1)
    • "y'all US army are always in my prayers" - Jaime Obando 02:53:52 11/14/04 (4)
• Need right rear tail light assembly (exterior) - Steve G 14:43:08 11/13/04 (4)
  • Re: Need right rear tail light assembly (exterior) - spilmacher 11:26:03 11/14/04 (1)
    • compaint sent Level3 - Peter Florance 09:19:22 11/17/04 (0)
  • Re: Need right rear tail light assembly (exterior) - Mike W. 14:58:37 11/13/04 (0)
  • Re: Need right rear tail light assembly (exterior) - brian in germany 14:48:32 11/13/04 (3)
    • Re: '77 530i (eom) - Erny Jamie 10:52:13 11/22/04 (0)
    • Re: '77 530i (eom) - Lesley McEvoy 15:10:37 11/15/04 (0)
• Suspension trouble Help! - F.E 14:06:17 11/13/04 (6)
  • Re: Suspension trouble Help! - F.E. 15:03:16 11/14/04 (2)
    • Re: radiators really long - Aoife Flight 04:37:43 11/22/04 (0)
  • Put it in a vise and use channel locks or pipe , , - Jeff (Atlanta) 18:00:12 11/13/04 (2)
    • agreed, vise grips worked fine for me - Adam Wilson in Chicago 08:59:19 11/14/04 (2)
      • I meant a "Bench Vice", but what the hell ? - Jeff (Atlanta) 14:32:58 11/14/04 (0)
  • We use 18 inch cannel locks more inside - Sam SChultz 15:26:06 11/13/04 (0)
  • big pipe wrench - Karl in KS 14:18:15 11/13/04 (0)
• '77 530iA For Sale - No Affiliation - Rick 12:27:42 11/13/04 (0)
• Classified Link/Page is not working . . . ???? - Jeff (Atlanta) 11:53:48 11/13/04 (6)
  • Just tested it. Worked OK for me. (eom) - Troy Rudolph (Webmaster) 13:00:21 11/13/04 (5)
    • Probably operator error -- works for me now - Jeff (Atlanta) 18:01:53 11/13/04 (4)
      • We call that PEBKAC - Mike E 07:10:27 11/14/04 (5)
        • Re: Power deal - Dianne Vannoy 13:42:28 11/26/04 (0)
        • PEBKF(fingers)AC Good one and , , , , - Jeff (Atlanta) 07:52:29 11/14/04 (1)
          • LOL (nt) - F.E. 15:05:22 11/14/04 (0)
      • PICNIC - ChuckNC 23:10:33 11/13/04 (0)
• Mystery valve seat - Matt D UK 11:49:52 11/13/04 (6)
  • Re: Leaking Fuel - Overflow - Kathline Kirk 21:09:46 11/26/04 (0)
  • Re: Mystery valve seat - Mike W. 14:55:12 11/13/04 (1)
    • Re: Mystery valve seat - matt D 04:53:44 11/14/04 (2)
      • Re: Rover 426 Si Baujar 1996 - Rob Harmon 21:42:57 11/29/04 (0)
      • Re: Rover 426 Si Baujar 1996 - Megan Riesz 15:01:47 11/15/04 (0)
• Paging Tarazona to the White Courtesy Phone... - Brian in Oxnard (was Brian in Abilene) 09:48:16 11/13/04 (0)
• Mitch in Huntington Beach YGM - RonP 08:31:17 11/13/04 (2)
  • Re: More AC evaporator/expansion valve info (long) - Jessica Adam 02:47:00 11/30/04 (0)
  • Re: More AC evaporator/expansion valve info (long) - Niamh Howington 04:10:23 11/22/04 (0)
• connector plug - Karl in KS 05:07:41 11/13/04 (2)
  • If they look like the injector plugs . . . - Bob/E12/6er 10:41:25 11/15/04 (0)
  • Re: connector plug - Peter Florance 07:51:03 11/13/04 (0)
• Please coment on: Strut Insert Turbo TS Boge - Neck Smith 00:06:39 11/13/04 (4)
  • good quality shocks - Steve Haygood 09:47:49 11/14/04 (1)
  • Re: Please coment on: Strut Insert Turbo TS Boge - Jeff (Atlanta) 11:23:20 11/13/04 (2)
  • Re: Please coment on: Strut Insert Turbo TS Boge - Peter Florance 07:46:43 11/13/04 (0)
  • Importec has them.. . Get the shipping free~~ - Jaime Obando 00:10:37 11/13/04 (2)
• Valve Adjustment - Advice on GAP-Any Parts Needed? - Andres Moreno Houston, TX 00:02:56 11/13/04 (7)
  • Re: Valve Adjustment - Advice on GAP-Any Parts Needed? - Peter Florance 08:27:51 11/13/04 (6)
    • thank you Peter! Can I replace the valve seals? - Andres Moreno 13:47:44 11/13/04 (5)
      • valve job - Karl in KS 14:13:34 11/13/04 (4)
        • Not quite, but close enough - Mike W. 14:48:01 11/13/04 (6)
          • while head is out-what else is crucial to do to it - Neck Smith 03:05:40 11/14/04 (2)
            • It's nice to... - Mike W. 18:24:02 11/14/04 (0)
            • replace rusty old bolts-nuts from exhaust manifold - Jaime Obando 03:31:03 11/14/04 (0)
• Megasquirt/M30 question: - Justin in C'ville 18:51:57 11/12/04 (3)
  • Re: Megasquirt/M30 question: - Peter Florance 07:53:30 11/13/04 (0)
  • Re: Megasquirt/M30 question: - Troy Rudolph 20:08:00 11/12/04 (3)
    • I plan on retaining the motronic - Justin in C'ville 20:19:46 11/12/04 (0)
• What fluid do I use in my tranny? and were to get? - Jerry Baldwin in Vermont 17:22:09 11/12/04 (10)
  • Redline MTL .. - Troy Rudolph 09:20:59 11/13/04 (0)
  • Re: What fluid do I use in my tranny? and were to get? - Jeff (Atlanta) 18:22:58 11/12/04 (11)
    • What about Mobil 1 In the diff? - Jerry Baldwin in Vermont 21:32:51 11/12/04 (7)
      • No, not a good choice - Mike W. 15:02:46 11/13/04 (1)
        • Re: 77' 530i FOR SALE!!! - Edward Schneider 10:52:03 11/22/04 (0)
      • I think synthetic GL5 are ok but - Peter Florance 07:57:45 11/13/04 (0)
      • ???????????????? - Jeff (Atlanta) 23:08:19 11/12/04 (4)
        • Re: Mobil 1 - Will Ollison 12:38:48 11/13/04 (2)
        • Re: Mobil 1 - Will Ollison 12:38:41 11/13/04 (0)
        • What premium fluid is recomended on an Auto-Tranny - Jaime Obando 23:37:51 11/12/04 (1)
          • Redline ATF - Troy Rudolph 09:24:20 11/13/04 (0)
• I have a set of used Alpina rear springs... - Jeff Olson 17:17:15 11/12/04 (0)
• 75 530IA curious about whereabouts - Patrick Goss 13:48:00 11/12/04 (2)
  • Re: 75 530IA curious about whereabouts - Pete in Maryland 19:02:06 11/12/04 (1)
    • Re: 75 530IA curious about whereabouts - Patrick Goss 07:34:05 11/15/04 (0)
• m-car test - james 22:59:27 11/11/04 (8)
  • yep, I bought that issue. - Adam Wilson in Chicago 06:32:26 11/12/04 (0)
  • Re: m-car test - Chris Hollis 04:56:38 11/12/04 (1)
    • nope, totally inaccurate - Adam Wilson in Chicago 06:34:53 11/12/04 (0)
  • ouch! - Peter Florance 04:37:34 11/12/04 (4)
    • this is bliss! - james 11:30:05 11/12/04 (3)
      • I have that Tiff video, hilarious - Adam Wilson in Chicago 11:37:03 11/12/04 (2)
        • yeah - love the Tiff video - james 06:00:39 11/13/04 (1)
          • Where do I find the Tiff video ??? + e12 picture - Niklas Edlund - Motronic E12 12:16:25 11/17/04 (0)
• Thermal reactors - Bruce in Seattle 22:22:22 11/11/04 (3)
  • Re: Thermal reactors - Mitch in Huntington Beach 22:08:48 11/12/04 (0)
  • Cracked Head - Dan Lafley 10:58:57 11/12/04 (1)
    • Re: MUFFLER - Lyn Terry 11:03:00 11/22/04 (0)
• Thermal reactors - Bruce in Seattle 22:18:04 11/11/04 (0)
• Paging Brian in Calgary - Jared in S-W 20:22:42 11/11/04 (1)
  • Drop me an email.... - Brian in Calgary 20:40:04 11/11/04 (0)
• 2.8 3.5 conversion - Brett 19:10:03 11/11/04 (8)
  • Re: 2.8 3.5 conversion - Mitch in Huntington Beach 22:25:32 11/12/04 (2)
    • Re: 2.8 3.5 conversion - Troy Rudolph 09:27:43 11/13/04 (1)
      • Re: 2.8 3.5 conversion - Brett 06:16:29 11/16/04 (0)
  • The write up won't completely work for an '89 - Nick in Co Springs 17:59:10 11/12/04 (3)
    • Re: The write up won't completely work for an '89 - Brett 06:02:59 11/16/04 (0)
    • my '91 - Karl in KS 05:15:06 11/13/04 (3)
      • Re: Idle Screw still not responding - Val Javan 16:41:44 11/26/04 (0)
      • Re: Idle Screw still not responding - Ernist OHara 04:36:21 11/22/04 (0)
      • Re: my '91 - Brett 06:05:29 11/16/04 (0)
  • There's a great writeup in the Tech FAQ section! - Bob/E12/6er 08:29:09 11/12/04 (0)
• Paging Sam - Rami 15:31:35 11/11/04 (3)
  • Re: Few more thoughts on a/c - Aoife Pamela 03:02:45 11/30/04 (0)
  • Re: Few more thoughts on a/c - Judy Bailey 18:48:05 11/26/04 (0)
  • Re: Few more thoughts on a/c - Ronny Curtis 08:57:38 11/26/04 (0)
• Remy Davison, please contact me off line! - Bob/E12/6er 13:01:51 11/11/04 (0)
• Installing Front Bilstein Strutts-Mentoring needed - Andres Moreno 10:36:50 11/11/04 (9)
  • Spring Pads and Mounts - Tom 76 630CS 09:08:47 11/12/04 (1)
    • Adam mentioned the mounts... - Tulsa Dave 16:08:57 11/12/04 (2)
      • Re: Rear suspension project...Sealed wheel bearings?? - Sarah Brown 02:40:48 11/30/04 (0)
      • Re: Rear suspension project...Sealed wheel bearings?? - Betty Milborn 04:44:46 11/26/04 (0)
  • easy to do.. - Art in CA 20:03:18 11/11/04 (2)
  • Link - Mike E 13:50:47 11/11/04 (3)
    • Re: towing w/E12 - Tibby Jordanger 16:47:35 11/15/04 (0)
  • An alternate... - Tulsa Dave 12:50:18 11/11/04 (2)
    • adendum - ...tom 14:01:56 11/11/04 (1)
      • It's coming back to me now... - Tulsa Dave 14:22:45 11/11/04 (1)
        • Re: 528i for sale - Crissy Jensen 06:03:56 11/26/04 (0)
  • just did it this weekend - Adam Wilson in Chicago 10:59:28 11/11/04 (0)
  • Re: Installing Front Bilstein Strutts-Mentoring needed - Peter Florance 10:49:39 11/11/04 (0)
• Brake Pads-Rubber Brake lines-Dot 4 Brake Fluid. - Neck Smith 10:29:30 11/11/04 (1)
  • Dot 4 a must with E12 - Peter Florance 10:50:15 11/11/04 (0)
• Push Button- Starter Switch! - Jaime Obando 10:22:35 11/11/04 (10)
  • Re: Should be HP condensor - Bess Crothers 04:03:45 11/30/04 (0)
  • Do you have details of the install? (nt) - Brian in Calgary 10:46:32 11/11/04 (6)
    • Re: Dyeing black leather seats? - Jessy Harmon 20:54:17 11/29/04 (0)
    • Details-installation of Push Button Start Switch. - Jaime Obando 18:42:03 11/11/04 (5)
      • Re: Throttle Bypass Screw does nothing. - Patricia Watson 22:19:22 11/29/04 (0)
      • Re: Throttle Bypass Screw does nothing. - Stephen Hoss 11:13:20 11/26/04 (0)
      • Very Cool.... Look forward to pics. (nt) - Brian in Calgary 20:37:31 11/11/04 (0)
    • Push Button- Starter Switch! Installation Details - Jaime Obando 15:47:17 11/11/04 (4)
    • Push Button- Starter Switch! Installation Details - Jaime Obando 15:46:13 11/11/04 (2)
      • Re: towing w/E12 - Fanny Clawson 01:47:24 11/30/04 (0)
      • Re: towing w/E12 - Helen Turner 11:07:20 11/26/04 (0)
    • Re: Do you have details of the install? (nt) - Jaime Obando 15:44:34 11/11/04 (0)
• Paging Rob Anderson...need HELP!!! - Steve 06:28:40 11/11/04 (0)
• achromonohraf - achromonohraf 05:52:28 11/11/04 (0)
• Questions on porting my heads - Rami 22:39:27 11/10/04 (2)
  • Re: Questions on porting my heads - Rick 01:57:19 11/11/04 (1)
    • Make sure they have done BMW heads before. - Sam 05:04:21 11/11/04 (0)
• Good-sounding '81 528i FS in Melb, Australia - Remy Davison 21:19:43 11/10/04 (2)
  • Seen it (already!) - Michael R from Melbourne 00:40:56 11/11/04 (1)
    • Thanks Mike - same colour as my E12/8 - Remy Davison 19:34:58 11/11/04 (0)
• ECU's for diagnostics, Wheels - Al Taylor 20:26:05 11/10/04 (3)
  • Re: ECU's for diagnostics, Wheels - carlos 09:47:56 11/18/04 (0)
  • Re: ECU's for diagnostics, Wheels - Dusan Vacval 05:39:32 11/11/04 (0)
  • Michael R - a 3.5 ecu... - Mike E 23:31:29 11/10/04 (0)
• What is this noise - Jerry Baldwin in Vermont 20:16:44 11/10/04 (3)
  • input shaft bearing in tranny ? try adding moly - marc79euro645 20:07:58 11/11/04 (2)
    • syncro's? - Peter Florance 07:56:15 11/13/04 (0)
    • Re: input shaft bearing in tranny ? try adding moly - Jerry Baldwin in Vermont 16:46:27 11/12/04 (0)
• Need help fine tuning E12 - ET57 19:40:45 11/10/04 (2)
  • Re: Need help fine tuning E12 - Dieter 23:55:06 11/10/04 (0)
  • Timing could be way out... - Mike E 20:08:04 11/10/04 (0)
• What represents the extra weight of earlier e12's? - Rick 17:31:23 11/10/04 (4)
  • Re: What represents the extra weight of earlier e12's? - Ryan Bryan 04:23:28 11/11/04 (0)
  • One was thicker glass as noted on site.... - Lars OBG 22:03:35 11/10/04 (4)
  • How it was measured - Mike W. 21:21:06 11/10/04 (1)
    • Same with E28s - Remy Davison 21:38:25 11/10/04 (0)
• Dashboard on fleabay!! - Jared in S-W 15:50:31 11/10/04 (3)
  • Re: Dashboard on fleabay!! - Damien in Sydney 15:55:42 11/10/04 (0)
  • Re:Anyone in South Carolina need a parts car? - Same as above 15:55:06 11/10/04 (1)
    • So they did make-em in black. Cool - Misha 18:40:43 11/10/04 (0)
• Good combo relay, injectors still cutting out - Jared in S-W 08:05:28 11/10/04 (7)
  • Re: New addition to www.e12.de by me - Edie Evans 15:04:17 11/15/04 (0)
  • do you have a known, good ECU to try? - Adam Wilson in Chicago 09:01:41 11/10/04 (5)
    • Re: No I dont...........(more) - Jared in S-W 09:50:34 11/10/04 (4)
      • it's either feast or famine for those things - Adam Wilson in Chicago 10:04:05 11/10/04 (3)
        • Re: is there any way to test the ECU? nt - Jared in S-W 15:43:47 11/10/04 (2)
          • I have a couple of ECUs - Brian in Calgary 19:01:48 11/10/04 (1)
            • Here are the part #'s - Brian in Calgary 21:13:07 11/10/04 (0)
• 5er Fest 2005 - 5er Fest 2005 Event Team 07:13:43 11/10/04 (0)
• Guibo questions (late 81 5spd) - Peter Florance 04:37:54 11/10/04 (7)
  • Re: 77 530i for sale - Margaret Barr 08:41:39 11/22/04 (0)
  • Re: Guibo questions (late 81 5spd) - Jeff (Atlanta) 15:01:00 11/10/04 (0)
  • Re: Guibo questions (late 81 5spd) - Don Daynes 09:01:21 11/10/04 (3)
    • link did not show up - Don Daynes 09:02:50 11/10/04 (2)
      • thanks - must lead off with http:// - Peter Florance 10:03:05 11/10/04 (0)
      • Link function not working. NM - Don Daynes 09:03:49 11/10/04 (0)
  • Re: Guibo questions (late 81 5spd) - Jeff C 07:02:38 11/10/04 (0)
• Paging Peter Florance - Mike W. 21:23:33 11/09/04 (3)
  • geez I forgot - Peter Florance 04:06:20 11/10/04 (2)
    • I'll take a look, but - Mike W. 21:26:44 11/10/04 (1)
      • defeats the purpose - Peter Florance 07:06:07 11/11/04 (0)
• wheel fitment...more info - eric in denver 14:41:29 11/09/04 (7)
  • Re: wheel fitment...more info - Big Dog 08:09:01 11/10/04 (0)
  • I think they will work... - Ryan Bryan 06:16:18 11/10/04 (0)
  • Re: wheel fitment...more info - jim at da shop 17:03:42 11/09/04 (3)
    • rubbing? - eric in denver 19:14:53 11/09/04 (1)
      • Re: rubbing? - oilslick 20:24:55 11/09/04 (1)
  • Re: wheel fitment...more info - Jeff (Atlanta) 17:03:31 11/09/04 (0)
  • that was 8J*16*H2 IS 23 - eric in denver 14:43:12 11/09/04 (0)
• Atlanta BMW Concours this Sunday - Bruce Herstowski 06:58:01 11/09/04 (0)
• Thanks to Sam Schultz - New Question - Tom 05:47:45 11/09/04 (1)
  • Re: Thanks to Sam Schultz - New Question - eric in denver 17:01:16 11/09/04 (0)
• Loud engine noise - Hans V. 01:11:28 11/09/04 (8)
  • Not the power steering pump is it? - Remy Davison 21:58:58 11/09/04 (0)
  • Mine Does athat too! - Dan Lafley 08:14:37 11/09/04 (5)
    • Re: Mine Does athat too! - Dieter 21:16:45 11/09/04 (5)
      • Re: getrag 265's, is reverse always synchronized? - Ernest Wagner 04:24:58 11/26/04 (0)
      • Found the fault! Leaking intake. - Hans V. 00:49:12 11/10/04 (3)
        • Have you fitted the longer intakes from a 320i - Michael R from Melbourne 19:31:01 11/10/04 (3)
          • Re: Cool BMW Screensaver for free. (Merry Christmas) - Leslie South 04:02:48 11/22/04 (0)
          • Re: Have you fitted the longer intakes from a 320i - Hans V. 01:18:24 11/11/04 (0)
          • Maybe 25Nm of torque extra on a 2.8? - Remy Davison 21:26:43 11/10/04 (0)
• stuck sun roof - gary in West Oz 23:41:51 11/08/04 (6)
  • Re: stuck sun roof - carlos 08:03:34 11/09/04 (5)
    • The US ones.... - Dan Lafley 20:34:01 11/09/04 (4)
      • Depending on the year... - Mike W. 20:59:18 11/09/04 (3)
        • Re: Depending on the year... - gary in west Oz 21:09:44 11/09/04 (2)
          • Re: Depending on the year... - Mike W. 21:27:15 11/09/04 (1)
            • Thanks, I'll look at mine too - Michael R from Melbourne 19:28:08 11/10/04 (0)
• Melbourne Mini Fest Sunday Dec 12th - Michael R from Melbourne 18:12:12 11/08/04 (1)
  • Will try, but unsure of dates right now - Remy Davison 21:37:11 11/09/04 (0)
• COTM - Just posted. Have a look - Troy Rudolph (Webmaster) 18:09:58 11/08/04 (6)
  • Thanks to all... - Lenny D. 21:23:37 11/10/04 (0)
  • Re: COTM - Just posted. Have a look - Chris Hollis 03:59:10 11/09/04 (4)
    • Re: BMW Fuel Pump F/S - Valerie Joynt 12:49:09 11/22/04 (0)
    • Beautiful 5er!!! That would be Cypress Green. - Bob/E12/6er 10:51:17 11/09/04 (2)
      • Great colour, Bob - Remy Davison 22:02:56 11/09/04 (1)
        • Thanks Remy! I've been to your site before! - Bob/E12/6er 09:01:53 11/10/04 (0)
  • I looked....very nice indeed! - Al from Oz 19:01:56 11/08/04 (0)
• Ideas on getting better combustion? Hotter spark? - Nate in Utah 17:44:16 11/08/04 (9)
  • Re: bigger brakes - Dorrie Strobl 00:08:18 11/30/04 (0)
  • Here are some more unusual things to check for - Big Dog 13:54:58 11/09/04 (0)
  • How do you guys know all this stuff? - Nate in Utah 12:00:12 11/09/04 (2)
    • Re: Answer... Size of stock swaybars - Matilda Smith 00:37:40 11/30/04 (0)
    • by hanging out here ;-) - Mike E 12:47:43 11/09/04 (0)
  • Re: Ideas on getting better combustion? Hotter spark? - Peter Florance 18:24:55 11/08/04 (4)
    • Re: Ideas on getting better combustion? Hotter spark? - Hans V. 01:01:13 11/10/04 (0)
    • I concur - also... - Mike E 22:38:19 11/08/04 (0)
    • Re: Ideas on getting better combustion? Hotter spark? - Nate in Utah 19:17:34 11/08/04 (1)
      • Re: Ideas on getting better combustion? Hotter spark? - Peter Florance 04:24:25 11/09/04 (0)
• Bosch wiring parts - Velocewest 14:02:20 11/08/04 (5)
  • There is a better product >M> - Dave_in_VA 17:56:32 11/08/04 (4)
    • The price is certainly better - Velocewest 19:02:52 11/08/04 (5)
      • Re: bigger brakes - Nancy Pamela 14:46:28 11/26/04 (0)
      • Re: bigger brakes - Margaret BarnHart 08:53:18 11/22/04 (0)
      • Yes they do - Peter Florance 04:23:06 11/09/04 (0)
      • Re: The price is certainly better - Dave_in_VA 19:17:21 11/08/04 (1)
        • I need Injector plugs and others too - Velocewest 15:53:44 11/09/04 (0)
• Misc Parts for sale B/O takes all - ken 09:58:47 11/08/04 (0)
• brand new BBS rear spoiler on ebay - Adam Wilson in Chicago 04:35:52 11/08/04 (0)
• //M535i front spoiler WTB - Michael R from Melbourne 21:16:07 11/07/04 (2)
  • ~100 euros on ebay.de - james 01:18:53 11/08/04 (0)
  • Change it. - Damien in Sydney 23:06:21 11/07/04 (4)
• parts WTB in Australia - please keep a look out - Michael R from Melbourne 20:58:53 11/07/04 (6)
  • Bumper - Mike E 01:17:29 11/08/04 (2)
    • Re: STIFFNESS of - Megan Hamby 10:50:58 11/22/04 (0)
    • Oops. darned browser cache... (nt) - Mike E 01:18:35 11/08/04 (0)
  • Bumper - Mike E 01:13:31 11/08/04 (0)
  • I thought you were selling, not keeping! - Remy Davison 22:44:43 11/07/04 (2)
    • Replaced the F-V? - Mike E 02:08:20 11/08/04 (1)
      • Selling - keeping ......I need to win the lottery - Michael R from from Melbourne 14:50:50 11/08/04 (0)
• Great progress this weekend, but I'm exhausted!! - Adam Wilson in Chicago 20:05:28 11/07/04 (7)
  • Re: 1977 BMW 530i FOR SALE - Florence Hornibrook 00:26:12 11/30/04 (0)
  • Re: Great progress this weekend, but I'm exhausted!! - Mitch in Huntington Beach 08:36:04 11/08/04 (0)
  • Awesome! I hope you'll be atending 5erFest. - TCD 04:53:16 11/08/04 (1)
    • yep, I'd like to - Adam Wilson in Chicago 05:59:22 11/08/04 (1)
      • Re: No Suspension? - Alan Williams 16:00:10 11/15/04 (0)
  • Hope you had a nice cold one to celebrate! - Brian in Calgary 20:41:33 11/07/04 (0)
  • oops, pic of springs - Adam Wilson in Chicago 20:06:56 11/07/04 (1)
    • Re: oops, pic of springs - T.Han 20:39:01 11/07/04 (0)
• Proper Running Temperature e12 528i '80 - MattP from Melbourne 17:42:18 11/07/04 (1)
  • That sounds pretty right - Remy Davison 22:38:30 11/07/04 (0)
• Great afternoon success - Jerry Baldwin in Vermont 16:24:31 11/07/04 (3)
  • It's a nice feeling, huh? - Adam Wilson in Chicago 19:51:45 11/07/04 (2)
    • Re: It's a nice feeling, huh? - Jerry Baldwin in Vermont 16:42:43 11/08/04 (1)
      • check under the FAQ section on this site - Adam Wilson in Chicago 21:28:23 11/08/04 (0)
• FS - Auto ---> Dog Leg 5-Speed Conversion - Releaf1 15:04:56 11/07/04 (1)
  • Check email - Jeff C 11:01:51 11/08/04 (0)
• Finished 530i FI upgrade - Gene S 13:22:11 11/07/04 (2)
  • Great! - Robert Bondi 18:23:54 11/07/04 (1)
    • Re: Great! - Gene S 15:26:17 11/08/04 (0)
• Bad Vibration - Need Help Please - john 08:23:05 11/07/04 (3)
  • Easy things first - John in Simi Valley 12:47:02 11/09/04 (0)
  • are the ujoints aligned front to back - Steve Haygood 16:26:31 11/07/04 (1)
    • I am not sure... - john 17:27:07 11/07/04 (0)
• Sold My ZF 3HP22 - Tomas Tupy 21:58:04 11/06/04 (1)
  • Good - John in Simi Valley 23:54:43 11/06/04 (0)
• Looking for F.E. - ken 18:36:49 11/06/04 (1)
  • Re: Looking for F.E. - F.E. 06:01:46 11/07/04 (0)
• Injectors cutting out below 2K rpm - Jared in S-W 18:29:35 11/06/04 (2)
  • Try Combo relay first - Remy Davison 06:02:22 11/07/04 (1)
    • Re: Try Combo relay first - Jared in S-W 09:40:57 11/07/04 (0)
• Paging: Kaveman - Misha 16:58:35 11/06/04 (1)
  • Re: Paging: Kaveman - Kaveman 18:53:19 11/07/04 (0)
• front subframe removal today - Adam Wilson in Chicago 16:11:50 11/06/04 (3)
  • These may or may not help... - Mike E 17:02:53 11/07/04 (1)
    • great stuff! - Peter Florance 17:24:44 11/07/04 (0)
  • Aren't tie rods fun? - Tulsa Dave 09:21:54 11/07/04 (0)
• Hella Upgrades, Please advise me - Jerry Baldwin in Vermont 15:38:56 11/06/04 (3)
  • How much are the Euro headlights in the US? - Remy Davison 05:19:36 11/07/04 (1)
    • Re: Thanks and Best Wishes - Lyn Manecke 15:54:52 11/15/04 (0)
  • plug-n-play (more) - Adam Wilson in Chicago 15:49:03 11/06/04 (1)
    • I prefer the Cibies also, but - Mike W. 11:01:16 11/07/04 (0)
• need advice: chrome mirror upgrade - cfisher 13:15:06 11/06/04 (2)
  • Re: need advice: chrome mirror upgrade - Jeff (Atlanta) 15:24:58 11/06/04 (1)
    • Doors aren't all the same - Mike W. 18:25:12 11/06/04 (0)
• Selling authentic 16" Alpina wheels - SE 01:04:35 11/06/04 (1)
  • Re: stainless brakes line installation - Dianne William 14:10:46 11/15/04 (0)
• Selling ZF 3HP22 Tranny, Includes Torque Converter - Tomas Tupy 23:08:51 11/05/04 (2)
  • Re: Selling ZF 3HP22 Tranny, Includes Torque Converter - johnj 23:52:18 11/05/04 (1)
    • Re: Selling ZF 3HP22 Tranny, Includes Torque Converter - Tomas Tupy 08:00:12 11/06/04 (0)
• wheel fitment question - eric in denver 19:47:43 11/05/04 (3)
  • There should be another small number , , , - Jeff (Atlanta) 07:01:16 11/06/04 (2)
    • Re: Luis, read this it's a really funny story - Cecil Baird 09:18:53 11/22/04 (0)
    • Re: Luis, read this it's a really funny story - Jessica Terry 14:56:44 11/15/04 (0)
  • Need to know offset and bolt circle. (eom) - Troy Rudolph 20:04:55 11/05/04 (1)
    • Refer to the FAQ - Michael R from Melbourne 22:38:44 11/05/04 (1)
      • Re: Rear shift bracket mount on '81 Getrag 265 5-speed - Kathleen Swift 19:15:01 11/26/04 (0)
• Welding early heads question - Velocewest 13:24:12 11/05/04 (5)
  • Metalurgy - Mike W. 18:31:09 11/06/04 (0)
  • Re: Welding early heads question - Rick 05:13:32 11/06/04 (1)
    • I agree with Troy & Sam - james 12:55:38 11/06/04 (0)
  • Not worth it IMHO - Troy Rudolph 17:13:59 11/05/04 (1)
  • never weld a head - Sam 16:58:18 11/05/04 (1)
• jerry kingman...you gots mail...!! - jim at da shop 10:54:13 11/05/04 (3)
  • Re: road trip prep - Conor Shull 10:04:07 11/26/04 (0)
  • uh oh, watch out for that guy - Adam Wilson in Chicago 10:58:11 11/05/04 (3)
    • oh the pain....lol - jim at da shop 12:38:32 11/05/04 (1)
• e28 M5 Wheels FS - Peter Florance 08:46:58 11/05/04 (0)
• Anyone running style 33 wheels? - Craig in Davis 06:52:40 11/05/04 (4)
  • how about ...? - jim at da shop 13:17:29 11/05/04 (0)
  • I think they'd look great - stewart in slc 10:39:33 11/05/04 (2)
    • Seller asking $250 for set of 4 with tires 60% > - Craig in Davis 12:53:50 11/05/04 (1)
      • Love to but no $$$ nt - stewart in slc 15:30:11 11/05/04 (0)
• 530i AFM question (#001 vs. #004) - JB in Canada 06:14:17 11/05/04 (2)
  • Re: 530i AFM question (#001 vs. #004) - ara 10:39:30 11/06/04 (2)
    • Re: stainless brakes line installation - Luke Johnson 15:13:10 11/26/04 (0)
    • Re: stainless brakes line installation - Marjorie Gower 09:10:54 11/22/04 (0)
  • Not Recommended - Misha 12:33:44 11/05/04 (1)
• Weird radio problem... - Bill Hynes 05:54:26 11/05/04 (3)
  • Re: Weird radio problem... - Nate in Utah 17:19:49 11/08/04 (3)
  • Re: Weird radio problem... - Karl in KS 18:37:17 11/05/04 (4)
    • Re: Weird radio problem... - brian in nevada 19:33:59 11/05/04 (1)
      • Re: Rear shift bracket mount on '81 Getrag 265 5-speed - Nev Hill 05:52:08 11/22/04 (0)
• Sloppy steering - bigperm206 22:12:40 11/04/04 (4)
  • Re: Sloppy steering - peter mooney 05:30:35 11/05/04 (0)
  • Re: Sloppy steering - Peter Florance 04:48:28 11/05/04 (1)
  • Re: Sloppy steering - Mr. Coffey 22:26:07 11/04/04 (1)
    • Agreed... - Lenny D. 09:42:51 11/05/04 (1)
      • Re: 5 speed - Tibby Ford 15:34:33 11/15/04 (0)
• Just read that rebuilding your head can blow up... - Tomas Tupy 22:06:59 11/04/04 (5)
  • In Oregon High Desert, that's called Horse Puckey! - Lars Olbimmerguy 07:35:50 11/05/04 (0)
  • seems like intentional dis-information - Adam Wilson in Chicago 07:02:17 11/05/04 (0)
  • bunch of bull**** - peter mooney 05:36:32 11/05/04 (0)
  • Re: Just read that rebuilding your head can blow up... - Mr. Coffey 22:24:48 11/04/04 (1)
    • I agree... - Tulsa Dave 05:04:40 11/05/04 (0)
• How do you tell if you have the LSD? - Tomas Tupy 22:02:26 11/04/04 (6)
  • Re: How do you tell if you have the LSD? - Tito 21:39:17 11/05/04 (0)
  • Re: How do you tell if you have the LSD? - Mr. Coffey 22:22:32 11/04/04 (4)
    • LSD will have a white - Craig in Davis 06:35:34 11/05/04 (3)
      • Not all sideloaders were marked with the white S - Velocewest 10:46:27 11/05/04 (2)
        • Where on the passenger side are>> - Craig in Davis 12:51:03 11/05/04 (1)
          • Numbers are generally stamped - Velocewest 13:20:50 11/05/04 (0)
• LSD anyone?? - Dan J 21:06:18 11/04/04 (2)
  • Re: another question, Motronic? - Valery Javan 05:30:37 11/22/04 (0)
• Supercharger - Dan J 21:04:47 11/04/04 (1)
  • no ready-made supercharger for E12's - Adam Wilson in Chicago 21:24:30 11/04/04 (0)
• boot spoiler - Eric J Miller 19:28:47 11/04/04 (2)
  • got a near-perfect m-tech steering wheel - Art in CA 19:36:09 11/04/04 (1)
• Paging Al from Oz - Michael R from Melbourne 15:27:08 11/04/04 (3)
  • You have mail.nt - Al from Oz 17:27:33 11/04/04 (2)
    • Re: A plug for Studded Snow Tires and BMWs in Winter - Lynette Hauser 10:33:48 11/22/04 (0)
    • Re: You have mail.nt - Kaveman 18:53:59 11/04/04 (1)
• e12 info on CD - Michael R from Melbourne 15:22:04 11/04/04 (0)
• e12 info on CD - Michael R from Melbourne 15:21:22 11/04/04 (5)
  • Re: e12 info on CD - mattp 17:42:03 11/04/04 (6)
    • Re: e12 info on CD - Damien in Sydney 18:42:12 11/04/04 (0)
  • Re: e12 info on CD - Al from Oz 17:33:25 11/04/04 (8)
    • Re: another question, Motronic? - Jessie Waterbury 14:29:37 11/26/04 (0)
    • Re: another question, Motronic? - Reg Rows 13:01:46 11/26/04 (0)
    • I can get the dealer one also.nt. - Al from Oz 00:34:50 11/05/04 (0)
  • Re: e12 info on Net - Gerry ACT/Oz 16:10:15 11/04/04 (0)
• Still can't get rear brake discs off.. - Tom 09:50:58 11/04/04 (9)
  • Re: A plug for Studded Snow Tires and BMWs in Winter - Judy Hamby 10:21:54 11/22/04 (0)
  • Re: Still can't get rear brake discs off.. - Peter Florance 12:10:37 11/04/04 (1)
  • We normaly beat them off with a hammer. - Sam Schultz 10:47:07 11/04/04 (1)
    • Re: Parts list & Thank you - Thomas Henson 07:40:56 11/22/04 (0)
  • have you tried heat? (propane torch) (nt) - Adam Wilson in Chicago 10:00:56 11/04/04 (0)
• Anything else i can do to improve response - Tomas Tupy 08:09:52 11/04/04 (6)
  • Check your timing, or onto a 3.5 - Mike W. 21:16:18 11/04/04 (3)
    • timing helps - Karl in KS 18:28:21 11/05/04 (1)
    • Don't know if i want to do that right now - Tomas Tupy 22:11:57 11/04/04 (1)
      • Re: lower hose question - Daisy Prettyshield 08:45:45 11/22/04 (0)
  • Someone once said... - Mike E 14:08:35 11/04/04 (0)
  • What about improving performance in general? - Tomas Tupy 13:24:14 11/04/04 (1)
    • Re: 530i Part-Out/Restore - Ernie Richmond 10:18:39 11/26/04 (0)
  • is everything nice and clean? - Adam Wilson in Chicago 08:24:54 11/04/04 (0)
• Diff ratios - Jeff 00:20:40 11/04/04 (4)
  • Oz/NZ 525s had 3.64 diff - Remy Davison 07:24:45 11/04/04 (0)
  • Re: Diff ratios - Peter Florance 04:36:42 11/04/04 (2)
    • my '80 525/6 4-speed had a 3.91 (eom) - ...tom 05:19:12 11/04/04 (1)
      • Info link that will help you. - Michael R from Melbourne 20:20:58 11/04/04 (1)
• Pragmatic praises - T.Han 20:34:05 11/03/04 (1)
  • well said (nt) - Peter Florance - First Fives Dictator for Life 04:37:09 11/04/04 (0)
• Turn signal relay - Craig in Davis 17:56:47 11/03/04 (5)
  • My mistake, it is the hazard switch>> - Craig in Davis 22:16:19 11/03/04 (1)
    • same thing happened to me.. - Art in CA 08:59:35 11/04/04 (0)
  • Don't think that's the problem, but - Mike W. 19:27:31 11/03/04 (0)
  • Re: Turn signal relay - Tarazona 18:24:56 11/03/04 (1)
    • Re: Turn signal relay - T.Han 20:10:08 11/03/04 (0)
• Got my Water Pump off - Brian in Calgary 16:26:20 11/03/04 (5)
  • I love my ratcheting open-ended offset wrenches... - Mike E 19:19:40 11/03/04 (4)
    • Here are the removal pics - Brian in Calgary 21:48:17 11/03/04 (3)
      • Gee ya motor is a bit dirty mate!!! - mattp 17:52:38 11/04/04 (2)
        • Just like everyone else on here, - Damien in Sydney 19:24:25 11/04/04 (6)
          • Re: another question, Motronic? - Lynette Dick 04:31:10 11/26/04 (0)
          • Re: another question, Motronic? - Jack Terry 04:58:12 11/22/04 (0)
          • Re: another question, Motronic? - Beverly Ryan 14:29:27 11/15/04 (0)
          • Yup.... on the list....getting close to winter tho - Brian in Calgary 22:03:07 11/04/04 (1)
            • Re: another question, Motronic? - Cian Anderson 06:04:10 11/22/04 (0)
• Oil usage question - Martin 15:14:30 11/03/04 (5)
  • Likely, but... - Mike W. 18:48:55 11/03/04 (2)
    • totally agree, valve seals. The good compression - Big Dog 07:20:59 11/04/04 (1)
      • Nope, head comes off - Mike W. 21:23:23 11/04/04 (2)
        • Re: for those interested? - Reginal Millsaps 18:41:28 11/26/04 (0)
        • Re: for those interested? - Ronnie Coffee 09:16:18 11/22/04 (0)
  • Re: Oil usage question - Bob 17:05:28 11/03/04 (1)
    • Re: Oil usage question - Martin 17:51:14 11/03/04 (0)
• FRANK HAAS, check your e-mail! - Jeff Olson 12:51:32 11/03/04 (0)
• looking for m-tech steering wheel (or equivalent) - Art in CA 10:21:36 11/03/04 (8)
  • Isn't that wheel also used on the 86 325es ? - Jeff (Atlanta) 16:08:28 11/04/04 (0)
  • your E12 - Adam Wilson in Chicago 16:15:00 11/03/04 (1)
    • Re: your E12 - Art in CA 16:51:35 11/03/04 (0)
  • m-tech would be as displayed on don daynes car - jim at da shop 15:42:45 11/03/04 (1)
    • thanks jim.. - Art in Ca 16:49:39 11/03/04 (0)
  • confused .... "M-tech"??? - Adam Wilson in Chicago 11:43:39 11/03/04 (2)
    • Re: confused .... "M-tech"??? - Art in CA 13:18:21 11/03/04 (1)
      • Re: confused .... "M-tech"??? - Michael R from Melbourne 15:30:59 11/03/04 (0)
• Misc Parts for sale B/O takes all need to get rid - ken 22:30:00 11/02/04 (2)
  • my son will checking the email if any one interest - ken 22:31:37 11/02/04 (1)
    • Sent email - F.E. 12:41:50 11/03/04 (0)
• Cooked me head- bugger - mattp in melb 18:50:10 11/02/04 (8)
  • Some veteran philosophy....Sympathetic, but>> - Lars Olbimmerguy 19:59:04 11/02/04 (5)
    • Good response! - Damien in Sydney 20:38:15 11/02/04 (1)
      • Complimented that you want to ... Use it at will! - Lars OBG 21:17:39 11/02/04 (0)
    • Re: Some veteran philosophy....Sympathetic, but>> - mattp 20:19:24 11/02/04 (2)
      • Lars-as ever-is dead right - Remy Davison 03:52:51 11/03/04 (0)
      • Didn't presume you were complaining... Just an - Lars OBG 21:16:42 11/02/04 (0)
  • Tough break Matt. - Michael R from Melbourne 19:26:02 11/02/04 (1)
    • Re: Tough break Matt. - mattp 20:29:41 11/02/04 (0)
• Still Selling My Rebuilt ZF 3HP22 Tranny for $100 - Tomas Tupy 13:46:11 11/02/04 (4)
  • Re: Still Selling My Rebuilt ZF 3HP22 Tranny for $100 - Brad Hodges 15:24:20 11/05/04 (0)
  • Connect it in series - Michael R from Melbourne 19:39:59 11/02/04 (2)
    • Man... interesting, BUT that Sucker is going to be - Lars Olbimmerguy 10:15:48 11/03/04 (0)
    • Great Concept - Tomas Tupy 22:33:35 11/02/04 (0)
• Fuel Pump - Lou in Denver 13:31:35 11/02/04 (4)
  • Re: Fuel Pump - Steve Haygood 21:04:22 11/03/04 (0)
  • Hey Lou, read please - Jeff C 11:21:54 11/03/04 (0)
  • Re: Fuel Pump - Mike W. 22:10:59 11/02/04 (0)
  • Hold on!!! - Jeff C 14:14:46 11/02/04 (0)
• vote Kerry `cause he looks like me' - Herman Munster 12:13:06 11/02/04 (1)
  • please don't read or respond to this OT post - Peter Florance 15:59:37 11/02/04 (0)
• Contact info needed for Peter F. and Lee C. (m) - Rich in Savannah 10:03:42 11/02/04 (1)
  • Re: Contact info needed for Peter F. and Lee C. (m) - Big Dog 11:42:17 11/02/04 (0)
• Brake & Light inspection, any recommendations> - Craig in Davis 08:14:11 11/02/04 (1)
  • I've been thru a couple - Mike W. 22:00:16 11/02/04 (0)
• Auto Trans Woes-- size of Torx socket for filter? - Brad In Texas 07:03:18 11/02/04 (2)
  • 27mm, IIRC - Remy Davison 03:59:05 11/03/04 (0)
  • Re: Auto Trans Woes-- size of Torx socket for filter? - ChuckNC 12:55:11 11/02/04 (0)
• 5er Fest 2005 info. - Brian da Parts Pimp 20:17:15 11/01/04 (0)
• Oil drain plug... - Bill Hynes 18:25:53 11/01/04 (2)
  • Re: Oil drain plug... - Damien in Sydney 19:14:25 11/01/04 (1)
    • Model differences - Remy Davison 05:47:11 11/02/04 (0)
• Trunk Leak - Steve G 17:50:08 11/01/04 (12)
  • New Tail Light Gasket: $135 !!! - Steve 10:35:30 11/02/04 (9)
    • Bav Auto - $19 - Mike E 16:35:08 11/02/04 (5)
      • Re: Bav Auto - $19 - Damien in Sydney 13:41:46 11/03/04 (2)
        • Which Guys? - Mike E 15:55:16 11/03/04 (1)
          • Oops. The link didn't work - Damien in Sydney 17:58:54 11/03/04 (0)
      • Insist they use UPS standard air mail - Remy Davison 04:02:20 11/03/04 (0)
      • Mike E - try Imparts or Hanvic - Michael R from Melbourne 19:29:06 11/02/04 (0)
    • Re: New Tail Light Gasket: $135 !!! - Bob Humphrey 15:06:28 11/02/04 (0)
    • Depending on your point of view this may be great> - Craig in Davis 14:03:30 11/02/04 (0)
    • Wow, E28 gaskets are $15. I'd try a diff dealer. - Dave_in_VA 10:42:35 11/02/04 (0)
  • Tail light gasket - Gerry ACT/Oz 17:58:35 11/01/04 (1)
    • Re: Tail light gasket - Bob Humphrey 20:28:56 11/01/04 (0)
• Fan coupling - Matt D UK 16:27:10 11/01/04 (3)
  • I can confirm... - Tulsa Dave 05:03:05 11/02/04 (0)
  • Re: Fan coupling - Robert Bondi 21:14:38 11/01/04 (1)
    • Re: Fan coupling - Matt D UK 07:50:21 11/02/04 (0)
• Nice top-bolt oil filter adapter - Velocewest 15:42:48 11/01/04 (2)
  • Re: Nice top-bolt oil filter adapter - KSBinVA 08:53:03 11/02/04 (0)
  • that's a good deal - Peter Florance 03:34:47 11/02/04 (0)
• Any E12er's Here From Sydney Australia? - Kaveman 14:38:44 11/01/04 (1)
  • You have mail. nt. - Damien in Sydney 19:09:03 11/01/04 (0)
• WTB - Large BMW Screwdriver - Tom Masters 10:02:25 11/01/04 (3)
  • Tom.. I hate to say this>>>> - Lars Olbimmerguy 10:59:31 11/01/04 (2)
    • It's the fastest way to let the air out.... - Tom Masters 11:36:13 11/01/04 (0)
    • Re:HAHAHAHAHAHA - Jared in S-W 11:16:32 11/01/04 (0)
• Car Died - Lou in Denver 08:32:16 11/01/04 (2)
  • Fuse blown - Lou in Denver 13:10:07 11/01/04 (1)
    • Re: Fuse blown - Peter Florance 18:20:15 11/01/04 (0)
• 320i intakes at Oakland PicknPull - Art in CA 08:24:39 11/01/04 (4)
  • Planning to go this friday - Tomas Tupy 17:56:32 11/01/04 (1)
    • I've had better luck at the Newark one - Mike W. 22:14:03 11/02/04 (0)
  • Re: 320i intakes at Oakland PicknPull - Andrew in Chicago 14:08:26 11/01/04 (0)
  • also a couple 140mph spedos... - Art in CA 08:26:50 11/01/04 (0)
• 1980 BMW E12 528i w/5-speed FOR SALE in NC! - Jeff Olson 06:27:14 11/01/04 (3)
  • Re: 1980 BMW E12 528i w/5-speed FOR SALE in NC! - ChuckNC 09:02:58 11/01/04 (0)
  • Hey Jeff NC! - Chris Hollis 07:11:50 11/01/04 (1)
    • Re:To bad were not Volvoturbowagon.com - Jared in S-W 11:19:16 11/01/04 (0)
• Reconditioned M10 engine forsale - QWK-520 01:07:03 11/01/04 (2)
  • oops - Mike E 01:37:23 11/01/04 (1)
    • Here's the link you need Mike - Michael R from Melbourne 19:35:47 11/02/04 (0)
• HELP removing water pump - Brian in Calgary 22:18:21 10/31/04 (5)
  • You know what they say, get a bigger hammer... - Bill Bowes 16:58:23 11/01/04 (0)
  • Re: HELP removing water pump - Big Dog 13:06:36 11/01/04 (1)
    • Re: HELP removing water pump - Brian in Calgary 15:49:53 11/01/04 (0)
  • had the same thing happen on mine - Adam Wilson in Chicago 04:48:40 11/01/04 (1)
    • hmmm...maybe if I remove the A/C .. - Brian in Calgary 09:54:34 11/01/04 (0)
• Were best place to list e28 parts - ken 21:46:24 10/31/04 (2)
  • Mye28.com - Mike W. 22:05:42 10/31/04 (0)
  • Roadfly or MyE28... both active - Lars Olbimmerguy 21:49:18 10/31/04 (0)
• subframe bushing install (picture) - Peter Florance 19:21:13 10/31/04 (4)
  • You just levered it in? - Mike W. 20:09:19 10/31/04 (3)
    • yes (more) - Peter Florance 03:37:14 11/01/04 (2)
      • but what about the "Grunt's" bushings? - Adam Wilson in Chicago 06:40:51 11/01/04 (1)
        • Re: but what about the "Grunt's" bushings? - Peter Florance 06:50:06 11/01/04 (0)
• Last chance for the seat or its trash , also pass - ken 19:09:48 10/31/04 (3)
  • Can't rememeber seat details-- Leather? - Brad In Texas 06:35:55 11/04/04 (0)
  • Where are you located? - Dan Lafley 21:18:00 10/31/04 (1)
    • upstate ny near utica - ken 21:44:15 10/31/04 (0)
• HT Wires - F.E. 18:53:35 10/31/04 (2)
  • Re: HT Wires - stephen 18:58:53 11/02/04 (1)
    • Thanks atleast someone knows what im talking about - F.E. 12:27:49 11/03/04 (0)
• Noise from the right rear subframe mount? - Klaus 18:19:53 10/31/04 (6)
  • Re: Noise from the right rear subframe mount? - Peter Florance 05:55:11 11/01/04 (5)
    • As usual you're right on, Peter! - Klaus 19:28:53 11/01/04 (4)
      • Re: As usual you're right on, Peter! - Peter Florance 19:39:20 11/01/04 (3)
        • Re: As usual you're right on, Peter! - Klaus 20:22:45 11/01/04 (2)
          • those 81's are really thin in the sheet metal - Peter Florance 03:31:54 11/02/04 (1)
            • Re: those 81's are really thin in the sheet metal - Klaus 21:03:40 11/02/04 (0)
• CD Player cuts-out when Brake Lights Come on - Tomas Tupy 18:01:49 10/31/04 (4)
  • Re: CD Player cuts-out when Brake Lights Come on - Klaus 18:17:42 10/31/04 (0)
  • Re: CD Player cuts-out when Brake Lights Come on - Peter Florance 18:16:33 10/31/04 (1)
    • Re: CD Player cuts-out when Brake Lights Come on - Kaveman 14:36:37 11/01/04 (0)
  • Re: CD Player cuts-out when Brake Lights Come on - jim at da shop 18:06:39 10/31/04 (0)
• Haynes manual (not mine) FS - Mike E 16:06:35 10/31/04 (1)
  • Re: Haynes manual (not mine) FS - Damien in Sydney 17:47:41 10/31/04 (0)
• 557 update - peter mooney 14:24:04 10/31/04 (0)
• columbus Ohio BMW mechanic? - James H 14:22:20 10/31/04 (1)
  • I am moving there in Dec. - TCD 19:50:12 10/31/04 (0)
• Question on right hand drive cars - Bill Hynes 08:49:26 10/31/04 (5)
  • Shift pattern is the same. - Dave_in_VA 09:33:27 10/31/04 (4)
    • Re: Shift pattern is the same.- Not in Australia - Michael R from Melbourne 14:16:49 10/31/04 (3)
      • After living (and driving ) in HK for 3 years - Velocewest 09:30:14 11/01/04 (1)
        • I've had more trouble at home... - Tulsa Dave 18:17:31 11/01/04 (0)
      • LOL, very good Michael... - Mike W. 20:16:37 10/31/04 (0)
• To those in the Toronto Ontario Area - Cdn_Bmr 06:40:25 10/31/04 (1)
  • Re: To those in the Toronto Ontario Area - Eddie in TO 19:10:45 10/31/04 (0)
• Timing tweeks for 1980 528i? - Jeff Olson 05:41:12 10/31/04 (1)
  • Re: Timing tweeks for 1980 528i? - Peter Florance 05:48:37 10/31/04 (0)
• Speedo cable - Remy Davison 05:22:14 10/31/04 (8)
  • Re: Speedo cable - Peter Florance 06:08:14 10/31/04 (7)
    • Thanks Peter-whereabouts 'under dash'? - Remy Davison 05:22:44 11/01/04 (6)
      • Re: Thanks Peter-whereabouts 'under dash'? - Peter Florance 05:29:08 11/01/04 (5)
        • Not in RHD vehicles - Damien in Sydney 21:10:08 11/01/04 (4)
          • maybe it's time for some RHD faq's? - Pet er Florance 03:32:48 11/02/04 (3)
            • Peter - you have mail nt - Damien in Sydney 21:33:08 11/04/04 (0)
            • Re: maybe it's time for some RHD faq's? - Damien in Sydney 13:58:14 11/02/04 (0)
            • Re: maybe it's time for some RHD faq's? - Remy Davison 05:56:18 11/02/04 (0)
• Flickering oil pressure light - Drew 00:06:56 10/31/04 (7)
  • what weight oil? - Peter Florance 04:39:12 10/31/04 (1)
    • Re: what weight oil? - Drew 08:23:18 10/31/04 (0)
  • Re: Flickering oil pressure light - Drew 00:15:47 10/31/04 (4)
    • Idle speed? - Matt C 03:48:18 10/31/04 (3)
      • Re: Idle speed? - Drew 08:24:50 10/31/04 (2)
        • Re:Where did you get your cam???? - Jared in S-W 11:22:04 11/01/04 (1)
          • Re:Where did you get your cam???? - Drew 22:14:23 11/04/04 (0)
• //M 535i (cont') photo's (long) - Michael R from Melbourne 19:25:51 10/30/04 (3)
  • Re: //M 535i (cont') photo's (long) - Mitch 17:23:41 11/02/04 (0)
  • Nah-It's PO'd in USA also- Ask Me How I Know... - Lars... 20:42:23 10/30/04 (1)
    • VIN Decoded - Matt C 04:02:41 10/31/04 (0)
• headliner install tips...? - jim at da shop 18:20:01 10/30/04 (3)
  • There is a real good one in the Technical FAQ - Dale 06:37:34 10/31/04 (2)
    • Re: There is a real good one in the Technical FAQ - jim at da shop 07:22:53 10/31/04 (1)
      • ok....looked at it....... - jim at da shop 16:21:28 10/31/04 (0)
• Aux Air valve - oz Jeff 17:21:14 10/30/04 (2)
  • Re: Aux Air valve - Michael R from Melbourne 19:59:25 10/30/04 (0)
  • Re: Aux Air valve - Jared in S-W 17:26:36 10/30/04 (0)
• Performance Swaybars...contd. - Patrick 15:46:01 10/30/04 (3)
  • Addco Sway Bars for E12? BMW Link... - Jeff Olson 05:29:32 10/31/04 (1)
    • some thoughts on front bar size (also Saner link) - Peter Florance 06:05:15 10/31/04 (0)
  • springs and sways - Adam Wilson in Chicago 21:41:58 10/30/04 (0)
• Performance Swaybars - Patrick 15:42:16 10/30/04 (0)
• Red and Blue Bearings - Dave_in_VA 13:52:13 10/30/04 (3)
  • Re: Red and Blue Bearings - Adam Wilson in Chicago 14:18:38 10/30/04 (2)
    • Re: Red and Blue Bearings - Peter Florance 21:47:34 10/30/04 (0)
    • Re: Red and Blue Bearings - Dave_in_VA 14:40:50 10/30/04 (0)
• I had a busy afternoon today... - Damien in Sydney 02:15:37 10/30/04 (2)
  • Good job - but zinc it. - Remy Davison 06:29:22 10/30/04 (1)
    • Re supercheap - MattP in Melb 18:04:06 11/02/04 (0)
• FOR SALE 1980 M535i (clone) - Jerry Kingman 23:06:41 10/29/04 (7)
  • Isn't that the same car you sold last year or so? - Jeff Olson 07:08:37 10/30/04 (2)
    • Hey Jeff - Chris Hollis 08:02:18 10/30/04 (1)
      • I've got photos of the old one, more... - Jeff Olson 09:05:04 10/30/04 (0)
  • Re: FOR SALE 1980 M535i (clone) - Chris Hollis 04:39:56 10/30/04 (0)
  • Re: FOR SALE 1980 M535i (clone) - Mitch in Huntington Beach 23:59:05 10/29/04 (2)
    • Yeah, I was lucky enough to get one of them!!! - RonP 16:03:39 11/01/04 (1)
      • Re: Yeah, I was lucky enough to get one of them!!! - Mitch in Huntington Beach 16:17:50 11/01/04 (0)
• Desmogged - ET57 22:26:27 10/29/04 (0)
• 140 MPH speedo found 2 at Pick N Pull - Craig in Davis 18:39:54 10/29/04 (4)
  • Yebutt??? - Lars Olbimmerguy 20:18:08 10/29/04 (3)
    • LOL :)) -nt - Art in CA 08:25:38 11/01/04 (0)
    • Re: Yebutt??? - Craig in Davis 21:42:36 10/29/04 (0)
    • Closer to 140 than to 85 - Mike W. 21:01:17 10/29/04 (0)
• Still have parts available - Tarazona 15:26:08 10/29/04 (3)
  • If I were you - Mike W. 21:10:24 10/29/04 (0)
  • Re: Still have parts available - greghill-phx,az 18:37:11 10/29/04 (0)
  • '80 528i parts available - JB in Canada 17:20:49 10/29/04 (0)
• Clunk! Goes the Tranny... - Dan Lafley 14:45:30 10/29/04 (3)
  • Re: Clunk! Goes the Tranny... - ChuckNC 06:48:18 10/30/04 (0)
  • Re: Clunk! Goes the Tranny... - Matt C 17:24:17 10/29/04 (1)
    • OOOPPS...its an AUTO.... - Dan Lafley 19:54:09 10/29/04 (0)
• wet weather delema - Wayne 14:05:42 10/29/04 (2)
  • do not read or reply to this post - sent to Level3 - Peter Florance - First Fives Dictator for Life 15:36:59 10/29/04 (1)
    • Re: do not read or reply to this post - sent to Level3 - ether does the trick 15:13:46 11/01/04 (0)
• Stuck (spinning) Spark Plug - DonInVancouverWA 13:07:06 10/29/04 (2)
  • Re: Stuck (spinning) Spark Plug - me 05:05:23 10/30/04 (0)
  • I'd try - Mike W. 21:15:56 10/29/04 (0)
• Pics of speakers installed - Mark Schuurman 07:42:59 10/29/04 (0)
• broken rocker arm - peter mooney 07:32:44 10/29/04 (11)
  • Re: broken rocker arm - Frank H 11:31:30 10/29/04 (0)
  • not unheard of - Peter Florance 08:50:36 10/29/04 (0)
  • I have never heard of an M30 rocker arm breaking - Big Dog 08:48:41 10/29/04 (8)
    • Re: I have never heard of an M30 rocker arm breaki - brett 19:21:53 11/11/04 (0)
    • Re: I have never heard of an M30 rocker arm breaking - peter mooney 09:40:57 10/29/04 (6)
      • If it's a 528i, you can't over rev it - Mike W. 21:20:00 10/29/04 (5)
        • I think Euros have 6,800 rev limiter - Remy Davison 06:33:52 10/30/04 (0)
        • Re: If it's a 528i, you can't over rev it EXCEPT > - Craig in Davis 05:39:31 10/30/04 (3)
          • True true, but that's not how I overrev them! LOL - Mike W. 15:37:10 10/30/04 (2)
            • 8000+rpm (missed shift )will do it - The Rev. Brendan X 17:09:12 10/30/04 (1)
              • also if... - Peter Florance 21:03:17 10/30/04 (0)
• Has anyone here run sidedrafts on an M30? - Justin in C'ville 06:40:47 10/29/04 (2)
  • Re: Has anyone here run sidedrafts on an M30? - Mitch in Huntington Beach 00:15:34 10/30/04 (0)
  • Re: Has anyone here run sidedrafts on an M30? - Rick 07:00:25 10/29/04 (0)
• The M535i for sale - Michael R from Melbourne 03:03:16 10/29/04 (3)
  • Perhaps I should steal it ;-) - Remy Davison 18:36:01 10/29/04 (0)
  • I thought it was badgeless? - Adam Wilson in Chicago 07:06:36 10/29/04 (0)
  • You could take up drugs rather than BMWs?? - Aaron from Aus 05:42:44 10/29/04 (0)
• Euro 732i parts car - Troy Rudolph 19:12:41 10/28/04 (0)
• anyone need euro door panels? - ...tom 17:18:58 10/28/04 (0)
• Windshield install - Craig in Davis 16:25:33 10/28/04 (4)
  • Lots - Mike W. 22:22:28 10/28/04 (3)
    • Thanks, sounds similar to the old VW bug method - Craig in Davis 03:22:16 10/29/04 (2)
      • It is the same thing - Mike W. 21:22:30 10/29/04 (1)
        • Windshield is in, broke the first one trying to> - Craig in Davis 12:33:08 10/30/04 (0)
• Push Button Switch - Sure it will Start $4.95+tax! - Neck Smith 12:36:30 10/28/04 (0)
• Idle issues - 1980 528i - awevans 11:45:08 10/28/04 (3)
  • Re: Idle issues - 1980 528i - aevans 15:54:43 10/28/04 (2)
    • Long shot - Mike W. 22:35:26 10/28/04 (1)
      • Re: Long shot - awevans 19:02:36 11/01/04 (0)
• camshaft R&R - peter mooney 11:07:48 10/28/04 (11)
  • Re: camshaft R&R - peter mooney 07:26:04 10/29/04 (2)
    • careful - Peter Florance 08:51:54 10/29/04 (1)
      • Re: careful - peter mooney 09:48:34 10/29/04 (0)
  • Not really - Mike W. 22:30:00 10/28/04 (0)
  • Re: camshaft R&R - Velocewest 15:02:16 10/28/04 (2)
    • I have one of those over my stove , , , , , - Jeff (Atlanta) 15:19:51 10/28/04 (1)
      • You dont NEED the special tool - Michael R from Melbourne 16:29:57 10/28/04 (0)
  • Absolutely missing something!!! - Lars Olbimmerguy 11:23:03 10/28/04 (3)
    • Reminds me of the joke... - Al from Oz 19:30:48 10/28/04 (0)
    • Re: Absolutely missing something!!! - Jeff (Atlanta) 15:18:25 10/28/04 (0)
    • Re: Absolutely missing something!!! - Peter Florance 11:29:46 10/28/04 (0)
• Gear ratios - Chris Hollis 10:51:08 10/28/04 (10)
  • Gear ratios - Velocewest 14:57:59 10/28/04 (9)
    • Re: Gear ratios - Chris Hollis 15:03:12 10/28/04 (8)
      • Re: Rear gatios - Velocewest 15:06:34 10/28/04 (7)
        • Re: Rear gatios - Chris Hollis 15:58:41 10/28/04 (6)
          • Re: Rear gatios - Velocewest 16:47:34 10/28/04 (5)
            • also cheaper - Peter Florance 03:03:35 10/29/04 (3)
              • trans usage clarification.......... - jim at da shop 09:58:59 10/29/04 (2)
                • Hey Jim... - Chris Hollis 11:03:52 10/29/04 (1)
                  • Re: Hey Jim... - jim at da shop 15:20:59 10/29/04 (0)
            • Re: Rear gatios - Chris 18:08:30 10/28/04 (0)
• 320i Intake Runners at Pick-n-Pull - Tomas Tupy 09:39:18 10/28/04 (1)
  • Never Mind, Found answer in earlier post - Tomas Tupy 09:41:17 10/28/04 (0)
• Gear Selector on Automatic Wiring Diagram - Tomas Tupy 08:59:14 10/28/04 (1)
  • no-start relay - David B 23:13:23 10/28/04 (0)
• M535i question - MIchael R from Melbourne 03:10:48 10/28/04 (10)
  • Ooh, where is it? Where advertised? - Remy Davison 17:59:38 10/28/04 (4)
    • ///M cars - Al from Oz 05:09:43 10/29/04 (3)
      • that blows - Adam Wilson in Chicago 07:16:01 10/29/04 (2)
        • You have hit the nail right on the head. - Al from Oz 03:36:51 10/30/04 (0)
        • Now now Adam, let's not get huffy :) - Mitch in Huntington Beach 00:22:16 10/30/04 (0)
  • paging Remy - Michael R from Melbourne 17:28:34 10/28/04 (2)
    • Re: Remy's Road Tests - Gerry ACT/Oz 17:51:44 10/28/04 (1)
      • That's actually a 1980 Sth Af road test - Remy Davison 21:23:29 10/28/04 (0)
  • Re: M535i question - Al from Oz 15:25:06 10/28/04 (0)
  • About the seats ... - Niklas E12 Motronic 05:15:43 10/28/04 (0)
• Replica wholesaler:LV CD Chanel Prada Gucci - DesignerMirror.com 21:30:02 10/27/04 (0)
• St. Helens Volcano cam - Frank H 16:10:04 10/27/04 (1)
  • Hey kool about that much from me too.... - Dan Lafley 20:17:07 10/27/04 (0)
• Hi,and.. - Matt D UK 14:00:37 10/27/04 (3)
  • Re: Hi,and.. - Matt D UK 12:26:22 10/28/04 (1)
    • Re: Hi,and.. - Peter Florance 16:15:57 10/28/04 (0)
  • Re: Hi,and.. - Peter Florance 17:18:29 10/27/04 (0)
• New e12? - Chris Hollis 13:49:54 10/27/04 (3)
  • Chris, drop me a line, I've got TWO! - Jeff Olson 15:47:00 10/27/04 (0)
  • Re: New e12? - Ryan Bryan 14:17:37 10/27/04 (1)
    • Re: New e12? - Ryan Bryan 14:18:23 10/27/04 (0)
• Still selling my ZF 3HP22 Rebuilt $100 inc:Flyw... - Tomas Tupy 11:48:37 10/27/04 (0)
• hey Misha, send me an email offline - Adam Wilson in Chicago 09:46:12 10/27/04 (0)
• '76 530i FS or parts - Tom Masters 09:14:59 10/27/04 (5)
  • Parts for FREE - Tom Masters 13:20:41 10/27/04 (4)
    • Re: Parts for FREE - JB in Canada 05:31:51 10/28/04 (3)
      • Re: Parts for FREE - Tom Masters 09:01:52 10/28/04 (2)
        • AFM and ECU for 530i - JB in Canada 10:04:11 10/28/04 (1)
          • JB, please send email, nt - Tom Masters 10:33:11 10/28/04 (0)
• K&N Air Filter - Bill Hynes 08:25:21 10/27/04 (5)
  • I have a rectangular K&N Air Filter - John in Simi Valley 23:09:39 10/27/04 (0)
  • Re: K&N Air Filter - Art in CA 12:52:53 10/27/04 (2)
    • Re: K&N Air Filter - Mango 00:34:11 10/28/04 (1)
      • Re: K&N Air Filter - Art in CA 20:57:34 10/28/04 (0)
  • Re: K&N Air Filter - Eddie in TO 11:22:02 10/27/04 (0)
• Used rear Bilstein HD's for sale from my 76 - Matt C 05:49:06 10/27/04 (1)
  • Used front Bilstein HD's for sale from my 76 - Jaime Obando 12:19:41 10/28/04 (0)
• Resistors! - Dan Lafley 04:36:29 10/27/04 (2)
  • there are resistors and then there are resistors - Peter Florance 20:56:15 10/27/04 (0)
  • Re: Resistors! - Troy Rudolph 18:09:50 10/27/04 (0)
• New Shock Inserts... - Kaveman 22:33:57 10/26/04 (3)
  • Yes - greghill-phx,az 12:24:17 10/27/04 (1)
    • rebuild bilsteins. . I need that here in TEXAS !! - Jaime Obando 12:21:34 10/28/04 (0)
  • Yes they do rebuild. - Michael R from Melbourne 01:28:30 10/27/04 (0)
• Been busy with the new family, but i have some ,,, - Rami 17:43:11 10/26/04 (1)
  • Differential? - Velocewest 09:43:05 10/28/04 (0)
• Brake guru's to front. - Matt C 17:29:09 10/26/04 (3)
  • Re: Brake guru's to front. - Troy Rudolph 18:12:01 10/27/04 (0)
  • hoses - ChuckNC 06:08:39 10/27/04 (0)
  • Re: Brake guru's to front. - Mike W. 22:06:13 10/26/04 (0)
• hello from zimbabwe! - garfield 16:02:53 10/26/04 (0)
• hello from zimbabwe! - garfield 16:02:12 10/26/04 (0)
• hello from zimbabwe! - garfield 16:02:11 10/26/04 (0)
• Troublesome Relays - Eric Anderton 16:01:17 10/26/04 (0)
• hello from zimbabwe! - garfield 14:50:26 10/26/04 (0)
• anyone have a pic of a stock radio? - Todd Slydell 13:32:14 10/26/04 (7)
  • Re: anyone have a pic of a stock radio? - Dale 08:06:58 10/27/04 (0)
  • Re: anyone have a pic of a stock radio? - Tom Masters 13:50:53 10/26/04 (5)
    • Re: anyone have a pic of a stock radio? - Todd Slydell 17:23:42 10/26/04 (4)
      • Sorry, my interior is Blue.....nt - Tom Masters 22:01:11 10/26/04 (0)
      • This sounds very much like insurance fraud, - Damien in Sydney 20:56:53 10/26/04 (2)
        • This is America -- it's not fraud - Velocewest 11:20:53 10/27/04 (1)
          • Re: This is America -- it's not fraud - Todd Slydell 13:45:33 10/27/04 (0)
• Ignition Switch Stuck in Steering Column 1980 528i - Matt D 12:32:46 10/26/04 (9)
  • Re: Ignition Switch Stuck in Steering Column 1980 528i - Chris Hollis 09:31:25 10/27/04 (0)
  • Re: Ignition Switch Stuck in Steering Column 1980 528i - Tom Masters 13:26:40 10/26/04 (7)
    • Not needed for just switch replacement - Mike W. 19:02:57 10/26/04 (6)
      • Re: Not needed for just switch replacement - Matt D 11:33:44 10/27/04 (5)
        • Re: Not needed for just switch replacement - Chris Hollis 13:22:55 10/27/04 (4)
          • Finally Done =) - Matt D 15:15:00 10/28/04 (0)
          • Re: Not needed for just switch replacement - Matt D 10:17:37 10/28/04 (2)
            • My key switch turns but car won't start-after 10 x - Jaime Obando 12:26:57 10/28/04 (1)
              • Push Button Switch - Sure it will Start $4.95+tax! - Neck Smith 13:56:44 10/28/04 (0)
• Instrument Cluster - Ernie Babin 10:58:06 10/26/04 (13)
  • Re: Instrument Cluster - Ernie Babin 11:02:36 10/27/04 (0)
  • Ernie, you have mail...... - BavarianRescue 06:29:48 10/27/04 (0)
  • From the resident Odometer Dude... - Jeff C 17:47:14 10/26/04 (0)
  • Re: Instrument Cluster - billy 14:38:57 10/26/04 (5)
    • Re: Instrument Cluster - Bob in San Jose 14:50:31 10/26/04 (4)
      • Re: Instrument Cluster - billy 11:13:03 10/27/04 (1)
        • Re: Instrument Cluster - billy 11:15:47 10/27/04 (0)
      • Opps, try this link - Bob in San Jose 15:00:14 10/26/04 (0)
      • Re: Instrument Cluster - Tom Masters 14:59:45 10/26/04 (0)
  • be carefull - Andrew 12:20:48 10/26/04 (0)
  • Re: Instrument Cluster - Ryan Bryan 12:08:29 10/26/04 (2)
    • 125 mph - Tom Masters 12:33:12 10/26/04 (0)
    • Re: Instrument Cluster - ChuckNC 12:11:23 10/26/04 (0)
• 5er Fest 2004 pictures - Robert Bondi 06:07:23 10/26/04 (6)
  • hers the link to the event gallery - jim at da shop 11:36:15 10/26/04 (0)
  • link - Robert Bondi 06:08:31 10/26/04 (4)
    • 5er Fest 2004 - Tom Masters 08:54:30 10/26/04 (3)
      • Re: 5er Fest 2004 - Bob in San Jose 14:43:07 10/26/04 (2)
        • Re: 5er Fest 2004 - Tom Masters 16:17:01 10/26/04 (1)
          • northwest gatherings.......... - jim at da shop 09:13:26 10/27/04 (0)
• Brian, the headrests arrived Monday 10/25 - NC Doug 05:04:46 10/26/04 (1)
  • Great Doug... glad they finally got there. - Brian in Calgary 22:03:10 10/31/04 (0)
• Paging Suzy doowap !! Need bell ring start button! - Jaime Obando 19:37:30 10/25/04 (0)
• AFMs... I'm confused... seeking wisdom - Nate in Utah 16:44:12 10/25/04 (13)
  • Don't know about wisdom, but here's what works - Mike W. 17:43:01 10/25/04 (12)
    • much thanks; the FAQ lists 633/733 AFM as L-Jet... - Nate in Utah 19:07:48 10/25/04 (11)
      • I have one... - ChuckNC 09:19:26 10/26/04 (0)
      • Re: much thanks; the FAQ lists 633/733 AFM as L-Je - Mike W. 22:03:50 10/25/04 (9)
        • You guys are freakin cool - Nate in Utah 13:23:02 10/26/04 (8)
          • I suspect my list is wrong - Peter Florance 21:00:34 10/26/04 (1)
            • List was wrong - Peter Florance 21:23:35 10/26/04 (0)
          • welcome to the community...lol - jim at da shop 19:04:55 10/26/04 (5)
            • guess this would help......... - jim at da shop 19:06:31 10/26/04 (3)
              • Rock on now with some brand new components - Nate in Utah 00:51:46 10/27/04 (2)
                • Re: Rock on now with some brand new components - Peter Florance 04:01:17 10/27/04 (5)
                  • Re: Leatherique??? - Rebecca Downey 05:37:07 11/26/04 (0)
                  • Re: Leatherique??? - Ron Wagner 14:53:05 11/15/04 (0)
                  • Said a bmw shop did the rebuild... - Nate in Utah 14:01:59 10/27/04 (0)
                  • Re: Leatherique??? - Joy Ford 08:56:05 10/27/04 (1)
                    • complaint sent to anonymizer.com - Peter Florance 16:59:26 10/27/04 (0)
            • guess this would help......... - jim at da shop 19:06:11 10/26/04 (0)
• Price on e21 runners? - Bill Hynes 14:54:03 10/25/04 (3)
  • $45 is a very cheap performance upgrade. - Michael R from Melbourne 17:52:33 10/25/04 (0)
  • Re: Price on e21 runners? - Art in CA 17:05:19 10/25/04 (0)
  • Re: Price on e21 runners? - Tom Masters 15:14:12 10/25/04 (0)
• Paging: Adam W Regarding Flywheel & HB - Misha 12:46:09 10/25/04 (5)
  • flywheel - Adam Wilson in Chicago 07:03:49 10/26/04 (4)
    • Re: flywheel - Misha 10:34:30 10/26/04 (1)
      • Fahey crank hub - Adam Wilson in Chicago 11:17:16 10/26/04 (0)
    • Thoughts on the harmonic balancer - Big Dog 09:15:19 10/26/04 (1)
      • Re: Thoughts on the harmonic balancer - Misha 12:36:03 10/26/04 (1)
• Diff rebuilder in the South SF bay area anyone? - Bob/E12/6er 10:28:04 10/25/04 (0)
• Fan clutch troubles (very frustrating)... - Tulsa Dave 09:25:18 10/25/04 (1)
  • Nope. No trouble. In fact , , , - Jeff (Atlanta) 10:15:40 10/25/04 (0)
• COTM July 2004 -- truly a heart warming story >> - chrystobal 05:10:47 10/25/04 (1)
  • Thanks, and get another E12!! - Greg J 18:39:14 10/25/04 (0)
• 4 X 6 Speakers - Dan Lafley 01:37:29 10/25/04 (8)
  • Re: 4 X 6 Speakers - Matt C 06:49:51 10/26/04 (0)
  • Re: 4 X 6 Speakers - Ryan Bryan 11:25:22 10/25/04 (0)
  • Re: 4 X 6 Speakers - Jeff (Atlanta) 10:25:26 10/25/04 (0)
  • Re: 4 X 6 Speakers - KSBinVA 06:35:54 10/25/04 (0)
  • Re: 4 X 6 Speakers - TOM 06:32:21 10/25/04 (3)
    • i am sticking with 4 x 6s... - Dan lafley 10:21:21 10/25/04 (2)
      • From ALL the speakers I've seen, Infinity Kappa! - Nate in Utah 19:29:49 10/25/04 (1)
        • Re: From ALL the speakers I've seen, Infinity Kappa! - Will Ollison 06:08:10 10/26/04 (0)
• Motronic/L-Jet conversion won't run, what am I mis - Garrett 20:33:17 10/24/04 (4)
  • Re: Motronic/L-Jet conversion won't run, what am I mis - ...tom 08:10:28 10/25/04 (3)
    • Almost there, but there's still a low rpm stumble - Garrett 22:09:34 10/28/04 (0)
    • Those threads may have led me to the problem ... - Garrett 14:00:51 10/26/04 (1)
      • Kind of - Mike W. 22:20:38 10/26/04 (0)
• Anyone need a ZF-3HP22 Transimssion? - Tomas Tupy 19:28:03 10/24/04 (2)
  • check w/ the e23 guys - ChuckNC 09:14:32 10/26/04 (0)
  • That's a Great Price - John in Simi Valley 23:51:41 10/24/04 (0)
• Clutch Doesn't Disengage all the way sometimes - TomasTupy 19:04:37 10/24/04 (7)
  • a plastic connector - ChuckNC 06:33:43 10/25/04 (0)
  • Re: Clutch Doesn't Disengage all the way sometimes - Mike W. 23:13:01 10/24/04 (2)
    • bleeding - Tomas Tupy 23:35:08 10/24/04 (1)
      • Re: bleeding - Craig in Davis 07:55:47 10/25/04 (0)
  • Re: Clutch Doesn't Disengage all the way sometimes - Jared in S-W 21:57:36 10/24/04 (2)
    • No i didn't, so ill do that next weekend - Tomas Tupy 22:18:18 10/24/04 (1)
      • Been there....... Done that - Jared in S-W 16:49:44 10/25/04 (0)
• 530I California Smog Legal Engine Swap - Bob Scott 17:44:38 10/24/04 (2)
  • Re: 530I California Smog Legal Engine Swap - Mike W. 23:28:43 10/24/04 (1)
    • Re: 530I California Smog Legal Engine Swap - Bob Scott 06:40:36 10/25/04 (0)
• where'd my engine go? - Adam Wilson in Chicago 16:20:32 10/24/04 (4)
  • Re: where'd my engine go? - Brian in Calgary 22:09:52 10/31/04 (0)
  • Great Pic!! - Nathan in Spokane 09:21:18 10/25/04 (0)
  • that's a great project, man. BTW the flintstoness> - chrystobal 04:54:53 10/25/04 (0)
  • LOL!!! - Gavin 04:28:29 10/25/04 (0)
• Auto-to-conversion Works!!!! - Tomas Tupy 15:53:50 10/24/04 (0)
• What is Wrench Size of AT cooler lines? - Brad In Texas 14:57:27 10/24/04 (1)
  • Re: What is Wrench Size of AT cooler lines? - The rev. 18:10:19 10/24/04 (0)
• getrag 262 oil - Tomas Tupy 14:23:35 10/24/04 (6)
  • You can but you shouldn't - Mike W. 15:05:26 10/24/04 (5)
    • Damn! May have done something dumb? - Gavin Gray 04:31:18 10/25/04 (1)
      • in lieu of Mike W. ... - Lenny D. 11:49:47 10/25/04 (0)
    • Re: You can but you shouldn't - Tomas Tupy 15:48:18 10/24/04 (2)
      • Re: You can but you shouldn't - Mike W. 22:56:54 10/24/04 (1)
        • Great now I have to rechange my oil - F.E. 17:45:37 10/25/04 (0)
• Electrical problem? - Bill Hynes 11:11:10 10/24/04 (5)
  • ground strap - Peter Florance 04:07:08 10/25/04 (0)
  • Replace fuse anyway - Remy Davison 17:27:21 10/24/04 (1)
    • It was a fuse... - Bill Hynes 14:49:20 10/25/04 (0)
  • Re: Electrical problem? - Damien in Sydney 14:14:20 10/24/04 (0)
  • Re: Electrical problem? - Dan J 12:30:43 10/24/04 (0)
• Boot lock info for Michael R feom Melbourne - Craig in Davis 10:57:00 10/24/04 (1)
  • Thanks Criag - Michael R from Melbourne 15:36:38 10/24/04 (0)
• Griot's Garage Catalog Car - Greg W 21:42:59 10/23/04 (0)
• 5-speed conversion for sale, again - Mike W. 16:56:48 10/23/04 (6)
  • Re: 5-speed conversion for sale, again - Bob in San Jose 01:04:45 10/24/04 (0)
  • thats a smokin deal..!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - jim at da shop 19:23:12 10/23/04 (4)
    • Re: thats a smokin deal..!!!!!!!!!!!!!!!!!!!!!!!!! - Mike W. 20:30:55 10/23/04 (3)
      • Re: thats a smokin deal..!!!!!!!!!!!!!!!!!!!!!!!!! - jim at da shop 23:45:16 10/23/04 (2)
        • Talk to me Jim... - Mike W. 23:32:08 10/24/04 (1)
          • Re: Talk to me Jim... - jim at da shop 07:42:16 10/25/04 (0)
• Archived! Archive XL will be available soon! - Troy Rudolph (Webmaster) 16:38:15 10/23/04 (1)
  • Re: Archived! Archive XL will be available soon! - Mike W. 20:45:40 10/23/04 (0)