Manual Antenna Repair

Post your E12 technical questions and comments here. Please, no off-topic posts.

Moderators: Mike W., Pierre

Post Reply
User avatar
528i-1981
Posts: 557
Joined: Wed Feb 07, 2018 5:50 am
Location: Franklin, TN

Manual Antenna Repair

Post by 528i-1981 »

It was just a matter of time before I broke the antenna pulling the cover off my car. Luckily the break was clean. Here's a low-cost and low-hassle solution, instead of replacing.

Image

Using a cut length of 3/8 polished rod ($4 from Tractor Supply) as an insert, the bottom wedges nicely into the bottom taper of the antenna body (the base still attached to the car), but the top is loose.

Image

A few turns of 1/4 inch conducting copper tape (amazon.com) snugs up the fit. Shown below is the copper tape before being pushed up into the antenna body.

Image Image

The upper part of the antenna is now easily removable if need be by pulling the rod from the base, and the repair is virtually invisible. Reception is as it was before.
(oo=00=oo) Eric
1981 528i Manual
Post Reply