Page 1 of 1
Strut Cartridge Removal
Posted: Thu Mar 24, 2011 11:31 am
by socalfiver
The caps that hold the front strut cartridge in place inside the strut tube on my car need to be tightened. Does anyone know what the tool is called that allows me to tighten these? Or where I may be able to buy one?
Re: Strut Cartridge Removal
Posted: Thu Mar 24, 2011 11:37 am
by Blaise
socalfiver wrote:The caps that hold the front strut cartridge in place inside the strut tube on my car need to be tightened. Does anyone know what the tool is called that allows me to tighten these? Or where I may be able to buy one?
If you are using Bilsteins, then you can use the tool that Bilstein sells ($5).
Posted: Thu Mar 24, 2011 12:03 pm
by socalfiver
They are not bilsteins. I have a spare set of strut assemblies with bilsteins, but they are in severe need of rebuilding.
They are KYBs and use the original style caps.[/list]
Posted: Thu Mar 24, 2011 1:50 pm
by Mike W.
16" channellocks or 14" pipe wrench. Either works. Use a cheater on the pipe wrench if you need to loosen them and they're too tight.
Posted: Thu Mar 24, 2011 2:12 pm
by socalfiver
I see... a sophisticated special tool.
I was gonna try channel locks. Thanks!!
Re: Strut Cartridge Removal
Posted: Fri Mar 25, 2011 12:01 pm
by waltb
I will second the big pipe wrench and cheater pipe. That's how I have done struts for years.
Walt B.