Main harness plug removal

[T.Hanson]

In the glove box, lift curtain, push tab, pull big ecu plug. Pry rotten grommet thing out of firewall.

Good. Then what ? Take glove box all apart, fuddle inside grommet out, have friend feed big plug out screwy inside, outside firewall holes ?

I'd like to do it the pro way, not the mule and chain way.

[Mike W.]

That and lube it up with some silicone spray so it slides out.

[alotawatts]

Just did mine. As Mike says - shoot the inner grommet with silicone then push it through(out) with a large screw driver. Odds are your engine bay / outer grommet is rotten enough to not need lube. The harness and plug just bend and snake out through the outside.