M30B28 turbo distributor problem

babisbabou · Post by **babisbabou** » Fri Feb 27, 2009 8:34 pm

Hello everyone, after reading this :http://www.firstfives.org/faq/throttle/throttle.html

and almost every FAQ in that forum i figured out that i have to use a non return valve at the vacuum hoses that connect to the distributor am i right?

I have an E28 with a M30B28 DIY turbo and after 4k rmp when on full boost(0,4bar) the car stops accelerating violently and spits fire and boom boom from the exhaust, i guess it must be that the boost retards the advance, any other ideas?

babisbabou · Post by **babisbabou** » Mon Jan 11, 2010 8:15 pm

If by chance anyone else had the same problem it was caused do to extreme fuel enrichment, solved by tightening the AFM spring.

Odometergears · Post by **Odometergears** » Tue Jan 12, 2010 8:44 pm

Glad you figured it out. Next step for you is to convert to MegSquirt. I'll be back on the road in about two months with my m106 TCD turbo.

Jeff
www.odometergears.com
1980 528i converted to 3.5T

babisbabou · Post by **babisbabou** » Wed Jan 13, 2010 4:58 am

Thank you man!
Indeed this is the only step to be next step

YouTube · Post by **Peter Florance** » Wed Jan 13, 2010 6:19 am

I should mention that you should not use a anti-return valve on the distributor.

Glad the fuel worked out. Enjoy!

babisbabou · Post by **babisbabou** » Wed Jan 13, 2010 7:06 am

Peter Florance wrote:I should mention that you should not use a anti-return valve on the distributor.

Glad the fuel worked out. Enjoy!

yes, this thing is out of the car