Some were covered. If covered how is the cover removed to allow the unit to be removed from the shaft ?
Using the plug from the harness, if it fits the unit, are they interchangeable ?
Throttle body microswitches
The covered switch mounts by ears, then just pulls off the shaft. I believe all E12 switch assemblies are the same, but E28 might be close enough to fit on, and at least some of them rotate and switch in the opposite direction. Get any E12 switch and it'll be ok. FWIW, 530s used the single switch assembly and 528s used the separate switches.
Mike W.
02 525ita. Wife's, aka grocery getter
02 530i. New to the fleet, 3 pedals.
03 QX4, AKA the Datsun. Finally got the 4WD vacationmoble to stop smoking.
07 Xterra. Still on the DL, a purchase from hell.
02 525ita. Wife's, aka grocery getter
02 530i. New to the fleet, 3 pedals.
03 QX4, AKA the Datsun. Finally got the 4WD vacationmoble to stop smoking.
07 Xterra. Still on the DL, a purchase from hell.
-
CabbageFumes
- Posts: 342
- Joined: Tue Oct 21, 2014 7:07 pm
- Location: Funkytown